Error in cl_bp_combo_job --- cl_tc_multifan_net_task method add_task

I try to creata a Job with objects.
I use class cl_bp_combo_job and cl_bp_abap_job
data: cljob type ref to cl_bp_combo_job.
data: clsinglestep type ref to cl_bp_abap_job.
create object: cljob type cl_bp_combo_job.
cljob->set_name( i_name = 'Job1' ).
clsinglestep = cl_bp_job_factory=>make_abap_job( ).
clsinglestep->set_report( i_report = 'ZTEST' ).
cljob->add_task( new_task = clsinglestep ).
Is generated an exception for Add_task.
I found an error in class cl_tc_multifan_net_task method add_task.
Row 40 / 44
insert tasknet_wa into tasknet.
the right code i suppose is
insert tasknet_wa into table tasknet.
Do you know others class or methods to create a Job?
Thanks

Hi
i think it's poosible to create a job multi step:
-Method IF_BP_JOB_ENGINE~GENERATE_JOB_COUNT
- Method SET_REPORT
- Method IF_BP_JOB_ENGINE~PLAN_JOB_STEP
- Method SET_REPORT
- Method IF_BP_JOB_ENGINE~PLAN_JOB_STEP
- Method SET_REPORT
- Method IF_BP_JOB_ENGINE~PLAN_JOB_STEP
- Method IF_BP_JOB_ENGINE~RELEASE_JOB
Max

Similar Messages

Error while calling a method on Bean (EJB 3.0)

I am getting an error while calling a method on EJB. I am using EJB3.0 and my bean is getting properly deployed(i am sure b'cos i can see the successfullly deployed message). Can any body help me
Error is -->
Error while destroying resource :An I/O error has occured while flushing the output - Exception: java.io.IOException: An established connection was aborted by the software in your host machine
Stack Trace:
java.io.IOException: An established connection was aborted by the software in your host machine
at sun.nio.ch.SocketDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:33)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at com.sun.enterprise.server.ss.provider.ASOutputStream.write(ASOutputStream.java:138)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at org.postgresql.PG_Stream.flush(PG_Stream.java:352)
at org.postgresql.core.QueryExecutor.sendQuery(QueryExecutor.java:159)
at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:70)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:482)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:461)
at org.postgresql.jdbc1.AbstractJdbc1Connection.rollback(AbstractJdbc1Connection.java:1031)
at org.postgresql.jdbc2.optional.PooledConnectionImpl$ConnectionHandler.invoke(PooledConnectionImpl.java:223)
at $Proxy34.close(Unknown Source)
at com.sun.gjc.spi.ManagedConnection.destroy(ManagedConnection.java:274)
at com.sun.enterprise.resource.LocalTxConnectorAllocator.destroyResource(LocalTxConnectorAllocator.java:103)
at com.sun.enterprise.resource.AbstractResourcePool.destroyResource(AbstractResourcePool.java:603)
at com.sun.enterprise.resource.AbstractResourcePool.resourceErrorOccurred(AbstractResourcePool.java:713)
at com.sun.enterprise.resource.PoolManagerImpl.putbackResourceToPool(PoolManagerImpl.java:424)
at com.sun.enterprise.resource.PoolManagerImpl.resourceClosed(PoolManagerImpl.java:393)
at com.sun.enterprise.resource.LocalTxConnectionEventListener.connectionClosed(LocalTxConnectionEventListener.java:69)
at com.sun.gjc.spi.ManagedConnection.connectionClosed(ManagedConnection.java:618)
at com.sun.gjc.spi.ConnectionHolder.close(ConnectionHolder.java:163)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeDatasourceConnection(DatabaseAccessor.java:379)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.closeConnection(DatasourceAccessor.java:367)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeConnection(DatabaseAccessor.java:402)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.afterJTSTransaction(DatasourceAccessor.java:100)
at oracle.toplink.essentials.threetier.ClientSession.afterTransaction(ClientSession.java:104)
at oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl.afterTransaction(UnitOfWorkImpl.java:1816)
at oracle.toplink.essentials.transaction.AbstractSynchronizationListener.afterCompletion(AbstractSynchronizationListener.java:161)
at oracle.toplink.essentials.transaction.JTASynchronizationListener.afterCompletion(JTASynchronizationListener.java:87)
at com.sun.ejb.containers.ContainerSynchronization.afterCompletion(ContainerSynchronization.java:174)
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:467)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:121)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:650)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:193)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1705)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1565)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:947)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:178)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:717)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:473)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1270)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:479)
End of Stack Trace
|#]
RAR5035:Unexpected exception while destroying resource. To get exception stack, please change log level to FINE.
EJB5018: An exception was thrown during an ejb invocation on [DepartmentSessionBean]
javax.ejb.EJBException: Unable to complete container-managed transaction.; nested exception is: javax.transaction.SystemException
javax.transaction.SystemException
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:452)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

