Error when building an executable in BridgeVIEW

Hi,
Every time I try to build an executable in BridgeVIEW I get an error that I have to close all VIs before building an EXE, but I only have the top level VI open. I tried shutting down the PC and restarting but nothing works. I have seen this in LabVIEW, but LV closes them for you.
Any ideas?
Thanks.

Lupita wrote:
HI,
You are probably right. So here is what Ive tried:
1) Restarting my PC. Opening a blank new VI and trying to build an application by adding my "main.vi" as a top level VI. This way I make sure there are NO VIs opened.
The list that appears on the Build Application menu contains ALL VIs called by my main.vi.
Thanks again.
I can't really say that I remember a behaviour like this but considering that the latest BridgeVIEW version corresponds to LabVIEW 4.1 (which was never released) or so, I would say that this is so long ago that my memory might be flaky here.
And the application builder back then was also not the same as it is now. I'm afraid unless you are going to use a more recent version of LabVIEW together with the DSC Toolkit (which is basically what BridgeVIEW evolved into) there is little cahnge that anybody can help you with this here.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

When building an executable I get the error message var.lsb not found.

When building that executable with LV 5.0 it will work, but it will not work on a korean version of WinNT 4.0.

When exactly does the error message come up? When you're doing the build or when you attempt to run the executable?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Error When building ess/tra/tre and ess/tra/tre/trs DC's

I had customized the ess/tra/tre and ess/tra/tre/trs DC's and had them working, but I do not know what I did or what happened that am now getting the following errors when building, can anyone help tell what the problem could be?
Error
-     The project was not built since its classpath is incomplete. Cannot find the class file for com.sap.xss.tra.model.openccmodel.OVSOpenCostcenterModel. Fix the classpath then try rebuilding this project.
-     HDI_HNS15.02_Desstratresap.com
Error
-     This compilation unit indirectly references the missing type com.sap.xss.tra.model.openccmodel.OVSOpenCostcenterModel (typically some required class file is referencing a type outside the classpath)
-      InternalVcTreReview.java
-      HDI_HNS15.02_Desstratresap.com/gen_wdp/packages/com/sap/xss/tra/tre/vc/review/wdp
-     line 0

For anyone who might need to know, I managed to fix this by adding tra to the required projects on the build path. On the Navigator View, right click -> Properties -> Java Build Path -> Projects tab -> check dependant project.

Error when I am executing any method in shopping cart

Dear All ,
I am getting following error when I am executing any method in shopping cart.
*"No data found for contact person 0000000244 . Inform system administration . "*
Please Can you help me with this error .

Your error states:
!syParameterNotFound,dDocTitle
Can you confirm that your profile includes all required data, specifically, the dDocTitle? Fix this issue, then re-check your logs. if there are other missing required parameters, fix each one.
Eventually, you should have a successful check-in.
Hope this helps,
-ryan

Icon path restricted error when building release version for ipad3

Hi,
i get the following error when building the release build ipa file for ipad 3: "The path icon.png is restricted. If you were trying to package Icon.png you should correct the case." In debug mode everything works. My icon is under assets folder and added in the app-xml with:
<icon>
<image72x72>assets/icon_72.png</image72x72>
</icon>
Did I missed something in configuration? Seems to be that the problem is known but cant find a solution for it. If i try to packegae per command line despite the fact building works I could not install the app. When I change the icon tag to use no icon everything works fine. Any ideas?
Greetz and thanks in advance!

I solved it. When you export the release build you can choose package contents to be compiled in the ipa. When I tried to add an icon at first I named it icon.png, which seems to be a reserved name. The configuration to include this icon.png was still saved though i deleted it. Wired... After unchecking the ceckbox for icon.png not to be compiled in the ipa, the release build was build.

I get a "vi is not executable" error when building an application.

I have an ongoing project that has worked fine in the past when building an application. I have recently added some report generation toolkit vis(Excel) and get an error for some of the ni vis and some of my own that call lower level excel vis. The error is that he vi is not executable, however they run fine in the development environment. I do not get this error if I save all vi's into one llb with save with options command and then build. However, when I try to run the app, this error re-appears. Also, do I have to add the dynamically loaded vi's that are part of the toolkit in my build script? Could this be the cause of the problem? If so, what's the best way to find all of them? Any suggestions?

You have hit in on the nail! You do need to add the dynamically loaded VIs when you are creating an executable from your VI. You need to add _wordsub.lib and _exclsub.lib as dynamically loaded VIs into your executable. Try this and let us know if you have any more problems with it.
J.R. Allen

Error 8 occurred when building an executable due to file permission error?

