Error in Analyze setting program - 1KE1
Dear All Experts,
When I am running report 1KE1 error analyze setting program in CO. I am getting below two errors. I went through SDN threads I didn't get any post related.
Errors as below :
1 ) No control indicators have been maintained for actual data
2 ) No control indicators have been maintained for plan data
I have tried execution button attached to it, it is alos not executing the related T.code I guess.
If anybody has gone through the same, please guide. It will be helpful.
Regards,
Reva.
Moderator: This is standard SAP message which is quite clear. You are kindly asked to follow the rules of SDN forum and avoid asking basic questions
Hi Srinivasa,
Got solved plan data error, I given 1900 year and saved. Actual data still exist. Any check boxes need to tick for that ?
Regards,
Revati Joshi.
Similar Messages
-
Runtime error in Power set program
I don't understand what's wrong here so if anyone could help, I'd appreciate it.
Thanks.
Runtime error:
Exception in thread "main" java.util.ConcurrentModificationException
at java.util.HashMap$HashIterator.nextEntry(Unknown Source)
at java.util.HashMap$KeyIterator.next(Unknown Source)
at PowerSetGenerator.generatePowerSet(PowerSetGenerator.java:36)
at PowerSetGenerator.generatePowerSet(PowerSetGenerator.java:28)
at PowerSetGenerator.main(PowerSetGenerator.java:10
Line 10: generatePowerSet(setA);
Line 36: Set2.add(iter.next());
Line 28: generatePowerSet( (Set<E>) v);
Code:
import java.util.*;
public class PowerSetGenerator<E> {
public static void main(String[] args)
Set<Integer> setA = new HashSet<Integer>();
setA.add(3);
setA.add(2);
setA.add(1);
generatePowerSet(setA);
System.out.println(setA);
public static <E> Set<Set <E>> generatePowerSet(Set<E> v){
Set<E> result = new HashSet<E>();
if (v.isEmpty())
Set<E> tempSet = new HashSet<E>();
v.addAll(tempSet );
return (Set<Set <E>>) v;
else {
Iterator<E> iter = v.iterator();
E x = iter.next();
v.remove(x);
generatePowerSet( (Set<E>) v);
v.add(x);
while (iter.hasNext())
Set<E> Set2 = new HashSet<E>();
Set2.add(iter.next());
Set<E> Set3 = new HashSet<E>();
Set3.add(x);
result.addAll(Set2);
result.addAll(Set3);
return (Set<Set <E>>) result;
}okay I removed the x in it...I noticed that
It still doesn't run right though
Exception in thread "main" java.util.ConcurrentModificationException
at java.util.HashMap$HashIterator.nextEntry(Unknown Source)
at java.util.HashMap$KeyIterator.next(Unknown Source)
at PowerSetGenerator.generatePowerSet(PowerSetGenerator.java:36)
at PowerSetGenerator.generatePowerSet(PowerSetGenerator.java:28)
at PowerSetGenerator.main(PowerSetGenerator.java:10) -
SAP BEX Analyzer Set values for variables
Please help us out in sorting out this problem,
We are automating BEx Analyzer for a Testing Project with Quick Test Professional (QTP) a functional automation tool uses VB script.
Problem:
There are 5 steps in automation
Invoke BEx Application
Log in to BEx server
Run Query
Set values for Variables for Query
Display Report
We are able to do 1,2,3 steps using BEx API functions and running BEx macros but we struck up with 4th step,
1. Invoke BEx Application
Launch Excel
Dim app
Set app = createobject("Excel.Application")
Make it visible
app.Visible = true
Attach add-in to Excel file
app.Run ("'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SetStart")
2. Log in to BEx server
Login to Bex server
Function logonToBW(app)
Dim myConnection
Dim logonToBW2
On Error Resume Next
logonToBW2 = True
' Create logon to system with following user and system details
Set myConnection = app.Run ("'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'! SAPBEXgetConnection")
With myConnection
.client = "600"
.User = "USERNAME"
.Password = "Welcom123"
.Language = "en"
.systemnumber = "00"
.System = "BWDCLNT600"
.systemid = "BWD"
.ApplicationServer = "156.158.7.161"
.SAProuter = ""
.Logon 0, true
If .IsConnected = 0 Then
.Logon 0, False
If .IsConnected <> 1 Then
MsgBox "Automatic logon failed. Please enter your username and password in the next screen ..."
