Error handling in bpm

Hi Experts ,
Can any one please explain the eror handling in BPM.
Thanks in advance
Naveen

Hi Naveen,
Check the below links
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Also see the below BPM related links
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Cheers...
Vasu
** REward POints if found useful **

Similar Messages

Getting Dynamic Error Text for Error Handling in BPM

Hello,
is there any way to get the error message or further details on an exception handler in BPM? I would like to pass the detailed error description of the error that has happened in BPM to an alert using a separate Alert container variable.
Is this possible or do I need to hardcode potential errors?

Hi Florian,
Check Michal's reply in : catch the exception
and Bhavesh's reply in Notify user about Exception in BPM
Regards,
ravi

Error Handling in BPM - Send Step

Hello,
I would like to implement the following two error handlers using BPM:
1. There is a send step which sends a message to an HTTP receiver. If the HTTP server is down I would like to add 3 retries and just in case after the third retry fails there should be an error Email sent. So I am wondering whether a communication error (which happens in the HTTP receiver communication channel) is delivered back to the process engine so that it can be handled using BPM.
2. I also need to apply a validation using XML schema. So if validation fails the error should also be returned to the process engine so that it can be handled in the integration process.
Are those two requirement possible as described (returning communication and validation errors)? Or do I have to follow another approach?
Thank you very much!

Hi Florian,
>>2. When I activate transport acknowledgement and there is an error in XML validation outbound channel request I get an system error acknowledgement back however the error branch is NOT taken either!
Correct send step using transport acknowledgment will check whether the message was transmitted or not
Check this link http://help.sap.com/saphelp_nw04s/helpdata/EN/43/65ce41ae343e2be10000000a1553f6/content.htm
>>3. And NOW it gets interesting: When I simulate step 2 again an cancel the error message afterwards then the error branch is taken! Not very useful in my opinion if error messages have to be canceled first. The error branch seems to be pretty useless for me in case of asynchronous send steps.
Again when you cancelled the message it was not received successfully by the receiver system and hence it raised exception (as mentioned in the Exception of send step.)
I will suggest you to try using Application Acknowledgment in send step. Also If you provide the steps of BPM then it will be more helpful.
Also have a look at this :
Asynchronous send step can raise exception only when
1. Thrown when a permanent system error occurs:
a. In the case of an asynchronous send step, the exception will only be triggered if an error occurs during the transfer to the pipeline. Errors that occur during mapping in the pipeline, do not trigger an exception.
b . In the case of a synchronous send step, the exception is also triggered by permanent system errors that occur in the pipeline or while transporting the message to or from the pipeline.
Regards
Suraj
Edited by: S.R.Suraj on Sep 8, 2009 6:41 AM

Alerts and Error handling in BPM Async/Sync Bridge

Hello All,
I am developing an Async/Sync Bridge in BPM for sending a request from ECC webservice asychronously to a front end application synchronously using BPM Async/Sync Bridge. I get a response from the front end to PI and stays there.
It wont be send back to ECC. What are the possibilities of error handling required in this type of scenario.
Thanks
Deno

. I get a response from the front end to PI and stays there.
Then it should mean that the BPM design is faulty...did you have a send step at the end which closes the Async-Sync Bridge by sending the message to original sender?
In SXMB_MONI --> For BPM message processing there will be a link called PE...click it...check the graphic workflow...see till where the message has processed.
error handling
include your Sync send step whithin a Block....this block will have an Exception Branch....in this exception branch you can have your Exception handling logic...like raise alert, cancel process etc.
Regards,
Abhishek.

Error handling using BPM

hi all
I would like to do an error handling scenario using BPM in XI. As i haven't done it before, can somebody give me links to good blogs and materials in this regards.
Thanks
Sumayya

HI,
Check the below links
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Also see the below BPM related links
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Regards
Chilla

Error Handling Inside BPM Process

Hi All,
I have a scenario in which, when a BPM Process errors out due to any of the System Exception I'm catching it using a Event SubProcess activity and handling it.
Problem:
I want the control to get back to the next activity i.e Normal Process should resume once the control is out of the Event SubProcess.
I found that using a Normal Subprocess with boundary event helps to resume the flow back to normal control. But Its difficult to have individual Subprocesses for N number of activities.
Is there any other method to overcome this?
Please provide a solution.
Two Cents,
Karthick.