I received this error on executable builds from two different .vis. Other .vis in the project build without incident and the message below doesn't seem to indicate the file that is causing the problem, unless it is the SPT-errors.txt file listed at the end of the error message.
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 8 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
C:\Program Files\National Instruments\LabVIEW 8.5\project\errors\Japanese\SPT-errors.txt

Hi DanielAllis,
Like mentioned earlier, there is most likely an application on the internet that you can find and use where you can see what processes are calling specific files or folders to see if that specific file is being used by anything else. It doesn't sound like this is the root of your problem, but it couldn't hurt to check. Also, I have seen a similar problem to this with someone who was using the software Subversion and Tortoise with their application. I am not familiar with this software in particular, but I have attached a link below that goes through the steps that this other person took to try and fix the same error when having this software on their computer. Let me know if any of this helps!
http://forums.ni.com/ni/board/message?board.id=170&message.id=172537&query.id=115461#M172537
Regards
Noah R
Applications Engineering
National Instruments

Programmatic Build gives error when in an executable

I'm using the programaticbuild.vi (sse attachement). It works fine when I'm in development but when I run the executable I get an error 7.
To demonstrate the problem, I attach some files: the Addtion.vi and the Addition.proj which is the project to build an executable to add 2 numbers.
I now use the ProjectBuilder.vi and ProjectBuilder.proj. to build an application where I give the path to a project file and it builds this project file.
If you run the ProjectBuilder.vi and give it as an input path the Addition.proj , the Addition.exe will be created successfully. But if you build the ProjectBuilder.proj then run the ProjectBuilder.exe and again give it the path to the Addition.proj, this will give you an error.
I have come across to other similar problems but I couldn't find a solution to my problem.
Thanks
Attachments:
builds.zip ‏21 KB

Hi,
Just a random thought, You can try using the "open VI reference" function instead of using the path control alone.
Regards,
Nitzz
(Give Kudos to good Answers and Mark it as a Solution if your problem is Solved)

I recieve the following error when running an executable ("This VI is not Executable. The full development version of Labview is required to fix the errors"

I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
I have the professional development system
I can run the main VI
all the required DLL's are in the dependencies section of the project window.
I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
Thanks in advance to all labview users for your help
Attachments:
project window.PNG ‏36 KB

other PNG
Attachments:
Broken Arrow on EXE.PNG ‏179 KB

Error when building cube

Hi,
I get this error when I am building the cube:
XOQ-00703: error executing OLAP DML command "(SYS.AWXML!R11_COMPILE_TIME_DIM('TIME.DIMENSION') : ORA-00600: internal error code, arguments: [xspg: RSALOC02], [], [], [], [], [], [], [], [], [], [], []
Has anyone ever seen this?
Regards /Magnus

Got an answer on this from Oracle support. The issue is solved by applying patch 9789172.
/Magnus

Why might a VI break when building an executable on one machine versus another?

I have a large test application that is designed to work on several machines. In the process of testing I go to each machine and open the project on the machine I am testing. When I am satisfied the project is behaving as expected I build the executable and test that it is working as expected. This is where my problem occurs.
More Background: This software was originally meant to run one test at a time and was upgraded to run multiple tests at the same time(sharing resources and the like). To accomplish this, another VI was written that opened instances of the original VI (clone). I don't know if this is common, however this has been in use for a while and is known to work even after the migration to the network(probably not the problem).
My issue is that I can build the software on one machine and it will work on another machine, yet when I try to build the same exact project from the other machine it will no longer open the instance of the original VI. I probed the error wire and it indicates that the VI must be broken. So I open the VI and it has no errors.
I have no idea how to diagnose this any further. Anyone have any ideas?
-Nate
Solved!
Go to Solution.

Try mass compiling the entire project hierarchy prior to making a build. Also, if you are dynamically launching VI's, you must put them in the "Always Include" section of a Build Spec.
Do either of these things help?
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

Error when trying to execute ODI Interface

Hello,
I receive the following error when I try to execute an ODI interface. The interface contains two models trying to load a .csv file into an Oracle table. The models seem to be working and I can right click on the source file and "View Data". I have specifed LKM File To Oracle (SQLLDR), IKM Oracle Incremental Update, and CKM Oracle. But still receive this error on the fourth step of the execution "Loading - SS_0 - call sqlldr via Jython"
org.apache.bsf.BSFException: exception from Jython: Traceback (innermost last):
File "<string>", line 3, in ?
OS command has signalled errors
     at org.apache.bsf.engines.jython.JythonEngine.exec(Unknown Source)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Thank you for your help

Almost...
You need the sql loader where the "OS command" will execute it means where the agent is installed (once you will execute it from an agent when at production).
AND that machine where the agent is, need to "see" the target database through the Oracle Listener (tnsnames)....
Is just like to execute a Sql Loader from you own machine, but who write the command will be ODI.
Does it make any sense to you?
Message was edited by:
Cezar Santos

Why do I get 'ResolveManifestFiles task failed' error when building a WPF app that references WinRT API?