Exit Function
End If
End If
End With
' Run connection query to see if connected
app.Run ("'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXinitConnection")
logonToBW2 = True
End Function
3. Run a Query
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'! runQuery", "ZZCCA3_M01_Q0003"
Till here the script is running fine then the Select values for Variables window is displayed.
This is where exactly we struck up; in this window we need to select values.
Name of the Fields
Field Name Technical name of characteristic Variable Name Value
1 Company Code 0COMP_CODE ZM_COMPCODE 1000
2 Cost Center Hierarchy 0COSTCENTER ZS_CCTRN 1000MDON
3 Cost Center Node 0COSTCENTER ZS_CCTRN 1000COP
4 Cost Element 0COSTELEMENT ZS_COELN 1000GDON_6999
5 Fiscal Year 0FISCYEAR 0P_FYEAR 2007
To select values for variables, we are trying below code but its giving an error,
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 1000, "0COMP_CODE"
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 1000MDON, " 0COSTCENTER "
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 1000COP, "0COSTCENTER"
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 1000GDON_6999, "0COSTELEMENT "
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 2007, " 0FISCYEAR"
Any help highly appreciated, thanks in advance.Hi Reinhard,
Pleas look at this:
Passing a range to SAPBEX.XLA!SAPBEXSetFilterValue
Best regards,
Eugene -
A way to display error messages from the program
Dear all,
I am looking forward to display a set of error messages(in a internal table) during the execution of the program to the user.
I wanted to know the better way of displaying error messages from my program with more options.
Well I tried out using displaying errors as ALV list/Grid or as simple list processing.
But I found some stanadard transactions (Like in MM and FI where errors are shown in a better way, but failed to find out how they are done.
Please guide me.
Thanks in advance
AryanTry to use application logging it has a very good way to display a set of messages.
[http://abap4.tripod.com/Using_Application_Logging.html|http://abap4.tripod.com/Using_Application_Logging.html]
Run this report in se38 an example sap report to understand logging way to show a set of messages
Report Name : SBAL_DEMO_01
Edited by: Vighneswaran CE on Dec 19, 2010 3:01 PM
Edited by: Vighneswaran CE on Dec 19, 2010 3:11 PM -
have 2 rd web servers set up using an nlb cluster
3 rd sesison host servers - dns round robin
session broker (installed on dc)
web single sign on is in place using cert generated internally on standalone ca
I have added several programs to list on all session host servers and allows "domain users" access to them.
regardless of the account that logs on I get the error "the following remoteapp program is not in the list of authorized programs: WordPad
I have tried various things but I am sure the setup is correct.. any ideas?Hello,
Based on my experience on similar issues, this error may be caused by missing Host Records of the TS servers on the local DNS.
To fix this issue, please add the Host Records of the Terminal Servers into the local DNS and test it again.
Let us know the result if possible. Thanks.
Best Regards,
Lionel Chen -
Clone dbtier error-- ERROR : Unable to set CLASSPATH
i am setting a new clone of PROD server.i restored the backup from prod and now i ran
perl adpreclone.pl dbTier
Here is the error message-->
perl adcfgclone.pl dbTier
Enter the APPS password [APPS]:
xxxx
ERROR : Unable to set CLASSPATH
/u02/lifedb/9.2.0/appsutil/clone/bin/../jlib/classes111.zip: is missing
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
Error: can't find libjava.so.
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_1376.err file for errors
The err file does not have anything.
I added /u02/lifedb/9.2.0/jdbc/lib to path and classpath. classpath is empty. I made cc,ar,ld,make,perl come in the path as well.
