Error in between r3 and Xi

Hi,
In a Idoc to file scenerio, if the data was successfully posted from R3 and the we02 status was succesfully sent, and the data cannot be seen in idx5 in XI, the communication channel is up, and showing no errors, is there any checking/ monitering / trouble shooting that i can do? SM59  abap connections are OK!!
Regards
Arnab

ususally put the trace (sxmb_adm / Integration Engine Configuration / specific configuration / runtime / logging to 3 at test system, to 0 or 1 at productive system, coz you want to analyse errors at test and good performance at p system.
Let the delete / archive job run every night (or when ever you have low traffic) and customize the time how long a message should remain in the DB at sxmb_adm / Integration Engine Configuration / specific configuration / deletion resp archive.
If you want to be able to find out later anything about old message, go for archive. Look to the archives from sxmb_moni / archived xml messages.
How long should messages remain in DB?
Go to sxmb_moni / persistenz layer analysis, where you can see the current fill level of your DB. If it is nearly empty, you can increase the days in sxmb_adm, if nearly full than you need a lower intervall.
Usually the messages at test remain longer time coz there is no space problem - not so much traffic.
check this link even :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50

Similar Messages

  • Error: Branch between 76249 and 109399 around line 0 exceeds 32K span in VC

    Hi All,
    When i deploy the model. I am getting the following problem. Can u please tell me what is the route cause.
    Error in compiling Flex application: Error: Branch between 76249 and 109399 around line 0 exceeds 32K span. If possible, please refactor this component.
    Error: Branch between 76249 and 109399 around line 0 exceeds 32K span.
    Failed to compile AAD1T5.mxml
    Regards
    Vijay

    Doing the following may help:
    1.Divide problematic iViews into a number of nested iViews.
    2.Optimize each model to reduce the number of elements that it
      contains:
      a.Reduce the number of signals by merging signals of the same name.
      b.When your application updates forms with read-only fields, use
        expression boxes and a data store instead of signals.
      c.Minimize the use of animations in your models, including form
        sliding and chart animation effects
      d.Use a data store to store variables, instead of invisible forms.
        To display messages, use a simple text rather than a static dynamic
        expression.
    3.For on-the-spot, temporary workarounds, you can try dragging an empty
      layer onto the Design board. This sometimes solves the problem ad
      hoc, but is not recommended as a best practice.

  • Error: Interlock between production and Sales Department .

    Hi All,
    Error: Interlock between production and Sales Department . Please give me solution of this .
    Regads,
    SAP SD user

    Hi,
    There are lot of integrations between PP&SD
    naming few MTO,SOP process,batch management......

  • Flie error working between FCP and Livetype

    I create my desired clip in Livetype and save project. I click and hold Livetype Icon in the Canvas window and press Command + Tab and toggle over to FCP 4. However, when I try to drop the Livetype Icon into my Browser I get Unknown File error and if I drop Icon onto FCP Timeline absolutely nothing happens.
    Does anyone have any ideas on why this is happening???
    Thanks.

    Maybe they have fixed some of the problems, but this workflow was the root of a number of people loosing most of their project files. Somewhere along the line FCP would think everything was deleted or outdated render files and would delete the whole bunch. They were not in the trash... they were just GONE.
    x
    Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
    Also, don't forget to mark the thread Answered when you get enough information to close the thread.

  • CKM3 Reports Error Difference between Ending and Beginning Inventories.

    Dear All I,
    have Question about CKM3 report.
    I had a different amounts  for ending inventory for may and  beginnig inventory  for june for same material.
    Ending inventory for May is 3.665.076,45 but for same material beginnig inventory is 3.661.441,28.
    Could you please help me if you have any information or comment on this subject.
    Best Regards

    Hi Ajeesh,
    When I executed the F.5D Balance Sheet Adjustment program, it gave 2 documents which have errors. How to find out the exact issue in these 2 documents. Kindly guide me to proceed further.
    Thanx
    Rosalyn

  • Sync error - connection between handheld and desktop can't be established

    My sync quit working.  I synched successfully a couple days ago, then updated my software and changed my conduit to 'Outlook' based on a message I saw here (trying to get my contacts and calendar into outlook so I can sync into a new Blackberry Storm).  Since then, I can't sync at all.
    I have tried everything I can think of.  I have turned off/on my PC, soft reset my Treo 650, tried to reload the desktop software from my original install disk from Verizon but that didn't work - I got the following error message while it was removing the files "ERROR 1316 A network error occured while attempting to read from the file C:\windows\installer\palmone.msi"
    So I downloaded the software from this site as a 'repair'.  It didn't fix anything.
    Silly question though, could this be because the phone is turned off now?  Even though I want to still use it as a PDA only?  Please help, I'm not a techie...
    thanks
    Desktop PC is Windows XL
    Verizon Treo 650
    Post relates to: Treo 650 (Verizon)
    This question was solved.
    View Solution.

    since the data is on the device I would suggest uninstalling the palm software, deleting the Palm folder under Program files then reinstalling. 
    Post relates to: None

