Error Facing in HTTP_Server
Hi every one,
pls help me out regarding below problem.
I am facing this problem during startup of HTTP_Server
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=app_prod:6201
5 of 6 processes started.
ias-instance id=asdb1.app_prod.jslerp.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=2764916)
failed to start a managed process after the maximum retry limit
Log:
/u04/AppServer/OraHome_2/opmn/logs/HTTP_Server~1
Hi ,
A cause can be when access.log (Apache/Apache/logs/access_log) grows more than 2Gb in size
Look in
/u04/AppServer/OraHome_2/opmn/logs/HTTP_Server~1
for a more detailed reason of the error . You should find a line with text "Start process" and after this probably more information
about why it cannot be started
BR,
Mihai
Similar Messages
-
Errors on Oracle HTTP_Server
Receiving errors under the HTTP_Server component of a new Linux Grid install (patched to 10.2.0.2) relating to the following:
"Percentage of Requests that Were Failures" and "Percentage of Requests Resulted in Internal Errors" which according to the help are "The percentage of total number of requests routed for all the mount points that were failed requests" and "The percentage of total number of requests routed for all the Mount Points that resulted in internal errors" respectively. Any one know where to look to try to decipher the cause of these? This is the first install we've done using RAC. I've done a number of pervious installs with everything on one server and have never seen this issue before. Thanks.Very curious if anyone has input to original question. I am in the same position - I've recently installed 10.2 GC and seeing the same alerts. I have not even been able to determine which log file is being parsed to raise these alerts. Perhaps if I knew that I would look at the errors and research from there.
Thanks in advance... -
Error facing while printing a hard text in a form ...
hi i am facing a error while debugging a f orm
the text is not being printed for second page onwards
as shown below the first char 3pl comes whille debugging and then the window goes to next as shown below and dont cmplete the remaining text and neither print that
<b>Form EN z_LIST_PH3 Page NEXT 4 Window INFO
Function WRITE_FORM 0
<u>Event CHAR 3PL </u>
Element </b>
....+ V .1........2........3........4........5........6........7..
/: IF &ZPLBL& = 'C000'
IN <B>3PL Code,,:</>,,'Not Required'
/: ELSE
> IN <B>3PL Code,,:</>,,&ZPL&
/: ENDIF
on doing f5 the cursor should go inside the line and print 3pl and then code but it shows only 3pl and dont print it from second page onwards
it does print whole 3pl code.... text for first page but not from second page onwads
can anyone suggest on this error or its cause or wht to do to remove this/
regards
Arorahi
the content of zplbl doesnt matter and it is coming as tehre are two codition if
not c001 then print ;3gl code = required
esle print 3gl code value from program
hence this priting of 3gl code is not being executed for second page for first page it is printing not for second page....
here is the code i already pasted above the code while debugging
/: PERFORM GET_LABEL_CODE IN PROGRAM ZPICK_LIST_PH3
/: USING <AK-VBELN&
/: USING <AP-POSNR&
/: CHANGING &ZINT&
/: CHANGING &ZPLBL&
/: ENDPERFORM
/: IF &ZINT& = 'I000'
IN <B>Inter Code,,:</>,,'Not Required'
/: ELSE
IN <B>Inter Code,,:</>,,&ZINT&
/: ENDIF
this above is bwing printed for both pages but my code as below is not being printed for second page onwards and in debugging it goes to this line second in <b> the shows 3pl and suddenly jumps from here to next window and dont even executes next perform immediately afete it for second page onwards
/: IF &ZPLBL& = 'C000'
IN <B>3PL Label Code,,:</>,,'Not Required'
/: ELSE
IN <B>3PL Label Code,,:</>,,&ZPLBL&
/: ENDIF
/: PERFORM GET_SHIP_STATUS IN PROGRAM ZLIST_PH3
pls suggest
regards
Arora -
Error faced while customizing a new partner procedure determination
Hi,
I am facing an error
Deadlock exists in partner determination
circle reference for partner function
any idea what this error could mean...?
The error is faced when I am using an access sequence that I have created.....and it disappears when I am using any other access sequence. I have also tried to copy existing access sequence into a new one and I am faced with the same error.
any suggestion?Hello,
the best way to see whats wrong, is in Customizing of your Partner
Determination Procedure xxxxxxx with Button
"Check Partner Det.Proc."
