Error in actual template allocation for Business Process

Gurus,
I am facing a strange problem in actual template allocation for business process (T-code: CPAS). When I am doing a test run, the system gives the result with a message "Processing completed with no errors", However when I have unchecked the test run and ran the allocation, system shows me the result, however no posting takes place. The message I am getting is:
"Data not updated due to errors". The details of this error message are:
No information was found
Message no. GU444
Diagnosis
The system could not find the necessary information.
I am absolutely clueless and have no idea where things have gone wrong. I have maintained the activity and cost center properly. The template I am using is also ok.
  Request your help on this. Any suggestion would be highly appreciated.
Thanks in advance!
Snigdho.

Hi ,
With such kind of error " "Data not updated due to errors". " its very difficult so determine the exact cause of the issue .
Did your selection parameters in CPAS has a tick on detailed list . Please tick the detailed list icon and run KPAS again and let me know if you are getting more detailed error from SAP.
Regards
Sarada

Similar Messages

  • CPTD Error during actual template allocation

    Hi,
    When i am trying to do CPTD (Actual template allocation) i am getting the belwo error message
    System status CRTD is active (ORD 1094052)
    Message no. BS013
    Diagnosis
    Object ORD 1094052 has system status CRTD (Created).  According to this status, transaction 'Actual activity allocation' is not allowed.
    Procedure
    You can only carry out the requested function if this is allowed according to the status of the object.
    But I am running for period 3/2010 and this order is created in period 4/2010. I am not getting how this order is selected when i am running for period 3.
    Please help me
    Thanks & regards

    @Sudhakara Reddy,
    Could you help me understand how a costing run (CK40N/CK11N) is related to an order status?? Costing run is for product cost planning which is product specific.
    CPTD transaction is for actual templace allocation and not for costing run. I failed to understand the link between your response and the question asked!
    Newsap,
    I think creation date of an order not relevant for this transaction. You may also want to check sapnote # 309588.

  • CPTD - Actual Template Allocation on Process Orders - V.Urgent

    Hi,
    We are doing period closing for June'07.
    We are using Activity Based Costing templates for Overhead allocation.
    While executing T-Code CPTD (Collective processing) for Actual Template Allocation for Allocating Overheads for the month of June, the system is allocating
    Overheads on all Process Orders confirmed till today i.e.it is wrongly
    allocating Overheads for June, on process orders on which there has been
    no production confirmed in June, but the Production was confirmed only
    in July.
    We expected the system to allocate Overheads only on Process Orders on
    which the Production was confirmed in June,07.
    Points will be awarded for providing solution.
    Regards,

    Hi
    I am using environment 9 yes.
    My formula is very simple:
    On Object I have:
    SenderCostCenter = '130570' AND
    SenderActivityType = 'LABORA'
    And then I have simply put "1" in Plan Quantity and Actual Quantity.
    So what it does is it allocates the unit cost of the combination of cost center 130570 and act. type LABORA one time to each material/order no matter lot size.
    Should I perhaps have put "1" into the Plan Fix and Actual Fix instead?
    Thanks

  • Actual Template Allocation - Process Order Handling

    Hi all
    Could somebody give me some input to an issue I am facing.
    I am working on a best practice baseline for Chemicals and have setup a Template to allocate overheads to materials. The allocation is fixed no matter the lot size of the process order.
    At month end when running the closing process I use the transaction CPTD to allocate the actual template overhead to each process order.
    However this transaction picks up and re-allocates overhead to process orders already confirmed, delivered and settled.
    This is of course not what I expected as these orders have been fully completed, so I am thinking that I am missing step in closing down the process orders correctly.
    Is there a status on the process order that will cause that order to be excluded from the CPTD, or am I missing some configuration?
    Thank you in advance
    /Thorben Hald
    2C change A/S
    Denmark

    Hi
    I am using environment 9 yes.
    My formula is very simple:
    On Object I have:
    SenderCostCenter = '130570' AND
    SenderActivityType = 'LABORA'
    And then I have simply put "1" in Plan Quantity and Actual Quantity.
    So what it does is it allocates the unit cost of the combination of cost center 130570 and act. type LABORA one time to each material/order no matter lot size.
    Should I perhaps have put "1" into the Plan Fix and Actual Fix instead?
    Thanks

  • AIP-18510:  Error adding objects to configuration ... for business process.