I'll bow out of this thread after this post, but a couple thoughts.
You might have seen these, but here are some links that should help you. If you have not already looked at Fault Policies, pay particular attention to this in the posts below:
Fault Handling in Oracle SOA Suite
http://beatechnologies.wordpress.com/2011/07/18/fault-handling-in-oracle-soa-suite-advanced-concepts/
Fault Handling and Prevention - Part 1
http://www.oracle.com/technetwork/articles/soa/luttikhuizen-fault-handling-1-1877036.html
Fault Policy
http://error0.wordpress.com/2011/08/02/howto-use-the-fault-management-framework-with-oracle-bpm/
I don't mean for this to sound harsh and please keep in mind that I don't know the problem you're trying to solve or what you're process looks like.
>
Yes we do, but we have many activities inside a single process since the business is big.
>
Sounds like you're pretty far down the road now, but just a word of caution. I've found myself on projects with large processes. It's not just exception handling that you'll find more difficult, but many things became more cumbersome to maintain in a large process.
>
A thought of using Boundary Events with subprocess looks good but its not possible to use a single sub process for all boundary events in order to resume to normal activity.
>
I did not follow this. If you invoke a subprocess using a Call activity, you'd be able to add a boundary event on the Call activities for the activities in the called sub process. You'd also have a process that is easier to read and maintain.
Dan

Application error handling in BPM?

Hi,
Does any one has done application errorhandling in BPM?
Can you please let me know how to use fault messages in RFC calls which are sync, I tried doing once but got error message in Message Interface saying "Message Interface references a RFC and a Non-RFC messages" as my fault messages were non-RFC.
regards,
Mustafa

Hi Mustafa,
This kind of problem you may solve using CCMS(CEN-CENTRAL MONITORING SYSTEM),
1)For each remote system,
define 2 RFC destinations
in Transaction SM59:
for collecting data
for executing analysis
methods.
2)To register a remote system,
execute Transaction RZ21,
select Technical Infrastructure
Configure Central System
Create Entry for Remote System.
3)Activate CCMS Monitoring by
setting respective configuration
parameter in Transaction
SXMB_ADM
4)To activate qRFC monitoring in TC RZ21, follow menu path
Technical Infrastructure
Local Method Execution
Activate
Background Dispatching
5)To upload the GRMG configuration file, execute TC: GRMG
AFTER CONFIGURATION OF CCMS,
GO FOR MONITORING
1)Enter CCMS Monitoring by running either TC RZ20 or TC
S_B6A_52000011 in folder Exchange Infrastructure: Monitoring of personal user menu
2)In order to display the description of a monitoring tree element (MTE), choose node, and press key "F1
3)Change view by choosing button Open Alerts TC: RZ20
4)Double-Click on Message Age Alert to display all
erroneous messages of respective interfaces
This is may help you...,
Thanks,
RK
Message was edited by: Sridhar U

Error handling in File - XI - SOAP scenario without BPM

Hello!
We have a File -> XI -> SOAP scenario without BPM. The problem is that if the Web Service sends back an error XI tries to reprocess the same message again and again instead of taking the next one.
We do not want set the retry interval to NULL because most error cases are temporary connection problems and then also those messages would not automatically be reprocessed any more.
We also have to use BE instead of EO, otherwise the Web Service will not return a response. But we need the response to be sure that the processing was successful. The message volume in this scenario is quite high and we do not want to use BPM only for the error handling.
I know that from SP19 some additional adapter modules are available for async - sync scenarios without BPM. I tried to configure it like described in File - RFC - File without a BPM - Possible from SP 19. but it did not solve the problem. Does anybody have any other ideas? Thanks.
Regards, Tanja

Hi Tanja,
>>>The volume is 3000 messages/day on business days and 700 messages/day during weekends but the traffic will increase in the future
I think, you should check that out. It is assumedly only 2 days work to build a scenario:
IDoc -> BP
BP <-> SOAP/HTTP
BP -> IDoc (Acknowledgement)
In the process you need a condition branch, where you decide success or not. You need 2 Interface Mappings for filling the ALEAUD.
Just send 1000 IDocs to the Test-XI and look to performance monitoring at Runtime Workbench, to find out, how many message will be processed in one hour. Assumedly 3000 and more per day should be possible. The advantage would be to reduce number of systems (no file system) and messages (better monitoring) and using the standard (better maintenance).
>>>So you are suggesting I should use HTTP adapter and then add the SOAP header manually in a mapping?
Yes, build the SOAP envelop during the mapping. Most easy is to use XSL or, if your mapping is ready, an additionsal XSL. You can put the error into the Acknowledgement to see it in ERP transaction WE02.
Filling of ALEAUD fields:
E1ADHDR/MESTYP: original message type
E1ADHDR/E1STATE/DOCNUM: original IDoc number
E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
I ve done such a scenario several times. That works without any problems.
Regards,
Udo

