Error in building an executable file

Hi,
I want to create an .exe file of my VI. I have done complete setup to create an exe file (specifying correct source files, dependencies and others).
While building, i got the following error which is first time i am seeing. Previously i have created so many exes without any such kind of this errors.
(I have fully licensed application builder).
Error 1052 occurred at AB_Source_VI.lvclass:Copy_SourceItem.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Build.lvclass:Build_from_Wizard.vi -> AB_UI_Frmwk_Build.lvclass:Build.vi -> AB_UI_FRAMEWORK.vi -> AB_Item_OnDoProperties.vi -> AB_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: The LabVIEW filename is invalid.
Error 1052 occurred at AB_Source_VI.lvclass:Copy_SourceItem.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Build.lvclass:Build_from_Wizard.vi -> AB_UI_Frmwk_Build.lvclass:Build.vi -> AB_UI_FRAMEWORK.vi -> AB_Item_OnDoProperties.vi -> AB_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: The LabVIEW filename is invalid.
Please do help me to resolve my issue.
Thanks and regards,
Sriram Iyer

Hi Sriram,
Its sounds like the problem with the lvclass which you are using in the vi.
which LV version are you using? also good if you post your code.

Similar Messages

I get an error 1 when I'm building an executable file in Labview 6.0

I'm trying to create an executable file in labview 6.0 but I get an error 1 (see attachment) with a GSim file (control and simulation toolkit). I didn´t install the toolkit (on the computer i´m trying to create the executable) because we lost the CD and we had the toolkit installed on another computer so I copy the files I needed.
Attachments:
error1labview.doc ‏56 KB

You probably have a linkage issue.
Open the top level VI on the machine that has the toolkit installed, and make sure that it opens without an error (the run arraow should be white). Press : ctrl + shift + run arrow. This forces a recompile of the code, and will update the internal links to all the sub-VIs. Then, save the top level VI, and close it. Open a new VI, so that there is only one VI in memeory, and it is a new (blank) VI, and try to build the applictaion again.
J

Error while building an executable from vi

Hello,
I am trying to make a .exe file from the VI which includes Vision Aquisition Software also and while building it I get a error message--
Error 1502 occurred at AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclass: Save.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Build.lvclass:Build_from_Wizard.vi -> AB_UI_Frmwk_Build.lvclass:Build.vi -> AB_UI_FRAMEWORK.vi -> AB_Create_Build_Application.vi -> EBUIP_Global_OnCommand.vi -> EBUIP_Global_OnCommand.vi.ProxyCaller
Possible reason(s):
LabVIEW: Cannot save a bad VI without its block diagram.
Can anyone tell me how to solve this problem ?
Thanks in advance.

I had done that and did not work. I did not get rid of the old build defination, but started a brand new one via Tools>Build Application (EXE) from VI... I got the same error 1502. Inspecting the offending VI did not yield any obvious problem with the block diagram.
Upon searching for error 1502, I found this Know Issue link:
http://www.ni.com/white-paper/11869/en. Issue ID 255617 stated:
Error 1502 can occur if dependencies are placed in non executing case structures
In previous versions of LabVIEW you could place VIs in a case structure with a constant wired the the case selector. This would load the VIs at runtime. If you have this pattern and attempt to build an executable you could receive error 1502
Workaround: Don't use unreachable code
So the issue is I have an case structure with hard coded boolean, so the other case is unreachable.

Error in making RT executable file

Dear Sir,
I had build a project in Labview 2011 version and now I have upgraded to labview 2013 version. I want to make an executable file and deploy onto RT Target but when I start building the exe file following message appears
Detail Disable dialog.vi and Not found dialog .vi does not support the current target.
Error 1003 occured at AB_Get_detailed_brokenVI_Message.vi and AB_Targetfile.lvclasspen_top_level_vis.vi
Please suggest me some solution as soon as possible.

Did you understand Gerd's reply? RT (Real-Time) targets run a special "Real-Time" Operating System, specifically not Windows, and do not support the usual user interaction via the Front Panel. You may have run across the term "Head-less System", which means a system, running a program, but without user interaction.
When you build an application for Windows, you end up with an "executable" having the extension ".exe". This is designed to be started by selecting the application and getting it to run, for example, by double-clicking it (the "default" action). In contrast, building a stand-alone executable for an RT system gives you a file with the extension ".rtexe" -- such a file (to the best of my knowledge) can only be executed by being "marked" on the Target as the "Start-up application". The idea is when you turn your Real-Time Target on, it automatically loads the (single) Executable that you built, and starts running it "head-lessly".
Hope that clarifies things.
BS

Error when building an executable in BridgeVIEW

Hi,
Every time I try to build an executable in BridgeVIEW I get an error that I have to close all VIs before building an EXE, but I only have the top level VI open. I tried shutting down the PC and restarting but nothing works. I have seen this in LabVIEW, but LV closes them for you.
Any ideas?
Thanks.

