Error in BPM - Error when processing node '0000000065' ParForEach index

Hi All,
I have an issue .. I have done 1:n mapping successfully and would like to place the Send step in loop instead of a Block .. The reason being I have the count of how many times the Send step should executed for multiline.. I need to receive an Acknowledgement for each send step.. If I dont receive the required number of Acknowledgements then .. I need to revert back some Creations which is a business requirement ..
So .. I have initialized a container operation variable i to '0' .. Then the loop condition is i < count .. Send the multi-container .. Receive the Response .. If dont receive the desired response for any one of the multi-line then I need to do a cancellation process in a loop again .. So .. now I am getting an Exception "Error when processing node '0000000065' (ParForEach index 000000)
Message no. SWP088" in the loop step ..
It is fine if somebody can suggest alternate logic can be applied as well but first preference to use a loop which consumes lesser system resources ..
Kindly look into the Issue
Regards,
Raj
Edited by: raj2112 on Sep 21, 2010 2:34 PM

if you use a loop step, you will send one message per time. ussing block step you have parallel processing ussing ParForEach. now is for X reason the item cannot be created, do a roll back in the target system. the problem here you will do the rollback once the last message reach.
the other posibility is to handle application ack in the sender step. it will let you know it the message was processed success and this ack could be the end condition of your block step. but you cannot use this with loop step.
take a look to this
http://help.sap.com/saphelp_nw04/helpdata/en/55/65c844539349e9b1450581ab44a5e6/frameset.htm

Similar Messages

Error "Error in ABAP statement when processing an internal table. table."

Hello,
I am facing the error when tried for GR from SRM portal for my shopping cart and for others created shopping cart. The error is
"Error in ABAP statement when processing an internal table. table."
I have the central receipient role. Couold any body assist me?
Thanks,
Pijush

Hi Harish,
Execute the query in RSRT and check whether you have any short dump is in ST22. This would give a clear idea at what might have gone wrong.
Another thing is to check whether the code for the variable is fine in the user exit.
Hope this helps.
Bye
Dinesh

Error: java.lang.nullPointerException when process is complete

Hello,
I keep getting the below error in the log file when the process is complete, does any one has this error before? The error does not affect the process but it is kind of annoying when looking at the log file. I try to use the other component beside the Foundation>DecisionPoint>execute but I still get the same error.
[5/16/11 14:57:19:047 CDT] 00000047 AWS E com.adobe.workflow.engine.ProcessEngineBMTBean stallAction stalling action-instance: 40746 with message: javax.ejb.TransactionRolledbackLocalException: ; nested exception is: java.lang.NullPointerException
Can any one please advise on how to fix the error above to stop showing in the log file. I am still using LC ES 8.2.1 with SP3.
Thanks,
Han Dao

If you could give a little more info it would help. The web.xml for example, if your mapping it correctly, etc...

Phone hog links give me error message "an error occuredon the server when processing the URL

When ever I click on the links sent from phone hog.com to earn free minutes I get the following error message. "An error occurred on the server when processing the URL. Please contact the system administrator" I have made several contacts with phone hog help and they claim it is my settings on my computer. However I contacted my internet provider TDS telecom and they indicated that this is a phone hog issue. I do not have any other problems with any other links I click on with this type of error message.

Hello msFit,
it's well known, that in all these cases you describe I'm not a friend of a detailed troubleshooting. To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

Error in bpm!

Folks, in this test in the Q env, the bmp errors out with the below stated error.
this is the first test on Q after a transport...any inputs?
Work item : Object FLOWITEM method EXECUTE cannot be executed

sorry about the confusion:
Here is the thing, in the PE moni......monitoring with technical details
there is a failure at the mapping(transfrmation) step. this is really weird, because it works fine on Dev.......
this is the sort of error that comes up: its cracking me out....
RESULT PROCESSING:
PROCESS_NODE: Error when processing node '0000000028' (ParForEach index 000000)
CREATE: Error when creating a component of type 'Dynamic Fork'
CONSTRUCTOR: ParForEach table element contains 2722 entries (only_____________
looks like this is a detailed error . Is there a way where i can drill down to the detailed message for the Constructor?
Do i have do change some settings on my BPE on Q, looks to me like the table element entries need to be increased?
Please correct me if i make no sense.
Thanks a lot,,
Hank
Edited by: hankovak jovani on Apr 8, 2009 2:00 AM

