Error in client import

hi Experts,
here i need some help for my present issue
about client import;
i finished client export with warnings
after i copied cofiles/data files from source to target system
in my target system we have 3 clients 333,222,444
i need to copy into 444
so after copying files
login into 444 client with sap*
and execute t-code stms_import and checked about my transport requests but not find
so i try to add it in Extrasother reqadd
but i get an error :
description is :
Transport control program tp ended with error code 0212
Error:could not access file as supposed (see dev_tp or s)
in tp out put it shows
error:/usr/sap/trans/cofiles/st0003.dev :cant open:permission denied
then i given 775 permission for all data/cofiles
then again i tried to add request but result is same
i don't understand what happen so please help in this issue

login into 444 client with sap
and execute t-code stms_import and checked about my transport requests but not find
so i try to add it in Extrasother reqadd
but i get an error :
description is :
Transport control program tp ended with error code 0212
Error:could not access file as supposed (see dev_tp or s)
in tp out put it shows
error:/usr/sap/trans/cofiles/st0003.dev :cant open:permission denied
Solution:Create a user with SAP_ALL and SAP_NEW profile and repeat the steps. SAP* cannot do/kick of any transport or creating of coflle and datafile.

Similar Messages

Error in client import process

Hi Team,
Yesterday we have performed the client copy from qulaity to developement server using Export and import method(Using SAP_ALL profile).Created two transport requests one is for cleint specific and another one is for client specific texts.
client specifix transport ran to sucess but transport request for texts(QASKX00080) was ended with return code -8. Error log given some list of objects which says original object can not be replace. Below are the objects list.. Please suggest and let us know what action needs to be taken.
Objects list:
   R3TRFORMZ110_CHECKFAX original object cannot be replaced
   R3TRFORMZ110_IN_AVIS original object cannot be replaced
   R3TRFORMZ110_IN_CHECK original object cannot be replaced
   R3TRFORMZ140_ACC_STAT_01 original object cannot be replaced
   R3TRFORMZ140_ACC_STAT_02 original object cannot be replaced
   R3TRFORMZ140_PAY_CONF_01 original object cannot be replaced
   R3TRFORMZ140_PAY_CONF_02 original object cannot be replaced
   R3TRFORMZ140_PAY_CONF_IO original object cannot be replaced
   R3TRFORMZ140_STNDRD_LTTR original object cannot be replaced
   R3TRFORMZ141_VENDOR_BACS original object cannot be replaced
   R3TRFORMZ150_DUNN_01 original object cannot be replaced
   R3TRFORMZ150_DUNN_02 original object cannot be replaced
   R3TRFORMZ150_DUNN_03 original object cannot be replaced
   R3TRFORMZ150_DUNN_04 original object cannot be replaced
   R3TRFORMZ150_DUNN_05 original object cannot be replaced
   R3TRFORMZ150_DUNN_06 original object cannot be replaced
   R3TRFORMZ150_DUNN_07 original object cannot be replaced
   R3TRFORMZ150_DUNN_08 original object cannot be replaced
   R3TRFORMZ150_DUNN_09 original object cannot be replaced
   R3TRFORMZVINVOICE01 original object cannot be replaced
   R3TRFORMZ_AUDDIS_LETTER original object cannot be replaced
   R3TRFORMZ_BACS_EMAIL_LET original object cannot be replaced
   R3TRFORMZ_CONFVENDOREMAI original object cannot be replaced
   R3TRFORMZ_CUST_AGREEMENT original object cannot be replaced
   R3TRFORMZ_CUST_VATNO_REQ original object cannot be replaced
   R3TRFORMZ_DD_BULKCHNGLTR original object cannot be replaced