Lupita wrote:
HI,
You are probably right. So here is what Ive tried:
1) Restarting my PC. Opening a blank new VI and trying to build an application by adding my "main.vi" as a top level VI. This way I make sure there are NO VIs opened.
The list that appears on the Build Application menu contains ALL VIs called by my main.vi.
Thanks again.
I can't really say that I remember a behaviour like this but considering that the latest BridgeVIEW version corresponds to LabVIEW 4.1 (which was never released) or so, I would say that this is so long ago that my memory might be flaky here.
And the application builder back then was also not the same as it is now. I'm afraid unless you are going to use a more recent version of LabVIEW together with the DSC Toolkit (which is basically what BridgeVIEW evolved into) there is little cahnge that anybody can help you with this here.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

SQLJ: unable to find input file null   (Error while building EJB.jar file)

Hi,
I am working on open SQL/SQLJ with the following details
Name:Employee application(adding an employee to MAXDB through SQLJ connection)
FRONT-END:JSP/SERVLET
Middle:Stateless bean with DAO(DB connection) coming from SQLJ
Back-end:MAXDB
I have following in abc.sqlj file
#sql public context Connx with (dataSource = "java:comp/env/jdbc/SAPTSTDB")
and creating instance and adding to DB in another say xyz.sqlj file
          Connx con = null;
          try{
               con = new Connx();
                    #sql [con] {insert into TMP_DB1(EMPLOYEE_ID, FIRST_NAME, LAST_NAME, EMAIL)
                    values(:(employeeDTO.getEmployeeId()),
                             :(employeeDTO.getFirstName()),
                             :(employeeDTO.getLastName()),
                             :(employeeDTO.getEmail()))};
My build has no errors..but while building EJB archive with above sqlj files, am getting following error
"SQLJ: unable to find input file null" for both sqlj files.
Anybody faced this kind of issue, pls reply back.
Thanks
parveen

Hi,
I am working on open SQL/SQLJ with the following details
Name:Employee application(adding an employee to MAXDB through SQLJ connection)
FRONT-END:JSP/SERVLET
Middle:Stateless bean with DAO(DB connection) coming from SQLJ
Back-end:MAXDB
I have following in abc.sqlj file
#sql public context Connx with (dataSource = "java:comp/env/jdbc/SAPTSTDB")
and creating instance and adding to DB in another say xyz.sqlj file
          Connx con = null;
          try{
               con = new Connx();
                    #sql [con] {insert into TMP_DB1(EMPLOYEE_ID, FIRST_NAME, LAST_NAME, EMAIL)
                    values(:(employeeDTO.getEmployeeId()),
                             :(employeeDTO.getFirstName()),
                             :(employeeDTO.getLastName()),
                             :(employeeDTO.getEmail()))};
My build has no errors..but while building EJB archive with above sqlj files, am getting following error
"SQLJ: unable to find input file null" for both sqlj files.
Anybody faced this kind of issue, pls reply back.
Thanks
parveen

Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.

Hi Everyone,
Whenever I install some new software in my new laptop I get this error:-
Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.
I have tried synchronizing the clocks but it doesn't remove the problem.
These softwares work on another laptop that i have, which also runs windows 7.
Can someone please tell me the solution as this is extremely urgent.
Thanks In Advance.
-Michael