Here you may see following error (that's only an example):
Business Activities
Deadlock exists in partner det. proc. Business Activities, determination
is not possible !
Circle reference for partner function Activity Partner (access sequence
0002 and access 0020.
That means you have a circle reference for your partner function
Activity partner 00000009, because the system tries to determinate a
activity partner (with access sequ. 0002) through activity partner !
Although you enter a activiy partner ! So every further determination
(of your responsible dealer) will not be executed.
I hope you can correct your pdp!
Regards, Gerhard -
Error faced during installation of EHP3 on ECC 6.0 (Test Import Error) ?
Hi
i am facing an error while installing EHP3 on ECC 6.0
my current level :
SAP_ABA 700 0017
SAP_BASIS 700 0017
SAP_BW 700 0019
SAP_AP 700 0013
all other SAP_APPL , ERECRUIT are on 600 level more then 11
I downloaded the ENH3 FOR ERP6.0 content from market place
I loaded them with SAINT and continued , i removed all other warnings of support package in SAINT by taking appropriate support packages .
Problem: I am getting Test Import errors
1)For EAAPL(60301) ---> error code 08
Function API_RE_CD_GET_CASHFLOW_CN (RECD_API_CONDITION 01) does not fit into the existing function group ((RECD_BAPI_CONDITION 21
2)FOR FI-CA(60301) --->error code 08
Function FKK_DB_LOCK_SINGLE (FKKLOCK_DB 04) does not fit into the existing function group ((FKLOCK 11
3)For ISM (60301) -
> error code 08
Function ISM_SD_RETURN_RELEASE (JKSDRETURN03 01) does not fit into the existing function group ((JKSDRETURN100 01Hi
Yes i have checked the previous SPS levels of these components its 13 and i used 603 SP level 02 of these components for installation as per told by you while defining a installation queue as well as support package selection in SAINT but still am getting the error. In SAINT i even got in remarks filed a message that "extended queue is consistent and matchesthe selected target packages". I am getting "TEST IMPORT ERROR ...."
I am getting return code 08 for components listed below in TEST IMPORT phase :-
1) EA-APL (603 SP level 01)
2) FI-CA (603 SP level 01)
3) ISM (603 SP level 01)
4) EA-DFPS (603 SP level 01 & 02)
Please help me out and suggest something. -
i faced some problems with my Oracle B2B
there are thousands of error messages
this is most of the error occur
-- error when receive document --
Machine Info: (esupplier)
Description: B2B adapter general error
StackTrace:
Error -: AIP-50031: B2B adapter general error: java.lang.NullPointerException
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1645)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2007)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1939)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1897)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NullPointerException
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1623)
... 6 more
-- error when sending document --
Machine Info: (esupplier)
Description: General Error
StackTrace:
Error -: AIP-50014: General Error
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:944)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:119)
at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:329)
at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:204)
please help me to tackle the problem.
thanks
kinwahmy production server hit this problem again.
2007.12.28 at 11:05:05:125: Thread-39: B2B - (ERROR) Error -: AIP-50014: General Error: Error -: AIP-50819: Failed to insert data into database table "B2B_EVENT": java.sql.SQLException: ORA-00001: unique constraint (B2B.SYS_C0013270) violated
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:944)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:119)
at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:329)
at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:204)
Caused by: Error -: AIP-50819: Failed to insert data into database table "B2B_EVENT": java.sql.SQLException: ORA-00001: unique constraint (B2B.SYS_C0013270) violated
at oracle.tip.adapter.b2b.data.DBTable.insertRow(DBTable.java:364)
at oracle.tip.adapter.b2b.data.EventTable.insert(EventTable.java:59)
at oracle.tip.adapter.b2b.msgproc.DbAccess.insertEvtTblRow(DbAccess.java:1291)
at oracle.tip.adapter.b2b.msgproc.Request.preTransmit(Request.java:1494)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1307)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:714)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:897)
... 3 more
Caused by: java.sql.SQLException: ORA-00001: unique constraint (B2B.SYS_C0013270) violated
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:625)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:181)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:629)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1153)
at oracle.jdbc.driver.OraclePreparedStatement.sendBatch(OraclePreparedStatement.java:3207)
at oracle.jdbc.driver.OraclePreparedStatement.alwaysOnClose(OraclePreparedStatement.java:9320)
at oracle.jdbc.driver.OraclePreparedStatement.enterImplicitCache(OraclePreparedStatement.java:2660)
at oracle.jdbc.driver.LRUStatementCache.addToImplicitCache(LRUStatementCache.java:291)
at oracle.jdbc.driver.PhysicalConnection.cacheImplicitStatement(PhysicalConnection.java:4058)
at oracle.jdbc.driver.OracleStatement.closeOrCache(OracleStatement.java:1372)
at oracle.jdbc.driver.OracleStatement.close(OracleStatement.java:1338)
at oracle.tip.adapter.b2b.data.DBTable.insertRow(DBTable.java:325)
... 9 more -
Error facing in Date format in Chinese languaga in Webi Document
Hi,
In Infoview, when i am launching the webi document from a China location(China user) after giving the date as input in the promt window i am facing a Date error "aaaa-n-j h:mm:ss" in Chinese language.
