Error While sending infopackages from OLTP to BI/urgent

Hi BW friends
im workin on production support and im new to it.while
running infopackage X ,it is throwing a error
error:While sending infopackages from OLTP to BI/urgent
In status tab it shows traingular yellow colour
and diagnosis says that No idocs could be sent to bi using rfc.
so if u know please reply me
Thank you
Amarnath k

while loading data into the target we got this message and the solution is do manual update for that.

Similar Messages

Error while sending data from XI to BI System

Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
Narendra

Hi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal

Error while sending mail from SAP

Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
    Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
    A RAISE statement in the program "SA
    condition "FOLDER_NOT_EXIST".
    Since the exception was not intercep
    program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
Hasan

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Authentication Error while Sending Email from SMTP server.

Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.

no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue.

Error while sending emails from SOA 11G BPEL

Hi All,
I have configured an error email in my catch/catch-all blocks. Incase I dont have any retry action in my faultpolicies.xml file, the error email is sent fine. However if any remote/binding fault occurs and retry is done on partnerlink, in those cases the Error Notification service fails with below error:
ORABPEL-31015
Error while sending notification.
Error while sending notification to email.
Possible causes : SDPMessaging Driver not configured; Invalid To Address is used; Email server/Messaging gateway is down; using IP address as part of email ID instead of domain name;.
Caused by: javax.naming.NameNotFoundException: While trying to look up comp/env/ejb/services/NotificationServiceBean in /app/ejb/ejb_ob_engine_wls.jar#BPELActivityManagerBean.; remaining name 'comp/env/ejb/services/NotificationServiceBean'
sendEmailNotification WSIF Exception occured. Please check stack trace "Cannot get Object part 'Responses'. No parts are set on the message"
If I throw a remote/binding fault (throw activity), the error email gets sent. However whenever the retry happens incase of a fault, the above error comes.
Any idea what can be reason behing this...
Regards
Subhankar

try to call a sub process from your catch all block and use the email activity in that subprocess. this should work

Error while sending email from MOSS portal

Hi,
I have configured email settings on my MOSS central admin, still MOSS throws error while trying to send emails to AD users. I tried to give permission for a user in a site and it threw this error:
The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator.   at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(PeopleEditor picker, String subject, String message)
   at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
   at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
   at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I have provided outbound smtp server address and the email addresses as well.
Regards,
Manoj

Ok, issue solved!! The issue was that I had to set anonymous connection directly to server. Error provided by SharePoint didn't help at all. After hours of hair-pulling and head-banging, I found a nice article that detailed how to troubleshoot e-mail issues:
http://www.tonytestasworld.com/post/2009/04/09/SharePoint-2007-Outgoing-E-mail-Troubleshooting-Tips.aspx
In the above article, the troubleshooting step 5 was the breaking point. As suggested in the blog:
http://www.sharepointblogs.com/johnwpowell/archive/2007/07/10/alerts-failing-cannot-connect-to-smtp-host.aspx
I created a C# console application and it gave me the correct error:
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated
So I used this code to create an SMTP test application:
using System;
using System.Collections.Generic;
using System.Text;
using System.Net.Mail;
public class Program
public static void Main(string[] args)
try
// Check arguments
if (args.Length != 3)
ShowUsage();
return;
// Create message
MailMessage mmMessage = new MailMessage();
mmMessage.To.Add(new MailAddress(args[2] as string));
mmMessage.From = new MailAddress(args[1] as string);
mmMessage.Subject = "TestMail";
mmMessage.Body = "This is a test";
// Send message
SmtpClient sc = new SmtpClient(args[0] as string);
sc.Send(mmMessage);
catch (Exception ex)
Console.WriteLine(ex);
finally
//Pause
Console.WriteLine();
Console.Write("Press a key >");
Console.ReadKey();
private static void ShowUsage()
Console.WriteLine("Usage");
Console.WriteLine("TestMail [SmtpServer] [FromAddress] [ToAddress]");
} // end Program
This command saved lots of trouble for me and solved the email issue:
http://forums.msexchange.org/m_1800412705/mpage_1/key_/tm.htm
set-ReceiveConnector "default sfzcombx" -permissiongroups:"ExchangeUsers,ExchangeServers,ExchangeLegacyServers,AnonymousUsers"
Hope this helps somebody!
Regards,
Manoj

