Error generating while adding PO through DI
Hi All,
I got an error while creating Purchase Order through DI API by taking an Excisable Item and non-excisable Whs and non CENVAT TAX
The error is ' There are Excisable Item(s) with non-CENVAT tax code'
But if we are creating PO as same through UI API
it is successfully adding.
Then how can I add PO through DI API using this senerio.
Please reply anyone ASAP.
Anshu
Hi Anshu,
If you could add it through UI, try UI API instead of DI API.
Thanks,
Gordon
Similar Messages
-
I had to change my hard drive in my MBP 15". I use Time Machine on a Time Capsule for backup. I am booting up my laptop with a bootable USB key. I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one). I select the option to restore from Time Machine Backup. I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message. "An error occurred while adding a recovery system to the destination disk" It then prompts me to restart....
I need your help...what can it be.
ThanksI've encountered this issue when the Time Machine was encrypted with FileVault.
Article: HT4718
Additional Information
Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
Perhaps if you're stubborn, what would work is the following from the same article:
What to do if the installer warns that no Recovery System can be created
Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
All of this information was collected by browsing through the public articles on the Apple Support website. -
Dear Experts
I am getting the following error message while adding item in Item Master data. I have modified the following SBO_SP_transactionNotification in SQL server after that could not able to add the item
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20), -- SBO Object Type
@transaction_type nchar(1), -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int -- Result (0 for no error)
declare @error_message nvarchar (200) -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
-- IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
IF EXISTS(
SELECT T0.Price FROM IGN1 T0
where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
-- Select the return values
select @error, @error_message
endHi Rathna,
Just put the SP like this, without the -- before the IF. A -- marks the line as a command therefore you need to uncomment and it will work.
IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
IF EXISTS(
SELECT T0.Price FROM IGN1 T0
where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
Hope it helps -
An error occurred while adding the Cluster to the list
Hello,
I've installed the HFM 9.3.1 client on a Windows Server 2003 machine and now I'm attempting to configure it. I get all the way to the Server/Cluster Registration and when I try to add my one and only HFM application server to the list I'm present with this error.
"An error occurred while adding the Cluster to the list".
I don't see anything of use in the config tool log and as a result, I'm stuck. The odd thing is that not more than 10 minutes previously I added just finished installing the HFM client on another Windows Server 2003 machine and it installed / configured perfectly.
What am I missing?
Thanks!You may have a DNS error of sorts. From a command line on the server which presents the error, ping the servername you are trying to reach. Do not use the cluster name, but instead use the server name or IP address. If you successfully reach it, use this in the registration utility. Once the server has been reached, it will return the cluster's name. If you cannot reach it using ping, focus on the underlying DNS problem.
--Chris -
Error occured while Adding a reference Web Service(BizTalkServer2009_Tutorial2)
Hi,
I was going through the Biztalk tutorials. While doing the second tutorial of web service I got stuck while adding reference to the Web Service.
Steps I did:
Add service reference(by right clicking my project) --> Advanced --> Add Web Reference --> URL : http://localhost/b2bsupplierprocesspo/process.asmx
But somehow this URL is not accesible over there. I got following error:
Please suggest/guide me on this.
Thanks, Girish R. Patil.The error clearly states the reason for failure, being "CS0016: Could not write to output file ..... ..... - Access is denied."
The directory in question is the "C:\Windows\Microsoft.Ner\Framework\v2.0.50727\Temporary ASP.NET Files". So two things
Does the tutorial mention that the Web Service should be hosted under a .Net V2.0 Application Pool? If so then please give "Full Control" permissions to the above directory for the BizTalk Service Accounts (which also should be part of your "BizTalk Isolated
Host Users" Group.
If not then the service has to be hosted in a .Net v4.0 app pool. Change the Application Pool Settings through IIS Manager and give permissions to a similar folder (Temporary ASP.Net) but under the Framework\V4.0.... directory.
