Error in commitment update in SO

Hi Experts,
While creating a sales order I am getting an error as " Error in commitment update. Status being set. The order can not be delivered/billed."
Please help me out.

Hi
Please can you provide more details like whether do you have any set up of commit codes for the material.
If so then, if you're delivering after the commit code date you may get error. And also please let us know whether you have any confirmed schedule line for the material you have used.
Thanks,
Veerendra

Similar Messages

Error in commitment update. Status is being set.

HI Experts,
I have this error during sales order creation
"Error in commitment update. Status is being set. The order cannot be delivered/billed."
The system here FMderive to get commitment item.
Is there any missing FI in the SO?
THanks.
Regards,
Clarice

Check and maintain the following settings:
All accounts the system finds in the SD sales order must be supplied with an existing commitment item.
The funds center and the funds must either be entered in the account assignment panel of the SD sales order or they must be derived.
For detail refer SAP Note 418471 - V1331 (Item & does not exist) / Funds Management.
Thanks & Regards
JP

Error with Commitment Update

Hi SD Gurus,
We are on platform ECC 6.0.
While going through the SD cycle we are facing certain issues.
While creating a quantity contract and trying to save it we get a pop up box "Error with Commitment Update".
Status is being set.
The order cannot be delivered / billed.
If I'm not saving it and going back to the screen we get the following error.
System error: Funds management update (LFMOIF01,ORGVG)
Message no. FI057
Please advise.
Thanks,
Rajbans

The software component EA-PS was updated to latest patch SAPKGPPD06 which resolved the issue.

Error- funds managment update

when i go to va02 and want to short close the order line item, i am getting the following error.
System error: Funds management update (DOUBLE KEY,FM_OPEN_ITEM_POST)
kindly let me know how to solve this error please.
regards
sathya

Your getting 2 Keys for FM FM_OPEN_ITEM_POST.
Check following link for understanding
No commitment item entered in item
Re: Error with Commitment Update
Thanks & Regards
JP

Error in commitment check - Message no V2225

Hi,
I have activated Fund Management and during posting of Sales Order I am getting the following ERROR.
"Error with commitment update
Status is being set
order can not be billed /delivered."
From SDN, I have seen a similar error and found solution as below:
"Check Note 676578 - Commitment check: Incorrect error message"
I have checked Note 676578 and seen that this note is applicable for Ver ECC 4.7 but we are using ECC 6.0
Can anybody please let me know what is the compatible Note to ECC 6.0 like 676578 for ECC 4.7
Any early response will be highly appreciated.
Regards
Rahkes

Hi Rahkes,
Usually this error message is issued when one of the FM account assignments is not filled.
Please check note 666322 and turn the trace of FMDERIVE at runtime. Make sure that the account assignment
is always determined according to your business needs.
Also please check your integration between SD and PSM-FM:
1) Check OFUP SD integration should be active
2) SD customizing settings for FM objects.
       You can set "fund center" as an optional entry in SD customizing settings for field status. This can be checked in the IMG path:
       SPRO -> Public Sector Management -> Funds Management Government-> Actual and Commitment Update/Integration -> Integration -> Maintain Field Status for Assigning FM Account Assignments
       You should have a record with Object type = '04' (sales order).
       It is not necessary to have the field as required (unless you want to insert it in the origin process) due to the fact that
       this can avoid the account assignment derivation between CO objects and FM objects.
       For more information, check note 572729.
I believe that you want this integration, but if you do not want to integrate sales order process within PSM-FM, you should consider to deactivate this integration in customizing transaction OFUP. In release EA-PS 1.10 and 2.00 modification note 591573 is available.
I hope this helps.
Best Regards,
Vanessa.

Commitment-update based on periodic base, based on delivery date. FI_E008

Hi gurus:
In our system, we are using profile update 000350.
The purchase orders consume budget based on delivery date.
When posting an invoice, it is necessary that the commitment reduction
(amount type 0200) is posted with the invoice posting date and not the
delivery date of the purchase order.
This requires defining that value type 51 takes commitment update based
on periods.
By selecting the commitment update based on periods, it is not possible
to determine the period by the delivery date. System displays an error
message FI_E008.
We need commitment-update to be based on periodic base, based on the
delivery date.
Could you help me. Thanks

Hi,
I don't think it's possible: PBET implies using posting date as basis date in the most cases. Tthere are some exceptions, but they don't apply to purchase orders (v.type 51).
Regards,
Eli

FRM-40509: ORACLE error : Unable to update the record.

