Error Extending eDirectory Schema for Radius in iManager

I am working on integrating eDirectory with FreeRADIUS on our OES 11 SP2 servers. I have been following all the steps in the "Integrating Novell eDirectory with FreeRADIUS" guide located here: https://www.netiq.com/documentation/edir_radius/. I did not have any problems installing FreeRADIUS or modifying its config files for LDAP authentication.
I am now stuck trying to extend the eDirectory schema for radius. In iManager, I go to Roles and Tasks --> radius --> Extend Schema, and I keep getting the following error: "RADIUS plugin encountered an error. Click the Details button for more information." When I click "details" it shows the following:
java.lang.NullPointerException\n at java.util.StringTokenizer.(StringTokenizer.java:88 )\n at java.util.StringTokenizer.(StringTokenizer.java:66 )\n at com.novell.ldap.LDAPConnection.connect(Unknown Source)\n at com.novell.nps.radius.NovellLDAPAuthenticator.logi n(NovellLDAPAuthenticator.java:155)\n at com.novell.nps.radius.ExtendRadiusSchema.showIniti alForm(ExtendRadiusSchema.java:178)\n at com.novell.nps.radius.ExtendRadiusSchema.execute(E xtendRadiusSchema.java:96)\n at com.novell.emframe.dev.Task.execute(Task.java:505) \n at com.novell.nps.gadgetManager.BaseGadgetInstance.pr ocessRequest(BaseGadgetInstance.java:858)\n at com.novell.nps.gadgetManager.GadgetManager.delegat eToGadget(GadgetManager.java:4256)\n at com.novell.nps.gadgetManager.LaunchService.onDeleg ateAction(LaunchService.java:86)\n at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)\n at sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:60)\n at sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:37)\n at java.lang.reflect.Method.invoke(Method.java:611)\n at com.novell.nps.gadgetManager.BaseGadgetInstance.ha ndleAction(BaseGadgetInstance.java:2371)\n at com.novell.nps.gadgetManager.GadgetManager.process InstanceRequest(GadgetManager.java:1609)\n at com.novell.nps.gadgetManager.GadgetManager.process ServiceRequest(GadgetManager.java:1062)\n at com.novell.nps.PortalServlet.handleFrameService(Po rtalServlet.java:509)\n at com.novell.nps.PortalServlet.processRequest(Portal Servlet.java:373)\n at com.novell.nps.PortalServlet.doPost(PortalServlet. java:279)\n at com.novell.nps.PortalServlet.doGet(PortalServlet.j ava:262)\n at javax.servlet.http.HttpServlet.service(HttpServlet .java:617)\n at com.novell.emframe.fw.servlet.AuthenticatorServlet .service(AuthenticatorServlet.java:332)\n at javax.servlet.http.HttpServlet.service(HttpServlet .java:717)\n at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:290)\n at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:206)\n at com.novell.emframe.fw.filter.CrossScriptingFilter. doFilter(CrossScriptingFilter.java:25)\n at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:235)\n at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:206)\n at com.novell.emframe.fw.filter.AntiCsrfServletFilter .doFilter(AntiCsrfServletFilter.java:275)\n at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:235)\n at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:206)\n at org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.java:233)\n at org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.java:191)\n at org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase.java:530)\n at org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:128)\n at org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:102)\n at org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java:109)\n at org.apache.catalina.connector.CoyoteAdapter.servic e(CoyoteAdapter.java:286)\n at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyo teHandler.java:190)\n at org.apache.jk.common.HandlerRequest.invoke(Handler Request.java:291)\n at org.apache.jk.common.ChannelSocket.invoke(ChannelS ocket.java:769)\n at org.apache.jk.common.ChannelSocket.processConnecti on(ChannelSocket.java:698)\n at org.apache.jk.common.ChannelSocket$SocketConnectio n.runIt(ChannelSocket.java:891)\n at org.apache.tomcat.util.threads.ThreadPool$ControlR unnable.run(ThreadPool.java:690)\n at java.lang.Thread.run(Thread.java:761)\n
Can anyone give me an idea of what is going on here? Everything I've been able to dig up so far has dealt with schema conflict errors and ssl/tls connection issues. I don't think that is what's going on here. I am getting the same error on multiple servers with eDirectory and iManager installed. Any help is appreciated. Thank you.
Scot

