Error in Associating the Oracle Cache Administration user with the Cache Database

hi good eve,
i have done Configuration on the Oracle Database such as
1.create tablespace ttusers
2.running initCacheGlobalSchema.sql
3.creating cache administration user with username cacheadm
4.running grantCacheAdminPrivileges.sql
5.granting object privileges on tables to cacheadm
on Setting Up a Cache Database
i already created cache database my_ttdb
here i created and granted the cacheadm user as admin
then
{code}
Command> connect "dsn=my_ttdb;uid=cacheadm;oraclepwd=cacheadm";
Enter password for 'cacheadm':
Connection successful: DSN=my_ttdb;UID=cacheadm;DataStore=C:\TimesTen\DataStoreP
ath\my_ttdb;DatabaseCharacterSet=AL32UTF8;ConnectionCharacterSet=US7ASCII;DRIVER
=C:\TimesTen\TT1122~1\bin\ttdv1122.dll;LogDir=C:\TimesTen\logs;PermSize=40;TempS
ize=32;TypeMode=0;OracleNetServiceName=XE;
(Default setting AutoCommit=1)
con1: Command> call TTCACHEUIDPWDSET('cacheadm','cacheadm');
5220: Permanent Oracle connection failure error in OCIServerAttach(): ORA-12154
: TNS:could not resolve the connect identifier specified rc = -1
5935: Could not validate Oracle login: uid = CACHEADM, pwd = HIDDEN, OracleNetS
erviceName = XE, TNS_ADMIN = "C:\TimesTen\TNS_AD~1", ORACLE_HOME= ""
The command failed.
{code}
can you please help in solving this problem sir....
thanking you,
prakash

THe main issue is this:
TNS:could not resolve the connect identifier specified rc = -1
TimesTen is not able to resolved the TNS name 'XE'. You need to be sure that (a) your TimesTen instance is correctly configured with the correct value for TNS_ADMIN. This should have been specified at install time but if not you can change it by running ttModInstall as the instance administrator. You will need to shutdown the main daemon and re-start it after making this change. Also, all users who will access Timesten need to have the environment variable TNS_ADMIN, set to the right value, present in their environment.
Chris

Similar Messages

  • Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.

    Hello,
    Suddenly the working CRM is being stopped for some group of users.
    I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
    But for other domain user having problem to access CRM.
    I tried to add a user from a domain which is not of CRM domain then it gives following error.
    "Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
    <Message>LookupAccountNameW failed with error</Message> "
    The change is made - AD group have upgraded Activer Directory server to 2012 R2
    Please help as the Production CRM is not working for other domain user.

    We have Activer Directory Structure like below.
    One Root Domain says A
    and there are multiple child domain like B,C,D etc...
    B,C and D are all in same level,they are child of A domain.
    There are two way transitive trusts between A and all the child Domain.
    But there is no trust in between B and C and so on.
    Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
    If this post answers your question, please click &quot;Mark As Answer&quot; on the post and &quot;Mark as Helpful&quot;

  • The report terminated with error:  REP-501: The specified database cannot b

    Dear All,
    We are usning forms and reports 11g in weblogic . while running the reports from forms
    frequently getting the error The report terminated with error: REP-501: The specified database cannot be connected..
    Can anyboby help me to solve this problem

    REP-501 typically means that Oracle Reports are unable to locate any available Oracle Databases. By default, Oracle Reports (similar to Oracle Forms) will only look for available databases in tnsnames.ora. Not only that, but the Reports environment by default will always look for the tnsnames.ora file in %ORACLE_INSTANCE%\config ($ORACLE_INSTANCE/config in Unix). I have seen these scenarios happen before especially if the TNS_ADMIN variable for your Forms environment variables is a directory different from %ORACLE_INSTANCE%\config. This would be the first place I would look.
    If tnsnames.ora is located in %ORACLE_INSTANCE%\config, do all generated reports fail with this message or a select amount of them? If only a select amount of them, are there any similarities with these reports (e.g, size, parameters, etc.)?
    Thanks,
    Scott
    http://pitss.com/us

  • Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD

    Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.

    The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names.  This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
    for this DNS name exisits in the DNS database.  Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
    service on this computer is restarted.

  • Cs6 installation error, inconsistency in the installer database, exit code 15

    Hi,
    I'm trying to install Photoshop CS6 on my new Mac.
    After 2% have been installed, I get the error message "CS6 installation error, inconsistency in the installer database."
    The error summary file shows exit code 15 and 0 fatal errors/errors/warnings.
    I have seen other threads in this forum with the same error and I have tried the suggestions made there but so far, no luck.
    My Photoshop CS6 is a downloaded version from the Adobe webpage. Everything works well until the actual installation starts.
    These are the actions I have tried:
    1. Restart and reinstall
    2. Adobe cleaner tool (no result since there was nothing to clean)
    3. I have deactivated the software from my old computer
    4. Tried to install in safe mode
    5. I have been in touch with Adobe support, did not get much support at all. After some time I was told to start a discussion in this forum.
    Please help... spent two days on this already.