   R3TRFORMZ_DD_REQUEST_NEW original object cannot be replaced
   R3TRFORMZ_DD_SCHEDULE original object cannot be replaced
   R3TRFORMZ_ECP_CHEQUE original object cannot be replaced
   R3TRFORMZ_ECP_INVOICE original object cannot be replaced
   R3TRFORMZ_INVOICE_LIST original object cannot be replaced
   R3TRFORMZ_INVOICE_LISTS original object cannot be replaced
   R3TRFORMZ_MEDRUCK_CONF original object cannot be replaced
   R3TRFORMZ_MEDRUCK_EVAL original object cannot be replaced
   R3TRFORMZ_MEDRUCK_PO original object cannot be replaced
   R3TRFORMZ_MEDRUCK_RFQ original object cannot be replaced
   R3TRFORMZ_MEDRUCK_TENDER original object cannot be replaced
   R3TRFORMZ_MEDRUCK_VATA original object cannot be replaced
   R3TRFORMZ_MEDRUCK_VATB original object cannot be replaced
   R3TRFORMZ_REJ_DD_LETTER original object cannot be replaced
   R3TRFORMZ_RVINVOICE01 original object cannot be replaced
   R3TRFORMZ_RVINVOICE02 original object cannot be replaced
Forms:
   Object FORM Z110_CHECKFAX has not yet been imported successfully
   Object FORM Z110_IN_AVIS has not yet been imported successfully
   Object FORM Z110_IN_CHECK has not yet been imported successfully
   Object FORM Z140_ACC_STAT_01 has not yet been imported successfully
   Object FORM Z140_ACC_STAT_02 has not yet been imported successfully
   Object FORM Z140_PAY_CONF_01 has not yet been imported successfully
   Object FORM Z140_PAY_CONF_02 has not yet been imported successfully
   Object FORM Z140_PAY_CONF_IO has not yet been imported successfully
   Object FORM Z140_STNDRD_LTTR has not yet been imported successfully
   Object FORM Z141_VENDOR_BACS has not yet been imported successfully
   Object FORM Z150_DUNN_01 has not yet been imported successfully
   Object FORM Z150_DUNN_02 has not yet been imported successfully
   Object FORM Z150_DUNN_03 has not yet been imported successfully
   Object FORM Z150_DUNN_04 has not yet been imported successfully
   Object FORM Z150_DUNN_05 has not yet been imported successfully
   Object FORM Z150_DUNN_06 has not yet been imported successfully
   Object FORM Z150_DUNN_07 has not yet been imported successfully
   Object FORM Z150_DUNN_08 has not yet been imported successfully
   Object FORM Z150_DUNN_09 has not yet been imported successfully
   Object FORM ZVINVOICE01 has not yet been imported successfully
   Object FORM Z_AUDDIS_LETTER has not yet been imported successfully
   Object FORM Z_BACS_EMAIL_LET has not yet been imported successfully
   Object FORM Z_CONFVENDOREMAI has not yet been imported successfully
   Object FORM Z_CUST_AGREEMENT has not yet been imported successfully
   Object FORM Z_CUST_VATNO_REQ has not yet been imported successfully
   Object FORM Z_DD_BULKCHNGLTR has not yet been imported successfully
   Object FORM Z_DD_REQUEST_NEW has not yet been imported successfully
   Object FORM Z_DD_SCHEDULE has not yet been imported successfully
   Object FORM Z_ECP_CHEQUE has not yet been imported successfully
   Object FORM Z_ECP_INVOICE has not yet been imported successfully
   Object FORM Z_INVOICE_LIST has not yet been imported successfully
   Object FORM Z_INVOICE_LISTS has not yet been imported successfully
   Object FORM Z_MEDRUCK_CONF has not yet been imported successfully
   Object FORM Z_MEDRUCK_EVAL has not yet been imported successfully
   Object FORM Z_MEDRUCK_PO has not yet been imported successfully
   Object FORM Z_MEDRUCK_RFQ has not yet been imported successfully
   Object FORM Z_MEDRUCK_TENDER has not yet been imported successfully
Thanks & Regards,
Vinod