Regards. -
Seeking to fix this error: "Failed while adding virtual Ethernet switch connections."
I am getting the error below when trying ot make modifications to my Hyper-V.
I am trying to add a new Virtual Adaptor.
Hoping someone may have a suggestion on how to fix this.
Error:
New-VMSwitch : Failed while adding virtual Ethernet switch connections.
Failed to connect Ethernet switch port (switch name = 'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX', port name =
'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX', adapter GUID = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'): The system cannot
find the file specified. (0x80070002).
The operation failed because the file was not found.
At line:1 char:1
+ New-VMSwitch -Name "LAN1" -NetAdapterName "Ethernet" -AllowManagementOS $True
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VMSwitch], Virtualizati
onOperationFailedException
+ FullyQualifiedErrorId : ObjectNotFound,Microsoft.HyperV.PowerShell.Commands.NewVMSwitchCommandAlex just a quick response to your advice re disabling AV, this did not work for me, after more searching the internet for a solution I found a post from 2013 where one poster offered the advice to go one step further, and it was to remove the AV package
completely, the package in question was KIS2013. I have KIS2015 and figured I would try it as I was getting a little frustrated with the constant failure to create a virtual switch.
Anyway, it worked for me, I removed KIS, rebooted, and the VS was created on the first attempt without any issue. So simply pausing/disabling the AV from within the AV program may not be enough, I suspect that some may work and others not, as in the case
of KIS. I wonder also if you disable the AV services at start-up if this would also work but I did not try it.
Anyway to other people experiencing this issue, I suggest disabling AV first as per Alex's advice, and if this does not work for you then suggest trying to remove the AV before doing anything more drastic like re-installation of OS as I have seen suggested
in more than one place.
Thanks
Mr Bee
--EDIT--
Just wanted to add, it is also worth 'excluding' any Hyper-V folders from the AV engine, I did not try this before removing KIS2015 so it may work without the need to remove your AV product, but on re-install I have now exluded the folders as suggest by
a few folks in various posts... -
Error getting while adding BI patch (SQL error 1089 accessing)
Dear Experts ,
here i faced one problem while adding BI patch to newely installed system
the error is at phase import_proper below are shown error log
/usr/sap/trans/log/SAPI-704IFINBICONT.LBD
ERROR LOG
Start import R3TRFUGR/POSDW/CONVERSION_XML ...
1 entry for TADIR updated (R3TRFUGR/POSDW/CONVERSION_XML ).
2 entries from TFTIT deleted (pname /POSDW/SAPLCONVERSION_XML)
7 entries from FUPARAREF deleted (pname /POSDW/SAPLCONVERSION_XML)
2 entries from ENLFDIR deleted (pname /POSDW/SAPLCONVERSION_XML)
2 entries from TFDIR deleted (pname /POSDW/SAPLCONVERSION_XML)
dev trc ,00000 Fri Oct 1 10:28:27 2010 -649694573 88072.488603
dev trc ,00000 OCI-call failed with -1=OCI_ERROR 44 88072.488647
dev trc ,00000 SQL error 1089: 'ORA-01089: immediate shutdown in progress - no operations are permitted'
50 88072.488697
http://dbsloci. ,00000 *** ERROR => Error 1089 in stmt_fetch() from oci_execute_stmt(), orpc=0
59 88072.488756
http://dbsloci. ,00000 *** ERROR => ORA-1089 occurred when executing SQL stmt (parse error offset=0)
50 88072.488806
dev trc ,00000 sc_p=0x110f364a8,no=27,idc_p=0x110f4ece0,con=0,act=1,slen=68,smax=256,#vars=1,stmt=0x111799cc0,table=D010INC
57 88072.488863
dev trc ,00000 SELECT MASTER FROM D010INC WHERE INCLUDE = :A0 ORDER BY MASTER;
47 88072.488910
dev trc ,00000 sc_p=0x110f364a8,no=27,idc_p=0x110f4ece0,con=0,act=1,slen=68,smax=256,#vars=1,stmt=0x111799cc0,table=D010INC
113 88072.489023
dev trc ,00000 prep=0,lit=0,nsql=0,lobret=0,#exec=972,dbcnt=0,upsh_p=(nil),ocistmth_p=0x11179a658
50 88072.489073