    Jeff, thank you for your answer.
    I have tried to follow the instructions on the link you provided. So far I have not succeded though.
    I downloaded the latest version of the Adobe Application Manager. But for some reason, when I start the application, the Creative Cloud application starts... I don't know what I am doing wrong in this step. I do not use creative cloud and Photoshop CS6 is not available for installation there, only Photoshop CC.
    How do I install the software through Adobe Application Manager and not the installer that was provided with the download of Photoshop CS6?

  • Acrobat 9 installed on Windows 8.1; upon Save, error every time: "The Organizer Database is damaged and will be reset..."; no "Organizer90" file found (to be deleted, as www suggests for solution with XP, VIsta, 7)

    I've installed my old faithful Acrobat 9 Pro on my new Windows 8.1 computer. The program works, but every time I save the document, it tells me "The Organizer Database is damaged and will be reset. Quit the program and close all browsers." (Something close to that text.) I've entered the error online, and a solution does appear for XP, Vista, and Windows 7. It tells me to have Windows Explorer show hidden files, and then look for "Organizer90" within Users/[me]/AppData/LocalLow/Adobe/Acrobat/9.0, and then delete that file -- which will make Acrobat generate a new one. But there is no such file there. Please help with alternate solution. NOTE: When I "Check for Updates" in Acrobat, I'm told that there are no updates available at this time, but also told: "Please note that some updates for the following products cannot be determined at this time: Adobe Updater." Seems like things are out of whack.

    Thanks for help. Difficulties continue: When trying to install 9.5.5, I'm told it can't install because the program may not be on my computer, or may be the wrong version. I'm told to check that the program exists. The installed version (9.0) is totally legit, my serial numbers, etc., I've used it for many years. Automatic update seems to be on, but I downloaded Adobe Updater to be sure. Seemed to make no difference. Program does function, but not perfectly. Under "About," it calls itself 9.0, so it would not seem that auto update is taking place. Acrobat on previous machine (Windows Vista) indeed calls itself 9.5.5. (It was installed with same 9.0 package, and presumably updated itself to 9.5.5 over the years.) So summary of current problem: Acrobat 9.0 won't upgrade to 9.5.5 on Windows 8.1.

  • Oracle 9iAS administration tool with GUI??

    Hello,
    Has Oracle9iAS an administration tool with a GUI (web tool or similar...)??
    I found some console commands to start/stop and deploy some EJB but it's too bored.
    If this tool exists, please tell me how can I access to it.
    Thanx in advance.
    Byeee

    In Oracle9iAS Release 2, V902, the web based EM tool provides the entier OC4J administration capabilities including application deployment.
    Regards
    Pavna Jain
    Oracle9iAS Product Management

  • Oracle Apps 11i Cloning with +ASM 10g Database

    Hi,
    Can somebody help Apps cloning on the issue facing. Please provide in detailed process Apps Cloning with +ASM.
    Trying to Clone 11i Apps environment(11.5.10.2) and Db 10.2.0.4. The database is on +ASM.
    1. Copied all the application files from SOURCE to TARGET ( source and target are different servers)
    2. Database restored from source and the TARGET database is up and running( Database servers TARGET and SOURCE are 2 different servers.
    3. As per doc id 230672.1 , preclone was successful in apps and db servers.
    ISSUE:
    =====
    As per doc id 230672.1 , if we run adcfgclone on database server that messedup the database which is running already on the TARGET server, because adcfgclone recreate control files and all which is already intact for us in +ASM.
    Question:
    ======
    1. do we still need to do anything on the TARGER database server? if need to run , please provide the detailed steps
    2. Do we need to run adcfgclone on apps server? please provide the detailed steps.
    Thank You,
    Dheeru.