Hi Mohit,
Checked in transport log in STMS transaction.There i could not find the reason why these objects were failed to overwrite the original obejcts. As Sven and markus said and also sap help says the same If you still want to import the object, repeat the import with Unconditional Mode 2.
Recently we had performed cleint copy from production to Qulaity and the process went well with out any errors. yesterday we did client copy from Quality to Developemt. We are Curious these objects appeared to copy back from PRD to QAS without generating any problems u2013 why these errors were generated this time round when we perform same obejcts from QAS to DEV.
The objects that are created the errors are all SAP script forms and donu2019t appear to have been copied back to DEV from QAS u2013 all these objects are only ever changed on DEV and then transported to QAS and PRD so they should already be identical to each other. We have carried out some spot checks on a sample of the listed objects and can find no differences.
Thanks & Regards,
vinod

Error in Client import Post Processing

Hi after importing a client with SAP_ALL profile when i am running SCC7 i m getting following Error
Runtime Error DBIF_RSQL_SQL_ERROR
Except CY_SY_OPEN_SQL_DB
Sql error in the database when accessiong a table
Missing RAISING Clause in Interface
Program SAPLSAZI
Please Guide
Thanks

Hi,
we also had the same error in dBIF_REPO_SQL_ERROR
We checked the following
1. Network speed between CI and database.
2. SM21 logs
Then we raised a message with SAP. SAP replied us to upgraded the AIX Operating System to 5.3.
We are in the process of doing it

Error occured while importing .der file in R/3 System

Hi Friends..
I tried to connect R/3 system with portal through SSO concept.
for that I have downloaded (.der) file from portal.
After that I tried to import that file through STRUSTSSO2 transaction in R/3 system, at that time I got
error message like " Error occured while importing"
so I can't able to import that (.der) file into R/3 System.
Please guide me with exact steps.
What should I do?
Thanks
Gowrishankar

Hi Micheal and raghav thanks for your reply.
Yes Micheal already we have installed .der file to other client in the same R/3 System
may be that's why it shows an error?
so what is the solution for this kind of scenarious?
Thanks
Gowrishankar

Error in Client Export - TP program failed at OS

Hi,
I was trying the client export/import and export went succesfully.
Copied the cofile and data files into respective folder, Transport request added to buffer successfully but while importing TR using TP at OS the system shows following error:
Reason for error: TP_FAILURE
Return code: 0012
Error message: A tool used by tp aborted
and the log says
sap_dext called with msgnr "900":
SQL error "2289" during "" access: "ORA-02289: sequence does not exist"
IMPORT OF COMMANDFILE ONLY
end date and time : "20090716122953"
exit code : "12"
Please guide me,
Thanks in advance

Hi,
This problem relates to Oracle Log Sequence. Please follow the below steps:
Log on to the OS using <SIDADM> login.
Execute the command :
C:> SQLPLUS "/as sysdba"
At SQL prompt execute the following statements:
truncate table schema.ddlog;
create sequence ddlog_seq minvalue -2147483640 maxvalue 2147483640 increment by 1 cache 50 noorder nocycle;
(Here schema will be SAP<SID>)
Try client import after this.
Hope this will help.
Thanks
LK
Edited by: Lokendra on Jul 17, 2009 6:31 PM

Step by step process of client import

hi Experts
this is swathi, here i performed client export/import process(transport domain is same for both system)
client export over with warnings and i need for client import
below are my steps(performed) :
after client import, i copied those co-files and data files in to target system then
excuting t-code -stms_import in target system and checked in queue
then i didn't find my transport request in target file (stms_import)so i added my transport request in Extras>other requests>add
then it shows error description:
(transport control program tp ended with error code 0212)
ERROR:could not access file as supposed(see dev_tp or s)
what happened i dont know so please i need some help at this stage ,what can i do next

hi gagan deep,
i checked in target system tp system log
it shows
ERROR:/usr/sap/trans/cofiles/ST00003.CLL:cant open
:permission denied
now my question is
i copied cofiles and data files into target system this step is correct? if correct
i added in extras>others req->add ........this my steps is correct or any mistakes are their please reply me
if correct means now iam going to give permissions for target systems all data/co-files
(usr/sap/trans/cofiles/ST00003.CLL)
can go