Means theres an error in XML/ABAP conversion probably due a syntax error...
Regards
Juan

Error in Pre- Export methods for a request

Hi All,
I am getting an error while releasing a request, its giving
"Error in Pre- Export methods for a request DM0k.....". Could you please tell me why and how can I rectify that?
Thanks.
NA

Please go through as per the link
[SAP Transport Request |http://www.sap-basis-abap.com/sapbs008.htm]
thanks
G. Lakshmipathi

In F110 I getting error No valid Payment method found but i did

While doing intercompany clearance using Pay methd Y in F110 payment run in payment proposal system showing error "No valid payment method found" this is showing in vendor line item and if i am clicking customer line item showing debit bal still exit because system not picking my pay mthd Y in vendor line item which one i assigned in vendor master data. But for another vendor its posting clearing this error occur only for particular vendor. Any can help me to rectify my error.

Hello,
We were get the same error message and found that the solution was that the vendor must have an address.
In OBVU, Payment method / country, the required master record specs had Street checked on. This reqiured an address for the vendor. Once we entered an address the F110 payment run was successful for this vendor.
Rgds,
Dan

Automatic payment error - no valid payment method found

I created an invoice which i try to clear in f110. the vendor has the appropriate payment methods specified too but still I get this error "No valid payment method found " for that document.
kindly assist, if anyone knows where can be the error.
this is only for one company code.
thanks

Hi,
Check the configuration of Automatic Payment Program. Check "Bank Determination" and verify whether the paymetn method is set up for the House Bank determined by Automatic Payment Program configuration.
If the payment method in invoice or vendor master does nto match with the payemnt method set up for the house bank, you may get this error.
Regards,
Chirag
Pls. award points if this is useful.

F110 error - No Valid Payment Method found - Account ID missing

Hello All,
I am trying to clear some Vendor invoices in F110 using a Payment method. We have entered the House Bank at the time of posting the Vendor Invoice (Invoice is posted through an BAPI) and I am able to see the House Bank in BSEG - HBKID.
Further for the Payment Method we are using only one House Bank and one Account ID - which has been configured correctly in FBZP - Bank Determination.
However when we are running F110 for clearing the invoices - we are getting an error no valid payment method found. I am able to see the Payment Method & the House Bank while editing the Proposal - only Parameter which is missing is Account ID - though we have maintained it in Bank Determination configurartion.
Any help will be appreciated a lot to fix this issue.
Thanks and regards,
Ankur

Dear,
Everything may be alright but payment method is assigned to Bank Account in Bank selection section FBZP. So, system will process payment from the bank account with assigned payment method. So, there is no Account ID system is not able to find the payment method. It is difficult to provide remedy. If house bank and account ID is not in the vendor master then update them.
Just try it out....all the best.
Regards,
Chintan Joshi.

Warning An internal error has occurred in method getMarkup()

Hi,
I have created simple portlet using Oracle JDeveloper and it is deployed to OAS 10.1.3, When I register wsrp provider to Oracle as portal 10.2.1 and add portlet to some page, then on page is shown following error: "Error: Could not get markup. The cookie or session is invalid or there is a runtime exception."
In the same time is to oas 10.1.3 log writted warning: ">An internal error has occurred in method getMarkup()"
What is wrong?
Thanks

I am encountering the same error as you were facing.Did you get any resolution on this issue?If yes,can you please pass on the require stuff as soon as possible.I need to crack this as quickly as possible so any help in this regard would be very useful.Thanks
-Arindam
mail to:[email protected]

Error:java.lang.Double:method parseDouble(Ljava/lang/String;)D not found.