    Yes, restored and the database is up and running.
    Then i ran adcfgclone dbtier on database which messedup whole database. Deleted all the file in ASM disk groups and try to restore the database threw RMAN.
    Got new error, Please see below.
    In the first run previously i got same error but fixed by creating control_files='+LASR','+FLASH' in pfile, again it's giving same error.
    Also pasting PFILE.
    Any idea on this.
    Recovery Manager: Release 10.2.0.4.0 - Production on Wed Jan 5 17:15:12 2011
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    connected to target database: LASRT (DBID=1482364021)
    connected to auxiliary database: LASRX (not mounted)
    RMAN>
    RMAN> 2> 3> 4> 5> 6> 7> 8> 9>
    executing command: SET until clause
    using target database control file instead of recovery catalog
    allocated channel: aux1
    channel aux1: sid=872 devtype=DISK
    allocated channel: aux2
    channel aux2: sid=871 devtype=DISK
    Starting Duplicate Db at 05-JAN-11
    contents of Memory Script:
    set until scn 11188183994442;
    set newname for clone datafile 1 to new;
    set newname for clone datafile 2 to new;
    set newname for clone datafile 3 to new;
    set newname for clone datafile 4 to new;
    set newname for clone datafile 5 to new;
    set newname for clone datafile 6 to new;
    set newname for clone datafile 7 to new;
    set newname for clone datafile 25 to new;
    set newname for clone datafile 26 to new;
    set newname for clone datafile 38 to new;
    set newname for clone datafile 43 to new;
    set newname for clone datafile 44 to new;
    set newname for clone datafile 45 to new;
    set newname for clone datafile 46 to new;
    set newname for clone datafile 47 to new;
    set newname for clone datafile 48 to new;
    set newname for clone datafile 49 to new;
    set newname for clone datafile 50 to new;
    set newname for clone datafile 51 to new;
    set newname for clone datafile 52 to new;
    set newname for clone datafile 53 to new;
    set newname for clone datafile 54 to new;
    set newname for clone datafile 55 to new;
    set newname for clone datafile 56 to new;
    set newname for clone datafile 57 to new;
    set newname for clone datafile 58 to new;
    set newname for clone datafile 59 to new;
    set newname for clone datafile 60 to new;
    set newname for clone datafile 61 to new;
    set newname for clone datafile 62 to new;
    set newname for clone datafile 63 to new;
    set newname for clone datafile 64 to new;
    set newname for clone datafile 65 to new;
    set newname for clone datafile 66 to new;
    set newname for clone datafile 67 to new;
    set newname for clone datafile 68 to new;
    set newname for clone datafile 69 to new;
    set newname for clone datafile 70 to new;
    set newname for clone datafile 71 to new;
    set newname for clone datafile 72 to new;
    restore
    check readonly
    clone database
    executing Memory Script
    executing command: SET until clause
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    Starting restore at 05-JAN-11
    channel aux2: starting datafile backupset restore
    channel aux2: specifying datafile(s) to restore from backup set
    restoring datafile 00003 to +LASR
    restoring datafile 00004 to +LASR
    restoring datafile 00006 to +LASR
    restoring datafile 00007 to +LASR
    restoring datafile 00025 to +LASR
    restoring datafile 00045 to +LASR
    restoring datafile 00046 to +LASR
    restoring datafile 00049 to +LASR
    restoring datafile 00051 to +LASR
    restoring datafile 00053 to +LASR
    restoring datafile 00054 to +LASR
    restoring datafile 00058 to +LASR
    restoring datafile 00060 to +LASR
    restoring datafile 00062 to +LASR
    restoring datafile 00064 to +LASR
    restoring datafile 00066 to +LASR