  • Error connection between vwlc and AP

    Hi 
    I am new to Wireless network and have been tasked with setting v WLC Cisco and AIR-CAP702I-I-K9. I followed some guides to configure the WLC, but however the APs are not joining the controller. with console cable connected to the AP i get the following;
    *Mar  1 00:01:02.879: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Mar  1 00:01:02.883: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_17:1d:20'running version 7.3.101.0 is rejected.
    *Mar  1 00:01:02.883: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
    *Mar  1 00:01:02.883: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
    *Mar  1 00:01:02.883: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Mar  1 00:01:02.883: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.0.0.1
    *Mar  1 00:01:02.887: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_17:1d:20'running version 7.3.101.0 is rejected.
    *Mar  1 00:01:02.887: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
    *Mar  1 00:01:02.887: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    Please can you help me it is very urgent 

    hi 
    Outputs are :
    (Cisco Controller) >show sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.3.101.0
    RTOS Version..................................... 7.3.101.0
    Bootloader Version............................... 7.3.101.0
    Emergency Image Version.......................... 7.3.101.0
    Build Type....................................... DATA + WPS
    System Name...................................... Cisco_17:1d:20
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1631
    IP Address....................................... 10.0.0.1
    System Up Time................................... 1 days 3 hrs 59 mins 19 secs
    System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin, Rome, Vienna
    Configured Country............................... TN  - Tunisia
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    --More-- or (q)uit
    Number of WLANs.................................. 1
    Number of Active Clients......................... 0
    Burned-in MAC Address............................ 00:0C:29:17:1D:20
    Maximum number of APs supported.................. 200
    (Cisco Controller) >show time
    Time............................................. Fri Dec 12 15:50:48 2014
    Timezone delta................................... 0:0
    Timezone location................................ (GMT +1:00) Amsterdam, Berlin, Rome, Vienna
    NTP Servers
        NTP Polling Interval.........................     86400
         Index     NTP Key Index     NTP Server      NTP Msg Auth Status
    AP7c69.f670.d1a9#show version
    Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(25e)JA1, RELEASE                                                                                         SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Wed 30-May-12 04:06 by prod_rel_team
    ROM: Bootstrap program is C1140 boot loader
    BOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(23c)JA6, RELEASE SOFTWARE                                                                                         (fc1)
    AP7c69.f670.d1a9 uptime is 15 minutes
    System returned to ROM by power-on
    System image file is "flash:/c1140-k9w8-mx.124-25e.JA1/c1140-k9w8-mx.124-25e.JA1                                                                                        "
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-LAP1141N-E-K9    (PowerPC405ex) processor (revision B0) with 65526K/65                                                                                        536K bytes of memory.
    Processor board ID FCZ1743P23U
    PowerPC405ex CPU at 586Mhz, revision number 0x147E
    Last reset from power-on
    LWAPP image version 7.2.110.0
    1 Gigabit Ethernet interface
    1 802.11 Radio(s)
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 7C:69:F6:70:D1:A9
    Part Number                          : 73-12836-06
    PCA Assembly Number                  : 800-33767-06
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC172964DZ
    Top Assembly Part Number             : 800-33776-05
    Top Assembly Serial Number           : FCZ1743P23U
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-LAP1141N-E-K9
    Configuration register is 0xF
    Thanks 

  • SPP Error - No valid transportation lane between Supplier and LOC1

    Hi
    While running the EOQ and SFT planning service, we get the following error
    "No valid transportation lane between Supplier and LOC1". LOC1 is the entry location for our BOD.
    We have not created any procurement relationships as we are working on a standalone SCM trialbox.
    Appreciate any help/suggestions to resolve this issue.
    Thanks & Best Regds
    Mitesh

    Hi Mitesh,
    You need to have valid transportation lanes from the supplier. Maintain it manually. If I remember correctly it is possible to have External Procurement Relationships in APO only (type 4) and not just contracts, purchasing inforecords or scheduling agreements CIFed from ECC.
    Hope this helps.
    Thanks,
    Somnath

  • Errors when saving contacts locally and syncing them between MacBook and iCloud