Originally Posted by bjunker
I am working on integrating eDirectory with FreeRADIUS on our OES 11 SP2 servers. I have been following all the steps in the "Integrating Novell eDirectory with FreeRADIUS" guide located here: https://www.netiq.com/documentation/edir_radius/. I did not have any problems installing FreeRADIUS or modifying its config files for LDAP authentication.
I am now stuck trying to extend the eDirectory schema for radius. In iManager, I go to Roles and Tasks --> radius --> Extend Schema, and I keep getting the following error: "RADIUS plugin encountered an error. Click the Details button for more information." When I click "details" it shows the following:
Can anyone give me an idea of what is going on here? Everything I've been able to dig up so far has dealt with schema conflict errors and ssl/tls connection issues. I don't think that is what's going on here. I am getting the same error on multiple servers with eDirectory and iManager installed. Any help is appreciated. Thank you.
Scot
Seems like there is a know bug for this issue, I suggest you to open a SR if you can?
Thomas

Similar Messages

Extending eDirectory schema for OIF Federation Data Store

Since I couldn't find ldif files specifically for eDirectory (Novell Directory Server), I tried extending the schema using the OpenLDAP and GENERIC schema files. Both attempts failed for file format reasons.
Has anyone been succesfull updating their eDirectory schema?
Thanks

I hope you know that eDirectory is not supported - http://www.oracle.com/technology/software/products/ias/files/idm_certification_101401.html#BABHFBCC
Like any LDAP-compliant server eDirectory has its own idiosyncracies and you might hit issues because OIF using eDir as the federation data store has not been QA-ed by Oracle.
-Vinod

I need to extend the schema for iPlanet Dir. 5.0 and add custom objectclasses and atributes. I do this by adding entries in the 99user.ldif file. Its not working. Any ideas?

Hi
I need to extend the schema for iPlanet Dir. 5.0 and I do not want to do so from the console. As per the documentation, I need to either add entries in the 99user.ldif file or define my own custom [00-99]myname.ldif file. I tried this but its not working.
I have made the assumption that there is no explicit import step for the 'user defined' schema files (as it is for user data ldif files). I assume that on start (or on opening the console), I'd be able to see the new schema after the server has read the schema file.
I have verified that entering new objectclasses and attributes from the console adds entries into the 99user.ldif file. So why is the reverse process not working. Can anybody throw some light on this? Also in case my assumptions are faulty, please let me know.
I did not change the aci entries in the existing ldif file. Is any modification needed there? I was logged in as the Directory Manager during this testing process.
regards
Sikka ([email protected])

Hi Sikka,
The server reads its schema configuration on startup. If you manually modify the schema files while the server is running, it will not have any effect. You have to restart the server.
The console adds the new schema elements over LDAP (you could do that as well, you only have to modify the cn=schema entry), so the server is aware of the changes immediately and thus restarting is not needed.
I hope this helps.
Bertold

How to extend AD schema for Exchange

Hi,
Please can someone help me understand the process for extending AD schema for Exchange?
I’m concerned because there are some cautions noted generally in the process so i’m looking for best practice to ensure extending in a safe and smooth manor.
Bit of background on our environment -
Moving to Office365 in a hybrid environment, never used Microsoft products for email.
New On-prem AD Physical DC, 2012 Server with DirSync to Azure/ O365
OU’s populated with objects.
Would like to manage users and distribution groups from within AD on-prem.
Many thanks,
Leo.

It is recommended to have at least two DC/GC servers for HA.
We are using Office 365 too for 65k + and we do have Powershell scripts to make the attribute changes and identify users with missing or incorrect messaging attributes. So, you might think about using Powershell scripts too.
65K? That's the largest I've heard yet! Are you in an educational environment? That's what I understand and should have pointed out. We are a university and the first to use O365 consolidating Google, Notes and Mirapoint active mailboxes. We still
haven't touched Alumni, which are on Google. That would take us to the 75k level, but that discussion is on a backburner.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Error when create schemas for webcenter using URM.