    restoring datafile 00068 to +LASR
    restoring datafile 00070 to +LASR
    restoring datafile 00071 to +LASR
    restoring datafile 00072 to +LASR
    channel aux2: reading from backup piece /ora_export/lasrx/15m16kuo_1_1
    channel aux1: starting datafile backupset restore
    channel aux1: specifying datafile(s) to restore from backup set
    restoring datafile 00001 to +LASR
    restoring datafile 00002 to +LASR
    restoring datafile 00005 to +LASR
    restoring datafile 00026 to +LASR
    restoring datafile 00038 to +LASR
    restoring datafile 00043 to +LASR
    restoring datafile 00044 to +LASR
    restoring datafile 00047 to +LASR
    restoring datafile 00048 to +LASR
    restoring datafile 00050 to +LASR
    restoring datafile 00052 to +LASR
    restoring datafile 00055 to +LASR
    restoring datafile 00056 to +LASR
    restoring datafile 00057 to +LASR
    restoring datafile 00059 to +LASR
    restoring datafile 00061 to +LASR
    restoring datafile 00063 to +LASR
    restoring datafile 00065 to +LASR
    restoring datafile 00067 to +LASR
    restoring datafile 00069 to +LASR
    channel aux1: reading from backup piece /ora_export/lasrx/16m16kuo_1_1
    channel aux1: restored backup piece 1
    piece handle=/ora_export/lasrx/16m16kuo_1_1 tag=TAG20110103T144231
    channel aux1: restore complete, elapsed time: 00:18:55
    channel aux2: restored backup piece 1
    piece handle=/ora_export/lasrx/15m16kuo_1_1 tag=TAG20110103T144231
    channel aux2: restore complete, elapsed time: 00:21:20
    Finished restore at 05-JAN-11
    sql statement: CREATE CONTROLFILE REUSE SET DATABASE "LASRX" RESETLOGS ARCHIVELOG
    MAXLOGFILES 16
    MAXLOGMEMBERS 2
    MAXDATAFILES 72
    MAXINSTANCES 1
    MAXLOGHISTORY 7303
    LOGFILE
    GROUP 1 SIZE 20 M ,
    GROUP 2 SIZE 20 M ,
    GROUP 3 SIZE 20 M
    DATAFILE
    '+LASR/lasrx/datafile/system.331.739646133'
    CHARACTER SET WE8ISO8859P1
    released channel: aux1
    released channel: aux2
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 01/05/2011 17:36:50
    RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
    ORA-01276: Cannot add file +LASR/lasrx/controlfile/current.332.739640887.  File has an Oracle Managed Files file name.
    =======================================================================
    PFILE
    ====
    *.aq_tm_processes=2
    *.audit_file_dest='/10g/app/oracle/admin/lasrx/adump'
    *.background_dump_dest='/10g/app/oracle/admin/lasrx/bdump'
    *.compatible='10.2.0'
    *.core_dump_dest='/10g/app/oracle/admin/lasrx/cdump'
    *.control_files='+LASR','+FLASH'
    *.db_block_size=8192
    *.db_cache_size=318767104
    *.db_create_file_dest='+LASR'
    *.db_domain=''
    *.db_file_multiblock_read_count=8
    *.db_files=500
    *.db_name='LASRX'
    *.db_recovery_file_dest='+FLASH'
    *.db_recovery_file_dest_size=5120M
    *.dml_locks=5000
    *.job_queue_processes=0
    *.local_listener='(ADDRESS=(PROTOCOL=TCP)(HOST=hct431oractd002.mfia.state.mi.us)(PORT=1524))'
    *.log_archive_dest_1='LOCATION=+FLASH/LASRX'
    *.log_archive_format='%t_%s_%r.arc'
    *.log_buffer=30551040
    *.log_checkpoint_interval=100000
    *.log_checkpoint_timeout=72000
    *.log_checkpoints_to_alert=TRUE
    *.max_dump_file_size='20480'
    *.nls_comp='binary'
    *.nls_date_format='DD-MON-RR'
    *.nls_language='american'
    *.nls_length_semantics='BYTE'
    *.nls_numeric_characters='.,'
    *.nls_sort='binary'
    *.nls_territory='america'
    *.O7_DICTIONARY_ACCESSIBILITY=FALSE
    *.open_cursors=500
    *.open_links=20
    *.parallel_max_servers=12
    *.parallel_min_servers=0
    *.pga_aggregate_target=681574400
    *.processes=800
    *.query_rewrite_enabled='TRUE'
    *.remote_login_passwordfile='EXCLUSIVE'
    *.resource_manager_plan=''
    *.session_cached_cursors=100
    =============================