Hi,
I am having the following code in delete button.
declare
     v_button NUMBER;
begin
IF :CHNG_CNTRL_JOB_DTLS.SENT_DATE IS NULL THEN
               v_button := fn_display_warning_alert( 'Do you want to delete the version ?');
               IF ( v_button = alert_button1 )
                    THEN
                      message('before insert');
                      insert into chng_cntrl_job_dtls_log
                      select * from chng_cntrl_job_dtls
                      where job_name = :CHNG_CNTRL_JOB_DTLS.job_name
                      and job_version_no = :CHNG_CNTRL_JOB_DTLS.job_version_no
                      and sent_date is null;
                      message('before delete');
                      delete from CHNG_CNTRL_JOB_DTLS
                      where job_name = :CHNG_CNTRL_JOB_DTLS.job_name
                      and job_version_no = :CHNG_CNTRL_JOB_DTLS.job_version_no
                      and sent_date is null;
                      message('before commit');
                      silent_commit;
                      go_item('CHNG_CNTRL_JOB_DTLS.JOB_NAME');
                      P_DELETE_SET_PROPERTY;
                      clear_form;
               ELSIF ( v_button = alert_button2 )
                    THEN
                      null;
            END IF;
     ELSE
            p_display_alert('Version '||:CHNG_CNTRL_JOB_DTLS.JOB_VERSION_NO||' for the job name '||:CHNG_CNTRL_JOB_DTLS.JOB_NAME||' cannot be deleted.','I');
END IF;
     exception
          when others then
          message ('Exception in delete version button');
          end;when i am trying to save it says " *FRM-40509: ORACLE error : Unable to update the record*." .
i am getting message till before commit.
i am not able to check the error message in help as it is diabled in our form builder.
I have checked the privileges also. they are fine.
Please advice.
Edited by: Sudhir on Dec 7, 2010 12:26 PM

This error does not come from your procedure code, but from Forms itself. If you are in a database block, change something, and do a commit (either via a Forms key or in your own procedure), Forms commits the changes. For some reason this is not possible. You can see the database error via the Display Error key (often Shift-F1).
I see in the OP that this key is disabled. Change the on-error code then:
begin
   message(dbms_error_code||'-'||dbms_error_text);
   raise form_trigger_failure;
end;     Edited by: InoL on Dec 7, 2010 8:50 AM

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

Error U44M1P7 while updating Photoshop CC

I got allways this error code while updating PS CC using Adobe Creative Cloud.
What do i do?
Harry

http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
Mylenium

Error U44M1l11 when updating Photoshop CC

I got this message when I try to update Photoshop CC: Error U44M1l11. Any idea?
Thks!

Take a look at this article:
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
Alessandro.

SCCM 2012 SP1 errors when downloading updates

Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
The Environment is:
Server 2008 R2
SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
trying to get it from. I then see the .1 removed from the directory name and there are updates within them.
Just for clarity here are the steps I go through from SCUP to Syncing...
Log in to WSUS server
Run SCUP as administrator
Get notified there are updates from Adobe and let SCUP download updates
Find the updates the specify the following publishing options
Full Content
Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
Then click Next
After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
What am I missing?
Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
then I waited, maybe 30 days or so before I could add the updates back in.
Thanks for the help!

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Have you seen the note at the bottom of this page about this error?
http://technet.microsoft.com/en-us/library/bb932193.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

There was a problem updating InDesign CC For more information see the specific error below. Update Failed Download error. Press Retry to try again or contact customer support.(49)

Posted the entire text from the error window, when trying to update, using the normal NON-TECHIE way to update any and all Adobe CC products, via the Creative Cloud updater installed when Adobe Creative Cloud subscription was purchased when first offered.
The following occurs, ad nauseam:
There was a problem updating InDesign CC
For more information see the specific error below.
Update Failed
Download error. Press Retry to try again or contact customer support.(49)
Here's the crux of my frustration:
(1) Customer Service is NOT contact-able, to receive LIVE help.
(2) There is NO way for me to mitigate this "Download error", being a student learning InDesign, and NOT in any way capable of tweaking folders/files here and there.
Therefore, the real question:
Given that a significant number of subscribers are having the above referenced issue with attempting to download the current update for InDesign, WHAT ARE WE SUPPOSED TO DO, in order to get our contractually paid-for updates to our legally and contractually paid-for Adobe software, specifically in my case, InDesgin's current update?
Please, NO TECHNICAL mumbo-jumbo which most likely will cause the overwhelming majority of users, like me, to seriously corrupt their computer files, but rather an honest, straightforward "what to do" from real CS/Engineers working for Adobe, as to how to FIX this issue, period.
===========================================================
UPDATE:
Here is a way in which I think I was able to "update" my InDesign CC application:
(1) Sign-In to your Adobe Account
https://www.adobe.com/
(2) Click on the MENU icon
(3) Click on the product InDesign icon
Your browser should display the page for Adobe InDesign CC
https://www.adobe.com/products/indesign.html?promoid=KLXLU
(4) Click on the Download icon,
Your browser should now display the page to download InDesign,
https://creative.adobe.com/products/download/indesign
(5) a Pop-Up window should open, and display:
Launch Application
This link needs to be opened with an application.
with the first option to select being the CreativeCloud(URIHandler)
(5) Select this application and click OK.
What happened when I followed steps (1) thorugh (5) is that:
(a) InDesign CC(2014) was installed,
(b) InDesign CC, updated, and then
(c) InDesign CC(2014), also updated.
Why this all worked, is a mystery to me.
Looks like a separate, "new" version of InDesign, InDesign CC(2014), was installed, the existing "old" InDesign was updated, and then the newly installed Indesign CC(2014) was further updated.
A BIT MORE, when I launched my InDesign CC app, and checked to see if there were Updates Available, there in fact was an Adobe InDesign CC 64 bit (9.2.2) update.
I clicked on UPDATE and my "old" InDesign CC app was "successfully updated."
FURTHER INFO: I may have neglected to list some important info ... OS: Windows 8.1 Pro with Media Center, 64-bit
Confused, I am able to launch BOTH of these apps, and hopefully I may use one of these versions of the InDesign CC app, to do some InDesign work.
Will keep y'all posted!
Message was edited by: Richard Yapkowitz, about an hour after I first posted this issue.