Hi,
I use Oracle Urm to create necessary schemas for Webcenter. Everything goes well when I create the tables.
However, when I extend my domain with Webcenter, comes to the database connection testing step, the tests always fail.
It said: A connection is establish but no result received from the Test query.
I ignored the test but then later, start the WLS_Spaces manage server, the server can't start because of database error, the needed tables not found.
I use SQl Developer to connect to the database but can't see those newly created tables.
But during the URM step, nothing went wrong.
Can you help me with this?
Thank you very much.

Hi Heather,
The reason that you are receiving this error is because the niscope.h file (called by niScope.fp) uses a struct which cannot be compiled into a DLL. This means that the niScope.fp file cannot be included in the target settings. Here's a knowledgebase that describes the error.
http://digital.ni.com/public.nsf/websearch/AC028D9586E947F08625661E006A182F?OpenDocument
If you do want the niScope.fp file to be included then you will need to make some modifications to the niscope.h file and create a typedef for the niScope_wfmInfo struct. Here's info from the help file that describes the type library section and the use of the .fp file.
"Type Library—This button lets you choose whether to add a type library resource to your DLL. Also, you can choose to include links in the type library resource to a Windows help file. LabWindows/CVI generates the type library resource from a function panel (.fp) file. You must specify the name of the .fp file. You can generate a Windows help file from the .fp file by using the Generate Windows Help command in the Options menu of the Function Tree Editor window.
This feature is useful if you intend for your DLL to be used from Visual Basic."
If you do not include the niScope.fp file then you will be able to compile the DLL.
Hope this helps! Let me know if you have any questions.
Erick

Error while uploading schema for Master Catalog

Guys,
I got the below error while uploading Schema with custom char for Master catalog;
"Error in row 11 of the CSV file" where as the 11th row is "DataType;INTEGER;integer;Integer Type"
in the csv file. Please suggest.
Regards
TGB

Hi,
Check txn-SLG1 in SRM system. There if you go to details, you will see exact description of error.
There are some dos and donts for csv files. for e.g you can't put : , / etc.symbols in the csv file.
Regards,
Sanjeev

Error - Invalid parsing schema for current workspace id

Hello,
Users logging into an application occasionally get a strange error: ORA-20104: create_collection_from_query_b Error:ORA-20001: Invalid parsing schema for current workspace ID.
The error occurs during a post authentication process. Does anyone know what could cause these in general or why it might only occur during the first login of the day?
Regards,
Dan
http://danielmcghan.us/
http://sourceforge.net/projects/tapigen/

Scott,
Today the error mentioned in the last post occurred 3 times - the highest number in a single day yet. Also, to add to the dilemma, a new one occurred:
ORA-20104: create_collection_from_query_b Error:ORA-20101: Application collection exists
Knowing that the create collection process is called from a post authentication process I don't see how that the collection could exist for that session... Any ideas?
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

Extending AD schema to sync to Office365

Hi, we currently are running a fresh AD environment that has never been exposed to Exchange. We are running DirSync to sync AD to Office365 (one way). We're currently unable to manage several attributes due to not ever having an Exchange installation, so
we simply need to extend our AD schema to add the necessary attributes. This seems to be a somewhat common problem, but there doesn't seem to be any official documentation/procedure for fixing. Here's a few things that really need clarification, for anyone
looking to extend their schema for Office365 purposes:
1. Which Exchange installation to use to extend schema?
2. The objects that were synced to Office365 initially had some of the attributes we're now missing. Should we be concerned about overwriting these attributes with null values after the schema extension? What is the best method to address these concerns?
Is there a list of attributes provided by the schema extension so we can check what may be overwritten?
Thanks and please help!