BPM for error handling and acknowledgements

Hi,
Can any one tell me how to handle BPM for error handling and acknowledgements in one scenario.
Please send me the link if you have other wise give me the solution on the same.
Thanks,
Nagesh

Hi !
Just check out these links This might help you.
Usually Application Level Acknowledgement is considered during Sync communication. If you are using RFC, you can make use of Sync communication. So you can handle it without bpm, provided your both sender and receiver are sync interfaces.
To know about Ack-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
you can not dirrectly access the content of the ACK, however the BPM shows different behaviours based on the ACK status. E.g. if the ACK contains a success message the BPM will continue in its normal process, if the ACK contains a permanent error, it will either stop or go through an exception branch (provided such a branch has been defined). Have a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm It doesnt"t state the above mentioned behaviour in detail but says that you need to define an exception branch.
The trickiest part is always to find out, when you will get a transient vs. as permanent error ack. If you are using ACKs with Proxies refer also to this link http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm and this http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
The following link has entire configuration of Receiver XI Adapter (including acknowledgements)
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
 eror handling in BPM.

1. CCMS monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
2. BPM Monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
3. Monitoring XML Messages http://help.sap.com/saphelp_nw04/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/frameset.htm
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Also see the below BPM related links
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Thanks !!!
Regards
Abhishek Agrahari
Questions are welcome here!!
Also mark helpful answers by rewarding points

Error Handling in JDBC Adaptor - Without BPM

Hi friends,
My problem is like this. Scenario is File -> Xi -> JDBC.
here i didn't used BPM at all.
My interface is working fine.
right now i am not doing any error handling for 'Primary key violation, refrential intigrity etc.. '.
if this type errors encountered i going to adapter monitoring and looking out the issue.
Now the client requirment is
whenever this type of errors occured Client should be notified Via email along with error description.
Is there anyway to do this ?

Hi Suresh,
You can setup the Alerting framework of XI to trigger alerts. Alert rules can be set to raise alerts in case of JDBC Adapter Errors.
Check these links....
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Thanks & Regards,
Renjith
An addition to what i just said...You have to be on SP14 for this...
Message was edited by: Renjith Andrews

BPM error handling

Hi,
I've read many messages on this forum regarding BPM error handling but am still a little confused.
In my scenario the BPM is quite simple. All it does is Call web service (synchrous) then transform and then call another web service synchronous.
Now , If any call to the two web services fails , I would like to be able to restart the two calls... now if they fail again, I would like to be able to restart the two calls again... until they work. But each time the restart would be done manualy in the BPM monitoring transactions.
The way I understand the error handling
if I put my synchronous send steps and transformations in a step and catch the exception they throw , I can send myself an alert and then throw another exception which I dont handle. This way , since that exception is not handled , it will set the process in error and I can restart the process later.
However , how can I set it up so that when I restart the bpm , both calls are done again and the same exception handling happens.
Now , when I restart, it seems only what comes after the block and the exception is executed. If I put the sync send calls in the exception handling branch, that will allow me to run the send steps once after an exception...
Thanks.

Even if I don't throw the exception and its a System error on the synchonous call, the BPM is in error but the next call will
go through...
I don't know what the point of EOIO was in that case ?
Even having an Exception branch is enough....you need not compulsorily have anything in it.....so when an exception occurs in your Sync step the control goes to the Exception Branch of the Block....but since there is no step defined in the branch nothing happens.....and the Control then passes to the next branch as in a normal flow.....
Since the Exception branch is defined the BPM will not wait/ stop/ error-out if any thing goes wrong in the Sync Send step.....it will continue....this is the normal behavior....an error entry will however be shown...if you want that your process stops if the Sync Send fails then have a Control Step (Action--> Cancel Process) in the Exception Branch
Regards,
Abhishek.