Error while sending mail from SAP system

Hi all,
I configured SAP connect in ecc6.0 ehp7 while sending mail using tx sost i am error
Message cannot be transferred to node SMTP due to connection error (final) , below is the icm log.
ERROR => IcmPlAllocBuf: MpiGetOutbuf failed (rc = 14(MPI_ESTALE: outdated MPI handle)) [icxxplugin.c 1222]
ERROR => SMTP SmtpClientClose: alloc failed, rc = -3 [smtp_plg.c 3738]
ERROR => IcmBufFree(id=0/32): MpiFreeBuf failed (rc=14), MPI_ESTALE: outdated MPI handle [icxxplugin.c 165
ERROR => IcmConnClose: PlugInStopConn failed (rc=701) [icxxconn.c 3433]
can any one please help on this
Thanks,
Narendar.

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Error while sending mail from SAP to external mail id

Hello Experts,
I am blocked by the below problem.
I am trying to send email from SAP to an external email ID. I have tried using Class approach as well as the function 'SO_DOCUMENT_SEND_API1' for the same.
Everytime i get the following message:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 <email address> Sender address rejected.
I am not at all able to figure out why this type of error is coming.
The same code is working on the development environment but not on the test system.
Please reply back asap as i am completely blocked due to this.
Thanks/Regards,
Himanshu

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Error while sending email from ABAP

Hi
I am using function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send the email to an external id.
In the debugging mode i can see the function module is getting executed successfully i.e sy-surc value is 0.
But i am getting a sucess message i.e "No message sent".
Has anybody faced this kind of problem.Please let me know how to rectify this error
Thanks
Debraj

Hi Deb,
Have you done the relevant configuration in SCOT transaction to connect to a SMTP server and also as per note 455140???
Also this blog from Thomas Jung could help you...
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
Cheers
JK

Error while sending mails from SAP

Hello Experts,
I am facing the below problem:
If an error occurs during the processing of a Z SAP transaction, an email needs to be sent to the user who is executing the transaction.
So, in this case the sender and receiver is the same user.
But the problem that i am facing is that for sending the mail from SAP, i have to maintain the email address in the user profile as blank. If I maintain some email address in the user profile, i encounter the following error:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 <email address>: Sender address rejected .
Please help me resolve this.
Thanks a lot in advance to answer the above query.
Regards,
Himanshu

Hi Himanshu,
I think its the problem with mail server configured in ur system.
Please contact ur basis Person.Ask him to chk The SCOT tcode once.Maybe ur SMTP configuration is not done properly.Also chk this sap note 455140 - Configuration for e-mail, fax using SMTP
Regards,
Lakshman.

Error while sending message from BI to XI

Hello Gurus,
I am trying to push data from BI to XI, following procedure form guide "Push data from BI to XI - 1.00 May 2004).
I have created the table to be exported via Open Hub Destination, I have created an entry within SLG0, I have defined ABAP class (all according to steps in guide), and finally I have created process chain that:
1. starts the process
2. executes APD (data to be exported preparation)
3. activates data in exporting structure
4, sends the message to XI that data is ready to be fetched
I have a problem with last entry. It fails, and outputs following message:
Job ZPUSH has been started because of event RSPROCESS
4I8WSSPB6BEBSWCP5L9DVIA6L . This job is not, however, known in the
active version of the process chain.
The last element of my chain is defined as "other process type". This element is expected to send a message to XI.
In the procedure described in a quide I see no reference to an ABAP class (that I have defined in a certain step)
Please advice

Tere was wrong (default) abap class assigment in other types entry definition

Error while extracting data from ODS using Infospokes - URGENT

Hi all,
I am extracting data from an ODS using infospokes and nothing fancy, no selection criteria but I am getting an error message saying
Syntax error in row3(-> long text) Msg id = "RG" and msgno is 102
Any ideas on how I can see what is the exact error and how to debug this?
thanks
Sabrina.