Hi ,
oracle apps version : 11.5.10.2 and database version 11.2.0.2.
OS version Solaris Sparc 64 Bit.
We were performing a cloing activity on a new server and now while opening forms we are getting the following error :
error:java.lang.Double:method parseDouble(Ljava/lang/String;)D not found.Please suggest what has to be done.
Regards
Kk

Hi ,
D:\Documents and Settings\800045916>java -version
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode, sharing)We have been struggling with the Solaris server for this. Is something needed from there also or just need to have the latest JRE in the windows client machine.
Regards
Kk

Operation not found error while calling AM methods from managed bean

Hi,
operation not found error while calling AM methods from managed bean.
written a method with two parameters in AM.
exposed the method in AM client interface
in the page bindings added the method in method action ..left empty in the value fields of the parameters.
calling the method from managed bean like below
String userNameVal = (String)userName.getValue();
String passwordVal = (String)password.getValue();
OperationBinding operationBinding =
ADFUtils.findOperation("verifyLogin");
operationBinding.getParamsMap().put("userName",userNameVal);
operationBinding.getParamsMap().put("password",passwordVal);
operationBinding.execute();
i am getting operation verifyLogin not found error.Please suggest me something to do.
Thanks
Satya

Hi vlsn,
Can you try with the below code
// in your backing bean
OperationBinding operation = bindings.getOperationBinding("verifyLogin");
//Put your both parameters here
operation.getParamsMap().put("parameter_name1", parameterValue1);
operation.getParamsMap().put("parameter_name2", parameterValue2);
operation.execute();
if (operation.getResult() != null) {
Boolean result = (Boolean) operation.getResult();
and share the result.
regards,
Rajan

Getting error while creating abstract method

hi folks,
i facing issue for ABSTRACT Class.
I am trying to create abstarct method, (refered example from saptechnical site),
I created one attribute i-num, created one method AREA, in implementation area , i made it as Abstract, then i did syntax check, then it is giving below error.
*Class ZTEST_CLASS01_AB,Method AREA
The abstract method "AREA" can only be implemented after its
redefinition (METHODS AREA REDEFINITION).*
i tried all the ways..
created subclass for this, i writted some code in AREA of Sub-class, there it is giving dump, because first one is not activated properly..
could you please somebody help me on this.
Sri

Hello Arshad,
Create a class(ZABSTRACT) and make its type as Abstract( Which means atleast one of its methods is abstract)
We can have abstract classes with all it's methods as non-abstract or concrete. A small example is given below:
CLASS gcl_abstract DEFINITION ABSTRACT.
PUBLIC SECTION.
    METHODS concrete. "Concrete
ENDCLASS.                    "gcl_abstract DEFINITION
*       CLASS gcl_abstract IMPLEMENTATION
CLASS gcl_abstract IMPLEMENTATION.
METHOD concrete.
    WRITE: / `I'm a concrete method`.
ENDMETHOD.                    "concrete
ENDCLASS.                    "gcl_abstract IMPLEMENTATION
*       CLASS gcl_abstract_sub DEFINITION
CLASS gcl_abstract_sub DEFINITION INHERITING FROM gcl_abstract.
PUBLIC SECTION.
    METHODS concrete REDEFINITION.
ENDCLASS.                    "gcl_abstract_sub DEFINITION
*       CLASS gcl_abstract_sub IMPLEMENTATION
CLASS gcl_abstract_sub IMPLEMENTATION.
METHOD concrete.
    super->concrete( ).
    WRITE: / 'Abstract class might not have abstract methods at all!'.
ENDMETHOD.                    "concrete
ENDCLASS.                    "gcl_abstract_sub IMPLEMENTATION
START-OF-SELECTION.
DATA: go_abstract TYPE REF TO gcl_abstract_sub.
CREATE OBJECT go_abstract.
go_abstract->concrete( ).
Although i will agree there is no point in making a class as abstract & having no abstract method
@Sri: Looks like you're trying to implement the abstract method "AREA" in the abstract class hence the error. For abstract method you cannot define their implementation in the corres. abstract class.
BR,
Suhas
Edited by: Suhas Saha on Mar 30, 2011 12:04 PM