1. Which Exchange installation to use to extend schema?
I always used Exchange Server 2013.
2. The objects that were synced to Office365 initially had some of the attributes we're now missing.
Should we be concerned about overwriting these attributes with null values after the schema extension?
If something is wrong with the sync then you should be able to see it on DirSync after the sync attempt. The list of synced attributes is mentioned here: http://social.technet.microsoft.com/wiki/contents/articles/19901.dirsync-list-of-attributes-that-are-synced-by-the-azure-active-directory-sync-tool.aspx
Of course, the data are synced from AD to Office 365 so you need to take in consideration that your data will be overwritten. The good approach would be to populate these attributes in AD before running the sync.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Extending AD Schema (Unity 4.0(2))

We are currently running Unity 4.0(2) with Exchange 2000 as a partner. We need to upgrade to the latest shipping Unity version and reconfigure Unity to communicate with Exchange 2003. Do we need to extend AD schema again? If so, what is the difference between extending the schema for Exchange 2000 and Exchange 2003? Will this not cause duplicate entries in AD?

Hi Andy,
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/rug/ex/ru_110.htm#wp1359133
Yes, extend the schema again, On Cisco Unity DVD 1 or CD 1, or from the location to which you saved the downloaded Cisco Unity CD 1 image files, browse to the directory ADSchemaSetup, and double-click ADSchemaSetup.exe
To see the changes that the schema update program makes, browse to the directory Schema\LdifScripts on Cisco Unity DVD 1 or CD 1, and view the file Avdirmonex2k.ldf.
Schema Changes in Exchange Server 2003
http://www.microsoft.com/technet/prodtechnol/exchange/guides/WhatNewE2k3/aa9bc812-6f7f-4892-8bf0-06f5eff204bb.mspx?mfr=true
Upgrading from Exchange 2000 Server to Exchange Server 2003
http://www.microsoft.com/technet/prodtechnol/exchange/guides/Ex2k3DepGuide/428e1090-c8a4-492c-9079-92ff2b588d55.mspx?mfr=true
Main differences between Exchange 2000 and 2003.
Improved security, including all those of IIS v 6.0.
HTTP over RPC means you do not need to configure a VPN for OWA.
Up to 8 node Active / Passive clustering.
Volume Shadow Copy for backup.
Super upgrade tools like ExDeploy.
pfMigrate utility to move public folders from legacy systems.
An attempt to control Junk email both on the client and the server.
Upgrade should go fine and no duplicate entries will be created.
HTH
//G

Error Extending 2012 R2 AD Schema for Exchange 2013 RTM/CU6/CU7 (for Office 365 attributes)

Hello all,
I am a sysadmin at a 3 campus school, and am trying to extend our AD schema to include Exchange 2013 attributes so that we can configure groups synced to Office 365 using DirSync. However it keeps failing at the same point each time.
I have tried with RTM first, and then CU6, but I keep getting the same error and am unsure how to fix it.
"repadmin /showrepl" says that our 3 DCs are replicating with no issues, and I'm trying to extend the schema using an "Enterprise Admin"/"Schema Admin" account on our schema master DC.
Our domain/forest functional level is Server 2008R2, and we do not have an Exchange server set up already - if that helps.
The PowerShell error is:
PS C:\Users\rbbr\Desktop\Exchange> .\setup /PrepareSchema /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Cumulative Update 6 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Configuring Microsoft Exchange Server
Extending Active Directory schema FAILED
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to impor
t the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be
found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object ta
rget, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String
schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePip
elineIfFailed)".
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
And ldif.err says:
Entry DN: CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan
Add error on entry starting on line 452: Unwilling To Perform
The server side error is: 0x20bb Schema update failed: duplicate OID.
The extended server error is:
000020BB: SvcErr: DSID-032603C0, problem 5003 (WILL_NOT_PERFORM), data 8379
An error has occurred in the program
The schema attribute "CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan" does exist in the schema, but I don't know what to do or where to go from here.
Any assistance would be greatly appreciated.

