Error in commitment update. Status is being set.

HI Experts,
I have this error during sales order creation
"Error in commitment update. Status is being set. The order cannot be delivered/billed."
The system here FMderive to get commitment item.
Is there any missing FI in the SO?
THanks.
Regards,
Clarice

Check and maintain the following settings:
All accounts the system finds in the SD sales order must be supplied with an existing commitment item.
The funds center and the funds must either be entered in the account assignment panel of the SD sales order or they must be derived.
For detail refer SAP Note 418471 - V1331 (Item & does not exist) / Funds Management.
Thanks & Regards
JP

Similar Messages

  • Error in commitment update in SO

    Hi Experts,
    While creating a sales order I am getting an error as " Error in commitment update. Status being set. The order can not be delivered/billed."
    Please help me out.

    Hi
    Please can you provide more details like whether do you have any set up of commit codes for the material.
    If so then, if you're delivering after the commit code date you may get error. And also please let us know whether you have any confirmed schedule line for the material you have used.
    Thanks,
    Veerendra

  • Error with Commitment Update

    Hi SD Gurus,
    We are on platform ECC 6.0.
    While going through the SD cycle we are facing certain issues.
    While creating a quantity contract and trying to save it we get a pop up box "Error with Commitment Update".
    Status is being set.
    The order cannot be delivered / billed.
    If I'm not saving it and going back to the screen we get the following error.
    System error: Funds management update (LFMOIF01,ORGVG)
    Message no. FI057
    Please advise.
    Thanks,
    Rajbans

    The software component EA-PS was updated to latest patch SAPKGPPD06 which resolved the issue.

  • Payable status is being set as SP and the TL_PYBL_REASON_CD is being set as Payroll not Processed (PNP)

    Hi All,
    Have you come across any scenarios where the Payable status is being set as SP and the TL_PYBL_REASON_CD is being set as Payroll not Processed (PNP) in Peoplesoft Time and Labor 9.0 application?
    Thanks & Regards,
    Allen

    Hi All,
    Have you come across any scenarios where the Payable status is being set as SP and the TL_PYBL_REASON_CD is being set as Payroll not Processed (PNP) in Peoplesoft Time and Labor 9.0 application?
    Thanks & Regards,
    Allen

  • Prevent User Status from being set by System Status

    Hello,
    I wonder if there is a standard way to prevent  setting some User Status as long as activity network is not released.
    Thanks in advance,
    Best Regards.
    Nir

    Hi Nir,
    Go through the link mentioned below,
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/a9/8a853488601e33e10000009b38f83b/frameset.htm
    Once you have read it thoroughly create a user status. Dont forget to select the object types for which this user status should work. Once you have created the user status, in the business transactions list, for the transaction Release check the radio button under Forbidden. This should fulfill your requirement. When you assign this user status to a Network or an activity it should prohibit the release transaction.
    Hope this helps.
    Best Regards,
    Gokul
    Edited by: Gokul on Jan 14, 2010 9:53 AM

  • Error in commitment check - Message no V2225

    Hi,
    I have activated Fund Management and during posting of Sales Order I am getting the following ERROR.
    "Error with commitment update
    Status is being set
    order can not be billed /delivered."
    From SDN, I have seen a similar error and found solution as below:
    "Check Note 676578 - Commitment check: Incorrect error message"
    I have checked Note 676578 and seen that this note is applicable for Ver ECC 4.7 but we are using ECC 6.0
    Can anybody please let me know what is the compatible Note to ECC 6.0 like 676578 for ECC 4.7
    Any early response will be highly appreciated.
    Regards
    Rahkes

    Hi Rahkes,
    Usually this error message is issued when one of the FM account assignments is not filled.
    Please check note 666322 and turn the trace of FMDERIVE at runtime. Make sure that the account assignment
    is always determined according to your business needs.
    Also please check your integration between SD and PSM-FM:
    1) Check OFUP SD integration should be active
    2) SD customizing settings for FM objects.
           You can set "fund center" as an optional entry in SD customizing settings for field status. This can be checked in the IMG path:
           SPRO -> Public Sector Management -> Funds Management Government-> Actual and Commitment Update/Integration -> Integration -> Maintain Field Status for Assigning FM Account Assignments
           You should have a record with Object type = '04' (sales order).
           It is not necessary to have the field as required (unless you want to insert it in the origin process) due to the fact that
           this can avoid the account assignment derivation between CO objects and FM objects.
           For more information, check note 572729.
    I believe that you want this integration, but if you do not want to integrate sales order process within PSM-FM, you should consider to deactivate this integration in customizing transaction OFUP. In release EA-PS 1.10 and 2.00 modification note 591573 is available.
    I hope this helps.
    Best Regards,
    Vanessa.

  • Error- funds managment update

    when i go to va02 and want to short close the order line item, i am getting the following error. 
    System error: Funds management update (DOUBLE KEY,FM_OPEN_ITEM_POST)
                                                                                    kindly let me know how to solve this error please.
    regards
    sathya

    Your getting 2 Keys for FM FM_OPEN_ITEM_POST.
    Check following link for understanding
    No commitment item entered in item
    Re: Error with Commitment Update
    Thanks & Regards
    JP

  • I am getting an un expected error message when updating the setting to "extend network".  Is there an obvious setting I may be missing?  Cisco router being used.

