Error handling on infopackage.

Hi experts,
I want to configure a ODS load to load the correct data and report the errors. I have set set the error handling to update valid records, reporting possible (request green) and create a error dtp.
Now i have one doubt, How do i have to set the set the error handling on the error dtp? And on the infopachage?
Thanks!!
Artur

Hi Artur......
U can do error handling using both DTP and infopackage.......but DTP is only for BI 7.0......
DTP :
In the Update Tab of the DTP............u will Find the Error Handling Field..........there u will get three options..:
a)No update, no reporting (default) >> If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. The incorrect record is highlighted so that the error can be assigned to the data record.
The incorrect records are not written to the error stack since the request is terminated and has to be updated again in its entirety.
b)Update valid records, no reporting (request red) >> This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that are not updated and manually releases the request (by a QM action, that is, setting the overall status on the Status tab page in the monitor).
The incorrect records are written to a separate error stack in which the records are edited and can be updated manually using an error DTP.
c)Update valid records, reporting possible >> Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
The incorrect records are written to a separate error stack in which the records are edited and can be updated manually using an error DTP.
For ur requirement.............u hav to choose either option b or c.........
Now once loading is done........Click on the PSA icon............edit the value..........
Then in the Update Tab ..........U will Find the Create Error DTP option.............click on it..........create the Error DTP and load the edited records.........
Infopackage :
Check this........
http://help.sap.com/saphelp_bw30b/helpdata/en/05/bb223905b61b0ae10000000a11402f/frameset.htm
Regards,
Debjani........

Similar Messages

Error handling in InfoPackages

Hello all,
I am trying to implement error handling when loading from an ODS to a cube. I wanted to use the "Updating valid records, reporting possible" option whereby the valid records can be reported on immediately. The help for this option suggests that a second request is generated for the records in error, however, in my experience this does not seem to work. For example, I have 100 records of which 1 record should fail in update due to missing master data on 0MAT_SALES. I expected this record to be split out in to a separate request however what actually happens is the entire load fails and the record in error is flagged in error in the PSA. Has anybody had any success with this option? I know this option is not available when loading to an ODS object but I thought to a cube should be ok.
Cheers,
Kevin.

Kevin,
are you using PSA ?
Try that and let me know...
see also in
http://help.sap.com/saphelp_bw30b/helpdata/en/05/bb223905b61b0ae10000000a11402f/content.htm
(sorry for your previous post, but I haven't enough time to surf through the system in order to find a solution to your request...mine is not approximation, but only attempts to help you !)
Bye,
Roberto

Error handling in Transfer rules

Hi All,
I have a small code for material mappnig (EAN to SAP) in my transfer rules. If mapping does not exist then I am writting Error message(Type E) in error table G_T_ERRORLOG and setting up value of Returncode to 1.
Also I have done the Error Handling in Infopackage to 1000 Records and selected the radio button "Valid records update, reporting possible(request green)".
Now say I am uploading 5000 records. In that 500 are without mapping.
So, in ideal case system should update request with 4500 records in data target(with status Green) and also create another request with those 500 records(with status Red). In my case it is creating the new request but with zero records and also the request with 4500 records are showing status red, though 4500 records are getting updated in ODS.
But when I do the same validation in Update rules it all works fine. The only difference in coding is, in transfer rules error table is G_T_ERRORLOG and in update rules it is MONITOR.
Any help....
Thanks & Regards,
Samay Mehta

Hi samay,
In the transfer rules, if returncode is not 0, the upload stop,so..
Actually I delete the "wrong" data in the start routine of the transfer rules

Use of "Error Handling" Tab in InfoPackage Update Tab?

Hello All
I want to know the Use of "Error Handling" Tab in InfoPackage Update Tab?
Options in this tab are like
1.No Update,no reporting
2.Valid records update,no reporting(request red)
3.Valid records update,reporting possible(request green)
Terminate After No.Errors _________
4.No Aggregation Allowed
Will anyone tell about this in detail?
Many Thanks
balaji