I just tried .\setup /PrepareAD /OrganizationName:kurnaicollege /IAcceptExchangeServerLicenseTerms, and got the exact same error as above.
Is there a way to delete the offending schema attributes, or to force its overwrite or something?
EDIT: I am also getting these eventvwr errors when running /PrepareAD, if it helps:
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Proxy Instance Count
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
3540 NBBPassThruAuth_Helper
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1704 conhost
1540 svchost
4492 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
520 svchost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
4440 NBBPassThruAuth_Helper
3648 conhost
884 svchost
1080 vmtoolsd
3440 conhost
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
4760 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Base for Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetup.exe
4768
Get Servers for kurnai.lan
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.1106192. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Time in Resource per second
MSExchange Activity Context Resources
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
4168 dwm
776 MsMpEng
2940 dllhost
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
712 WmiPrvSE
2088 dfssvc
1692 MSOIDSVCM
960 svchost
304 csrss
4436 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
4388 mmc
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
1644 MSOIDSVC
3416 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Activity Context Resources : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange activity context resources. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0938055
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0312685
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:02.1887925
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeOrganization
-Industry "NotSpecified" -PrepareDomain "True" -DomainController "C-Server1.kurnai.lan" -ActiveDirectorySplitPermissions $null -PrepareOrganization "True" -PrepareSchema "True" -OrganizationName "kurnaicollege"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
31
00:03:01.8261106
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)". ---> Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
--- End of inner exception stack trace ---
7
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
Ex88D115
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table

DPM 2012 End User Recovery - Extending AD Schema tool crashes with error

Hi everyone,
I deployed SCDPM 2012 R2 in my test environment, but it is an issue. When I'm trying to extend AD Schema by DPMADSchemaExtensionTool.exe, it stops to working with an appcrash message:
Problem signature:
Problem Event Name: APPCRASH
Application Name: dpmdsacl.exe
Application Version: 4.2.1092.0
Application Timestamp: 51b1e89d
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.3.9600.16384
Fault Module Timestamp: 5215fa76
Exception Code: e0434352
Exception Offset: 0000000000008384
OS Version: 6.3.9600.2.0.0.272.7
Locale ID: 1033
Additional Information 1: 7644
Additional Information 2: 7644cee486badc818e8a96bb7aba3bfd
Additional Information 3: 2ddc
Additional Information 4: 2ddcde93bf91b9ddbb6e1a89fb9b5892
When I'm trying to do the same with cmd I get an error:
C:\diagEUR>dpmdsacl.exe sc.local CN=MS-ShareMapConfiguration,CN=System,DC=sc,DC=
local /A sc\dpm$
Unhandled Exception: System.IO.FileLoadException: Could not load file or assembl
y 'dpmdsacl, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
' or one of its dependencies. Strong name validation failed. (Exception from HRE
SULT: 0x8013141A) ---> System.Security.SecurityException: Strong name validation
failed. (Exception from HRESULT: 0x8013141A)
--- End of inner exception stack trace ---
How can I fix this error?