dev trc ,00000 IN : cols=1,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=80,vmax=32,bound=1,iobuf_p=0x111083a40,v
69 88072.489142
dev trc ,00000 lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
46 88072.489188
dev trc ,00000 OUT: cols=1,rmax=792,xcnt=792,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=80,vmax=32,bound=1,iobuf_p=0x111225e
54 88072.489242
dev trc ,00000 lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
46 88072.489288
dev trc ,00000 SELECT MASTER FROM D010INC WHERE INCLUDE = :A0 ORDER BY MASTER;
46 88072.489334
dbrepo ,06599 ***LOG BY4=>sql error 1089 performing FET on table D010INC dbrepo#4 @ 6599
72 88072.489406
dbrepo ,06599 ***LOG BY0=>ORA-01089: immediate shutdown in progress - no operations are permitted dbrepo#4 @ 6599
50 88072.489456
sap_dext called with msgnr 1:
db call info
function: db_report_interface
fcode: READ_MASTERS
tabname: SOURCE
len (char): 40
key: /POSDW/LCONVERSION_XML$01
retcode: 1
SQL error 1089 accessing : ORA-01089: immediate shutdown in progress - no ope
Main import
End date and time : 20101001102827
Ended with return code: ===> 12 <===
please clarefy me how can i solve this my issue
RegardsDear Smathi,
Based on the error, Error 1089 in stmt_fetch, can you please check this error message with your database
administrator? Please have a look at note #551.
Regards,
Shimon Zafrir -
Error -9672 While Adding Printer
I have connected an HP Deskjet Printer to my Airport Express. When I go into my Printer Utility to Add this printer, I am able to see it and select it. The location is correct and everything seems fine until I click on the Add button. This is when I get the following message:
An Error occurred while trying to add the selected printer.
Error -9672
I have tried everything and can't seem to get this to work. Any ideas anyone?That is a common error, did you download & install the latest hp drivers, generally the ones that come on the CD are out of date!?
Might try these two after reinstalling the latest driver and repairing Permissions with a reboot afterwards...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html
Kappy has further advice here...
http://discussions.apple.com/thread.jspa?messageID=8266833� -
Error -9672 while adding networked printer
While trying to add a networked HP 3600n color laserjet to the printer list (via Bonjour) on a 10.5.6 G4 Macbook I always ended up with 'an error occurred while trying to add the selected printer' with a -9672 error code. After much deleting of printers, resetting the print system etc. I found that the problem was with the actual printer (another OS X machine turned up the same error). I did a cold reset on the 3600 (hold the tickmark button while the machine starts into its initialization phase after power on, then select COLD RESET from the menus) and re-entered its network settings and the problem on the OS X machines went away.
Posted here in case anyone else hits this. This same error message and error code appears in other circumstances and these are dealt with in other posts.That is a common error, did you download & install the latest hp drivers, generally the ones that come on the CD are out of date!?
Might try these two after reinstalling the latest driver and repairing Permissions with a reboot afterwards...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html
Kappy has further advice here...
http://discussions.apple.com/thread.jspa?messageID=8266833� -
Error message while adding KFF to Standard page through Personalization
Hi,
I am trying to add Personal Information KFF to one standard page through personalization, followed below steps.
1) create item through personalization
2) Item Style = Flex
3) Appl Short Name = PER
4) Name = PEA
5) Type = key
But I am getting below error message after come back to page
The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: KeyFlexfieldDefinitionFactory.getStructureNumber could not find the structure definition for the flexfield specified by Application = PER, Code = PEA and Structure number =
Please suggest Steps to Add KFF to Standard Page through Personalization.