Hi,
No update, no reporting (default):
If errors do occur, the update of the entire data packet is canceled. The request is not released for reporting. However, the records check continues.
Updating valid records, no reporting (request red) :
This option enables you to update valid data that is released for reporting only after the administrator has checked the incorrect, not updated records, and has manually released the request (by a QM action, meaning setting the Overall status on the tabstrip Status in the monitor).
Updating valid records, reporting possible :
The valid records can be reported on immediately. Automatic follow-up actions are also carried out, such as adjusting the aggregates.
With option a) the incorrect records are marked in red in the PSA maintenance. You can display the relevant error messages amodally, edit the records, and update the request manually. If it was not possible to write into the PSA (hierarchy or transfer method IDoc), an application log is written instead.
With options b) and c) a new request that is only read into the PSA is formed from the incorrect records. Here you can edit the records of the new request in the PSA and start the update manually.
For more information please refer the URL below.
http://help.sap.com/saphelp_bw30b/helpdata/en/05/bb223905b61b0ae10000000a11402f/frameset.htm
Regards,
K.Manikandan.

Error while creating INFOPACKAGE to load transaction data

Hi,
I am getting the following error while creating infopackage:
"Error in Conversion exit CONVERSION_EXIT_CUNIT_INPUT"
I am getting this error when I click on the Start button under the schedule tab in the screen Administrator Workbench: Modelling.
I clicked on Monitor icon to view the diagnosis. The diagnosis is mentioned below:
the screen is Performance Assistant Window and the diagnosis message appears in italics.
Message No RSAR137
DIAGNOSIS
An error occurred in record 1 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field UNIT.
Procedure
Check that the record where error occurred has the correct format and correct it accordingly. 
Please note that I have succesfully created update rules as I didn't get any error.
Also I would like some one to explain me clearly the differences between transfer rules and update rules with a clear explanation please.
Please help me.
Thank you.
Tristan.

Hello Tristan,
I was used to get the same kind of problems before.
I got the problem with the data source type-Flat File (.csv)
One solution that I have done:
1) checked the particular record in which the error message refer to
2) tested the particular unit from the transaction se37
 Function Module = CONVERSION_EXIT_CUNIT_INPUT
 Press F8 in order to execute
 This would be help a bit
3) corrected data from the flat file
 another alternative solution was by:
 handling the data using routine in the transfer rules
For my case, before executing the InfoPackage, data from flat file could be previewed. At this point, I could check which records caused the problems.
I'm not sure about your case whether data came from which type of data source.
That's all I could share for now.
-WJ-

Error handling in process chain-doubts

Hi ,
I have some doubts in error handling of process chains.
1) I have aprocess load infopackeage and subsequent process is update fromPSA.
process load infopackage got failed , so i loaded the IP manually and repeated the next i.e process update from PSA .
How to correct the process chain from now?
2) I have aprocess load infopackeage and subsequent process is Delete request in infocube .process load infopackage got failed , so i loaded the IP manually and repeated the next process i.e Delete request in infocube. Chain continued by deleting the right request . How this is possible ?
Plz help me as this is urgent and daily i have to deal with this issues. If any documents on error handling is greatly appreciated.
My mail id is [email protected]
Regards,
Pavan

Hi Pavan,
Hope the following links will give u a clear idea about process chains and clear ur doubts.
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Errors in monitoring of process chains can be categorized into 4 different sections...
Master data - Full Update
Master data - Delta Update
Transaction data - Full Update
Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
U can even look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
****Assign Points if Helpful****
Regards,
Ravikanth.

Error Handling for loads using XI

Hi,
We are using XI to load data into BW. If we use flat file or R/3 in the infopackage we can go to the update tab-data update type in the data targets-error handling-valid records update reporting possible option. If we chose this then error records get into a seperate PSA and valid records get into the target. But this option is not available if data comes in RSA7 through XI and then loaded. Only the option no update no reporting is available.So all the records get into the same PSA. Can anyone tell me how to handle this?

this is because your code is probably inside one giant try catch block, what you need to do is have small ones in places where you do the parsing.
post code and i can show you how to modify it

Error Handling for DSO

Hi all,
Is it not possible to give error handling options for DSO in Delta loads?
I have created a delta infopackage to load data from Order Line Item (2LIS_11_VAITM) into a DSO.
But the error handling gives only option 'No Update ,No reporting'.
I want to give the option 'Valid Records update, reporting possible (request green)' option.
Please let me know whether any setting needs to be done to make this option available.
Thanks in advance.
Meera

Check this help - self explanatory - trying checking F1 thats very informative and self explantory most of the times
Switched off
If an error occurs, the error is reported as a package error in the DTP monitor. The error is not assigned to the data record. The cross-reference tables for determining the data record numbers are not built; this results in faster processing.
The incorrect records are not written to the error stack since the request is terminated and has to be updated again in its entirety.
No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. The incorrect record is highlighted so that the error can be assigned to the data record.
The incorrect records are not written to the error stack since the request is terminated and has to be updated again in its entirety.
Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that are not updated and manually releases the request (by a QM action, that is, setting the overall status on the Status tab page in the monitor).
The incorrect records are written to a separate error stack in which the records are edited and can be updated manually using an error DTP.
Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
The incorrect records are written to a separate error stack in which the records are edited and can be updated manually using an error DTP.