  • Error message on startup  when non Administrator user

    I have installed Premiere Pro CS4 on MAC OS X and run it successfully whilst logged in as Administrator. However when I log in with a standard user account, I get the following message when starting the application:
    "The application Premiere Pro quit unexpectedly. Mac OS X and other applications are not affected. Click relaunch to launch the application again. Click report to see more details or send a report to Apple."
    I'm assuming this may be a permissions problem, but haven't a clue where to look first. If anyone can throw some light on this matter, it would be very much appreciated.
    Tried giving 'everyone' full access to the Premiere folder but that didn't work.
    Kind Regards
    Ian

    Dr.Asian wrote:Yes i just tried the steps in the article and there was no change. .. I ran "sudo pacman -S b43-fwcutter" and "sudo pacman -S b43-fwcutter wget" restarted the PC and got the same message.
    But, why did you not install https://aur.archlinux.org/packages/b43-firmware/ in accordance with the wiki article I linked for your convenience?

  • Error while loading the Repository database using OAIIMPORT

    We are building a test oai environment I am trying to load the repository with the export dump from our production oai using the OAIIMPORT script.
    I get the following error message:
    Deleting all tables, indexes, and logs ...
    Executing: sqlplus system/[email protected] @sql/deinstall_schema
    SQL*Plus: Release 9.0.1.4.0 - Production on Wed Aug 18 15:04:50 2004
    (c) Copyright 2001 Oracle Corporation. All rights reserved.
    Connected to:
    Oracle9i Enterprise Edition Release 9.0.1.4.0 - Production
    With the Partitioning option
    JServer Release 9.0.1.4.0 - Production
    DROP USER oaihub902 CASCADE
    ERROR at line 1:
    ORA-01940: cannot drop a user that is currently connected
    Disconnected from Oracle9i Enterprise Edition Release 9.0.1.4.0 - Production
    With the Partitioning option
    JServer Release 9.0.1.4.0 - Production
    Recreating user ...
    Executing: sqlplus system/[email protected] @sql/hub1 oaihub902
    SQL*Plus: Release 9.0.1.4.0 - Production on Wed Aug 18 15:04:50 2004
    (c) Copyright 2001 Oracle Corporation. All rights reserved.
    Connected to:
    Oracle9i Enterprise Edition Release 9.0.1.4.0 - Production
    With the Partitioning option
    JServer Release 9.0.1.4.0 - Production
    DOC>** hub1.sql
    DOC>** Modified 11/14/2001 Arvind : Commented Out excessive priviledge from oaihub user
    DOC>** Modified 01/03/2002 Arvind : Added Parameter for oaihub user password
    DOC>** CREATE user oaihub902 and assign table space.
    DOC>*/
    old 1: CREATE USER oaihub902 IDENTIFIED BY &1 DEFAULT TABLESPACE USERS PROFILE DEFAULT ACCOUNT UNLOCK
    new 1: CREATE USER oaihub902 IDENTIFIED BY oaihub902 DEFAULT TABLESPACE USERS PROFILE DEFAULT ACCOUNT UNLOCK
    CREATE USER oaihub902 IDENTIFIED BY oaihub902 DEFAULT TABLESPACE USERS PROFILE DEFAULT ACCOUNT UNLOCK
    ERROR at line 1:
    ORA-01920: user name 'OAIHUB902' conflicts with another user or role name
    User altered.
    User altered.
    Grant succeeded.
    Grant succeeded.
    DOC>** Grant privileges TO user oaihub902.
    DOC>*/
    Grant succeeded.
    Grant succeeded.
    Grant succeeded.
    Grant succeeded.
    Grant succeeded.
    Grant succeeded.
    Grant succeeded.
    Grant succeeded.
    Grant succeeded.
    Grant succeeded.
    Grant succeeded.
    Disconnected from Oracle9i Enterprise Edition Release 9.0.1.4.0 - Production
    With the Partitioning option
    JServer Release 9.0.1.4.0 - Production
    Importing metadata ...
    Executing: imp system/[email protected] fromuser=oai touser=oaihub902 commit=y file=uranus_aug04_exp.dmp
    Executing: sqlplus oaihub902/[email protected] @sql/post_import
    SQL*Plus: Release 9.0.1.4.0 - Production on Wed Aug 18 15:04:52 2004
    (c) Copyright 2001 Oracle Corporation. All rights reserved.
    Connected to:
    Oracle9i Enterprise Edition Release 9.0.1.4.0 - Production
    With the Partitioning option
    JServer Release 9.0.1.4.0 - Production
    DOC> ** Create Tables
    DOC> */
    DOC> ** Workflow Tables and Sequences
    DOC> */
    CREATE TABLE lookupid (id NUMBER(10) NOT NULL
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    CREATE TABLE lookup (tableid NUMBER(10) NOT NULL
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    DOC> ** Component Info Tables and Sequences
    DOC> */
    CREATE TABLE ComponentInfo (name VARCHAR2(256) NOT NULL,
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    CREATE TABLE ComponentInfoValue (seqnum NUMBER
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    CREATE TABLE AppIDTable (appid     NUMBER
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    CREATE TABLE RepoIDTable (repoid NUMBER
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    CREATE TABLE MessageInfoIDTable (messageinfoid NUMBER
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    DOC> ** Correlation
    DOC> */
    CREATE TABLE msg_correlation ( messageinfoid     NUMBER,
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    DOC> ** Tracking and Status Tables
    DOC> */
    CREATE TABLE MessageStatusTable ( SenderApp     NUMBER,
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    DOC> ** Error Table and resubmission AQ
    DOC> */
    CREATE TABLE oai_agent_error ( errorID     NUMBER
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    DOC> ** Create Views
    DOC> */
    CREATE VIEW lcoview as
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    CREATE VIEW eventview as
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    CREATE VIEW eventlcoview as
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    CREATE VIEW emdview as
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    CREATE VIEW dsoview as
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    DOC> ** Create Queues
    DOC> */
    DOC> ** Hub Queue
    DOC> */
    Procedure created.
    PL/SQL procedure successfully completed.
    DOC> ** Error Queue
    DOC> */
    CREATE type oai_agent_error_type as object ( errorID     NUMBER,
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    DECLARE
    ERROR at line 1:
    ORA-24001: cannot create QUEUE_TABLE, OAIHUB902.OAI_AGENT_ERROR_OBJQTAB already
    exists
    ORA-06512: at "SYS.DBMS_AQADM_SYS", line 2284
    ORA-06512: at "SYS.DBMS_AQADM", line 56
    ORA-06512: at line 3
    PL/SQL procedure successfully completed.
    DOC> ** Create Sequences
    DOC> */
    SELECT * FROM SEQUENCE_VALUES;
    ERROR at line 3:
    ORA-06550: line 3, column 18:
    PL/SQL: ORA-00942: table or view does not exist
    ORA-06550: line 3, column 4:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 6, column 44:
    PLS-00364: loop index variable 'SEQ_REC' use is invalid
    ORA-06550: line 6, column 4:
    PL/SQL: Statement ignored
    DROP TABLE SEQUENCE_VALUES
    ERROR at line 1:
    ORA-00942: table or view does not exist
    Disconnected from Oracle9i Enterprise Edition Release 9.0.1.4.0 - Production
    With the Partitioning option
    JServer Release 9.0.1.4.0 - Production
    Any idea why these errors and how to fix this ?
    Thanks in advance
    Devika.