Hi Seth,
I think your script will be useful, please share them
Here it is. It does the same items that the DPM tool does to the domain, with a few extra steps noted at the top.
We create a group that has the permissions on the container, with the hope that one day, this feature will be available (DCR submitted). In our support model, we would rather delegate permissions to support personnel to modify group membership than
modify ACLs on system containers.    Your opinion on this may differ, so, feel free to remove it.
It also gives our support personnel permissions to modify the sharemap container - so they can enable DPM EUR servers later.
Both of these have been working fine for preparing a domain / enabling EUR. Preparing the domain is run by domain admin, then, we leave enabling EUR to our support staff.
Remember, this is not supported, this just makes the same changes that the EUR tool does. You should use the EUR tool from Microsoft.
#Requires -version 2.0
# File:      DPMEndUserDomainPrep.ps1
# Version:   0.1
# Purpose:   Domain Preparation for DPM End User Recovery
# Tasks compelted by this script:
#      -Create MS-ShareMapConfiguration container in System container of the domain
#            -Create the security group (NETBIOS Domain Name) DPM End User Recovery servers
#      -Give Create,Delete MS-srvShareMappingObjects, ListChildren permissions for the newly created group, on the new MS-ShareMapConfiguration container
#      -Find <SUPPORT GROUP> group in the forest root, and grant full permissions to the MS-ShareMapConfiguration container
Param(
[string]$domain
if ($domain -eq "")
write-host ""
write-host "Script Usage" -foreground cyan
write-host "-----------------" -foreground cyan
write-host "./DPMEndUserDomainPrep.ps1 -domain domain.com" -foreground cyan
write-host ""
exit
$Title = "DPM End User Recovery Domain Prep"
$Message = "Do you want to continue with domain prep for " + $domain + "?"
$Yes = new-object system.management.automation.host.choicedescription "&Yes","Continue with Domain Prep for $domain"
$No = new-object system.management.automation.host.choicedescription "&No","Exit the script"
$options = [System.Management.Automation.Host.ChoiceDescription[]]($yes, $no)
$result = $host.ui.PromptForChoice($title, $message, $options, 0)
If ($result -eq 1){exit}
# Load the AD module
Import-Module ActiveDirectory
# Figure out our domain
$root = (Get-ADRootDSE -server $domain).defaultNamingContext
#Get netbios domain name
$domainname = (Get-ADDomain -Identity $domain).NetBIOSName
#SchemaIDGuid for MS-SrvShareMapping Class
$ShareMapGUID = new-object guid c356f65b-5540-4d85-9aef-3a7ecae7a878
$guidNull = new-object Guid 00000000-0000-0000-0000-000000000000
        $guidGroupObject = new-object Guid BF967A9C-0DE6-11D0-A285-00AA003049E2
# Get or create the MS-ShareMapConfiguration container
$ou = $null
try
     $ou = Get-ADObject "CN=MS-ShareMapConfiguration,CN=System,$root"
catch
     Write-host "MS-ShareMapConfiguration container does not currently exist." -foreground yellow
if ($ou -eq $null)
     $ou = New-ADObject -Type Container -name "MS-ShareMapConfiguration" -Path "CN=System,$root" -Passthru
     write-host "Created Container $ou" -foreground yellow
     start-sleep -s 10
#Create DPM End User Recovery servers group
write-host "Creating group $domainname DPM End User Recovery Servers" -foreground yellow
new-adgroup -path "cn=builtin,$root" -name "$domainname DPM End User Recovery Servers" -groupscope universal -groupcategory security -description "Members of this group are delegated permissions to change contents of the System\MS-ShareMapConfiguration
container"
        start-sleep -s 10
$ServerGroup = get-adgroup "$domainname DPM End User Recovery Servers"
$ServerGroupsid = [system.security.principal.securityidentifier] $ServerGroup.sid
write-host ""
write-host "Created group $ServerGroup" -foreground yellow
#Get <SUPPORT GROUP>in Forest Root
$forestname = [System.DirectoryServices.ActiveDirectory.Forest]::GetCurrentForest().Name
#Check to see if <SUPPORT GROUP> group exists
$SupportGroup = $null
$SupportGroup = get-adgroup -server $forestname "<SUPPORT GROUP>"
if ($SupportGroup -eq $null)
  write-host ""
  write-host "WARNING - <SUPPORT GROUP> Group does not exist in the forest root" -foreground red
  write-host "Permissions must be manually assigned to the MS-ShareMapConfiguration Container for the <SUPPORT GROUP>" -foreground red
  write-host ""
$SupportGroupSID = [system.security.principal.securityidentifier] $SupportGroup.sid
#Get current ACL for the MS-ShareMapConfiguration Container
$OUacl = get-acl "ad:cn=ms-sharemapconfiguration,cn=system,$root"
#Create ACE for adding permissions to newly created group to MS-ShareMapConfiguration container
$ace1 = new-object system.directoryservices.activedirectoryaccessrule $ServerGroupsid, "CreateChild,DeleteChild", Allow, $sharemapguid,"all"
$ace2 = new-object system.directoryservices.activedirectoryaccessrule $ServerGroupsid, "ListChildren", Allow,$guidNull,"all"
$ace3 = new-object system.directoryservices.activedirectoryaccessrule $SupportGroupsid, "GenericAll", Allow,$guidNull,"all"
$OUacl.addaccessrule($ace1)
$OUacl.addaccessrule($ace2)
$OUacl.addaccessrule($ace3)
#Apply ACL
write-host ""
write-host "Setting ACLs on cn=ms-sharemapconfiguration,cn=system,$root" -foreground yellow
set-acl -aclobject $OUacl "ad:cn=ms-sharemapconfiguration,cn=system,$root"
#Get current ACL for the DPM End User Recovery Servers group
$ServerGroupDN = $servergroup.distinguishedname
$Groupacl = get-acl "ad:$servergroupdn"
$groupace = new-object system.directoryservices.activedirectoryaccessrule $SupportGroupsid, "GenericAll", Allow,$guidNull,"all"
$Groupacl.addaccessrule($groupace)
write-host ""
write-host "Setting ACLs on $servergroupdn" -foreground yellow
set-acl -aclobject $Groupacl "ad:$servergroupdn"
write-host ""
write-host "Script Complete" -foreground yellow
Seth Cohen