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Client import taking too much time

hi all,
i am importing a client , i it has complete copy table 19,803 of 19,803 but for last four hours its status is processing
scc3
Target Client           650
Copy Type               Client Import Post-Proc
Profile                 SAP_CUST
Status                  Processing...
User                    SAP*
Start on                24.05.2009 / 15:08:03
Last Entry on           24.05.2009 / 15:36:25
Current Action:         Post Processing
- Last Exit Program    RGBCFL01
Transport Requests
- Client-Specific       PRDKT00004
- Texts                 PRDKX00004
Statistics for this Run
- No. of Tables             19803 of     19803
- Deleted Lines                 7
- Copied Lines                  0
sm50
1 DIA 542           Running Yes             SAPLTHFB 650 SAP*
7 BGD 4172   Running Yes 11479 RGTBGD23 650 SAP* Sequential Read     D010INC
sm66
Server No. Type PID Status Reason Sem Start Error CPU Time   User Report   Action          Table
prdsap_PRD_00 7 BTC 4172 Running   Yes    11711 SAP* RGTBGD23 Sequential Read D010INC
plz guide me why it is taking too much time , while it has finished most of the things
best regard
Khan

The import is in post processing. It digs through all the documents and adapts them to the new client. Most of the tables in the application area have a "MANDT" (= client) field which needs to be changed. Depending of the size of the client this can take a huge amount of time.
You can try to improve the speed by updating the table statistics for table D010INC.
Markus

Dispatcher not started after client import

hi all,
here i imported one client and the client import process is running but in that system we have other clients my question is users are unable to log in into that other clients
so i checked into os leve (dpmon) and after i try to stopsap and its stoped and after it is not started the error message is shown as
oscollector is already running,,   and
trying to start sid database .....
log file :/ /home / sidadm / startdb.log
please what can i do for my server start

hi srineevas elow are shown my usr/sap/sid/sys/exe/run/startdb
#!/bin/sh
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ind/ind/startdbora#4 $
NAME: startdb
PURPOSE: startup an ORACLE database
PARAMETER:
      none
Environment
      ORACLE_HOME     must be set
      ORACLE_SID      must be set
Return Codes:
      0       ok. DB may have already been running.
      1       erroneous license check
      2       DB not startable: inconsistency?
      3       environment check failed
      4       orasrv error / starting of listener error
      5       script was killed
USAGE: startdb [ORACLE_HOME] [startRemoteService]
DESCRIPTION:
- initialize
- start orasrv / now: lsnrctl start
- check database state (connect)
- startup database, change archivelog mode
if this procedure is changed (e.g. Test System)
there is no guarantee of hotline support if the system crashes
- check database state (connect)
- check archive log state
- licence check
DGUX and Sequent exceptions
R3trans is not available on the DG standalone DB server
therefore the Oracle processes are checked
#History
#2001-03-01     rv      replace SAPSYSTEMNAME with DB_SID where appropriate, due to SDMS
#2000-11-14     rv      include begin/end messages from startsap
#1996-07-25     kgd     SQLNETV2 and SQLNETV1
#1996-07-11     ar      Sequent exceptions
#1996-06-11     kgd     SQLNET*V2 adaptions
#1994-12-7      mau     warning "Transport system not init." not only to
                      logfile but also to stdout
                      Project: 22C 241
#1995-07-25     dg      included check that caller is admuser
#====================================================================
FUNCTION: check_db_running
PURPOSE: check wheather db is runnig without R3trans
set returncode = 0 db available
    returncode != 0 db error
check_db_running()
in order to find out if the database is available
check whether the Oracle processes are running or not
echo "
" >> $LOG
echo `date` >> $LOG
echo "check if Oracle processes are running" >> $LOG
$PS | grep ora_[a-z][a-z][a-z][a-z]_${ORACLE_SID} > /dev/null 2>&1
if test $? -eq 0
then
    echo 'Database already running' >> $LOG
    returncode=0;
else
    echo 'database not available' >> $LOG
now check if sgadef exists
if a database connect fails but sgadef exists,
it is possible that there is a severe database problem
otherwise continue with startup procedure
    if test -f $ORACLE_HOME/dbs/sgadef$.dbf -o \
             -f $ORACLE_HOME/dbs/sgadef$.ora
    then
      echo "*** ERROR:Database possibly left running when system" >> $LOG
      echo "    went down(system crash?)." >> $LOG
      echo "    Notify Database Administrator." >> $LOG
      returncode=$error_dbnotavail
    else
      echo 'There are no Oracle processes running - ' >> $LOG
      echo 'Database is probably already stopped.' >> $LOG
      returncode=$error_dbnotavail
    fi
fi