    Last night I detected that the synchronisation of contacts between my MacBookPro (Yosemite, 13" Retina, late 2013) and iCloud is no longer working. Sync between iCloud and iOS devices (with iOS 8.1) works fine.
    The problem effects the exchange of information from MBP to iCloud as well as the other way around. However, the issues are slightly different.
    No matter what changes (changing existing contacts, creating new ones or creating/changing groups) I do directly in iCloud (which I usually don't do – I was just testing), none of them get synced to my MBP (though they do sync to all iOS devices).
    If I do work on my MBP the situation is a bit different:
    If I change any existing contact, those changes are not synced.
    If I create a new contact in the "all contacts" group, it syncs to iCloud. If I make changes to that newly created contact, they are again not synced.
    If I create a new contact in any other group, the contact does not sync.
    If I create a new group, that group is displayed in iCloud as "new group", i.e. the name I gave it is lost on the way... If I add contacts to this group (again on the MPB), they do not sync.
    If I create a new group using the option "create group from selected contacts" those contacts are synced to iCloud but the name of the group is again only "new group". Contacts added later to that group also don't sync.
    Worst of all, everything that does not sync to iCloud, is lost once I close the Contacts app, meaning this information is not even stored on my MPB. OS X does not display any error messages. However, looking into the console, I found this message repeatedly whenever I was making changes to contacts etc (not only upon closing the app):
    21.10.14 17:12:46,786 Contacts[532]: Error saving address book: Error Domain=NSCocoaErrorDomain Code=1560 "Bei der Überprüfung sind mehrere Fehler aufgetreten." [TRANSLATION: "Multiple errors occurred during verification"] UserInfo=0x600002e75500 {NSDetailedErrors=(
        "Error Domain=NSCocoaErrorDomain Code=1570 \"originalLine ist ein erforderlicher Wert.\" [TRANSLATION: "originalLine is a required value"] UserInfo=0x600003072180 {NSValidationErrorKey=originalLine, NSLocalizedDescription=originalLine ist ein erforderlicher Wert., [TRANSLATION: NSLocalizedDescription=originalLine is a required value.] NSValidationErrorObject=<NSManagedObject: 0x600000ab6ec0> (entity: ABCDUnknownProperty; id: 0x60000102b9e0 <x-coredata:///ABCDUnknownProperty/tFFBA3874-332E-45E1-AD9D-C743B61BD9148226> ; data: {\n    originalLine = nil;\n    owner = \"0x56b4002ab <x-coredata://606A6059-A9DE-42A2-91C2-BBCDADB20C77/ABCDContact/p5549>\";\n    propertyName = \"X-MS-OL-DESIGN\";\n})}",
        "Error Domain=NSCocoaErrorDomain Code=1570 \"originalLine ist ein erforderlicher Wert.\" [TRANSLATION: "originalLine is a required value"] UserInfo=0x600003462f40 {NSValidationErrorKey=originalLine, NSLocalizedDescription=originalLine ist ein erforderlicher Wert., [TRANSLATION: NSLocalizedDescription=originalLine is a required value.] NSValidationErrorObject=<NSManagedObject: 0x6000006bede0> (entity: ABCDUnknownProperty; id: 0x600000c3d300 <x-coredata:///ABCDUnknownProperty/tFFBA3874-332E-45E1-AD9D-C743B61BD9148152> ; data: {\n    originalLine = nil;\n    owner = \"0x56a0002ab <x-coredata://606A6059-A9DE-42A2-91C2-BBCDADB20C77/ABCDContact/p5544>\";\n    propertyName = \"X-MS-OL-DESIGN\";\n})}"
    21.10.14 17:12:46,788 Contacts[532]: -[ABAddressBook save] failed. (<ABAddressBook: 0x6080020c4130>)
    21.10.14 17:12:46,788 Contacts[532]: [CardDAVPlugin-ERROR] -doSyncWithServer: [syncAddressBook(<ABAddressBook: 0x6080020c4130>) save] FAILED
    Does anyone have an idea how to fix this?
    I am not sure about the relevance of these error messages but I found them as well in the console:
    21.10.14 17:46:36,619 uxipm_ui[745]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.0 instead of 10.10.0. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
    Call location:
    21.10.14 17:46:36,619 uxipm_ui[745]: 0   CarbonCore                          0x00007fff934f2dc3 ___Gestalt_SystemVersion_block_invoke + 113
    21.10.14 17:46:36,620 uxipm_ui[745]: 1   libdispatch.dylib                   0x00007fff92302c13 _dispatch_client_callout + 8
    21.10.14 17:46:36,620 uxipm_ui[745]: 2   libdispatch.dylib                   0x00007fff92302b26 dispatch_once_f + 117
    21.10.14 17:46:36,620 uxipm_ui[745]: 3   CarbonCore                          0x00007fff9349b4da _Gestalt_SystemVersion + 987
    21.10.14 17:46:36,620 uxipm_ui[745]: 4   CarbonCore                          0x00007fff9349b0c7 Gestalt + 144
    21.10.14 17:46:36,620 uxipm_ui[745]: 5   QtCore                              0x000000010c089496 _ZN9QInternal16registerCallbackENS_8CallbackEPFbPPvE + 194
    21.10.14 17:46:36,620 uxipm_ui[745]: 6   ???                                 0x00007fff64845ceb 0x0 + 140734879784171
    And also this one:
    21.10.14 17:46:35,098 CoreServicesUIAgent[322]: unexpected message <OS_xpc_error: <error: 0x7fff79579c60> { count = 1, contents =
      "XPCErrorDescription" => <string: 0x7fff79579f70> { length = 18, contents = "Connection invalid" }
    }>
    And this one:
    21.10.14 17:42:42,115 com.apple.iCloudHelper[737]: objc[737]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
    21.10.14 17:42:42,121 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    I have tried the troubleshooting listed here: Get help using iCloud Contacts (i.e. disabled and reenabled the sycn through iCloud in Preferences > iCloud and checked the login information etc)
    And I also do not exceed any of the limits for contacts listed here: iCloud: Limits for Contacts, Calendars, Reminders, and Bookmarks
    Any help is greatly appreciated!

    I don't know if this is applicable for you, but this solved it for me.
    My initial situation was the following, Ipad, Iphone and iMac where syncing well. But not my Macbook Pro. So I did this Get help using iCloud Contacts - Apple Support and this Sync Services: Advanced troubleshooting for contact and calendar syncing - Apple Support . As result all my contacts, even the view I had where gone on my macbook. I tried rebooting and restartting but nothing helped.
    Then I did the following. I backuped all the cards from contacts on my imac (by moving them into a folder) and backuped them by export as archive.
    Afterwards I disconnected from icloud on my imac, then reconected and deleted all contacts from the addressbook. I double checked if they where gone on icloud.com too. Afterwards I just moved them back from the folder to the address book. again double checked on icloud.com and the my macbook started syncing properly.
    Which of the things I finally solved it, I don't know for sure. But I assume it was the one with deleting and restoring everything on another machine.