    I am getting an un expected error message when updating the setting to "extend network".  Is there an obvious setting I may be missing?  Cisco router being used.

    If you are trying to "extend" using wireless only, you may not be aware that Apple designed the "extend" feature as a proprietary setting to only work with other Apple routers.
    It is extremely unlikely that this will work with a Cisco router.
    If your plans call for connecting the AirPort Express to the Cisco router using a wired Ethernet connection, it should be possible to configure the Express that way.

  • InfoPackage error message "Subsequent update (requests) : Status unknown "

    After running an InfoPackage the status is set to green, but when you look at the Details tab you see an error message "Subsequent update (requests) : Status unknown "  and "With DTP in InfoProvider ZHRPYO00 : Further processed " under it. We did not used to get this error message and don't quite understand why are we getting it now. Could someone explain, please?
    Thanks!
    Luda

    Hi,
    Usually this error could be while loading the DSO or loading DSO first and then to other infoprovider.
    Error message tab at the monitor should give you clear error message where it went wrong. check this tab.
    some time while activating the data this may fail for the DSO object. or some time due to authorization problem to load the data automatically from the DSO to infocubes.
    If possible let me know what is error message.
    Regards,
    Vishwa.

  • I can not update CC aps - I get the error message regardless of the ap being update

    I can not update CC aps - I get the error message regardless of the ap being update:  There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
    I have been trying to update a set of aps for a few days - never works.  I've tried sitting with the machine and monitoring the progress.  I've turned off my McAfee firewall.
    Any suggestions?
    Thanks
    Wes

    You must be connected to wifi.
    iOS will not update over a cellular connection.

  • Upgraded to 10.3.1.55, now can't set iT as default player,"An error occurred when updating the default player for audio files types.  You do not have enough access privileges for this operation." How to fix?

    After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player.  It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types."  I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem.  Any suggestions?  Thanks.
    J

    Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

  • I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

    I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

    I am not sure what you mean by "Flash Player for steam"; the only Flash Player installers I know is the ActiveX (for Internet Explorer) and the plugin (for other browsers); you can find both at http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
    [topic moved to Flash Player forum]

  • After the Firefox update this week (Sept 7?) links from emails won't open. I get an error message. So I've temporarily set IE as my default browser, and the links work.

    After the Firefox update this week (Sept 7?) links from emails won't open. I get an error message. So I've temporarily set IE as my default browser, and the links work.

    Hi everyone, I have Snow Leopard 10.6.8. I have been very very frustrated by this problem. [I could not create new windows, and anything that opens new windows, such as trying to see what Add-ons you have etc would not work]. I read about changing screen alignment to the top... I have one screen so the option does not exist. The above messages would not fix this problem. I searched hard and did find a solution in the end. I read stuff about removing Add-ons until the problem is fixed, but its simply not the case.
    First of all open Firefox. next go to options: Help --- 'Restart with Add-ons disabled'. Tick the box for add-ons, restart firefox. Next go to Tools --- Add-ons. Next (In the Add-ons Manager' click on 'Plugins' on the left hand side pane. Look for the small blue writing that says 'Check to see if your plugins are up to date'.
    Now notice it should say 'Missing Flash'. "For your safety, Firefox has disabled your outdated version of Flash. Please upgrade to the latest version". I followed this, reinstalled Flash and it now works as it always did, no problems. For people where the above fix didn't work, try this one out. Hope it helps people!
    :o)

  • Set on which day of the week to receive the Update Status Summary

    Hi all,
    currently it is set to weekly, i received on Friday. Is it possible to be change this day to be different? For example Monday, or Saturday? Thanks in advance
    WSUS version 3.2.7600.226

    The weekly Update Status Summary is driven by when you originally configured the "Send status reports" option. The report will be generated on the day-of-week that you enabled the option.
    To reset (set) the desired day of week, disable the notification functionality, and then re-enable it on the day you want the report sent.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Qty Contract Issue - Completed but Status still "Being Processed"

    Hello,
    I need help with a situation I am encountering.  This is AFS specific.
    Create QTY Contract for 100.  Both the item and schedule like have completion rule "B" and the copy control between contract and order has document flow set to "2" and positive.
    Scenario 1:
    If I create a call off order for exactly 100 (same grid value), the contract is correctly set to COMPLETE.
    Scenario 2:
    If I create a call off order for 50 and another call off order for 50, the contract status is  BEING PROCESSED.
    We need the contract status in the second scenario to be changed to "COMPLETED". 
    Thank you,
    Siobhan

    Hai Siobhan,
    In our system i created similar contract and sales orders, but both are showing completed only.
    1. Can you check again with complete cycle up-to invoice.
    2. After creating 50 + 50 two orders, Check whether system is allowing to create further more orders
    Please post the updates of the issue.
    Regards,
    Mani

Maybe you are looking for