Error while running Import Items program

Hi All,
I am getting error message "Item Catalog Group Descriptive Elements Open Interface import completed successfully for all records in this record set." when i am submitting Import Items Seeded program.
data is loaded into master organization successfully but no records were created in child organizations.
Apps version is 11.5.10.2
The same program with same code ran successfully a week back.
Any help is appreciated.
Thank You..

Duplicate thread (please post only once).
Error after submitting Import Items Seeded Program
Re: Error after submitting Import Items Seeded Program

Length error occured in IMPORT statement

Hello everyone,
i hv one requirment in PO print(ME23N). in po print asset no nt display without changing other format.
so that i first copy both smartform and driver program, in that i made certain changes such that i declare the patameter p_ebeln and i comment to data statement of p_ebeln & p_ebeln = nest-objky.
then i join asset no (anek-anln1) with the help of inner join. then in smartform i gave condition that if bsart = 'ZCAP'
wa_final-anln1 = gv_anln1.
endif.
i import gv_anln1 in smartform and exported in deriver program.
both are synthetically currect but when i gave print preview dump is occured.
length error occured in IMPORT statement
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
     not caught in
    procedure "%GLOBAL_INIT" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    During import the system discovered that the target object has
    a different length than the object to be imported.
what i do?

Hello,
can u send me coding for that?
program line is already created for that
and their first coding is like that,
if gv_bsart = 'ZCAP'.
wa_final-matnr = space.
endif.
and in text they fetch matnr no.
but as per requirement they want asset no when bsart = 'ZCAP'
how that asset no will come.
matnr comes there is bsart is other that ZCAP, but bsart = ZCAP they want asset no instead of matnr.

Length error occurred in IMPORT statement.

Hi All,
           while exexuting a program i got dump saying that Length error occurred in IMPORT statement. through ST22 i came to know that both import and export structres are not same. Import structure is longer than the export structure.
         I tried in SDN but i coudnt find any solution. can you please suggest how to solve this.
Thanks in advance,
Sreekala.

Hi,
Maybe what you can do si....
Program X
data: v_var(20) type c.
export v_var.
Program Y
data: v_var(20) type c,
         v_var2(50) type c.
import v_var.
v_var2 = v_var.
Create a variable that is exactly the same with the exporting parameter, then just assign it to a local variable declared in the 2nd program.
Hope this helps.
Benedict

Error occuring during import of certificate for SSO configuring in BI

Hi,
I am configuring the SSO with logon ticket for BI system.
I downloaded the certificate from portal server.
But while importing this certificate on R/3 server it shows error
"Error occurred during import"
Message no. TRUST008
Please suggest me any solution on it.
Thanks & Regards,
Vishal.