IDOC to SOAP asynchronous scenario Error handling

Need an expert!!!!!!!!! advise on error handling for IDOC--PI--
SOAP scenario.This is a asynchronous scenario where PI is calling a Legacy system using SOAP adapter.My question is how i can do error handling in this scenario.If i get an alert in pi with payload variable that would be fine, do i need to use BPM and if that is tthe case what will be steps.
Appreciate your help.
Manish

Hello Manish,
My question is how i can do error handling in this scenario.
Use the standard alert framework. Search on SDN / SAP Help for details.
do i need to use BPM and if that is tthe case what will be steps.
BPM is not required to raise alerts, as this is an async call.
Regards,
Neetesh

Error Handling

hi,
I have an IDOC -> XI ->SOAP scenario.
How do we handle error handling in the below scenarios i described:
1. If i have an error in transmitting the xml to the receiver SOAP. How can i send an error email notification?
2. A retry or resend has to occur for 8 hours i.e., we keep trying for 8 hours and if it fails then we need to notify through email. How can we do this?
3. At the first failure transmission an email has to be notified and failure after 8 hours another email notification has to be sent so 2 emails will be sent for a failure transmission? Is this possible through XI?
How can we achieve the above?
Thanks,
Tirumal

Hi Tirumal,
Configure 2 alerts.
One to be triggered when there is the error in tramsmitting the SOAP XML.
Next to be triggered after the retry for 8 hours. If you are using the BPM with wait, then you can associate the Alert with the Exception block of your BPM and trigger the same.
Also, from SP14, Alerts can be triggered for errros in both integratioon engine and adapter engine.
To create alerts , this blog can help you out,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
From SP14 onwards, activation of end to end monitoring is not needed for Alerting. Refer to this note 870232 for this info.
If you are on Sp14, implement the note 913858.
If you are below SP14, then also check this blog,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
Regards,
Bhavesh

Error Handling in File to Multiple IDOC Scenario?

Hello Experts,
My scenario is file with Multiple records and I want to send it to SAP system.If there will be 10 Records in my file I need to create 10 IDOC in Target system.
I can use below of the two options.
1) File to Multiple Idoc (1.N Mapping)
2) Using BPM
3)Directly place the file in SAP application server and process it via ABAP Program.
However I am not clear in which option error handling will be more effective.Please suggest.
Basically I want to handle If out of 10 records 9 are correct and 1 record is not correct then I should be able to report within PI without affecting 9 correct records.Is it possible 9 records will be sent to SAP system and PI will only show error for 1 incorrect record.
Also I will be doing this scenrio for transaction data with huge size (1 Million Records).Which approach will be more effective in this case.
Thanks,
Pushkar

Hi Patel,
I want to handle If out of 10 records 9 are correct and 1 record is not correct then I should be able to report within PI without affecting 9 correct records.Is it possible 9 records will be sent to SAP system and PI will only show error for 1 incorrect record.
when working on graphical mapping, the target structure is created when there are no errors in all records of source structure.
suppose if we have validation error in 9th and 10th record, then we can not process the first eight records and inturn we can not store the two error records in XI for further.
i suggest you the third option, you can directly place the file in SAP application server and process it via ABAP Program.
this is far better because you can do more customizations as you have to deal with millions of records.
Regards,
Pradeep A.

Exception thrown by RFC To be handled in BPM

Hi All ,
I am trying the scenario.
Http Client -> XI-->BPM -
> RFC
<- <-- <-------
The whole communication is Synchronous.
So I have
One Outbound Synchronous Interface
One Inbound Synchronous Interface.
Two Abstract Synchronous Interface for BPM.
And 4 Abstract Asynchronous Interfaces for the containers which is to used in BPM.
(Two for request and two for response )
For simple Request Response Messages from the RFC my Scenario is working perfectly.
But I Introduced an Exception in RFC, So my Rfc is Throwing an Exception Message which needs to be returned back to Http Client.
Now my problem is only Synchronous interfaces have the option of fault messages in which the exception message can be included. So how do I pass the Exception message to Http Client via BPM , Because Containers require Asynchronous Interfaces and they are not accepting fault messages.
Has Anyone tried this kind of exception handling in BPM,
Please Help Me.
Yomesh.

Hi Saravana,
first of all thanks for ur reply,
In my scenario there are two reciever systems(SAP and JDE) and call to both the systems is synchronous. I am merging the responses from both systems into one using BPM. Thats why I needed BPM.
Now About exception handling that is required because if response from one system is not there then also the BPM process should not terminate .It should give the output from other system and an error message for first one to the HTTP client.
I think now the scenario is clear for you,
Please see if you can help me with that.
Thanks,
Yomesh

Error handling in bpm

Similar Messages

Maybe you are looking for