  • Regarding the error ORA-01841: (full) year must be between -4713 and +9999,

    The issue is the code is not inserting the good records into the MIE table. This is becasue of the error 'OtherError GFSTM_INS_SNURK_NEW_TABLES_PA.gfstm_ins_asn_journal_pr:ORA-01841: (full) year must be between -4713 and +9999, and not be 0' This error is throwing out because of space issue in dt_asn_shipped.
    My requirement is to log error if any if not get the next record in the loop and insert it in the table if it has no error. The issue is good records are not getting inserted. The snurk_cmms_crct018_asn_journl in the cursor is a synonym which uses dblionk to connect to the remote db. The dt_asn_shipped data type is char(6) and the format is YYMMDD.
    declare
    CURSOR cur_asn_journal IS
    SELECT NVL(TRIM(cd_asn_plant),' ') cd_asn_plant,
         NVL(TRIM(no_journal),0) no_journal,
    NVL(TRIM(cd_ship_from),' ') cd_ship_from,
         TRIM(no_asn) no_asn,
    DECODE(LENGTH(dt_asn_shipped),6, to_date(to_char(to_date(trim(dt_asn_shipped),'YYMMDD'),
    'DD-MON-YY'),'DD-MON-YY'), '') dt_asn_shipped,
    TRIM(dt_processed) dt_processed,
    TRIM(in_manual) in_manual,
         TRIM(ts_last_update) ts_last_update     
    FROM snurk_cmms_crct018_asn_journl;
    BEGIN
    FOR l_rec_asn_journal IN cur_asn_journal LOOP
    BEGIN
    INSERT INTO gfstmie_st_cmms_asn_journal
    gsdb_site_code ,
    journal_num,
    gsdb_site_from_code,
    adv_shipping_notice_cnum,
    adv_sn_shipping_date,
    processed_date,
    manual_in_code,
    cmms_last_update_cdate,
    create_userid,
    create_dts,
    update_userid,
    update_dts
    ) VALUES
    l_rec_asn_journal.cd_asn_plant,
    l_rec_asn_journal.no_journal,
    l_rec_asn_journal.cd_ship_from,
    l_rec_asn_journal.no_asn,
    l_rec_asn_journal.dt_asn_shipped,
    l_rec_asn_journal.dt_processed,
    l_rec_asn_journal.in_manual,
    l_rec_asn_journal.ts_last_update,
    g_con_user_id,
         l_dts_current_gmt,
    g_con_user_id,
    l_dts_current_gmt
    EXCEPTION
    WHEN OTHERS THEN
    dbms_output.put_line('l_num_exception_pt_7');
    --To assign value to error attributes
    l_str_email_body := GFSTU_MSG_CONTEXT_STACKER_PA.gfstu_add_msg_context_fn(
    SQLERRM || l_str_process_track,
    g_con_package_name || l_con_proc_name,
    g_con_string_null);
    l_rec_apm_error_attributes.job_run_sakey := l_num_job_run_id;
    l_rec_apm_error_attributes.proj_acronym_code := GFSTM_PARM_SPECIFICATION_PA.g_con_proj_acronym_code_ta;           
    l_rec_apm_error_attributes.module_code := l_con_module_code;
    l_rec_apm_error_attributes.notes_text := l_str_email_body;
    l_rec_apm_error_attributes.msg_id := GFSTM_PARM_SPECIFICATION_PA.g_con_msg_id_invalid_date;
    --Calling procedure to log and notify subscribers of transaction
    --related errors and informational messages
    GFSTM_COMMON_UTL_PA.gfstm_log_message_pr(
    SUBSTR(l_str_email_body,1,2000),
    g_con_string_null,
    g_con_string_null,
    SUBSTR(l_str_email_body,1,2000),
    l_rec_apm_error_attributes,
    g_con_string_null,
    l_num_wait_time,
    l_num_wait_interval_time,
    l_str_msg_action_code,
    l_num_oracle_error_code,
    l_str_oracle_msg,
    l_num_return_code,
    l_num_status);
    END;
    END LOOP;
    WHEN OTHERS THEN
    DBMS_OUTPUT.PUT_LINE('l_num_exception_pt_12');
    DBMS_OUTPUT.PUT_LINE('l_num_exception_pt_2 '||l_str_procg_mode_code);
    --Rollback uncommitted transactions
    ROLLBACK;
    --Assigning failure status
    o_num_status := g_con_status_failure;
    --Assigning procedure end time in GMT
    l_dts_end_time := GFSTU_DATETIME_UTILITIES_PA.gfstu_to_gmt_fn;
    --To assign value to error attributes
    l_str_email_body := GFSTU_MSG_CONTEXT_STACKER_PA.gfstu_add_msg_context_fn(
    SQLERRM || l_str_process_track,
    g_con_package_name || l_con_proc_name,
    g_con_string_null);
    l_rec_apm_error_attributes.job_run_sakey := l_num_job_run_id;
    l_rec_apm_error_attributes.proj_acronym_code := GFSTM_PARM_SPECIFICATION_PA.g_con_proj_acronym_code_ta;           
    l_rec_apm_error_attributes.module_code := l_con_module_code;
    l_rec_apm_error_attributes.notes_text := l_str_email_body;
    l_rec_apm_error_attributes.msg_id := GFSTM_PARM_SPECIFICATION_PA.g_con_msg_id_oracle;
    --Calling procedure to log and notify subscribers of transaction
    --related errors and informational messages
    GFSTM_COMMON_UTL_PA.gfstm_log_message_pr(
    SUBSTR(l_str_email_body,1,2000),
    g_con_string_null,
    g_con_string_null,
    SUBSTR(l_str_email_body,1,2000),
    l_rec_apm_error_attributes,
    g_con_string_null,
    l_num_wait_time,
    l_num_wait_interval_time,
    l_str_msg_action_code,
    l_num_oracle_error_code,
    l_str_oracle_msg,
    l_num_return_code,
    l_num_status);
    --Calling procedure to update the job status
    GFSTM_COMMON_UTL_PA.gfstm_update_job_status_pr(
    l_num_job_run_id,
    GFSTM_PARM_SPECIFICATION_PA.g_con_process_abort,
    l_dts_end_time,
    g_con_perf_metric_code,
    g_con_zero,
    g_con_n,
    l_num_oracle_error_code,
    l_str_oracle_msg,
    l_num_return_code,
    l_num_status);
    END ;
    Thanks,
    Vinodh