Hi Vishal,
Probably the certificate already exists - see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0077873d-0b01-0010-1abb-cfbf21d1aa43 page 4.
Hope it helps
Detlev

Getting error"Broker Client is no longer connected to the Broker Host"

HI Guruu2019s,
I'm trying to featch Data from SAP using IDOCs in Real Time Job. I have configured Real-time service ,Client Interface and RFC details successfully .also I start my Real-time service, it is showing green symble -" Weating for Idocs "
when start Idoc process from SAP system ,I'm getting below Error-
*"Broker Client is no longer connected to the Broker Host AGLSAPSBXARDDB1:4000"
Pls-2 give me the solution where is the problem -in sap side or BODS side and I hope you should have some solution
I'm doing wait for your response.
Thanks & Regards,
Rajeev kumar
SAP-BODS Developer

Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

Re: Error in submitting Import Standard Purchase orders from Pl/Sql

Hi All,
Iam using the following code to submit a concurret program
"Import Standard Purchase orders" from pl/sql
Program is sucessfully submittted but it is Completing in error status i am stuck there please help me in resolving this
My instance R12
My Code
======
DECLARE
v_request_id VARCHAR2 (100);
BEGIN
mo_global.set_policy_context ('S', 204); --org_id for the operating unit which the purchase order records belong too
mo_global.init ('PO'); -- sets the application
FND_GLOBAL.APPS_INITIALIZE (1013436, 50578, 201); --Consists of the user_id, responsibility_id, responsibility_application_id which is 201 for purchasing
v_request_id :=
fnd_request.submit_request (application => 'PO',
program => 'POXPOPDOI',
description => NULL,
start_time => NULL, -- To start immediately
sub_request => FALSE,
argument1 => '31348', -- Buyer_ID
argument2 => 'STANDARD', -- Doc Type
argument3 => '', -- doc subtype
argument4 => 'N', -- update items
argument5 => '', -- create sourcing rules not used
argument6 => 'INCOMPLETE', -- Approval status
argument7 => '', -- release generation method
argument8 => '1021387', -- batch_id
argument9 => '', -- operating unit null
argument10 => '', -- global agreement null
argument11 => '', -- enable sourcing null
argument12 => '', -- sourcing level null
argument13 => '', -- inv org enabled null
argument14 => '' -- inv org null
DBMS_OUTPUT.put_line ('Request submitted. ID = ' || v_request_id);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line (
'Request set submission failed - unknown error: ' || SQLERRM
END;
output
=====
when i check output i am getting the follwing error
DECLARE
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at line 133
Log message
==========
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
31348
STANDARD
N
INCOMPLETE
1021387
Start of log messages from FND_FILE
To get the log messages for PDOI, please use the following id to query against FND_LOG_MESSAGES table:
AUDSID = 945297
ORA-01403: no data found in Package po.plsql.PO_PDOI_PVT. Procedure init_sys_parameters.0
ORA-01403: no data found in Package po.plsql.PO_PDOI_PVT. Procedure init_startup_values.10
ORA-01403: no data found in Package po.plsql.PO_PDOI_PVT. Procedure start_process.50
User-Defined Exception in Package po.plsql.PO_PDOI_Concurrent. Procedure POXPDOI.30
End of log messages from FND_FILE
Thanks
Manoj kumar

Pass NULL instead of ''
Check the flag
SELECT multi_org_category
FROM fnd_concurrent_programs
WHERE concurrent_program_name = 'POXPOPDOI'Update it as per the below MOS Doc
R12 / POXPOPDOI - 'ORA-01422' Error While Running 'Import Standard Purchase Orders' [ID 457628.1]
Otherwise,
Follow the below doc and insert values to the interface tables (headers, lines and distribution) and run the Import Standard Purchase Orders from the front end.
How To Diagnose Problems With Importing Standard Purchase Orders [ID 781351.1]
HTH
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

Error in client import

Similar Messages

Maybe you are looking for