    Hello,
    We are encountering this error few days after applying latest MLR patch.
    None of our agreements can be deployed, even those that were not changed in any way after the patch was applied.
    This is part of our ui.log:
    2009.02.02 at 08:49:10:409: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) Formatted message
    2009.02.02 at 08:49:10:409: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) Formatted message
    2009.02.02 at 08:49:10:409: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) Rendering Page::pages/deployment/deploy_progress
    2009.02.02 at 08:49:10:421: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) In getVersionOnly()
    2009.02.02 at 08:49:10:965: Thread-24: IP - (ERROR) Error -: AIP-18510: Error adding objects to configuration CONFIG for business process cm_all_agreements
         at oracle.tip.configuration.B2BConfigurationBuilder.run(B2BConfigurationBuilder.java:452)
         at java.lang.Thread.run(Thread.java:534)
    2009.02.02 at 08:49:20:651: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) Found Non Validation Errors
    2009.02.02 at 08:49:20:651: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) Formatted message
    2009.02.02 at 08:49:20:651: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) Formatted message
    2009.02.02 at 08:49:20:662: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) Rendering Page::pages/deployment/deploy_error
    2009.02.02 at 08:49:20:673: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) In getVersionOnly()
    2009.02.02 at 08:49:27:961: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) Rendering Page::pages/deployment/config_list
    2009.02.02 at 08:49:27:971: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) Executing Query::SELECT DISTINCT C.ID, C.CLASSTYPE, C.name, C.LifeCycleState, CA.aud_modified FROM TIP_Configuration_t C, TIP_Configuration_t_AUD CA WHERE C.ID = CA.ID AND C.LifeCycleState IN ('Active','Validated','Quiescing','Quiesced') AND CA.aud_modified IN ( SELECT MAX(aud_modified) FROM TIP_Configuration_t_AUD WHERE ID = C.ID GROUP BY ID) ORDER BY CA.aud_modified DESC
    2009.02.02 at 08:49:27:978: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) In getVersionOnly()
    Please help as this renders our server useless.
    Best regards,
    Kamil

    Hi Kamil,
    I'm guessing you are talking about encountering these issues post MLR# 7 patch.
    Here are some of the things ypu could start off with:
    1. Check your LS Inventory to see if your patch was applied successfully
    2. Ensure that all the post installation steps were performed (in the readme file)
    3. You could rollback this patch and check if you are still getting the same error.
    4. After rollback, if your config works fine, rerapply the patch again and observe the effects.
    Thanks & Regards,
    Suhas.

  • How to set Actual indicator for Business Process

    Hi,
    Can anybody tell me as "how to set Actual indicator for Business Process " in Activity Based Costing.
    Regds,
    Bijay

    ok

  • Actual template allocation duplicate order posting

    Hi,
    We recently upgraded from 4.6C to 6.0. We use template allocation to allocate overhead to our process orders at month-end. We are doing our first month-end since going live on 6.0. When we ran tcode CPTD (actual template allocation) it posted the debit quantity and value to the process order twice, and the credit value to the business process only once. Therefore, the CO document is out of balance. We then run tcode CON2 to revalue the postings at actual price. Because of this error, we have a remaining un-allocated balance in our business processes for this month. We also have incorrect costsallocated to our process orders. How do we correct program CPTD, and correct these postings?
    Thanks...

    Hi
    I am using environment 9 yes.
    My formula is very simple:
    On Object I have:
    SenderCostCenter = '130570' AND
    SenderActivityType = 'LABORA'
    And then I have simply put "1" in Plan Quantity and Actual Quantity.
    So what it does is it allocates the unit cost of the combination of cost center 130570 and act. type LABORA one time to each material/order no matter lot size.
    Should I perhaps have put "1" into the Plan Fix and Actual Fix instead?
    Thanks

  • Timed out waiting for Business process

    Hi,
    I created a web application using evision in JCAPS 512. It works properly. But some times i am getting an error message as
    "Timed out waiting for business process" when i try to access the web page usign url.
    But if i invoke page again then application works properly.
    I have increased server response timeout value also. But couldn't get
    the reason when it will occur.
    Please let me know what is the reason for this problem. If this error occurs please let me know is it possible to show some other page instead of displaying error to user.
    Regards
    Venkatesh.S

    Good day.
    I have a similar problem and I have managed to pinpoint when it fails but unfortunately I don't know how to fix it yet.
    In my scenario, I have 2 separate processes:
    the first process reads data from a Seebeyond SRE instance and stores it on a local Java CAPS queue.
    The second process is an EVision process that reads the data from this queue and displays it on a page.
    Whenever I am not connected to the network linking my Java CAPS instance to the Seebeyond SRE instance (first process cannot connect ) I get this problem on the EVision side every second time I request a page. This means I can view the first message on the queue and then I have to restart the Logical Host
    This doesn't make sense to me, since The EVision process is a completely separate process, deployed in it's own WAR file.