Now how do i resolve the above err?
ThanksIf you want to migrate from Solaris to Linux, refer to:
For the application tier:
Note: 238276.1 - Migrating to Linux with Oracle Applications Release 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=238276.1
For the database tier:
Note: 362205.1 - 10g Release 2 Export/Import Process for Oracle Applications Release 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362205.1
Note: 331221.1 - 10g Export/Import Process for Oracle Applications Release 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=331221.1
Note: 230627.1 - Export/Import Process for Oracle Applications Release 11i Database Instances Using Oracle9i Enterprise Edition
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230627.1 -
I am using jcreator where i am getting this error while compiling
Error : Invalid path, "C:\Program Files\Java\j2re1.4.2_05\bin\javac.exe" -classpath "C:\Program Files\Xinox Software\JCreatorV3LE\MyProjects\zeroCode\classes" -d C:\Program" Files\Xinox "Software\JCreatorV3LE\MyProjects\zeroCode\classes C:\Program" Files\Xinox Software\JCreatorV3LE\MyProjects\zeroCode\src\BasicServiceLister.java
Instead of that same program is compiling in textpad/eclipse easily.
Please tell me what should i do to set what.
present settings are:
User Variable:
classpath C:\Program Files\Xinox JCreatorV3LE\MyProjects\zeroCode\ classes
Java_HOme: C:\Program Files\Java\j2re1.4.2_05\bin\javac.exe
Path:C:\Program Files\Java\j2re1.4.2_05\bin
Classpath is System Variables:
C:\Program Files\Xinox Software\JCreatorV3LE\MyProjects\zeroCode\ classes
Path :C:\Program Files\Java\j2re1.4.2_05\bin
wher i really need to modify the settings:
May be thorugh command prompt.
I never did. windowds environment varaibles i can set.
Thanks
Vijendra... -d C:\Program" Files\Xinox "Software\JCreatorV3LE\MyProjects\zeroCode\classes ...
Looks like you are typing in things wrong with the double quotes. -
ITunes installation error: does not have program associated with it for performing this action
Repeated tries to install iTunes continues to fail. Installing on Acer laptop using Windows 7.
Error: does not have program associated with it for performing this action
We have done the following: open Default programs, clicked associate a file type, clicked on change program button and selected a program to open with and clicked OK/enter.
The installation continues. we get to the finish window; click finish.
Next error: iTunes has been installed incorrectly.
So, what do we do to get iTunes working?
Thank you.Hi normeagle,
Welcome to Apple Support Communities.
You may find this article helpful for troubleshooting your iTunes installation:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Best,
Jeremy -
all of a sudden I'm getting a 'itunes.exe - system error It says the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. I have tried to reinstall and still can't open itunes. help!
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Error in executing ABAP program. Error occurred when creating dataset
hi,
when I use LKM SAP ERP to Oracle (SQLLDR) to extract data from SAP ERP server. I execute my interface, and it's stop at extract data step.