Error handling in BI7.0

Looking for a functionality which we have in 3.x infopackage level.In infopackage of 3.x we have the concept of error handling by going to update tab and we will give the error handling wherein we have the option of giving few records and selecting 'valid reccords update ,reporting possible(request green)'.
How do we do this in BI 7.0 in a DTP ..
Thanks in advance.

Hi Kumar,
You can find the details in SAP Help:
On the Update tab page in the data transfer process (DTP), the error handling settings allow you to control how the system responds if errors occur in the data records when data is transferred from a DTP source to a DTP target.
These settings were previously made in the InfoPackage. When using data transfer processes, InfoPackages only write to the PSA. Therefore, error handling settings are no longer made in the InfoPackage but in the data transfer process.
Settings for Error Handling
For a data transfer process (DTP), you can specify how you want the system to respond when data records contain errors. If you activate error handling, the records with errors are written to a request-based database table (PSA table). This is the error stack. You can use a special data transfer process, the error DTP, to update the records to the target.
Temporary storage is available after each processing step of the DTP request. This allows you to determine the processing step in which the error occurred.
"Repairing" with Error DTP
You create an error DTP for an active data transfer process on the Update tab page. You run it directly in the background or include it in a process chain so that you can schedule it regularly in the context of your process chain. The error DTP uses the full update mode to extract data from the error stack (in this case, the source of the DTP) and transfer it to the target that you have already defined in the data transfer process.
For more, please have a look at this Link: [BI 7Handling of Data Records with Errors|http://help.sap.com/saphelp_nw04s/helpdata/en/42/fbd598481e1a61e10000000a422035/frameset.htm]
Cheers,
Habeeb

Data error handling documents

Dear Freinds,
can any one send error handling documents for data loads.
Regards,
Pavan

Pavan,
load failed .
fullload-- masterdata or transcational data-- data in PSA--- directly update from PSA by deleting request in data target.
Yea you can update the data from the PSA if the data is correct.
full load -- master data or transcation data-- no PSA- schedule the infopackage again.
Yes when you have no data backup in BW (PSA) you need to extract data from the source system. In case of delta if the load fails you can repeat the delta load which extracts data from source system.
delta load- master data or transactional data data in PSA-- directly update from PSA by deleting request in data target.
delta laod-- master data or transactional data- no psa- schedule the IP again.
If the delta load fails you can repeat delta even if the data is present in the PSA or not
also when we go for repair full request and repeat delta?
You can go for repair full request only when you have data in PSA.

How to take control back from service error handler in osb

I am using osb to send data to multiple services at the same time.since x query is a procedural language if any single operation fails the flow goes to service error handler which calls a BPEL webservice and logs the error in a database but the control doesnt comes back to my code I have tried everything including RESUME,REPLY operations but all in vain similarly i cannot use service callout call to my business service because its not allowing to select my BPEL wsdl operation

If your statement "the control doesnt comes back to my code" means you expect that your xquery will continue in processing than your expectations are just too high. :-)
Resume action is supposed to resume the next action in the message flow. It means the action that follows the action which caused an error.

Report and Alert don't executed in the error handler with a JMS proxy service

Hi,
I'm working with OSB 11.1.1.4.0 and I'm facing a problem with the error handler of my JMS proxy service.
My error handler contains two main elements :
- a Report action
- an Alert with a JMS destination defined
When the business service failed the message remain in the queue. It's the expected behavior.
The problem is :
- the report is missing
- the alert is raised but missing in the JMS destination defined in the Alert setting.
I've noticed if I add a Reply with Failure or Success, Report and Alert are successfully executed.
Unfortunately the message don't remain in the JMS queue.
What can I do in order to have my report/alert done and the JMS transaction rollback in order to keep the message in the queue ?
I've already met this problem in the past with alsb v3 and my solution was to add Service Callout in the error handler in order to externalize these actions.
This solution is not convenient and I hope another solution is possible.