    Hi,
    Could you not have reduced your question to what is relevant?
    You seem to be saying that this is your problem:
    SELECT DECODE ( LENGTH (dt_asn_shipped),
              6,
              TO_DATE ( TO_CHAR ( TO_DATE ( TRIM (dt_asn_shipped), 'YYMMDD'), 'DD-MON-YY'), 'DD-MON-YY'),
             dt_asn_shipped
    FROM   snurk_cmms_crct018_asn_journl;As far as I can see, problem might be that you decode on UNTRIMMED length.
    Also, you could get rid of some the to_date(to_char(to_date), which is nothing more than simply to_date()
    Try something like
    SELECT CASE LENGTH (TRIM (dt_asn_shipped))
             WHEN 6 THEN TO_DATE ( TRIM (dt_asn_shipped), 'YYMMDD')
           END
             dt_asn_shipped
    FROM   snurk_cmms_crct018_asn_journl;Regards
    Peter

  • Error ORA-01841: (full) year must be between -4713 and +9999, and not be 0

    Hi Experts,
    I seem to be getting the error "Error ORA-01841: (full) year must be between -4713 and +9999, and not be 0" when my dates are in the year 2000. Here's my SQL:
    DROP TABLE PER_ALL_ASSIGNMENTS_M_XTERN;
    create table PER_ALL_ASSIGNMENTS_M_XTERN(
    PERSON_NUMBER                    VARCHAR2(30 CHAR),
    ASSIGNMENT_NUMBER VARCHAR2(30 CHAR),
    EFFECTIVE_START_DATE                DATE,
    EFFECTIVE_END_DATE           DATE,
    EFFECTIVE_SEQUENCE           NUMBER(4),
    ASS_ATTRIBUTE_CATEGORY           VARCHAR2(30 CHAR),
    ASS_ATTRIBUTE1 VARCHAR2(150 CHAR),
    ASS_ATTRIBUTE_NUMBER20 NUMBER,
    ASS_ATTRIBUTE_DATE1 DATE,
    ASS_ATTRIBUTE_DATE2 DATE,
    ASS_ATTRIBUTE_DATE3 DATE,
    ASS_ATTRIBUTE_DATE4 DATE,
    ASS_ATTRIBUTE_DATE5 DATE,
    ASS_ATTRIBUTE_DATE6 DATE,
    ASS_ATTRIBUTE_DATE7 DATE,
    ASS_ATTRIBUTE_DATE8 DATE,
    ASS_ATTRIBUTE_DATE9 DATE,
    ASS_ATTRIBUTE_DATE10 DATE,
    ASS_ATTRIBUTE_DATE11 DATE,
    ASS_ATTRIBUTE_DATE12 DATE,
    ASS_ATTRIBUTE_DATE13 DATE,
    ASS_ATTRIBUTE_DATE14 DATE,
    ASS_ATTRIBUTE_DATE15 DATE,
    ASG_INFORMATION_CATEGORY           VARCHAR2(30 CHAR),
    ASG_INFORMATION1 VARCHAR2(150 CHAR),
    ASG_INFORMATION_NUMBER20 NUMBER,
    ASG_INFORMATION_DATE1 DATE,
    ASG_INFORMATION_DATE2 DATE,
    ASG_INFORMATION_DATE3 DATE,
    ASG_INFORMATION_DATE4 DATE,
    ASG_INFORMATION_DATE5 DATE,
    ASG_INFORMATION_DATE6 DATE,
    ASG_INFORMATION_DATE7 DATE,
    ASG_INFORMATION_DATE8 DATE,
    ASG_INFORMATION_DATE9 DATE,
    ASG_INFORMATION_DATE10 DATE,
    ASG_INFORMATION_DATE11 DATE,
    ASG_INFORMATION_DATE12 DATE,
    ASG_INFORMATION_DATE13 DATE,
    ASG_INFORMATION_DATE14 DATE,
    ASG_INFORMATION_DATE15 DATE
    organization external
    ( default directory APPLCP_FILE_DIR
    access parameters
    ( records delimited by newline skip 1
         badfile APPLCP_FILE_DIR:'PER_ALL_ASSIGNMENTS_M_XTERN.bad'
    logfile APPLCP_FILE_DIR:'PER_ALL_ASSIGNMENTS_M_XTERN.log'
    fields terminated by ',' OPTIONALLY ENCLOSED BY '"'
    (PERSON_NUMBER,     
    ASSIGNMENT_NUMBER,
    EFFECTIVE_START_DATE CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    EFFECTIVE_END_DATE CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    EFFECTIVE_SEQUENCE,
    ASS_ATTRIBUTE_CATEGORY,
    ASS_ATTRIBUTE1,
    ASS_ATTRIBUTE_NUMBER20,
    ASS_ATTRIBUTE_DATE1 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE2 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE3 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE4 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE5 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE6 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE7 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE8 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE9 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE10 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE11 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE12 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE13 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE14 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE15 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_CATEGORY,
    ASG_INFORMATION1,
    ASG_INFORMATION_NUMBER20,
    ASG_INFORMATION_DATE1 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE2 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE3 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE4 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE5 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE6 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE7 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE8 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE9 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE10 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE11 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE12 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE13 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE14 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE15 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY"
    location ('PER_ALL_ASSIGNMENTS_M.csv')
    REJECT LIMIT UNLIMITED;
    ...and getting errors when data looks like the following:
    E040101,EE040101,*1-Aug-2000*,31-Dec-4712,1,,NDVC,YES,DE,SFC,N,STIP Plan - Pressure,,,,,,,E040101,,,,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,5,,,,,,,,,,,,31113,31113,31113,31113,31113,31113,,,1-Jan-2012,31-Dec-2012,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    ...error message:
    error processing column EFFECTIVE_START_DATE in row 19 for datafile /u05/dbadir/jmf/incident_logs/PER_ALL_ASSIGNMENTS_M.csv
    ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    Thanks,
    Thai