In short:
============
My permissions were all fine, so if anyone has trouble resolving the issue after sorting permissions then make sure you try fully disabling your anti-virus / anti-spyware / firewall applications, because that was the cause for me.
In detail:
============
Problem:
Failed to install this application
- http://www.ssware.com/cryptoobfuscator/download.htm
- on Windows 8.1 x64
- Get error message "Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied."
First Candidate Solution
The issue turns out to NOT be security rights on the Temp folder
ESET Smart Security HIPS Advanced Memory Scanner is the cause
http://kb.eset.com/esetkb/index?page=content&id=SOLN2908&actp=search&viewlocale=en_US&searchid=1392804914417
Instead, I went and turned off all the ESS protections one by one and it turned out to be HIPS that is causing this false positive.
In fact, it is the Advanced Memory Scanner option under HIPS that is causing the error, while the application in question is legit (using Inno Setup and presumably trying to write to the user temp folder, not sure whether just logs or to execute from there)
Furthermore, Smart Security logs have no entries under HIPS even though I ticked "Log all blocked operations" under the HIPS "Advanced setup" - it was quite a journey to find out the cause :)
Thank you. I have the same OS and installed ESET Smart Security as well. And it is resolved now.
I just want to add, that by "Temporarily disable protection" and "Temporarily disable firewall", it doesn't work. You have to disable HIPS, as KristjanL said.

STANDA MOTOR AND BUILDING AN EXECUTABLE APPLICATION

Hello,
I have some problem to build a executable file from the main labview program.
For other applications and devices i don't have any problems (i build
executable files and use them on other computer without any problems).
But with this stepper motor, the main program and the examples given by the
comapany in Labview works and the executable files don't (By not working i have
no particula error message but no remote control at all).
Has someone met this problem?
I think that there is something wrong during compilation (links are missing or
something like that?)
I would appreciate help on this point
Thanks a lot
Regards
Julien

the config file i rename it in *.txt in order to be able to send on the site
Julien
Attachments:
config_julien_V1.txt ‏1 KB

Can't run executable file by LV7.1

Dear all,
I am surprised I can't build and run executable file by LV7.1.
I used to write some vi with LV7.1, and built the executable file according to these vi. It was no problem to build and run this executable file that time. Now I can open these vi well with LV7.1, bu I can't run this executable file well, it will prompt a error, please refer to the attachment. I try to build a executable file according to a simple vi, and then I can't run this exe file well any more.
Can you help me to solve this problem? Thank you in advance.
Evan
Solved!
Go to Solution.
Attachments:
Error prompt.jpg ‏2305 KB

@Christian: That's not correct.
One reason for this to happen is if LV 7.1.1 is installed and then you install an application including run-time engine built in 7.1. This corrupts the run-time engine.
See here: http://digital.ni.com/public.nsf/allkb/680E61A4D02158A186256F7A0073C228
Daniel

How to Create Executable file for a project for Crio Platform

hi,
i am using CRIO 9014 platform for my application development.
i am controlling ( Reset & then Run ) FPGA from RT application .
Through TCP/IP communication the Acquired data ( from FPGA then followed by some Computation Logic in RT ) is sending to HOST computer .
during the above process
First i am starting the RT Application ( the TCP network will be continuously in listen mode ) then
i am starting my HOST Application in the project .
here i want to build my complete project as an executable file
so that i no need to start RT Application first and then HOST Application.
Could you please send me One sample Project with built in simple ADC Acquisition loop / logic in FPGA , then one sample logic / while loop in RT to acquire this ADC data from FPGA and send to HOST via TCP/IP network then the HOST with GUI for Display in the HOST .
This complete project should be build in .exe file .
Please complete project files and .exe file as a zip file.
Regards,
Venkat

Hi,
I might be confused but what I understand from what you have mentioned is that you want to create a project having two VI's. One running on your FPGA target and another running on you host computer.You want to build a single executable file to complete the entire operation.
Unfortunately you cannot have both VI's in same executable file. You can build one executable file and deploy on your FPGA target that will start running as soon as the target is booted. And you can create another executable file for running VI on your host computer. And instead of using TCP to transfer data, you could use "Interface FPGA" from FPGA module to communicate between your host computer and communicate.

VI works but executable file doesn't

I built an application in LV 8.2 to read in some binary data, create some graphs, and make a microsoft word report. The VI works just fine. However, when I build the executable file so that I can run it stand-alone, part of it doesn't work. I have an event structure which waits for user input from 3 buttons - Make Report, Open Report in Word, and Quit. Open and Quit both work fine, but Make Report just doesn't seem to do anything. When I built the executable, I made sure to include all of the source files. All of my stuff is in the zip file attached. The top-level is called Graph Report Maker. Can anyone help me out with this? I'm probably just doing something wrong when I build it, but I'm not sure what. Thanks.
Attachments:
Report Maker.zip ‏2212 KB

Yes, there are some RGTK VI's that need to be included as dynamic VI's in the build spec.
See this KB article for all the details.
Ed
Message Edited by Ed Dickens on 07-25-2007 04:34 PM
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Error 8 File permission error while building executable for a RT