0
down vote
favorite
I am working on a WPF app that I want to create for Windows 8. I followed steps mentioned in
Hansleman's blog to make some manual modifications using WinRT functions in a WPF app. Everything worked well, until I tried to publish the app. When I clicked on publishing the app I got error "The 'ResolveManifestFiles' task failed unexpectedly.
System.ArgumentException: Value does not fall within the expected range."
Afterwards, it will produce the same error when attempting a simple solution build.
Even if you create a simple WPF project and add the references mentioned in blog to access WinRT functions and publish, this issue can be reproduced.
I think it would be common scenario to call WinRT functions from WPF and someone should have done it. Is anyone aware what should be done to fix this issue?

I am having the same problems and came across this article while researching a workaround.
It is surprising more people aren’t talking about this.
Here are the steps to reproduce the problem; Using Visual Studio Express 2012 (x64) create a new VB Windows Forms Application.
Unload the project and edit the [ProjName].vbproj in the solution explorer.
Add <TargetPlatformVersion>8.0</TargetPlatformVersion> to the <PropertyGroup>.
Save and reload the project. In Add Resource/Reference Manager add the Windows.minmd found under Windows/Core.
This WinRT/Desktop solution will run as expected. Now try to Publish this solution.
It will FAIL with the following ERROR; “The ResolveManifestFiles task failed unexpectedly, Value does not fall within the expected range.”
Attempting to build or run the solution again now will fail with the same Error.
The only way to build the project now is to remove the “Enable ClickOnce security settings” option under the project properties Security settings.
Occasionally using this trick, the solution will build but not run.
When that happens jiggle around with Debug/Release Solution Configurations and the Any CPU/x64 Solution Platforms then rebuild and try the run again.
This fussing around will get you through development however any attempt to publish with restore the ClickOnce security setting and create the previous Error.
The first question here is how do you publish a WinRT app for the desktop with VS2012 Express.
Then secondly, if that is not possible can we publish this Express solution with a 3rd party deployment tool like InstallShield Limited Edition or the WIX Toolset.
Neither however seems functional in a VS Express environment.
Then thirdly, are there ways to access hardware sensor devices from a desktop solution without resorting to the WinRT API.
Any ideas or new research directions would be greatly appreciated.

Error while building an executable from vi

Hello,
I am trying to make a .exe file from the VI which includes Vision Aquisition Software also and while building it I get a error message--
Error 1502 occurred at AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclass: Save.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Build.lvclass:Build_from_Wizard.vi -> AB_UI_Frmwk_Build.lvclass:Build.vi -> AB_UI_FRAMEWORK.vi -> AB_Create_Build_Application.vi -> EBUIP_Global_OnCommand.vi -> EBUIP_Global_OnCommand.vi.ProxyCaller
Possible reason(s):
LabVIEW: Cannot save a bad VI without its block diagram.
Can anyone tell me how to solve this problem ?
Thanks in advance.

I had done that and did not work. I did not get rid of the old build defination, but started a brand new one via Tools>Build Application (EXE) from VI... I got the same error 1502. Inspecting the offending VI did not yield any obvious problem with the block diagram.
Upon searching for error 1502, I found this Know Issue link:
http://www.ni.com/white-paper/11869/en. Issue ID 255617 stated:
Error 1502 can occur if dependencies are placed in non executing case structures
In previous versions of LabVIEW you could place VIs in a case structure with a constant wired the the case selector. This would load the VIs at runtime. If you have this pattern and attempt to build an executable you could receive error 1502
Workaround: Don't use unreachable code
So the issue is I have an case structure with hard coded boolean, so the other case is unreachable.

Runtime error when trying to execute transaction OB58

Hi all,
We have upgraded from SAP system 4.6c to ECC 6.0 . We are facing one error in the FI transaction OB58.
When trying to delete any finanicial version or trying to create any new financial version , we are getting a runtime error which
states that " Error when attempting to IMPORT object "X011F". and its giving short dump at this point .The description of the error is :
Short text
    Error when attempting to IMPORT object "X011F".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLFAGL_FSV" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
     not caught in
    procedure "FSV_POSITIONS_CONVERT" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing the object "X011F", the component 1 in the dataset
    had a different length from the corresponding component of the
    target object in the program "SAPLFAGL_FSV".
    The length is 4 in the dataset, but 32 in the program.
Thanks,
Sumit

Hi Sumit,
We Upgraded our system from 4.6C to ECC 6.0 and
I am facing same error. We applied note 1544367. After applying not also we are facing issue during
import x011p to lt_x011p
         i011z to lt_x011z
         x011v to lt_x011v
         x011s to lt_x011s
         x011f to lt_x011f
from database rfdt(bs) client p_mandt
                               id p_versn
                        accepting padding
                         ignoring conversion errors.
You faced same issue after applying note or if you have any solution please let me know.
Regards,
Mahesh

Error when building an executable in BridgeVIEW

Similar Messages

Maybe you are looking for