    Here is a snippet of the bad file data:
    E040110,EE040110,01-Aug-00,31-Dec-12,1,,NDVC,YES,DE,SFC,N,STIP Plan - Pressure,,,,,,,E040110,,,,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,5,,,,,,,,,,,,27667.2,27667.2,27667.2,27667.2,27667.2,27667.2,,,01-Jan-12,31-Dec-12,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    E040100,EE040100,01-May-00,31-Dec-12,1,,NDVC,YES,DE,SFC,N,STIP Plan - Pressure,,,,,,,E040100,,,,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,5,,,,,,,,,,,,31113,31113,31113,31113,31113,31113,,,01-Jan-12,31-Dec-12,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    E040101,EE040101,01-Aug-00,31-Dec-12,1,,NDVC,YES,DE,SFC,N,STIP Plan - Pressure,,,,,,,E040101,,,,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,5,,,,,,,,,,,,31113,31113,31113,31113,31113,31113,,,01-Jan-12,31-Dec-12,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    E000916,EE000916,01-Oct-00,31-Dec-12,1,,NDVC,YES,NL,SFC-Commercial,E,SIP Plan - Control Technologies,,,,,,,E000916,21000000,555000,99000,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,10,,,,,,,,,,,,34905.65,34905.65,34905.65,34905.65,34905.65,34905.65,,,01-Jan-12,31-Dec-12,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    E000807,EE000807,03-Jan-00,31-Dec-12,1,,NDVC,YES,FR,SFC-Commercial,E,STIP Plan - Cross BU,,,,,,,E000807,,,,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,3,,,,,,,,,,,,35448.56,35448.56,35448.56,35448.56,35448.56,35448.56,,,01-Jan-12,31-Dec-12,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    E000851,EE000851,25-Apr-00,31-Dec-12,1,,NDVC,YES,FR,SFC-Commercial,E,SIP Plan - Control Technologies,,,,,,,E000851,21000000,555000,99000,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,13,,,,,,,,,,,,43283.76,43283.76,43283.76,43283.76,43283.76,43283.76,,,01-Jan-12,31-Dec-12,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    So, the successfully loaded data is being loaded where year=2003 in the CSV as year=0003. Even though the data is loaded fine the data is not correct. For some reason the external table is set to have the year truncated.

  • ORA-1850: hor must be between 0 and 23 error

    Hi All
    i have the following table for creating and inserting i included only two fileds as these are the fields that i'm getting errors on.
    WITH     sample_data     AS
         SELECT     '50709' AS start_date, '2400' AS start_time  FROM dual     UNION ALL
         SELECT     '082510',              '0000'                  FROM dual
    SELECT       *
    FROM       sample_data
    ;DATA:
    START_DATE     START_TIME
    50709                        2400
    082510                        0000And now when i run the query against the table:
    SELECT   direction, car_count_pos, truck_count_pos,
             (car_count_pos + 2 * (truck_count_pos)) AS adjusted, car_count_neg,
             truck_count_neg,
             (car_count_neg + 2 * (truck_count_neg)) AS adjusted_neg,
             TO_DATE (start_date, 'MMDDYY') AS start_date,
             TO_DATE (end_date, 'MMDDYY') AS end_date,
             ROUND (TO_CHAR (TO_DATE (LPAD (start_time, 4, '0'), 'HH24MI'),
                             'HH24.MI'
                   ) AS start_time,
             start_time,
             (TO_DATE (end_date, 'MMDDYY') - TO_DATE (start_date, 'MMDDYY')
             ) AS days
        FROM (SELECT   (CASE
                           WHEN t1.direction = '1'
                              THEN (  COUNT (t1.bin_1_data)
                                    + COUNT (t1.bin_2_data)
                                    + COUNT (t1.bin_3_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS car_count_pos,
                       t1.direction,
                       (CASE
                           WHEN t1.direction = '1'
                              THEN (  COUNT (t1.bin_4_data)
                                    + COUNT (t1.bin_5_data)
                                    + COUNT (t1.bin_6_data)
                                    + COUNT (t1.bin_7_data)
                                    + COUNT (t1.bin_8_data)
                                    + COUNT (t1.bin_9_data)
                                    + COUNT (t1.bin_10_data)
                                    + COUNT (t1.bin_11_data)
                                    + COUNT (t1.bin_12_data)
                                    + COUNT (t1.bin_13_data)
                                    + COUNT (t1.bin_14_data)
                                    + COUNT (t1.bin_15_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS truck_count_pos,
                       (CASE
                           WHEN t1.direction = '3'
                              THEN (  COUNT (t1.bin_1_data)
                                    + COUNT (t1.bin_2_data)
                                    + COUNT (t1.bin_3_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS car_count_neg,
                       (CASE
                           WHEN t1.direction = '3'
                              THEN (  COUNT (t1.bin_4_data)
                                    + COUNT (t1.bin_5_data)
                                    + COUNT (t1.bin_6_data)
                                    + COUNT (t1.bin_7_data)
                                    + COUNT (t1.bin_8_data)
                                    + COUNT (t1.bin_9_data)
                                    + COUNT (t1.bin_10_data)
                                    + COUNT (t1.bin_11_data)
                                    + COUNT (t1.bin_12_data)
                                    + COUNT (t1.bin_13_data)
                                    + COUNT (t1.bin_14_data)
                                    + COUNT (t1.bin_15_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS truck_count_neg,
                       t2.start_date, t2.start_time, t2.end_date, t2.end_time
                  FROM bin_data t1, traffic_sample t2
                 WHERE t1.traffic_sample_id = t2.traffic_sample_id
              GROUP BY t1.direction,
                       t2.start_date,
                       t2.start_time,
                       t2.end_date,
                       t2.end_time)
       WHERE direction IN ('1', '3')
    GROUP BY TO_DATE (start_date, 'MMDDYY'),
             direction,
             car_count_pos,
             truck_count_pos,
             (car_count_pos + 2 * (truck_count_pos)),
             truck_count_neg,
             (car_count_neg + 2 * (truck_count_neg)),
             TO_DATE (end_date, 'MMDDYY'),
             ROUND (TO_CHAR (TO_DATE (LPAD (start_time, 4, '0'), 'HH24MI'),
                             'HH24.MI'
             start_time,
             car_count_negI'm getting the error
    ORA-1850: Hour must be between 0 and 23
    But as you see there is a value 2400 in the table is there any way to get around this? please need help.
    Thanks
    Edited by: thinkingeye on Aug 26, 2010 8:42 AM