    Devika,
    You have to stop all your adapters, your repository, close all IStudio client and stop all sessions connected to this schema before running the oaiimport.
    If you don't do this the oaiimport will not work properly as the script will not be able to drop the user and will try to re-create existing objects.
    Tip : use the following select to list the session using oaihub902 user (and get rid off them)
    select username, count(*)
    from V$session
    where username in ('OAIHUB902')
    group by username
    order by count(*) desc, username
    JL

  • Error while importing the Oracle8i database

    The error message we get is "segmentation fault core dump".
    This error Occurs when i had exported the whole Oracle8i database using system/manager and then trying to import any table from this export file(.dmp). We are using the oracle8i release 8.1.5.0.0 on solaris 2.7. import and export utility also has the same version(8.1.5.0.0). We have given imp_full_database to all the database users. we able to import any table from export file taken for a single user(user-mode).
    null

    Hi,
    it is not astonishing that the error occurs every time you try this create table statement.
    A table with this name already exists. And error -955 tells us exactly this.
    What to do?
    As I do not know if there is data in this table and/or if there are views / other database objects
    using this table, I cannot decide, if dropping this table would be a good idea.
    But what I do not understand is, why during one (?) loading in a clean (?) database this
    table is tried to create more than once. Or was the database you are loading into not clean,
    fresh and empty? Then it will happen that not only this table, but some others will result in an error
    because they exist already.
    Elke

  • Error while sending the mail( Database error for ADDR_PERS_COMP_COMM_GE)

    Hello guys,
    I am facing the error    " Database error for <ADDR_PERS_COMP_COMM_GET> <0> " as a pop-up message.
    below is my program.
    types: BEGIN OF t_p0002,
            pernr type PERSNO,       "Personnel number
            nachn TYPE PAD_NACHN,    "Last Name
            VORNA TYPE PAD_VORNA,    "First Name
            gbdat TYPE gbdat,        "Date of Birth
          END OF t_p0002.
    *******************Data of an object which can be changed**************************************
    data   S_maildata type SODOCCHGI1.
    *******************Text field length 255: texts***********************************************
    data : IT_MAILTXT1 type table of SOLISTI1 ,  "Internal table will contain texts of mail header
           WA_MAILTXT1 TYPE SOLISTI1,
           IT_MAILTXT2 type table of SOLISTI1 ,  "Internal table will contain texts of contents in the mail
           WA_MAILTXT2 TYPE SOLISTI1.
    *******************Structure of the API Recipient List*****************************************
    data : IT_MAILREC type table of SOMLRECI1,
           WA_MAILREC TYPE SOMLRECI1.
    DATA : it_pa0002 TYPE TABLE OF t_p0002,
           wa_pa0002 type t_p0002.
    data  Header_text type c LENGTH 15.
    CONSTANTS  content_text type c LENGTH 35 VALUE 'Tomorrow is the birthday of'.
    *******************Event start of selection***************************************************
    start-of-selection.
      PERFORM get_birthdate.   " will give birthday details
      PERFORM document_details. " will give text and mail details
    *&      Form  get_birthdate
          text : subroutine to get employee birthdate details
    form get_birthdate.
      data : l_date like sy-datum.
      refresh it_pa0002.
      l_date = sy-datum + 1.
      SELECT pernr nachn vorna gbdat
        from pa0002
        INTO TABLE it_pa0002
        where gbdat = '19650302'.
    ENDFORM.                    "get_birthdate
    *&      Form  document_details
          text : subroutine to get texts and mail details.
    FORM document_details.
      CLEAR: Header_text,
              wa_MAILREC.
      REFRESH  IT_MAILREC.
      S_maildata-obj_name = 'Birthday Reminder'.
      s_maildata-obj_descr = 'Birthday Reminder'.
      s_maildata-obj_langu = sy-langu.
      READ TABLE IT_MAILTXT1 INTO WA_MAILTXT1
      WITH KEY WA_MAILTXT1-line .
      WA_MAILTXT1-line = 'Birthday Reminder'.
      append WA_MAILTXT1 TO IT_MAILTXT1.
      CLEAR WA_MAILTXT1.
      LOOP at it_pa0002 INTO wa_pa0002.
        READ TABLE IT_MAILTXT2 INTO WA_MAILTXT2
         WITH KEY WA_MAILTXT2-line .
        CONCATENATE content_text ' ( ' wa_pa0002-pernr ' ) ' wa_pa0002-nachn wa_pa0002-vorna
        INTO  WA_MAILTXT2 SEPARATED BY ' '.
        append WA_MAILTXT2 TO IT_MAILTXT2.
        CLEAR WA_MAILTXT2.
        CLEAR wa_pa0002.
      ENDLOOP.
       LOOP AT IT_MAILREC INTO WA_MAILREC.
      WA_MAILREC-RECEIVER = 'Any mail id'.
      WA_MAILREC-rec_type = 'U'.
      append WA_MAILREC TO IT_MAILREC.
       ENDLOOP.
    ********************Function Mofule:To Send new Document*****************************************
      CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
      EXPORTING
      document_data = S_maildata
      DOCUMENT_TYPE = 'RAW'
      PUT_IN_OUTBOX = ' '
      COMMIT_WORK = 'X'
    IMPORTING
    SENT_TO_ALL =
    NEW_OBJECT_ID =
      tables
      OBJECT_HEADER = IT_MAILTXT1
      OBJECT_CONTENT = IT_MAILTXT2
    CONTENTS_HEX =
    OBJECT_PARA =
    OBJECT_PARB =
      receivers = IT_MAILREC
       EXCEPTIONS
       TOO_MANY_RECEIVERS = 1
       DOCUMENT_NOT_SENT = 2
       DOCUMENT_TYPE_NOT_EXIST = 3
       OPERATION_NO_AUTHORIZATION = 4
       PARAMETER_ERROR = 5
       X_ERROR = 6
       ENQUEUE_ERROR = 7
       OTHERS = 8
      IF sy-subrc = 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    "document_details
    After I pressed the exit button the program is getting terminated but still this mail is comming to sost transaction code.
    If I will comment the message code which is after sy-subrc the popup will not come and program will work without any interruption.
    Can anybody please solve this problem?