This is message:
java.lang.RuntimeException: Error occured in open tool execute method...Error in executing ABAP program...Error in executing ABAP program...Error occurred when creating dataset/abc/ZODI_13001_6001_GLOBAL.txt
I tried others path name, tried slash or backslash. This is content in code tab
OdiSAPAbapExecute "-UPLOAD=1" "-EXECUTE=1" "-EXECUTEBASE_RKM=0" "-ZRFC_RUN_INSTALL=1" "-ABAP_PROGRAM_NAME=ZODI_13001_6001" "-HOST=10.86.87.24" "-USER=sv_hoa" "-PASSWORD=<@=snpRef.getInfo("SRC_PASS") @>" "-SAP_CLIENT=800" "-SAP_LANGUAGE=EN" "-SAP_SYSTEM_NUMBER=02" "-SAP_FUNCTION_GROUP_NAME=ZODI_FGR_13001" "-CONNECTION_POOL_NAME=SAP_ODI_ERP_POOL_10.86.87.24" "-CONNECTION_POOL_SIZE=10" "-FILE_DELIMITER=<@=""+(char)8@>" "-FILE_NAME=ZODI_13001_6001_GLOBAL.txt" "-FTP_HOST=10.86.82.108" "-FTP_USER=anh" "-FTP_PASSWORD=<@=sFtpPassword@>" "-FTP_PASSIVE_MODE=1" "-FTP_TRANSFER_TIMEOUT=100000" "-ODI_VARIABLE_NAMES=" "-ODI_VARIABLE_VALUES=" "-USER_ABAP_PARAMETER_NAMES=IV_DELIMITER,CHAR3;IV_FILENAME,CHAR255;IV_USER,CHAR35;IV_PWD,CHAR35;IV_HOST,CHAR35;IV_HASHVALUE,CHAR35;IV_PATH,CHAR35;IV_MAX_ROW_CNT,SYTABIX;IV_FETCH_BATCH_SIZE,SYTABIX;" "-USER_ABAP_PARAMETER_VALUES=<Value>" "-USER_ABAP_PARAMETER_SEPARATOR=<Value>" "-ABAP_TABLE_PARAMETERS=RETURN,BAPIRETURN;ET_FILE_RETURN,BAPIRET2" "-ABAP_EXPORT_PARAMETERS=ERRORMESSAGE;SY-MSGV1" "-LOG_FILE_NAME=C:\Users\anh\AppData\Local\Temp\SapAbapExecuteOpenTool_13001.log" "-FTP_PATH=/abc/" "-DEV_CLASS=ZODI_DEVCLASS" "-MAX_ROW_COUNT=" "-FETCH_BATCH_SIZE=100000" "-HASH_VALUE_MARKER=HVM" "-ABAP_PROGRAM_BODY=
*Final Type declarations
TYPES : BEGIN OF ty_final,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final.
*Final Temp Type Declarations
TYPES : BEGIN OF ty_final_tmp,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID ,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH ,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH ,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH ,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI ,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU ,
END OF ty_final_tmp.
*Final Target Type Declarations
TYPES : BEGIN OF ty_final_target,
C0_Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
C5_Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final_target.
* Table type for Y03HOCSINH
TYPES : BEGIN OF ty_Y03HOCSINH,
HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_Y03HOCSINH.
TYPES: BEGIN OF gs_text,
line(843) TYPE c,
END OF gs_text.
*Structure Declarations
DATA: wa_final_string TYPE string,
wa_final TYPE ty_final,
wa_final_target TYPE ty_final_target,
wa_Y03HOCSINH TYPE ty_Y03HOCSINH,
*Table Declarations
tt_final TYPE STANDARD TABLE OF ty_final,
tt_Y03HOCSINH TYPE STANDARD TABLE OF ty_Y03HOCSINH,
tt_final_target TYPE STANDARD TABLE
OF ty_final_target,
tt_final_tmp TYPE STANDARD TABLE OF ty_final_tmp,
tt_final_tmp1 TYPE STANDARD TABLE OF ty_final,
gt_result TYPE STANDARD TABLE OF gs_text,
*Variable Declarations
lv_path TYPE string,
lv_flag TYPE char1,
C0_Y03HOCSINH_HOCSINH_ID TYPE
STRING,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
STRING,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
STRING,
C3_Y03HOCSINH_GIOI_TINH TYPE
STRING,
C4_Y03HOCSINH_DIA_CHI TYPE
STRING,
C5_Y03HOCSINH_GHI_CHU TYPE
STRING,
wa_final_tmp TYPE ty_final_tmp,
lv_file TYPE string,
lv_datum TYPE sy-datum,
lv_date TYPE char10,
wa_result TYPE string,
lv_delimiter type string,
lv_cnt TYPE sytabix,
*-Cursor Declaration
lv_Y03HOCSINH_dbcur TYPE cursor,
lv_tabix_frm TYPE sy-tabix.
lv_delimiter = iv_delimiter.
IF iv_hashvalue = 'HVM'.