Error in Workflow wait for event node

Hello Experts,
I am working on one QM notification. I shall explain the scenario first:
1) User will take the usage decision on inspection lot in QA11. When user will take decision and save inspection lot BUS2045 event USAGEDECISIONMADE will be triggered and initiate my workflow here.
2) After workflow initiation system will create notification and send to approver, but here i have wait step in my workflow for BUS2078 - Created (Notification).
wait for Event step
BO: BUS2078
EV: CREATED
I am posting error below:
Error when starting work item 000000294361
Error when processing node '0000000060' (ParForEach index 000000)
Error when creating a component of type 'Wait Step'
Error when creating an event item
Error within method CL_SWF_RUN_WIM_EVENT->_CREATE_WORKITEM_CONTAINER
Error within method CL_SWF_RUN_WIM_EVENT->_GET_INIT_WORKITEM_CONTAINER
Workflow 000000294361 wait step 0000000060: No valid object ID in container element 'Notification
Node 60 - wait for event step.
Re.,
Guri

Hi,
Based on your description what I felt is you are making use of a wait step in which you have choose to wait till BUS2078 event CREATED is occured ... right.. Now can you please clear me that where and how this event will triggered.
or is it some thign like you are making use of event creator step and in this case, When ever you are making use of the eventcreator step and a BOR object inside it make sure that specific BOR object is already instatitaed in the workflow container , if it is instantiated then only it will try to identify the instance or the BOR and it will try to rasie the event.
Regards
Pavan

Wait for event Node - (ParForEach index 000000)

Hi all,
I have a wait event and my work flow resulted in error at this node with the (ParForEach index 000000) error..
what might be the problem..
Thanks in advance,
Sethu

I've been facing the same issue as the guy above.
Here is my log from SWI2_DIAG.
Error when creating an event item
Error when creating a component of type 'Passo de espera' -->or 'Step' or 'Wait event'
Error when processing node '0000000070' (ParForEach index 000000)
Error during result processing of work item 000027142544
Error within method CL_SWF_RUN_WIM_EVENT->_CREATE_WORKITEM_CONTAINER
Error within method CL_SWF_RUN_WIM_EVENT->_GET_INIT_WORKITEM_CONTAINER
Workflow 000027142543 wait step 0000000070: No valid object ID in container element 'ZPP_DESVIO'
Work item 000027142543: Object FLOWITEM method EXECUTE cannot be executed
Error when processing node '0000000070' (ParForEach index 000000)
Error when processing node '0000000070' (ParForEach index 000000)
Thanks in advance!
Edited by: João Henrique Araujo on Mar 23, 2010 9:08 PM

MESSAGE_NOT_USED - ERR in BPM multi mapping process

Hi Guys,
Can any solve this issue please,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have gone through all kind of prilimanary changes like
removed IP, reimported to ID
deleted IP and I did again from scrach (BPM)
no errors in BPM, activated, SXI_cache : Process return code shows 0, cache activated several times, server bounced.
Please your valuable inputs for this!!
Thanks
San

San,
A similar issue has been resolved here ... give it a try -
BPE_ADAPTER:MESSAGE_NOT_USED
When you double-click on Integration Process, you will get an option for Repeat Activation on the right-hand side header.
Hope this helps.
Regards,
Neetesh

BPM: Error when trying to deploy an process containing a database adapter

Hello,
We are facing an issue when we try to deploy a BPM/SOA application containing a BPM process containing a database adapter.
So, I only created a new BPM process (async process) and added a database adapter to insert something in a database, then called this database adapter in a service activity.
In the weblogic console, the DbAdapter targets are correct. I created the data source with a JNDI name, with the correct targets also.
In BPM I suppose I do not have to manually change any setting file ?
I simply create the database adapter and specify the correct JNDI name ?
when I try to deploy, I always receive the following error :
[11:08:56 AM] Received HTTP response from the server, response code=500
[11:08:56 AM] Error deploying archive sca_DbTstInsert_rev1.0.jar to partition "default" on server soa_server1 [http://afpo-devapp02:8001]
[11:08:56 AM] HTTP error code returned [500]
[11:08:56 AM] Error message from server:
There was an error deploying the composite on soa_server1: [JCABinding] [DbTstInsert.DA_LangEnumInsert/1.0]Unable to complete unload due to: Cannot locate Java class oracle.tip.adapter.db.DBWriteInteractionSpec: Cannot locate Java class oracle.tip.adapter.db.DBWriteInteractionSpec.
[11:08:56 AM] Check server log for more details.
[11:08:56 AM] Error deploying archive sca_DbTstInsert_rev1.0.jar to partition "default" on server soa_server1 [http://afpo-devapp02:8001]
[11:08:56 AM] #### Deployment incomplete. ####
[11:08:56 AM] Error deploying archive file:/C:/Code/JDeveloper/DbTstInsert/DbTstInsert/deploy/sca_DbTstInsert_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Has someone already faced this problem ?
I searched on Google, but couldn't find anything about this.
Thanks,
Benjamin