Thanks in Advance,
Hanimi.Hi
Did you add the value for View Instance?
Regards
Sahir -
Error generated while transporting a request using TMS
Dear Techies,
While transporting a request iam getting an error message
"Transport control program tp ended with error code 0247"
Errors: add to buffer has problems with data- and/or cofile
Iam not getting any information to resolve the problem. Further In devlopment system iam unable to see the old requests and also new one whcih i have created and released. I tried adding the request manually in TMS, whcih resulted in the above mentioned error.Please suggest some solutionare you able see the objects when you are expanding the request/task
Also please check the followings & let us know the result
1. Goto transaction STMS. Menu verview -> Systems. Select system and Menu Check --> All available option
2. Goto transaction STMS. Menu verview -> Transport Routes, Menu Configuration --> Check --> All option
One more thing are you facing this problem with only for one specific request or for all requests
Edited by: Mrinal Das on Jan 5, 2011 3:10 PM -
Internal Error -5000 while Adding a PODeliveryNote Document using DI
Hello friends:
I am getting an Internal -5000 error while trying to upload a PODeliveryNote (Goods Receipt) into Business One using SDK. The description of error just says Internal Error - so I really cannot understand what's going on. Any help will be appreciated.
Here is the part of the code that is running into this error:
Private Sub LoadObjectsFromXML()
Dim sXmlFileName As String
Dim iElementCount As Long
Dim iCounter As Long
'// setting the file name
sXmlFileName = "C:\SAP2HJXMLData\Upload\NewPODelivery.xml"
'// Get the number of Business object in the file ...
iElementCount = oCompany.GetXMLelementCount(sXmlFileName)
MsgBox(iElementCount & " Elemnts found in xml file" & vbNewLine & "Ready To Start Transaction")
'// start a transaction
oCompany.StartTransaction()
'// Run a loop through the objects and when with in the file
'// and the objects to the DB
For iCounter = 0 To iElementCount - 1
'// get the objects type at the specified position
oCompany.XmlExportType = SAPbobsCOM.BoXmlExportTypes.xet_ExportImportMode
'// get the business object data from the file
oDocument = oCompany.GetBusinessObjectFromXML(sXmlFileName, iCounter)
'// add the object to the data base
oDocument.Add()
'// Check for errors during connect
oCompany.GetLastError(lErrCode, sErrMsg)
If lErrCode <> 0 Then
MsgBox("Error: " & lErrCode & " - " & sErrMsg & vbNewLine & "Transaction will be rolled back")
oCompany.EndTransaction(SAPbobsCOM.BoWfTransOpt.wf_RollBack)
Exit Sub
End If
Next iCounter
'// Commit Transaction
oCompany.EndTransaction(SAPbobsCOM.BoWfTransOpt.wf_Commit)
MsgBox("Data inserted successfully")
End Sub
Following is the XML that we are trying to post. There is a corresponding PO open.