so i think my date format is not in sync with Chinese date format.so if it the case what configuration changes to be done in infoview to resolve such issues?
Note: however this webi docuement is used by multiple users from multiple countries.
So what settings needs to be done in Infoview inorder to mitigate these date format issues. (i.e when opening a webi document in a different country in their local language)
Please help me in resolving this issue.
Thanks & Regards,
Kishore.Just for a workaround, If date format DD/MM/YYYY is not giving error, enter date in this date format despite profile format, or change user profile to that.
And check for user-exit with hard-code format validation. -
Error facing while generating a FMS
Hi Experts
This is the query i am trying to generate
SELECT T0.[U_F1] FROM [dbo].[@Table1] T0 WHERE T0.[U_Code] = $ [@Table2.U_Code]
But it shows the following error:
1). [Microsoft][SQL Native Client][SQL Server]Incorrect syntax near '@Table2.U_Code. 2). [Microsoft][SQL Native Client][SQL Server]Statement 'Document' (RDOC) (s) could not be prepared.
Kindly tell me what mistake i have been made....
Regards
ShibinHi Shibin,
The structure of your query looks ok. You can try appending the .0 to the end as Rahul suggests as that formatting option should work for most single value fields.
You are referencing a field from the Table2 screen so you'll only be able to run that query as a formatted search (either auto refreshing or manually by pressing Shift + F2) from within that table screen. If you try to run the query from Query Manager it will give you an error because it can't pickup the value from the screen.
Regards,
Adrian
This will work as long as it is applied as a formatted search to a field on the Table2 UDT:
SELECT T0.\[U_F1\] FROM \[dbo\].\[@TABLE1\] T0 WHERE T0.\[U_Code\] = $\[@TABLE2.U_Code\]
Edited by: Adrian Johnson on Feb 15, 2011 11:48 AM -
Error faced while deploying Dynpro application in SAP EP 7.0
Dear All,
I am getting the foll. error while deploying dynpro application from NWDS to SAP EP 7.0
May 28, 2009 3:58:01 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[002]Deployment aborted
Settings
SDM host : EPTEST
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/nitesh/LOCALS1/Temp/temp25615pr_Bufferinfo.ear
Result
=> deployment aborted : file:/C:/DOCUME1/nitesh/LOCALS1/Temp/temp25615pr_Bufferinfo.ear
Aborted: development component 'pr_Bufferinfo'/'local'/'LOKAL'/'0.2009.05.28.15.57.53'/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application local/pr_Bufferinfo.. Reason: Clusterwide exception: Failed to deploy application local/pr_Bufferinfo. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/pr_Bufferinfo. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted
Please help.
NiteshNitesh,
Please ensure you follow the note 701654 .
Also refer to [SDM Deployment Fails|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/28/302c4142aef623e10000000a155106/content.htm]
Good Luck!
Sandeep Tudumu -
Error faced while creating Oracle Job
Hi,
I have the following script to create a job.