TF244069: An error occurred while checking the provisioning status of the reporting database schema for a PWA instance.

The command TfsAdmin ProjectServer /RegisterPWA causes next error:
TF244069: An error occurred while checking the provisioning status of the reporting database schema for a PWA instance.
Project Server returned the following error: "Server was unable to process request. ---> The request failed with HTTP status 401: Unauthorized.".
(type ProvisionException)
Exception Stack Trace:    at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionPwaDBSchema.HandleSoapException(SoapException soapException, String errorResourceString)
   at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionPwaDBSchema.IsDBSchemaProvisioned()
   at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionManager.Provision()
I installed SharePoint 2013 and Project Server 2013 as farm and TFS 2012 and my account has permissions everywhere. I read article
http://msdn.microsoft.com/en-us/library/gg412653.aspx and gave full permissions for TFS account to SQL and Project, Project app pool account to SQL, but still have an error.
How can I find out what exactly permissions are not enough???

The problem was in claims authentication. Changed to Windows and all worked out.

I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?

In 2012, I bought Photoshop CS6 Extended (education edition) for Mac. Now I want to install it on my new Macbook. I have the correct serial number and product code, but I receive an error message: the software may be a false copy etc....What to do?

Here is a copy of the error
This means : Installation failed.
Verification of the Adobe Software failed
The product you want to install is no valid Adobe product and seems to be falsified.
HUgo
Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Hugo please turn off your e-mail signature.
If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files. You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
To download a fresh copy of the installation files please see Download CS6 products.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Error in Sun XML schema for servlet2.4 deployment descriptor?

Hi,
I'm including the new XML schema for version 2.4 of the servlet standard in my web.xml deployment descriptor, using http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd
When I try to save the XML file, XMLSpy reports an error in the schema file itself: "Undefined schema component 'base' encountered - simpleContext can not have a base that is a complexType with complexContent"
This error is on line 744, and is caused by the snippet:
<xsd:simpleContent>
<xsd:extension base="j2ee:nonEmptyStringType"/>
</xsd:simpleContent>
Can anyone explain why I'm getting a validation failure on this schema? Surely someone else must have experienced the same thing, but I can't track down any reference to it anywhere. Help!

XMLSpy is known to be flawed. From my own experience of implementing
validators and data-binding tools, and from my experience of working in the
W3C Schema working group, I can tell you that there are countless cases
where XMLSpy violates the schema specification.
I checked the corresponding part of the schema, but it looks correct to me.
So I suspect that this is another bug in XMLSpy.
Try Xerces. That's probably the best in terms of conformance to the spec.

Error installing olaptrain sample schema for OLAP Cubes

I want to install olaptrain schema for OLAP cubes. It has been the error when I apply the procedures. My password is also correct. This error is attachment link.
http://1ercanyagmur9.blogspot.com.tr/2014/01/error.html

The error link that you pasted in this post is no longer available.

Error Extending eDirectory Schema for Radius in iManager

Similar Messages

Maybe you are looking for