    Resolved

  • Error in mounting the standby database

    Hi All,
    OS:Solaris
    DB:10G
    I am facing the below mentioned error while i am trying to create a standby database on the same server.
    Following are the steps that i have followed for the same.
    1.Checked the connectivity.
    2.Created the pfile for primary DB as mentioned below:
    *.DB_BLOCK_SIZE=8192
    *.OPEN_CURSORS=300
    *.CURSOR_SHARING=FORCE
    *.BACKGROUND_DUMP_DEST='/11g/oradata/admin/ettest/bdump'
    *.CORE_DUMP_DEST='/11g/oradata/admin/ettest/cdump'
    *.USER_DUMP_DEST='/11g/oradata/admin/ettest/udump'
    *.CONTROL_FILES=("/11g/oradata/admin/data/controlfiles/control01.ctl","/11g/oradata/admin/data/controlfiles/control02.ctl")
    *.DB_NAME=ettest
    *.PROCESSES=150
    *.UNDO_MANAGEMENT=AUTO
    *.UNDO_TABLESPACE=undotbs
    *.compatible='10.2.0.1.0'
    *.STANDBY_FILE_MANAGEMENT='AUTO'
    *.LOG_ARCHIVE_DEST_1='Location=/11g/oradata/archives/'
    *.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
    *.DB_FILE_NAME_CONVERT='/11g/oradata/admin/data/datafiles/','/11g/oradata_dr/ettestdr/datafiles/'
    *.LOG_FILE_NAME_CONVERT='/11g/oradata/admin/data/logfiles/','/11g/oradata_dr/ettestdr/redologs/'
    *.STANDBY_ARCHIVE_DEST='/11g/oradata_dr/ettestdr/dr_archives/ettestdr'
    *.LOG_ARCHIVE_DEST_2='SERVICE=ettestdr'
    *.FAL_SERVER='ETTESTDR'
    *.FAL_CLIENT='ETTEST'
    3. Created the pfile for DR:
    *.DB_UNIQUE_NAME=ettestdr
    *.DB_BLOCK_SIZE=8192
    *.OPEN_CURSORS=300
    *.CURSOR_SHARING=FORCE
    *.BACKGROUND_DUMP_DEST='/11g/oradata_dr/ettestdr/admin/bdump'
    *.CORE_DUMP_DEST='/11g/oradata_dr/ettestdr/admin/cdump'
    *.USER_DUMP_DEST='/11g/oradata_dr/ettestdr/admin/udump'
    *.CONTROL_FILES=("/11g/oradata_dr/ettestdr/controlfiles/standbycontrolfile.ctl")
    *.DB_NAME=ettestdr
    *.PROCESSES=150
    *.UNDO_MANAGEMENT=AUTO
    *.UNDO_TABLESPACE=undotbs
    *.compatible='10.2.0.1.0'
    *.FAL_SERVER='ETTEST'
    *.FAL_CLIENT='ETTESTDR'
    *.STANDBY_FILE_MANAGEMENT='AUTO'
    *.LOG_ARCHIVE_DEST_1='Location=/11g/oradata/archives/'
    *.STANDBY_ARCHIVE_DEST='/11g/oradata_dr/ettestdr/dr_archives/ettestdr'
    *.LOG_ARCHIVE_DEST_2='SERVICE=ettestdr'
    *.LOG_ARCHIVE_DEST_STATE_2='DEFER'
    *.DB_FILE_NAME_CONVERT='/11g/oradata_dr/ettestdr/datafiles/','/11g/oradata/admin/data/datafiles/'
    *.LOG_FILE_NAME_CONVERT='/11g/oradata_dr/ettestdr/redologs/','/11g/oradata/admin/data/logfiles/'
    4.In the mean time i have backed up the database and transferd the same on the DR location and then i ahve created the standbycontrolfiel using the command on priamary server with sys login using the command:
    alter databse create standby controlfile as '/path';5.My Primary was up using the said pfile.
    6.I was also able to put my DR in nomount stage using the above pfile
    7.I transfered the controlfile at the appropriate location of the DR server and when i am trying to mount the DR db using:
    alter database mount standby database;I am getting the below mentioned error
    SQL> alter database mount standby database;
    alter database mount standby database
    ERROR at line 1:
    ORA-01103: database name 'ETTEST' in control file is not 'ETTESTDR'
    Kindly suggest...BR
    Sphinx
    Edited by: $phinx19 on Dec 12, 2012 5:29 AM