  • Need table information for Business process ID and Business process status

    Hi Guys/Sap,
                         I need PI table for business process ID(BPM) and Business process status table .Kind if any one know help me out .
    I have checked blog but ia could only fine basic tables .
    https://wiki.sdn.sap.com/wiki/display/XI/Useful%20ABAP%20tables%20in%20SAP%20XI.
    Regards,
    Sriram

    Hi Sriram,
          Search SE11 for SWF* tables.
    Regards,
    Ravi

  • Questionaires for business process study

    Hi guru
    we are implementing sap fico in an oil industry.we need some questionaires for business process study.
    Kindly help.if any one is having & send that.
    Thanks

    hi,
    questionaires are vary from project to project, it is not wise to share,
    any way go through this site, it may be helpful,
    http://www.mediafire.com/?sharekey=1b20c39ed4caf3ddd2db6fb9a8902bda
    regards,
    rajen

  • Error while uploading pdf document for GP process  .

    Hi,
    I had developed a pdf form in Adobe designer and i'am tring to upload that file into Portal for GP process.But it is giving me an error as "<b>Could not retrieve template fields: Wrong document format or adapter mismatch from adapter</b>"
    Kindly help me in this issue.
    with regards
    Pradeep.B

    Deepak,
    Can you indicate the exact version of Adobe LiveCycle that is being used? Also, please let me know which application server, database and MS Office versions are being used.
    Also, please delete (or achive) your existing application server log files, and restart your application server. Then repeat the steps that lead to this error.
    Finally, please post the application server log files.

  • Error while executing application using Oracle Business Process Workspace

    Hi all,
    I created a simple application to find the length of the message entered and then re direct it to other task depending on the size. but while i try to run the application using Oracle Business Process Workspace, a new popup window is opened and my pre-described fields are shown, i fill the fields with values and when i try to submit/claim the task, it is giving me the following error :
    Error Code: 502 Proxy Error. The request was rejected by the HTTP filter. Contact your ISA Server administrator. (12217)I contacted my server administrator as well for the same, but he didn't find any server side error.
    Kindly help me solve this issue asap as i have my seniors waiting for this.
    Thanks and Regards,
    Debarati

    Try to fragment the 'ear' in less than 64k blocks or don't transmit as long raw.
    Please let me know if this works.

  • Effective Language for Business Process Modelling in a Web Community

    It's a very exciting idea of having business process definition/innovation a community driven process.
    Just Imagine a stituation where somebody can innovate a process on a theoritical level which is then perfected by   business community opinion/examples for benchmarking, effectiveness, relevance etc.
    The ultimate business community dream would be Finding their process in the community. Finding merits and demerits of their process. Explore for a refinement to the process. Getting a copy of their newly created process and
    droping it into their IT system and the wonderful IT system upgrading itself to the new process and executing it.
    The Impact of simplification would be enormous:
    Just check out the possibilities
    Every businessman would be an IT user to get ideas for business and business execution
    The IT Guy would be recognized as process maker
    For a business entity Presentation during AGM could be extra transparent :-).
    A very concrete step in this direction would be to have a language or tool which is very easy to understand and drives people for exploration.
    My Wish would be a Visual web tool which defines a specific business process in the most simple form, and from there somebody can explore the enhancements to the process.
    For example a simple selling process done in medicine shop is
    listening the order verbally , delivering it immediately, getting cash immediately and [typing the Invoice on XL or Word or POS machines], printing it and then giving to Customer.
    after selecting this business process on the tool one should be able to explore the possible process
    enhancements with known business benefits
    like
    a) offer credit facility to customer--> just a worklist to collect pending money
    b) take order now and supply later for non available medicines
    c)Start home delivery
    The businessman should be able to select (1) or (2) which then becomes his new process.
    This can be sent to his IT landscape which should be able to interprete it and then grow itself Ah.... 
    dreaming
    [or atleast the model should tell the IT guy what to do!!].
    The generic business Process enhancements Options are not too many and can be defined and classified
    See the Options in the above mentioned business process context
    1)Automation[Create Purchase order from ]
    2)Increasing depth [The above example a,b,c are for increasing depth]
    3)Step simplification[In the above example instead of word using the POS Machine is simple]
    4)Resource utilization[If you have a PC and don't want to buy POS Machine then type the invoice on a Word :-)]
    5)Delegation
    5)Workforce optimization {any examples :-)community driven}
    7)Process optimization (How to deliver the medicine route wise)
    8)Colloboration (Using courier to send medicine)
    9)Knowledge provision (giving sales/payment trends,)
    The idea is so simple but making this tool highiely context(business) sensitive and intuitive is challenge.
    But anyway it's not impossible to have a business process language which is effective and an IT systems for which starting point is a business process. The IT system which takes your business process and executes them
    wonderfully.
    looking forward for this future
    Anand
    Message was edited by: Anand Rai
    Message was edited by: Anand Rai