Inventorying workgroups can be difficult, especially when it comes to remote access and network security. Because workgroups are not centrally managed, some of the items discussed in this
wiki article on preparing your workgroup environment may require you to visit each machine individually.
For non-domain credentials, you do not use the <systemname>\<user> format, you simply enter the user name. Regarding how to enter the credentials, if you have an account that uses the same username and password on all machines and is an administrator
on all of those machines, then you can enter that in the All computers credentials page of the wizard. You can also do this if they are different user names. However, if some machines have an account with the same user name, such as Administrator,
but different passwords on each machine, you will need to use the Manually enter computer names discovery method, and then enter the information for each group or each machine.
As you can tell, workgroup environments can quickly negate any benefit that the agentless inventory nature of MAP provides.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

LV7.1 Strange behavior with Automatic Error Handling occuring when it shouldn't [LV 7.1 Pro on WinXP for Tablet PC's]

[LV 7.1 Pro on WinXP for Tablet PC's]
I recently let a rather large LV app of mine run in the development environment while I was out for a couple of days. Upon returning I found that the app had hung for ~22 hours waiting for an answer to an Automatic Error Handling (AEH) dialog proclaiming an Error 7 in New File without any indication of the VI hierarchy that called New File. I set about ensuring that AEH dialogs would not pop up and have not been able to discover how I could have possibly received one in the first place.
Subsequent investigation revealed:
Neither AEH option in Options>Block Diagrams were checked.
Network problems had occurred around the time that the app had hung. All file paths are network paths when running in the development environment, so the cause of the error was most likely valid, even if the AEH dialog appearance wasn't.
My app has only one instance where the New File primitive is used by me. That subVI and all others above it in the hierarchy DO NOT have the AEH property enabled. The error out cluster of New File in my subvi is wired.
My app has three instances where New File is called from a vi.lib vi (Open/Create/Replace File.vi, Open Config Data.vi, and Prompt Web Browser Path.vi), none of which have the AEH property enabled. Nor does any of their calling VI's. All three instances also have their error out cluster wired.
A utility to examine the AEH property of all VI's (with all top level and dynamic VI's loaded) in memory reported that only 1 of 308 vi's ( RGT Does File Exists.vi from the Report Generation Toolkit) had that property true. That vi has no subVI's other than the File/Directory Info primitive and no calling VI's in common with any of the vi's that call New File, except a top level VI.
As long as 'Enable automatic error handling dialogs' remains unselected in options>block diagram, I am unable to get an AEH dialog for either the New File or File/Directory Info primitives in a test VI with AEH property enabled and their error out clusters unwired no matter what invalid path I pass to the functions. As soon as the options>block diagram>Enable AEH dialogs' is selected, both primitives fire AEH dialogs with no error out wired and don't when wired. i.e. works as advertised.
In other words I can find no reason why I should have gotten the problem AEH dialog...
I cannot afford for this app to hang because of a network problem, other portions of the app that were running concurrently correctly handled the error and, had the AEH dialog not appeared, the app would have made corrections or shutdown in an orderly fashion.
Any ideas?

Very good.
Write Characters to File.vi>Open/Create/Replace File.vi>New File
New File throws the error. Open/Create/Replace strips the hierarchy from the source of the error. Write Characters passes it to the General Error Handler. I never looked above O/C/R file in the hierarchy except for enable automatic error handling property. The tip-off should have been to realize that O/C/R file was stripping the hierarchy from the error and look above that.
The real irony is that Write Characters was being used to log error cluster data to an error log file...
Save as... Copy without updating... the OEM 'Write Characters to File' is gone from this app.
Thanx (a bunch)

Error While sending infopackages from OLTP to BI/urgent

Hi BW friends
im workin on production support and im new to it.while
running infopackage X ,it is throwing a error
error:While sending infopackages from OLTP to BI/urgent
In status tab it shows traingular yellow colour
and diagnosis says that No idocs could be sent to bi using rfc.
so if u know please reply me
Thank you
Amarnath k

while loading data into the target we got this message and the solution is do manual update for that.

Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Why APEX 4.1 Error handling function does not trap the error of missing table?
Say, I create simple application with single IR report page and I also assign standard simple error handling function.
Function works perfectly, except but this case:
If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
and error handling function is not invoked at all.
Is this a feature or a bug?

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

Error handling on infopackage.

Similar Messages

Maybe you are looking for