    Hi,
    You must create pfile for Standby side with parameter DB_UNIQUE_NAME = ettestdr but DB_NAME is same with primary as DB_NAME = ettest.
    *.DB_UNIQUE_NAME=ettestdr
    *.DB_BLOCK_SIZE=8192
    *.OPEN_CURSORS=300
    *.CURSOR_SHARING=FORCE
    *.BACKGROUND_DUMP_DEST='/11g/oradata_dr/ettestdr/admin/bdump'
    *.CORE_DUMP_DEST='/11g/oradata_dr/ettestdr/admin/cdump'
    *.USER_DUMP_DEST='/11g/oradata_dr/ettestdr/admin/udump'
    *.CONTROL_FILES=("/11g/oradata_dr/ettestdr/controlfiles/standbycontrolfile.ctl")
    *.DB_NAME=ettest
    *.PROCESSES=150
    *.UNDO_MANAGEMENT=AUTO
    *.UNDO_TABLESPACE=undotbs
    *.compatible='10.2.0.1.0'
    *.FAL_SERVER='ETTEST'
    *.FAL_CLIENT='ETTESTDR'
    *.STANDBY_FILE_MANAGEMENT='AUTO'
    *.LOG_ARCHIVE_DEST_1='Location=/11g/oradata/archives/'
    *.STANDBY_ARCHIVE_DEST='/11g/oradata_dr/ettestdr/dr_archives/ettestdr'
    *.LOG_ARCHIVE_DEST_2='SERVICE=ettest'
    *.LOG_ARCHIVE_DEST_STATE_2='DEFER'
    *.DB_FILE_NAME_CONVERT='/11g/oradata_dr/ettestdr/datafiles/','/11g/oradata/admin/data/datafiles/'
    *.LOG_FILE_NAME_CONVERT='/11g/oradata_dr/ettestdr/redologs/','/11g/oradata/admin/data/logfiles/' And in pfile for standby *.LOG_ARCHIVE_DEST_2='SERVICE=ettest' - after switchover logs transport to primary (ettest)
    Regards
    Mahir M. Quluzade
    www.mahir-quluzade.com
    Edited by: Mahir M. Quluzade on Dec 12, 2012 5:44 PM

  • Error connecting to the "sample database"

    I am a newbie going through the ColdFusion Help. I am at
    "Getting Started with Dreamweaver > Tutorial: Developing a Web
    Application > Define a Record Set". When I test the record set
    (step 10), I am getting
    this error, which says
    there is a syntax error in the FROM clause.
    The SQL statement looks like this:
    SELECT *
    FROM C:\Program Files\Macromedia\Dreamweaver
    8\Tutorial_assets\cafe_townsend\data\tutorial.COMMENTS
    ORDER BY LAST_NAME ASC
    where the .mdb file is located in its default location:
    C:\Program Files\Macromedia\Dreamweaver
    8\Tutorial_assets\cafe_townsend\data\tutorial.mdb
    Can anyone help me?? Why are these basic tutorials messing up
    for me!?!?!??

    Do
    SELECT *
    FROM [C:\Program Files\Macromedia\Dreamweaver
    8\Tutorial_assets\cafe_townsend\data\tutorial.mdb].tableName
    ORDER BY LAST_NAME ASC

  • Trying to install Elements 11 on a new iMac but keep getting the the Installation Status error "Inconsistency in the installer database"

    Tried installing same the DVD on a new iMac but the above error keeps popping up all the time.
    Tried loading the same DVD on a macbook pro laptop all works fine, don't require the program on the macbook pro but why doesn't it install on the brand new iMac?
    Both are running OS X Yosemite

    Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 3 products

Maybe you are looking for

  • Final cut express versus Adobe Premiere Pro 1.5

    Hi Resently I bought a Mac Pro and Final cut express. In the past I used Premiere Pro 1.5. When my project was finisched i wrote it back to tape as a Microsoft DV avi file. Is it possible to create a Microsoft DV avi file in Final Cut Express ? I'll

  • Import Po duty  change

    Hi Experts,            One Import PO Duty amount was entered wrong and part qty goods are in warded in the same,whether we can make changes and correct the duty amount in the same. We tried correcting and amending the PO with the correct duty value b

  • Its weird!!! Can anyone explain this?

    Oracle Version -10.2.0.3 Running on Windows 2003 Server Flashback recovery area is defined as -C:\oracle\product\10.2.0\flash_recovery_area (Currently FRA is only used for storing archivelogs) RMAN Backups are going on -C:\Backups\ I am running Night

  • WP-300 Reset

    Hello, I`ve got a Problem with my WP-300. If I press the Power button the headphones doesn´t turn on. There is neither a sound nor a light on the right side.Pairing is also not possible. The battery is charged full and the led on the left side is gre

  • Generating the IDocs for some particular segments only......

    Hi Gurus, I have activates the change Pointers for generating the IDocs whenever the master dtaa is changed. Is there any technique so that I can recive the IDocs containing only those segment's data which is relevant for me. Abhi....