Jackdan error 49 indicates the installer was unable to access a critical file or directory. You can find additional details at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

'L_CHAVL_IN' Error while Activating Update Rules.

Hi All,
 when i am tring to activate my update rules, it is giving error, field "L_CHAVL_IN' in unknown. I dont have that field in my objects.
 i found that field in 'Progarm' for the update rules. that field is used in the exit of one of the feild in the update rules.
 Please give me a solution how to solve this.
Regards,
Ramana.

Check the following SAP Note (# 782858)
Symptom
When you activate the update rules, the system issues a syntax error: 'Syntax error: Field "L_CHAVL_IN" is unknown'.
Other terms
Syntax error; generation; l_chavl_in; update rules
Reason and Prerequisites
This is a program error. The error only occurs under the following circumstances:
You generate an optimized update rule;
An alpha conversion is required.
Solution
BW 3.0B
 Import Support Package 25 for BW 3.0B (BW3.0B Support Package 25 or SAPKW30B25) into your BW system. The Support Package will be available once note 0723254 with the short text, "SAPBWNews BW3.0B Support Package 25", which describes the Support Package in more detail, is released for customers.
BW 3.10 Content
 Import Support Package 19 for BW 3.10 (BW3.10 Support Package 19 or SAPKW31019) into your BW system. The Support Package will be available once note 0723261 with the short text, "SAPBWNews BW 3.1 Content Support Package 19", which describes the Support Package in more detail, is released for customers.
BW 3.50
 Import Support Package 10 for BW 3.5 (BW3.50 Support Package 10 or SAPKW35010) into your BW system. The Support Package will be available oncenote 0763336 with the short text, "SAPBWNews BW Support Package 10 NetWeaver'04 stack 10", which describes the Support Package in more detail, is released for customers.
Assign pts if helpful.

Error while schedulingg update stat in db13

Dear Experts,
Please look into my issue we are facing an error while scheduling update statistics in db13 and I tried to open detailed log
It is given
SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: program_start_error: For More Information, See SYS
Please help me how to solve this my error
Regards

Hi,
Check the owner for BRBACKUP, BRARCHIVE, and BRCONNECT in kernel,
these files should be with SIDADM, if not change the owner to SIDADM and rerun the update stats.
and also Refer the note 446172
Regards,
Ram

Error while transporting update rule.

Hi experts
I am trying to transport one update rule to production..
But it is ending with error code 8 n it is giving me following error :
      Errors when activating update rule XXX
      IC=0PP_DS03 IS=0CO_OM_OPA_6 error when checking update rules
Kindly tell me what need to be done now.
Regards
Swati

Hi Swati,
Before transporting the update rule, in the present scenario, you have to transport the infosource which contains the corresponding "0recordmode".
Whenever you transport anything into the quality or production, the list should be as followed in the given manner :
Seq No     Objects in Request
1     Package(DEVC), InfoArea(AREA), Application Component(APCO)
2     Function Modules
3     Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
4     Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
5     Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and
                Generic Data Sources(DataSrce Active Version(OSOA), ISMP, ISTS,DataSourceReplica (ISFS)
                and Tables (TABL)
6     Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
7     Update Rules(UPDR, ROUT)
8     Infopackages(ISIP)
9     Queries(ELEM)
10     Webtemplates(TMPL, BLTM, BPTM)
Just transport all your things in the above sequence, and it will be done successfully.
Also, remember there should not be any data in the corresponding infoprovider while you transfer the update rule, else it will fail.
Hope it helps,
Regards,
Neha.

Error in commitment update in SO

Similar Messages

Maybe you are looking for