*Open/delete output file
CONCATENATE iv_path iv_filename INTO lv_path.
*Check for file existence, if found, delete it
OPEN DATASET lv_path FOR INPUT
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
DELETE DATASET lv_path.
ENDIF.
*Open/create output file
OPEN DATASET lv_path FOR APPENDING
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
*Batch Processing
OPEN CURSOR WITH HOLD lv_Y03HOCSINH_dbcur FOR
SELECT HOCSINH_ID
MA_HOC_SINH
TEN_HOC_SINH
GIOI_TINH
DIA_CHI
GHI_CHU
FROM Y03HOCSINH.
DO.
*Check for the counter, only for first batch
*process new line is required...
lv_cnt = lv_cnt + 1.
REFRESH tt_Y03HOCSINH.
FETCH NEXT CURSOR lv_Y03HOCSINH_dbcur
APPENDING TABLE tt_Y03HOCSINH
PACKAGE SIZE IV_FETCH_BATCH_SIZE.
IF NOT tt_Y03HOCSINH IS INITIAL.
ELSE.
EXIT.
ENDIF.
LOOP AT tt_Y03HOCSINH INTO wa_Y03HOCSINH.
MOVE wa_Y03HOCSINH-HOCSINH_ID
TO wa_final_tmp-Y03HOCSINH_HOCSINH_ID.
MOVE wa_Y03HOCSINH-MA_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_MA_HOC_SINH.
MOVE wa_Y03HOCSINH-TEN_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_Y03HOCSINH-GIOI_TINH
TO wa_final_tmp-Y03HOCSINH_GIOI_TINH.
MOVE wa_Y03HOCSINH-DIA_CHI
TO wa_final_tmp-Y03HOCSINH_DIA_CHI.
MOVE wa_Y03HOCSINH-GHI_CHU
TO wa_final_tmp-Y03HOCSINH_GHI_CHU.
APPEND wa_final_tmp TO tt_final_tmp.
ENDLOOP.
free : tt_Y03HOCSINH.
LOOP AT tt_final_tmp INTO wa_final_tmp.
MOVE wa_final_tmp-Y03HOCSINH_HOCSINH_ID
TO wa_final_target-C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_tmp-Y03HOCSINH_MA_HOC_SINH
TO wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH
TO wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_GIOI_TINH
TO wa_final_target-C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_tmp-Y03HOCSINH_DIA_CHI
TO wa_final_target-C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_tmp-Y03HOCSINH_GHI_CHU
TO wa_final_target-C5_Y03HOCSINH_GHI_CHU.
Append wa_final_target to tt_final_target.
ENDLOOP.
free : tt_final_tmp.
Clear wa_final_target.
IF NOT iv_max_row_cnt IS INITIAL.
Loop at tt_final_target into
wa_final_target TO iv_max_row_cnt.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ELSE.
Loop at tt_final_target into wa_final_target.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ENDIF.
free : tt_final_target.
IF NOT gt_result IS INITIAL.
CLEAR wa_result.
LOOP AT gt_result INTO wa_result.
TRANSFER wa_result TO lv_path.
ENDLOOP.
ENDIF.
REFRESH gt_result.
*End of main loop for batching
ENDDO.
*Close dataset
CLOSE DATASET lv_path.
CLOSE CURSOR lv_Y03HOCSINH_dbcur.
ELSE.
DATA: lv_mesg TYPE string.
CLEAR et_file_return.
et_file_return-type = 'E'.
CONCATENATE
'Error occurred when creating dataset' lv_path
INTO lv_mesg.
et_file_return-message = lv_mesg.
Append et_file_return.
ENDIF.
ELSE.
CLEAR et_file_return.
et_file_return-type = 'E'.
et_file_return-message =
'Installed ABAP program does not match interface definition'.
APPEND et_file_return.
ENDIF.