Post it to the BPM Forum
Business Process Management SuiteOn a sidenote , this might help http://yuanmengblog.blogspot.in/2011/04/osb-complains-jca-class-cannot-be-found.html (target your soa_server to your DB adapter)
OR
Error while publishing the JCA Adapter.
Edited by: Sudipto Desmukh on May 9, 2012 7:22 PM

BPM Error Permanent Error in BPE inbound processing

Hi
I require some urgent help on this BPM issue.
We are trying to integrate SRM PO being directly sent to Vendors using HTTP. We are getting an error saying Permanent Error in BPE inbound processing. The scenario works like this.
SRM system would sent PO using the SRM Standard interface PurchaseOrderRequest_Out. We need to transform the message into cXML format and send it to the vendors using HTTP adapter. Using the HTTP response we need to trigger an email to the business process team.
The SRM interface is under the software component SAP SRM Server 5.5 and our mapping is being done in a common software component and for the vendor interface we have another software component. We have created a relationship in the SLD by making the common SWC as dependent software component to SAP SRM Server and Vendor Software Component. So in the integration repository we are able to get the interfaces for the SAP SRM Server and Vendor Software Component under the common software component. The receive step for this BPM is a copy of the standard SRM interface PurchaseOrderRequest_Out(as the standard interface is an asynchronous interface) and we would require an abstract interface for the BPM. We have checked the semantics for the BPM and its fine. The related ID development is in place. When the message is being triggered, it gives us this above mentioned error. When we go to the QRFC monitor we are able to check the details.
Regards,
Indranil

Hi Indranil,
     You don't see you BPM....
First go to SXI_CACHE and check that your BPM is listed there and that the compilation has been completed succesfully.
Is this the first time the BPM is being used? If so check if has been configured. For example, go to RWB->Component Monitoring->BPE in <SYSID>
and check if any error is listed there.
In order to check what is going on in your BPM you can trace it:
                  SXMB_MONI_BPE->Diagnosis Processes with Errors
                  SXMB_MONI->Process, get your msg and click on 'PE'. You should see the workitems and see if there is any error.
         Hope this helps you....
         Regards,
            Encinas.

Permenant error in bpm inbound processing error in inbound queue of pi7.1

Hi Experts,
In E filling scenario in SAPPI7.1, iam facing a problem. i.e In sxmb_moni message monitoring, the message was schedule at outbound side.when i extend that, the message was stuck in smq2 with "permenant error in bpm inbound processing".can any one please tell me how to relove this issue.
Thanks & Regards,
Giri.

Hello
Check the note #1126656 BPE-TS: Permanent errors in the BPE inbound processing. This describes some possible causes and solutions for this error.
Regards
Mark

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "
Please help

Wait a second, Photoshop can make lattes now? Personally I prefer my coffee black, but man have I been under-utilizing this program.

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to resolve this Error ORA-04030: out of process memory when trying to a

Hi
I am connecting as a sysdba and trying to execute a query on the V$Logmnr_contents but getting the following Error
ORA-04030: out of process memory when trying to allocate 408 bytes (T-LCR
structs,krvuinl_InitNewLcr)
Can anyone guide me how to resolve this issue.
Thanks

Hi,
As root user, edit the /etc/sysconfigtab file, and try to set the udp_recvspace parameter to 262144 and reboot the machine :
inet:
udp_recvspace = 262144
Metalink note 297030.1 Ora-04030 During Execution Of LogMiner Query
Nicolas.

[Forum FAQ] Troubleshooting "An error has occurred during report processing" message when viewing SCCM reports

Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted)

Error in BPM - Error when processing node '0000000065' ParForEach index

Similar Messages

Maybe you are looking for