<?xml version="1.0" encoding="utf-16" ?>
- <BOM>
- <BO>
- <AdmInfo>
<Object>20</Object>
<Version>2</Version>
</AdmInfo>
- <Documents>
- <row>
<DocNum />
<DocType>dDocument_Items</DocType>
<HandWritten>tNO</HandWritten>
<Printed>tNO</Printed>
<DocDate>20071224</DocDate>
<DocDueDate>20071224</DocDueDate>
<CardCode>V30000</CardCode>
<CardName />
<Address />
<DocCurrency />
<DocRate />
<DocTotal />
<Reference1 />
<Comments>This was received in SAP</Comments>
<JournalMemo />
<PaymentGroupCode />
<DocTime />
<SalesPersonCode />
<Confirmed>tYES</Confirmed>
<ImportFileNum />
<SummeryType>dNoSummary</SummeryType>
<ContactPersonCode />
<ShowSCN>tNO</ShowSCN>
<Series />
<TaxDate>20071224</TaxDate>
<PartialSupply>tYES</PartialSupply>
<DocObjectCode />
<DiscountPercent />
<RevisionPo>tNO</RevisionPo>
<BlockDunning>tNO</BlockDunning>
<Pick>tNO</Pick>
<PaymentMethod />
<PaymentBlock>tNO</PaymentBlock>
<MaximumCashDiscount>tNO</MaximumCashDiscount>
<WareHouseUpdateType>dwh_Stock</WareHouseUpdateType>
<Rounding>tNO</Rounding>
<DeferredTax>tNO</DeferredTax>
<NumberOfInstallments />
<ApplyTaxOnFirstInstallment>tNO</ApplyTaxOnFirstInstallment>
<DocumentsOwner>3</DocumentsOwner>
<DocumentSubType>bod_None</DocumentSubType>
<Address2 />
<PayToCode />
<UseShpdGoodsAct>tNO</UseShpdGoodsAct>
<IsPayToBank>tNO</IsPayToBank>
<DownPayment />
<LanguageCode>3</LanguageCode>
<PickRemark />
<SequenceModel>0</SequenceModel>
<UseCorrectionVATGroup>tNO</UseCorrectionVATGroup>
<VatPercent />
</row>
</Documents>
- <Document_Lines>
- <row>
<LineNum>0</LineNum>
<ItemCode>A00004</ItemCode>
<ItemDescription />
<Quantity>3.000000</Quantity>
<ShipDate>20071224</ShipDate>
<Price />
<PriceAfterVAT />
<Currency />
<Rate />
<DiscountPercent />
<VendorNum />
<WarehouseCode>01</WarehouseCode>
<SalesPersonCode />
<CommisionPercent />
<TreeType>iNotATree</TreeType>
<AccountCode />
<UseBaseUnits>tNO</UseBaseUnits>
<SupplierCatNum />
<CostingCode />
<ProjectCode />
<BarCode />
<VatGroup />
<Height1 />
<Height2 />
<Lengh1 />
<Lengh2 />
<Weight1 />
<Weight2 />
<Factor1 />
<Factor2 />
<Factor3 />
<Factor4 />
<BaseType />
<BaseEntry>6</BaseEntry>
<BaseLine>0</BaseLine>
<Volume />
<VolumeUnit />
<Width1 />
<Width2 />
<Address />
<TaxCode>0</TaxCode>
<TaxType>tt_Yes</TaxType>
<TaxLiable>tYES</TaxLiable>
<ShippingMethod />
<CorrectionInvoiceItem>ciis_ShouldBe</CorrectionInvoiceItem>
<CorrInvAmountToStock />
<CorrInvAmountToDiffAcct />
<WTLiable>tNO</WTLiable>
<DeferredTax>tNO</DeferredTax>
<NetTaxAmount />
<NetTaxAmountFC />
<LineTotal />
<TaxPercentagePerRow />
<ConsumerSalesForecast>tNO</ConsumerSalesForecast>
<ExciseAmount />
<SWW />
<DistributeExpense>tYES</DistributeExpense>
<ShipToCode />
<RowTotalFC />
<TaxOnly>tNO</TaxOnly>
<UnitPrice />
<LineStatus>bost_Open</LineStatus>
<LineType>dlt_Regular</LineType>
<ChangeAssemlyBoMWarehouse />
</row>
</Document_Lines>
</BO>
</BOM>
Thank you.
Kushal Dutta.OK - I figured this one out. Bottom line, I was leaving several fields unpopulated, expecting SAP to populate the data. That was not working. I had to populate more fields to make it working.
Thanks.
Kushal. -
Error FICORE405 while adding field in Sort Key of GL
Hi,
Please note that I am trying to bring field Recipient (WEMPF) from PO to FI document line item in the assignment field. SO for that respective GL i tried changing the sort key by adding this field to that sort key but Error FICORE405 is generated.
It does not allow me to add this fielld to this sort key.