    Hi Dilip,
    Thanks a lot for your reply.
    I'm also interested to know from community what are different tools used by them for process modelling?
    What are their merits?
    1)are they easily understandabale
    2) do they come with business context
    3)whether they can be used in a web comunity? Like somebody can give feedback or business case for a particular business process/step.
    4)Does it drive the IT automation
    5)Are there any appservers which take business model and generate/grow applications
    6)How the different modelling applications should communicate?
    7)Common standards
    For example
    I have used rational rose and RAD like VB they are complicated/simple enough to generate model based applications but the business representation and business context is totally missing. I would seek something with more business context or knowledgebase.
    Regards Anand

  • Using ARIS process models as the foundation for Business Process Monitoring

    Hello,
    Do anyone know if you can use IDS Scheer ARIS process models and the integration between IDS Scheer ARIS and SAP Solution Manager as the starting point for end-to-end Business Process Monitoring (BPM) so that you get the process description/model automatically in Solution Manager BPM and just need to configure the monitoring (more or less that you monitor against the modelled process in ARIS)?
    Is there an API for SAP Solution Manager BPM so that non-SAP solutions/systems can be part of the end-to-end process monitoring?
    If not, how do you usually integrate non-SAP solutions that are part of an end-to-end process that you want to monitor into SAP Solution Manager BPM, or do you not use Solution Manager BPM for this?
    What is the roadmap for SAP around SAP Solution Manager BPM when it comes to non-SAP systems/applications/solutions and the new SAP NetWeaver BPM functionality?
    Regards,
    Markus Johansson

    Hello Markus,
    I just paste my answer form the other forum entry Re: Business process management strategy in SAP?
    in a nutshell BPM Netweaver is focussing on so called edge-processes (usually
    SOA-based and often workflow related). These edge-processes a thought to enhance exisitng core business processes and should provide the fast competitive edge versus competitors. Examples would be also xApps. For this Netweaver provides process modelling tools, where you can get exectuable code through the integration between CE and PI. The monitoring part for these processes is mainly targeting business end-users and business manager.
    Business Process Monitoring with Solution Manager focusses on core business processes which are realized with the "conventional", "old" SAP Architecture, e.g. Order-to-Cash or Procure-to-Pay. You get a combination of technical monitors (average response times of transactions, background job runtimes, monitors for IDOC or qRFC processing) and application related monitors (you get more than 200 pre-configured application monitors out-of-the-box like number of overdue customer orders or outbound deliveries or number of deliveries with goods issue posted but no invoice). The target group here is the support organization of the customer, from Basis-Support over application support on IT side to process owner on business department side.
    Overview presentations can be found under
    https://service.sap.com/bpm --> Media Library --> Customer Information -->
    "Business Process Monitoring - Part 1 & 2".
    Or look under https://www.sdn.sap.com/irj/sdn/nw-processmonitoring
    In the end BPM Netweaver and BPMon SolMan are complementary for different purposes and different target groups.
    Best Regards
    Volker

  • Roles for Business Process Monitoring

    Hi Expert,
    I'm working with sap solution manager and Business Process Monitoring.
    It works fine but I need to create particular roles for my users.
    I have created one solution with 2 business scenarios (scenario 1, scenario 2) and 10 Business Processes for each scenario.
    I would know if exist a role in order to allow user 1 to see only BP in  scenario 1 and allow user 2 to see only BP in  scenario 2.
    I saw roles: SAP_OP_DSWP_BPM and SAP_SMWORK_BPM but I didn't find any suitable authorization object to use.
    Thanks for collaboration
    best regards
    gio'

    Hi Giovanni,
    the answer is unfortunately no. There is no authorization object available that limits the visibility of business processes. You could only split by solution, so creating two solutions each containing 10 business processes.
    In general you can find information about roles and authorizations in SAP note 834534. There are several MS Excel files attached to this note.
    Best Regards
    Volker

Maybe you are looking for