I got error 8 File permission error while building executable for a RT. It happened always after build, I mean new startup.rtexe and startup.alias files have been created. At the build properties, it was set use default .alias file.
I had the executable built successfully at one time.
The detail message is:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 8 occurred at Open/Create/Replace File in RTBEP_Generate_Deploy_Instructions.vi->RTBEP_Invoke_Build_Engine.vi->RTBUIP_Build_Invoke.vi->RTBUIP_Build_Rule_Editor.vi->RTBUIP_Open_Properties.vi->RTBUIP_Item_OnDoProperties.vi->RTBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
I checked relevant posts, couldn't find any clue.
Please give me some ideas.
Thanks.

Hi Ya-hoo,
Error building application in LabView 8.0 seems to describe a similar situation. The .alias file is important, as described in that discussion forum.
Cheers.
| Michael K | Project Manager | LabVIEW R&D | National Instruments |

Error 8 occurred when building an executable due to file permission error?

I received this error on executable builds from two different .vis. Other .vis in the project build without incident and the message below doesn't seem to indicate the file that is causing the problem, unless it is the SPT-errors.txt file listed at the end of the error message.
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 8 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
C:\Program Files\National Instruments\LabVIEW 8.5\project\errors\Japanese\SPT-errors.txt

Hi DanielAllis,
Like mentioned earlier, there is most likely an application on the internet that you can find and use where you can see what processes are calling specific files or folders to see if that specific file is being used by anything else. It doesn't sound like this is the root of your problem, but it couldn't hurt to check. Also, I have seen a similar problem to this with someone who was using the software Subversion and Tortoise with their application. I am not familiar with this software in particular, but I have attached a link below that goes through the steps that this other person took to try and fix the same error when having this software on their computer. Let me know if any of this helps!
http://forums.ni.com/ni/board/message?board.id=170&message.id=172537&query.id=115461#M172537
Regards
Noah R
Applications Engineering
National Instruments

Error while Building Jar files using [ejbc]

Hi,
I am building EJB's using [ant ejbc] for upgrade from Weblogic 6.1 to Weblogic 10.0. The code gets build fine but when creating the Jar file it is throwing me the following error :-
[ejbc] Loading properties file: /C:/dev/MarketingOne/thirdparty/sms/lib/logging.//config/logging.properties
[ejbc] SMS_ERROR:
[ejbc] Properties:
[ejbc] - Failed to load properties file: /C:/dev/MarketingOne/thirdparty/sms/lib/logging.//config/logging.properties
[ejbc] java.io.FileNotFoundException: C:\dev\MarketingOne\thirdparty\sms\lib\logging.\config\logging.properties (The system cannot find the path specified)
[ejbc] - Either invalid SMS_HOME: /C:/dev/MarketingOne/thirdparty/sms/lib/logging./ or invalid <I>SERVICE</I>_P
ROPERTIES_FILE_NAME
[ejbc] at java.io.FileInputStream.open(Native Method)
[ejbc] please set SMS_HOME using -D option at JVM start up.
Can anybody provide me with a solution for this as the path mentioned for SMS Logging.properties file is correct..??

Actually the folder 'lib' consists of a logging Executable Jar file and the SMS folder consists of 'config' and 'lib' folders. Inside the 'config folder is a logging.properties file.
But Actually I am not getting any idea as to from where this command is being triggered because my targets.xml file does not have any such command whereas it just builds all the files and then creates the jar file.
Is it a problem of using EJB 2.0 in Weblogic 10.0 environment or jdk1.5..??

Error while building executable

Hi,
while building an executable I get the following error:
Error 6 occurred at Librarian Path Location.vi Can't list parent path
Possible reason(s):
LabVIEW: Generic file I/O error.
NI-488: I/O operation aborted.
If I try to build the executable of the initial version of the same VI, staying in the same file system
of the same machine, everyting can be build fine
Thanks for your help

I feel your pain. Compiling and building installations in LV is NOT intuitive. My guess is you have failed to install a necessary LLB or driver in your compiling or installation process. You will need to make sure other computers the program is on have the lv runtime installed and you may need to select other options to install during the installation build listed under "additional installers" tab such as NI-488 or NI_VISA in order to enable communications to external instruments. It works on the development computer because those things are already installed. You might do a search of "Error 6" here in the lv forum as I recall it's kind of a common problem.

Error in building an executable file

Similar Messages

Maybe you are looking for