It executed successfully on my database. When we tried to execute the same at our clients place we got some error,
===========================================
SQL> DECLARE
2 job NUMBER;
3 m_sleeptimegap NUMBER;
4 job_interval VARCHAR2(100);
5
6
7 BEGIN
8 SELECT to_number(tdvalue)
9 INTO m_sleeptimegap
10 FROM tabledetails
11 WHERE tdidcode = 'LICENSE_PULSE'
12 AND tdkey = 'STATUS_DELAY';
13
14 job_interval := 'SYSDATE +'|| m_sleeptimegap / 86400;
15
16 DBMS_JOB.SUBMIT(job, 'License_Pulse_Check;', SYSDATE, job_interval, 'FALSE');
17 UPDATE tabledetails
18 SET tdvalue = LTRIM( RTRIM( TO_CHAR(job) ) )
19 WHERE tdidcode = 'LICENSE_PULSE'
20 AND tdkey = 'ORACLE-JOB-ID';
21 COMMIT;
22 END;
23 /
DECLARE
ERROR at line 1:
ORA-23319: parameter value "SYSDATE
+,000347222222222222222222222222222222222222" is not appropriate
ORA-06512: at "SYS.DBMS_JOB", line 60
ORA-06512: at "SYS.DBMS_JOB", line 138
ORA-06512: at line 16
===========================================
'm_sleeptimegap' is = 30 , which we have configured in a table called "tabledetails".
This is present at the client's place.
What could be the reason of this script failure ?
Could it be grants issue or something else ?
Thanks.Hi,
But that parameter in the dbms_job.submit procedure is of VARCHAR2 type,
dbms_job.submit(
JOB OUT BINARY_INTEGER,
WHAT IN VARCHAR2,
NEXT_DATE IN DATE DEFAULT SYSDATE,
INTERVAL IN VARCHAR2 DEFAULT 'NULL',
NO_PARSE IN BOOLEAN DEFAULT FALSE,
INSTANCE IN BINARY_INTEGER DEFAULT 0,
FORCE IN BOOLEAN DEFAULT FALSE);
[http://www.psoug.org/reference/dbms_job.html?PHPSESSID=5a94d055d8b65bd4b4661d1d24dedbf8]
Thanks. -
Error facing after installing a template from BI Content.
Hi,
I installed a web template '0TPL1_SR_GL_DASHBOARD' from BI Content. In Grouping tab I selected 'only necessary objects' and clicked on Web Template becoz I already have queries activated in BI.
But While checking that in WAD I could see the template name but Web Items are not dispalying.and an error message
'Template Include Item TOP_INCLUDE unresolved or empty. Close and reopen template.' is dispalying.
Need your help in this regard. Please let me know if I missed anything while activating.
Thank you.Hi,
A default template is designed to be executable with any query or query view.
Consequently, the data provider definition in these templates contains an empty data provider tag, which is then filled via the URL that provides a query or query view id.
So, it is natural that a data provider of these templates can neither be found nor instantiated.The behaviour is perfectly fine as it is.
Please apply the latest SPS and test the issue again.
https://websmp104.sap-ag.de/patches
Support Packages and Patches
SAP NetWeaver
SAP NETWEAVER
SAP NETWEAVER 7.0 (2004S)
Entry by Component
BI Java
BI BASE SERVICES 7.00
#OS independent
<< (check for latest) >>
and
BI WEB APPLICATIONS 7.00
#OS independent
<< (check for latest) >>
Hope this helps,
Colum -
how can i resolve it?
Maybe you could tell us what you already have tried and when this error shows up.
Besides that message, do you get any other information about the crash in your screen?
I guess you're on Windows, don't believe that Apple computers show this type of error message.
Running as administrator, or other compatibility settings could solve your problem. -
When i am trying to read the data through a .fasta file, my programing will be comparing to see if it is true of fast. If it is true, then there will be a boolean value and the data that is true. These two data will be entered into the database. I am using pointbase. There are many configurations to be set. I have configured the jwsdp2/conf/server.xml, changing the database name, as well as the web.xml file in my current program folder inside web-inf. But while compiling, building everything went well, but when it runs, the data cannot be added into the database.
the error as follows:
[echo]
[java] Localhost: actgt --- true
[java] java.lang.Exception: Couldn't open connection to database: Need to s
pecify class name in environment or system property, or as an applet parameter,
or in an application resource file: java.naming.factory.initial
[java] at primerStatic.geneDB.<init>(Unknown Source)
[java] at primerStatic.HelloClient.demoBean(Unknown Source)
[java] at primerStatic.HelloClient.run(Unknown Source)
[java] at java.lang.Thread.run(Thread.java:536)
as you can see the "actgt" is the data matching the .fasta file. And it returns the boolean. But now I would like to add the attribute to the database but it cannot open a connection to database? Why is that so? Any comments? Please help, thank you very much.well, I have something to add on. And that is regarding about the \conf\server.xml, what are the other things need to be added other then the database directory, or we leave the server.xml alone.