Please look into it.
Regards
PranayHi Pranay,
Check notes 215798, 676338 and 984305, it could be helpful.
Thanks
Aravind -
Error Message while adding material in BOM
Dear All,
A raw material (A) is in the BOM as on date. A new material (B) which is a new development is to be used henceforth. I have inventory of A which can be consumed for the next 4 to 5 months.The material B is added as an alternate to A in the BOM,with 100 percent probability to B and zero percent to A. This is done to facilitate 2 motives.
1.To have auto generated PR for material B from the system, when the MRP run is done during the month.
2.To issue the material A to production based on Production order, which is based on BOM.
Also I Block the material A for further procurement by setting a special status to the material in the material master.This is done to ensure that no further PR & P.O is generated for material A.
After a month's time I am creating a BOM, for a new variant, where this material A or B is to be used. As per my earlier logic, I try to put both the materials as alternative to each other,with the 2 motives as mentioned above.
I am stopped by the system for including material A in the BOM,by an error message since it is blocked for procurement.
A warning message is welcome but not this error message.
Can anyone tell me how this can be done.And whether the procedure adopted in this scenario is a optimised one? Any other way to handle such a business situation?
Regards,
AdityaHi Aditya,
I think you can use production version .
You can create a production version with alternate bom1 with mateiral B.
Another version with alternate bom2 wtih material A.
Second option you can use discontinuation process with follow up material
check this link for further help.
http://help.sap.com/saphelp_47x200/helpdata/en/ea/e9b3f84c7211d189520000e829fbbd/frameset.htm
If helpful reward points
Regards
Ranga -
Dn2entry BAD 1 856 : error 32 While modifying attributes through messaging
HI,
I am unable to modify 'personnel Information' information, which is in 'Options' of messaging server web interface. It actually modifying some attributes in directory servers. I able to see the following errors in Directory server.
1. Error log:
dn2entry BAD 1 856
dn2entry BAD 1 856
2. Access log:
[22/Aug/2002:13:42:05 -0400] conn=24 op=1 MOD dn="uid=test2, ou=people, o=internet"
[22/Aug/2002:13:42:05 -0400] conn=24 op=1 RESULT err=32 tag=103 nentries=0 etime=0
Anyone can help how to resove this? If i try the same after searching this 'test2' user entry in Direcoty server using ldapsearch, it's working fine without any errors.Hi, Pawan,
Thanks for your response.
The entrys are very much exists in Directory server. I able to see those through ldapsearch. These users are authenticating also fine. Only problem while modifying attributes.
How can resolve the spaces in DNs? How can I find out which DNs having simillar problem?
Kindly reply.
-Vasu
Maybe you are looking for
-
How to insert new line char while writing bytes into file
Hello Sir, Is it possible to insert the new line character in set of String variables and stored them into bytearray ,then finally write into File? This is the sample code which i tried: File f = new File(messagesDir,"msg" + msgnum + ".t
-
N80 Gallery - Is it possible to sort?
Can anyone tell me if it is possible, and, if so, how to sort images in the N80 gallery. I have about 300 photos I have downloaded onto the handset, but they are not in the order I would like them. Is there any way to sort them, or an application out
-
IMovie 11 and Jpeg Linear PCM. (Codecs).
Hello everyone. I recently shot on a camcorder for use in iMovie 11. The default format was .mts. It imported to iPhoto, automatically when it recognized the device. I moved it out to convert it to a format readable by iMovie 11, like .mov or .mp4. a
-
Macbook zoom/rotating problem, help please!
I have a macboook and every time I try to zoom in or out using my mousepad, my picture is rotated. How can I fix this?
-
"Invalid op for forward-only resultset : last"
I am trying to use the oracle jdbc drivers in classes12.zip to connect to an Oracle 8.0.6 database. The documentation for classes12.zip says that these drivers allow scrollable ResultSets, but whenever I try to use ResultSet.absolute(), ResultSet.rel