Thanks for helpr u able to figure it out..........i got the same error .......can someone help me fix this issue
-
Spoiler (Highlight to read)
I have a HP Photosmart Premium C310a All-In-One I can not open solution center get the message I wrote as a subjekt.I´ve tried a lot of methods I´m 75 years old and I´m tired of this problem! I´ve got 2 computers one HPdv5009 with W.XP Home Edition and it works free from problem The solution center opens up without any problem but on the other HP dv7 with W.7 Home Premium 64 Solution center did not like my order to open up! Parsing error in file etc. That is the answer I got!
Please Help Me anybody!
This question was solved.
View Solution.Hello-
I have included a link where the issue has been resolved. Look for the file that is in grreen_apple's post. (attachment)
http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Parsing-error-in-file-c-Program-Files-HP-Di...
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald -
The HP Solution Centre has disappeared from my toolbar and we I attempt to open it with the program file I receive the above error
Hi ... I have the same kind of error message:
Parsing error in file C:\Program Files (x86)\HP\Digital Imaging\bin\hpqscloc\1033.xml
Have been searching for a solution, using different sort of key words, no luck so far.
Anyone here? Many thanks in advance. -
Error while running the program of deferred Tax ( New)Program Name RFUMSV50
Hi
I am getting the error while running the program of deferred Tax ( New)
Following is the detailed error :
Enter rate / INR rate type M for 00.00.0000 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction.
Thanks & Regards,
PMCheck the following notes:-
1) Note 46582 - 2.2->3.0: error SG105 for exchange rate M w. inv.
2) Note 165645 - SG105:Enter rate & / & rate type & for 00.00.0000..
3) Note 483542 - F110: SG105 in maintenance of proposal run with wthhldng tax
4) Note 975657 - SG 105: FI-Enjoy with foreign currency and calculate tax
thanks
G. Lakshmipathi -
Error, while calling driver program for Smartforms
Hi All,
I am getting a error while running DRIVER PROGRAM of smart form.
both driver program and smart form running successfully without any error while executing separately. But
while calling Smart Form from driver program. it is giving error as :-
*Events are already defined.*
Description :- You tried to define events for a section, but a section with
events is already active. You are not allowed to nest events.
Regards,
Pavan.MThis is nothing to do with coding, this coz of error is from smartforms....
Regards,
Pavan.M -
InfoSet Query: Syntax Error while generating the program.
Dear All,
I have a Query in CRM system which contains an Infoset based on LDB.
The InfoSet Query throws up a Syntax error while generating the program.
So, we are not able to change the Infoset using the Infoset Query through SQ01.
The error is as follows:-
Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
Error in the ABAP Application Program
The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
line 28:
""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
"ernal tables, strings, references, or structures as components. -"
Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
Awaiting your reply as soon as possible.
Thanks and Regards,
Pankaj.There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there.
Maybe you are looking for
-
Hello both my wife and I have iphone 4's and recently I upgraded the firmware to the 4.0 and noticed I had calender invites witch is great so we can both send each other our schedules... However when I looked at hers there was no calender invite butt
-
Convert XML payload to HTML form data in Receiver HTTP Adapter
Hi, I want to make a HTTP request ( Receiver HTTP Adapter ) to a servlet where I need to send the payload in HTML form format ( name=value ). As per the help document: A typical HTML form comprises named fields. When transferring a completed form to
-
Inbound IDOC Mass processing - No status message
Hi Friends, I am updating a database table using inbound IDOC. But in batch job when XI passes multiple IDOCS, for some IDOCs there is no status message even though i coded for status message. If i rerun IDOC in BD87 then it work fine. please help. r
-
How to Use Vibe x2 Theme Center??
I have a question: How do we use theme center to get a new theme??? I downloaded the Chinese version of it, bu i cannot use the theme because of non suitable with Vibe x2 EU version. So, i would like to learn that: If we cannot download any themes, w
-
CER Use port description as port location
Hello all, I am trying to confirm if this "feature" is as useless as I have found it to be. From my testing and what little documentation I can find when checking the "Use port description as port location" check box on the LAN switch details screen