Error while invoking onHeartBeat() method, exception is "Cannot load header

I have a problem that when I read out an IMAP mailbox I sometimes get the above problem, and sometimes I don't get the problem.
Below I attached the main parts of my environment to get an insight within the code:
bpel.xml of process that is reading out the IMAP mailbox
<activationAgents>
<activationAgent className="com.collaxa.cube.activation.mail.MailActivationAgent"
heartBeatInterval="60">
<property name="accountName">account</property>
</activationAgent>
account.xml
<mailAccount xmlns="http://services.oracle.com/bpel/mail/account">
<userInfo>
<displayName>Eneco Process lAyer</displayName>
<organization>iFactory</organization>
<replyTo>[email protected]</replyTo>
</userInfo>
<outgoingServer>
<protocol>smtp</protocol>
<host>10.126.16.73</host>
<port>25</port>
<authenticationRequired>false</authenticationRequired>
</outgoingServer>
<incomingServer>
<protocol>imap</protocol>
<host>10.126.20.8</host>
<port>143</port>
<email>IFACAORTA</email>
<password>CRYPT{IB3B7SrA3kMYHoBDzWwsEg==}</password>
<folderName>InBox</folderName>
</incomingServer>
</mailAccount>
The domain.log of the appserver
<2006-12-04 15:08:25,546> <ERROR> <default.collaxa.cube.activation> <HeartBeatListenerJob::execute> Error while invoking onHeartBeat() method, exception is "Cannot load header".
<2006-12-04 15:08:25,562> <ERROR> <default.collaxa.cube.activation> <HeartBeatListenerJob::execute> Error while invoking onHeartBeat() method, exception is "No content".

This problem is occuring only on BPEL release 10.1.3.
I retested this again on BPEL 10.1.2, but there the problem did not occur.

Error while invoking onHeartBeat() method, exception is "Username supplied

hi ...
I am trying to invoke bpel process when we get email..
but i am getting the following error..
Error while invoking onHeartBeat() method, exception is "Username supplied in error".
<mailAccount xmlns="http://services.oracle.com/bpel/mail/account">
     <userInfo>
          <displayName>Oracle BPM</displayName>
          <organization>xxx</organization>
          <replyTo>bpel@localhost</replyTo>
     </userInfo>
     <outgoingServer>
          <protocol>smtp</protocol>
          <host>xxxxx</host>
          <authenticationRequired>false</authenticationRequired>
     </outgoingServer>
     <incomingServer>
          <protocol>pop3</protocol>
          <host>xxxxx</host>
          <port>143</port> -- tried with 110 prot also
          <email>xxxx</email>
          <password></password>
          <folderName>Inbox</folderName>
          <authenticationRequired>false</authenticationRequired>
     </incomingServer>
</mailAccount>
Can any one help me on this ?
thanks,
bharath

This problem is occuring only on BPEL release 10.1.3.
I retested this again on BPEL 10.1.2, but there the problem did not occur.

Error in pre-export methods for request

hi...
while releasing the TR we are facing this error msg..." Error in pre-export methods for request" it is showing lock in fornt of the TR.neither be able to delete the TR ....
do reply as soon as possible..

Hi,
I had the same error PU238.
What I did was:
Execute SE03 to unlock the object.
Then execute the program 'RS_STREE_OBJECTS_TO_REQ_GET', not sure what it does.
Afterwards, it worked perfectly.
Hope that information helps you.
Regards,

Itunes Store error message: "your payment method was declined.."

Hello! I'm from Ukraine, today, tried to buy the app (It worked before) but itunes error message: "your payment method was declined ..".
The card is fine, tried different. What's the problem? how to fix?

Help please

Getting error in event handler method onPlugFromStartView

Hi,
I am getting error in event handler method onPlugFromStartView java coding. The error message is u201CThe method wdGetwelcome componentcontroller() is undefined for the IPrivatevieew.
Plese explain how to resolve this error to deploy the webdynpro application successfully.
Thanks,
Kundan.

Hi
1.It seems some thing corrupt or some problem .
2. Do one exercise Create one new Dc --component -View ,In component write one method.
a) Open the view and then try to add that component.
Let us know the result
Best Regards
Satish Kumar

Error in cl_bp_combo_job --- cl_tc_multifan_net_task method add_task

Similar Messages

Maybe you are looking for