Hi Sabrina
service.sap.com can help you getting the details of your mesg.
I found one OSS note suitable to your mesg. So just check out OSS note # 671097. I hope this note will be some help to you. If not go and chk in the OSS you can find some more.
Here is the note details also
<i>Symptom
Error message RG102: 'Syntax error in &1, row &2 (-> long text)' appears in the request log of an InfoSpoke.
Reason and Prerequisites
The data source is an ODS object and the extraction mode is 'delta'. The cause of the error message is that the ODS extractor is unable to select the request ID (InfoObject 0REQUID) from the change log of the ODS object. However, the request ID is mistakenly provided in the field list of the ODS object on the InfoSpoke maintenance screen. --
Solution
Delete the 0REQUID InfoObject from the field list of the InfoSpoke and activate the InfoSpoke. As of the patch mentioned below, the request ID in the template tab is no longer provided.
BW 3.0B
Import Support Package 16 for 3.0B (BW3.0B Patch 17 or SAPKW30B16) into your BW system. The Support Package will be available once note 571699 with the short text "SAPBWNews BW 3.0B Support Package 16", which describes this Support Package in more detail, has been released for customers.
BW 3.1 Content
Import Support Package 10 for 3.1 Content (BW3.10 Patch 11 or SAPKW31010) into your BW system. The Support Package will be available once note 571747 with the short text "SAPBWNews BW 3.1 Content Support Package 10" has been released for customers.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, however, the short text still contains the words "preliminary version".
Refer to note 110934, which contains information about BW Support Packages.</i>
Regards,
Rohini

Error while Fetching data from BUT0ID data its urgent

hi all,
SElECT SINGLE partner FROM but0id INTO l_bp
WHERE type EQ 'BUP008' AND
idnumber EQ edid4-sdata+45(10).
this is my select statement its not working i have to fetch partner number with the help of sdata.
when i give 69093 instead of edid4-sdata+45(10) then i am getting the output
when i specify edid4-sdata+45(10) then it is not working
please tell me any one its urgent
Thanks & regards
Vardhan

Hi,
Try doing this.Take the offset of sdata and move it into a varaiable and then check the condition in the query.
Regards,
Sharath

Error while sending bulk data

Hi,
I am doing one scenario in which SAP sends Material Number to Oracle and in turn Oracle fetches data for that Material Number and send it back to SAP.
Here when I am executing the scenatio in SAP with Material Number as 1* . I am getting an error in XI as "Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. java.sql.SQLException: No more data to read from socket"
I am getting this error while sending data from SAP to oracle.i tried the same scenario with 2 or 3 records.It is working fine.
I tried many options increasing the polling interval and restricting the records.But I am getting the same error.Please help me in this case.
Thanks,
Gunasree.

Most of the debugging links say: Connection with database server is lost, and Use a new connection to come out this problem with code so that if again the session goes expired the connection automatically get establised.
Have a look:
Troubleshooting: No more data.....
1.http://www.chemaxon.com/forum/ftopic904.html
2.http://elandingstest.alaska.gov/confluence/display/IERS/TroubleshootingDatabaseConnection+Problems
3. http://www.orafaq.com/forum/t/35084/0/
4. BAPI_PO_CHANGE
5. http://www.junlu.com/msg/314591.html
BR,
Alok

Deadlock issue while sending data from PI to JDBC !!!

Hi All,
We are getting below error while sending data from PI to JDBC (Database).
Error - JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'store_order_details' (structure 'Order_details_Statement'): com.microsoft.sqlserver.jdbc.SQLServerException: Transaction (Process ID 61) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
This is happening when more than one PI message is trying to deliver data at the same time to database.
Can anyone let us know the root cause of this issue and how we can rectify this.
Is there some setting which we can use to do parallel processing as Delivering one message at a time to database is causing performance issues & taking lot of time.
Thanks
Neha Verma

Hello Neha,
Strange but can please get below information.
Please check with the DB admin about if the user is getting locked or is there any hanging threads related to user.
Also confirm with DB admin if the exclusive lock is on table or on the row when you try insertign or updating information.
You can share the user from the receiver channel.
Regards,
Hiren A.

Error While sending infopackages from OLTP to BI/urgent

Similar Messages

Maybe you are looking for