-
Error facing in MERGE :Updating 2 Tables
Hi ,
I am getting Error while trying the update 2 tables:
MERGE INTO table_b dst
USING (
SELECT
header_id,line_id,detail_id,group_id
FROM table_a
) src
ON (
dst.header_id = src.header_id
AND dst.line_id = src.line_id
AND dst.detail_id = src.detail_id
WHEN MATCHED THEN UPDATE SET det.GROUP_ID = src.group_id
N.B:GROUP_ID is preent in both tables (table_a,table_b)
Error while issuing the Command
Error at Command Line:14 Column:35
Error report:
SQL Error: ORA-00904: "DET"."GROUP_ID": invalid identifier
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:921311 wrote:
Hi ,
I am getting Error while trying the update 2 tables:
MERGE INTO table_b dst
USING (
SELECT
header_id,line_id,detail_id,group_id
FROM table_a
) src
ON (
dst.header_id = src.header_id
AND dst.line_id = src.line_id
AND dst.detail_id = src.detail_id
WHEN MATCHED THEN UPDATE SET det.GROUP_ID = src.group_id
N.B:GROUP_ID is preent in both tables (table_a,table_b)
Error while issuing the Command
Error at Command Line:14 Column:35
Error report:
SQL Error: ORA-00904: "DET"."GROUP_ID": invalid identifier
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:
I'm sure you're just as capable of looking at your code as I am, and it took me only 1 second to spot
you have aliased the table table_b as dst but referred to it as det. -
Error facing while exporting in Receivables in Oracle Apps
Hi,
I could not figure out that whil exporting in Oracle Apps in Receivables Module I am getting Error :
The following message recurs with the same 'A3 UIP Status' in error. I cant get past this message.
Value 1 for the flexfield segment A3 UIP Status does not exist in the value set A3_UIP_STATUS.
Any help will be helpful for me
Thanks and RegardsPlease post the details of the application release, database version and OS.
I could not figure out that whil exporting in Oracle Apps in Receivables Module I am getting Error :
The following message recurs with the same 'A3 UIP Status' in error. I cant get past this message.
Value 1 for the flexfield segment A3 UIP Status does not exist in the value set A3_UIP_STATUS.Please mention the navigation path to reproduce the issue (i.e. responsibility name, navigation, path, ..etc).
Thanks,
Hussein
Maybe you are looking for
-
How to re-add purchased songs from my account to another itunes?
hey, I had my laptop stolen and I'm currently borrowing one until I get a new one. I've changed my password etc. for my itunes account so it can no longer be accessed on my stolen laptop. But I'm wondering if it's possible to re-add my purchased song
-
My Phone has data that I deleted how do i get the space back?
I deleted all of the photos on my phone permanently yesterday, but after looking at how much usage i have left on my phone's space I still see that it has the deleted photos taking up false space. I checked to see if any photos where on my phone but
-
With Holding Tax provided in IDOC FIDCC2 is not getting updated in Acc Doc
Hi All, I am Posting a Accounting document in R/3 though Idoc FIDCCP02. This idoc has With holding Tax info segment as E1FIXWT. i gave all the info in this segment, like Tax code, Tax type , Withholding tax base amount (local currency) , Withholdin
-
Set IDOC number as Correlation ID in JMS Receiver Adapter
Hi , I am working in PI7.1 on IDOC to JMS interface, I want set IDOC number as Correlation ID in JMS queue , I did following Correlation steps , 1. Set JMSCorrelation ID to PI Conversation ID 2. Checked JMS CorrelationID of request 3.Value to PI Co
-
Documents related to SAP Netviewer
Hi All, On which site i get the information about SAP Netviewer or documents related to that. Thanks & Regards, Sagar Kale