    Thanks AP but i came up with something different which i guess sserved the same purpose i used the DECODE fucntion in the INNER query.
    SELECT   direction, car_count_pos, truck_count_pos,
             (car_count_pos + 2 * (truck_count_pos)) AS adjusted, car_count_neg,
             truck_count_neg,
             (car_count_neg + 2 * (truck_count_neg)) AS adjusted_neg,
             TO_DATE (start_date, 'MMDDYY') AS start_date,
             TO_DATE (end_date, 'MMDDYY') AS end_date,
             ROUND (TO_CHAR (TO_DATE (LPAD (start_time, 4, '0'), 'HH24MI'),
                             'HH24.MI'
                   ) AS start_time,
                   ROUND (TO_CHAR (TO_DATE (LPAD (end_time, 4, '0'), 'HH24MI'),
                             'HH24.MI'
                   ) AS end_time,
             start_time,
             (TO_DATE (end_date, 'MMDDYY') - TO_DATE (start_date, 'MMDDYY')
             ) AS days,
             CITY,COUNTY,LOCATION,ROUTE_NBR,ROUTE_TYPE
        FROM (SELECT   (CASE
                           WHEN t1.direction = '1'
                              THEN (  COUNT (t1.bin_1_data)
                                    + COUNT (t1.bin_2_data)
                                    + COUNT (t1.bin_3_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS car_count_pos,
                       t1.direction,
                       (CASE
                           WHEN t1.direction = '1'
                              THEN (  COUNT (t1.bin_4_data)
                                    + COUNT (t1.bin_5_data)
                                    + COUNT (t1.bin_6_data)
                                    + COUNT (t1.bin_7_data)
                                    + COUNT (t1.bin_8_data)
                                    + COUNT (t1.bin_9_data)
                                    + COUNT (t1.bin_10_data)
                                    + COUNT (t1.bin_11_data)
                                    + COUNT (t1.bin_12_data)
                                    + COUNT (t1.bin_13_data)
                                    + COUNT (t1.bin_14_data)
                                    + COUNT (t1.bin_15_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS truck_count_pos,
                       (CASE
                           WHEN t1.direction = '3'
                              THEN (  COUNT (t1.bin_1_data)
                                    + COUNT (t1.bin_2_data)
                                    + COUNT (t1.bin_3_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS car_count_neg,
                       (CASE
                           WHEN t1.direction = '3'
                              THEN (  COUNT (t1.bin_4_data)
                                    + COUNT (t1.bin_5_data)
                                    + COUNT (t1.bin_6_data)
                                    + COUNT (t1.bin_7_data)
                                    + COUNT (t1.bin_8_data)
                                    + COUNT (t1.bin_9_data)
                                    + COUNT (t1.bin_10_data)
                                    + COUNT (t1.bin_11_data)
                                    + COUNT (t1.bin_12_data)
                                    + COUNT (t1.bin_13_data)
                                    + COUNT (t1.bin_14_data)
                                    + COUNT (t1.bin_15_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS truck_count_neg,
                       t2.start_date, t2.start_time, t2.end_date,*decode(t2.END_TIME,2400,'2359',t2.end_time) as end_time*,t3.CITY, t3.COUNTY,t3.LOCATION,t3.ROUTE_NBR, t3.ROUTE_TYPE
                  FROM bin_data t1, traffic_sample t2,location_details t3
                 WHERE t1.traffic_sample_id = t2.traffic_sample_id
                 and t2.TRAFFIC_SAMPLE_ID=t3.TRAFFIC_SAMPLE_ID
              GROUP BY t1.direction,
                       t2.start_date,
                       t2.start_time,
                       t2.end_date,
                       t2.end_time,
                       t3.CITY, t3.COUNTY,t3.LOCATION,t3.ROUTE_NBR, t3.ROUTE_TYPE)
       WHERE direction IN ('1', '3')
    GROUP BY TO_DATE (start_date, 'MMDDYY'),
             direction,
             car_count_pos,
             truck_count_pos,
             (car_count_pos + 2 * (truck_count_pos)),
             truck_count_neg,
             (car_count_neg + 2 * (truck_count_neg)),
             TO_DATE (end_date, 'MMDDYY'),
             ROUND (TO_CHAR (TO_DATE (LPAD (start_time, 4, '0'), 'HH24MI'),
                             'HH24.MI'
             start_time,
             car_count_neg,
             end_time,
             CITY,COUNTY,LOCATION,ROUTE_NBR,ROUTE_TYPE

  • Error while trying to synchronize audio and MIDI.  Sample rate 42804 recognized.  Check conflict between Garageband and external device.

    Sometimes, while playing back my software instrument songs, I get an intermittent pop-up error message, saying "Error while trying to synchronize audio and MIDI.  Sample rate 42804 recognized.  Check conflict between Garageband and external device."
    (Sometimes the five digit number is different, but remains a five-digit number beginning with "4".)
    Simultaneously, the song stops until I press the "Okay" button in the pop-up window.
    When I continue to play the song, the sound is jerky and clipped, and the playhead doesn't keep up with the song, and then suddenly jumps to the part of the song currently being played.
    There's also a sound of static.
    The issue seems to occur whether or not I have my MIDI controller turned on and plugged into my desktop Imac.
    Tony

    Hello,
    open your Audio MIDI Setup utility and set the input to 44100
    https://discussions.apple.com/message/12710638#12710638

  • Short dump Error during VM container communication between ABAP and JAVA.

    Hello All,
    Can anybody please help with resolving the following issue:
    Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly.
    When I try to insert ECC migrated material, everything works fine.
    Here is the details of dump:
    Short text
        Error during VM container communication between ABAP and JAVA
    Information on where terminated
        Termination occurred in the ABAP program "SAPLPRC_INT" - in "GET_PRICING_PROCEDURE_INFO".
        The main program was "SAPMHTTP ". In the source code you have the termination point in line 100 of the (Include) program "LPRC_INTF35".
    Thank you!

    hi Willie,
         this is the dump, and i have used the t-code sm52 . the VMC is not active.
    |Short Text                                                                                        |
    |    Error during VM Container communication between ABAP and JAVA.                                |
    |What happened?                                                                                    |
    |    The current program had to be terminated because of an                                        |
    |    error when installing the R/3 System.                                                         |
    |    Error in the RFC layer.                                                                       |
    |What can you do?                                                                                  |
    |    Note which actions and entries caused the error to occur.                                     |
    |                                                                                                  |
    |    Consult your SAP administrator.                                                               |
    |                                                                                                  |
    |    Using transaction ST22 for ABAP dump analysis, you can view, manage,                          |
    |    and retain termination messages for longer periods.                                           |
    |Error analysis                                                                                    |
    |    An error has occurred in the RFC layer during communication between                           |
    |    JAVA and the ABAP stack. This prevents data from being passed correctly                       |
    |    between the two stacks.                                                                       |
    |                                                                                                  |
    |    Message    = TH_VMC_SERV_NOT_ACTIVE                                                           |
    |    Return code = -1007                                                                           |
    |    Pointer    = "000007DD348F6138"                                                               |
    |How to correct the error                                                                          |
    |    Check whether the VMC is active on your application server. To do this,                       |
    |    run transaction SM52. If the VMC is not active, contact your SAP                              |
    |    administrator.                                                                                |
    Regards
    Charles

  • Error while creating connection between Java and ABAP

    Experts
    I am getting the following error message when I am trying to test the connection between JAVA and ABAP systems.
    1. The system ID is valid
    2. The system was retrieved.
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (s09f71v06.svr.bankone.net:8100)
    5. The host name s09f71v06.svr.bankone.net was resolved successfully.
    6. The server s09f71v06.svr.bankone.net *could not be pinged* successfully.
    I have JAVA and ABAP on the same system. I am trying to establish a connection. I have checked all the settings and they looks fine. I have also pinged from other system to this server and the Ping works fine.
    Please do let m eknow where do I need to check for the errros or logs for the above error message.
    Appreciate your quick help.
    Mahesh

    Check the relevant services are test are active on the Backend system through SICF trransaction.
    Also make sure that default icm services are running.See note 517484.
    More important the connector test in the portal system should work properly,recheck the WAS path etc are correct.
    Regards
    Ajay

Maybe you are looking for

  • Not able to input data in query analyzer

    Hi buddies, I am working on IP.I have created a input ready query.For few values of company code there is no transaction data available,but it should show us blank so that I can atleast punch data.I am able to punch data for company codes for which t

  • How to use Single sign On in CRM2007 ?

    Dear All, I have created a launch transaction for launching ransactions from R3 (using BOR). Now, the problem is when I click on the link in WebUI it gives me a popup for entering R3 User Id and only then it allows navigation to R3 transaction. How d

  • Import duty is shown as CENVAT Availed Additional duty in Cenvat Register

    Hi all, Why Import duty is shown as CENVAT Availed Additional duty in Cenvat Register? ofourse it is going in to right registers at the time of posting excise invoice. but why in register it is shown as addnl duty? Thanks in advance, Girish

  • Adhoc Query Outer Join

    Hi Is it possible to have adhoc queries with outer join since logical databases use inner joins.. Was just wondering if this is possible Thanks Case

  • I believe I have a key logger or spyware on my computer

    I believe I have a key logger or spyware on my computer.  Any help?