Error in COPA Delta

Hi,
While I was trying to change the Timestamp of a COPA Delta load to a previous load in transaction KEB5, I got the following Error Message:
"Master Record for Datasource 1_CO_PA800IDEA_AC is defined for generic delta Read
Timestamp could not be set"
What might be the possible reason for such a Error Message. Could anybody help me in this regard ???

Please get me the solution for this particular scenario.
Let us suppose that i created the datasource some 1 year back and running the deltas successfully since then.
Let us number the requests from 1,2,3... and so on since 1st jan 2009. And let us suppose each request loads
some 1000 records everyday from ECC to BI.
Now on 10th august some change was made to ECC( such as change in the User Exit ) that caused the mismatch in number of data records ( loading only 950 records ) since the change was made on 10th August. But I identified the problem on 17th august with request number 160. Let us say those request numbers are 153(10th),154(11th),155(12th),156(13th),157(14th),158(15th),159(16th),160(17th). I fixed the program in ECC on 17th and further the requests from request number 160(17th) are fetching the correct number of data records. Now I need to delete the data in BI for request numbers 153 till 159 since they are not reconciling the data of ECC with BI. Now we reload the deltas for such requests from ECC to BI. So how do I reload the deltas now in this scenario since ECC system keeps track of the last delta ie.. on 17th august(Req no 160). But how do I Load the deltas from req number 153 to 159 from ECC to BI.
One proposed solution to this problem was setting the timestamp of COPA to 10th august. But it is not advised to set the timestamp for COPA datasources using the KEB5 transaction in a production system.
Now in this scenario how do I load the request numbers 153 to 159 from ECC to Bi to fetch the correct data records for that period. Please propose a solution for this problem ASAP. U can also call me back whenever u need.
Thanks in advance

Similar Messages

Short dump error when extracting delta records from R/3

I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
Below is the error message
Kindly do the needful ASAP.
Job started
Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0ISCM_PAYMENT_01
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000000000                              *
abap/heap_area_total.......... 2000000000                              *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500000                                 *
ztta/roll_extension........... 2000000000                              *
2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled

Hi,
I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
Another option is to look at OSS notes, because the error is giving you a standard extractor.
Greetings,

Standard and generic COPA delta

Hello
I dont understand why many people say standard copa delta , generic copa delta.
COPA is a generated application and delta should be generic.
What do you mean when you are talking (many posts in this forum) about standard copa delta?
Thanks

Hi,
Copa extraction is generated application based on the operating concren configured in R/3 system. and same applied to delta process.
R/3 table TKEBWTS contains information about the COPA load requests that have been posted into BW. time stamp entries in this table can be maintained to reintialize the delta. this may be the reason some may call in generic or standard delta.
Dev

What does mean the error "System status DELT is active"?

Hi Gurus,
Can somebody tell me what does mean the error "System status DELT is active"?

Hi Disha,
I m getting the same message while trying to update the contract using FM "bbp_pd_ctr_update".
When I go and check the Item or header it is not marked for Deletion. Is there any table or field which indicates that it is marked for Deletion.
Any help on this is highly appreciated.
Regards
Surender

Runtime error during COPA-Ext

Hi Guys
I am new to SAP BW.
I am trying to schedule an initial load but I end up getting the following error message.
This is an extract from the dump.
call function 'RSAN_LOGSYS_DETERMINE'
        destination g_dest
        exporting
          i_client = l_s_desdisp-rfcclient
        importing
          e_logsys = l_rfclogsys.
      if l_rfclogsys <> p_logsys.
        message x000.
      endif.
    endif.
the p_logsys has my correct system name, but l_rfclogsys has some other name.
The Data flow shows a smooth data flow from the dATA source to my infocube and all transfer/update rules are active. The source system is connected succfully to the bw system. (I replicated succfully).
The strange thing is when I perform a delta upload on older packages, there is no dump!!
Can some one please help!!!!!! Points assured
Thanks and Regards
Sameer

Hi,
where do you get this error? I believe in your source system. If yes, I think you have some records posted in your COPA-tables that correspond to a logical system that doesn't exist anymore. Did you rename the logical system? Did you copy your system from another system?
regards
Siggi

Copa delta problem

Hi All,
I enhanced the copa DataSource by adding the new value field,then i have loaded the data
Initial Load without data transfer then run the delta update it is give ZERO records.
When i checked in COPA table level and KE24 report level in r/3 side data is there.
Is there any problem in my delta.If is there delta problem where to check and how to resolve this.
Please help me ASAP.
Thanks in advance.
prasantha

HI Sathish,
Based on in your information i have checked in KEB2 it is giving the below error.can you help wht is this
and how to resolve this error.
the below error is keb2 tcode(based on below error i have one doubt delta is geting the data into
head level data.
Subsequent time stamp information only has statistical character.
The time stamp relevant for reading data is found in the header information for the
DataSource.
For data extraction from several BW systems, the number of records read and sent that is
displayed does not have to agree with the actual number (due to Service API logic).
Delta init simulations are not listed in the overview because the CO-PA extractor
is not called in this case and it consequently does not update any log entry.
Thanks and regards,
kumar.k
Edited by: kumar reddy on Jan 20, 2009 8:10 AM

Error when loading delta update from DSO to cube

hi Experts,
I am loading a delta DTP, get dat by requests from an dso to a cube, while doing that encounter an error :
"Exception CX_RS_ERROR occurred (program: CL_RSTRAN_RUNTIME_EXE=========CP,
include: CL_RSTRAN_RUNTIME_EXE=========CM001, line: 210). "
Any pointers ?
Thanks.
Sharat.

Hi Sharat,
We are getting the following error while loading data form DSO into InofCube.
Exception CX_RS_ERROR occurred (program: CL_RSTRAN_RUNTIME_EXE=========CP, include: CL_RSTRAN_RUNTIME_EXE=========CM001, line: 231).
Message no. RS_EXCEPTION000
Please help us in resolving this.
Thanks,
Shalin

Error while doing DELTA Extraction

Hi BW Experts,
In my R/3, I have a generic data source ZBUT_VW.
It receives data from a View which is created based on couple tables.
When I do full load to the corresponding ODS, it is successful.
But after that I delete the ODS and created CUBE with DELTA
I have Initialized delta.
When I do DELTA extraction, it fails.
The error
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
I delete the initialization load and trying to do DELTA extraction again and it Fails With the same error
Please let me know how can I resolve this problem.
URGENT
gaurav

I dont think it is possible to have to additive delta with creation date.
Try a full load to cube to check if the extractor is working.

Error while doing DELTA Extraction (generic data source)

Hi BW Experts,
In my R/3, I have a generic data source ZBUT_VW.
It receives data from a View which is created based on couple tables.
When I do full load to the corresponding ODS, it is successful.
But after that I delete the ODS and created CUBE with DELTA
I have Initialized delta.
When I do DELTA extraction, it fails.
The error The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
I delete the initialization load and trying to do DELTA extraction again and it Fails.
With the same error
Please let me know how can I resolve this problem.
URGENT
gaurav

I dont think it is possible to have to additive delta with creation date.
Try a full load to cube to check if the extractor is working.

Error while loading Delta

Hi,
I have loaded in process chain a ODS in Delta, the load was not successfull it went in error stating that : "The last delta load is still running; no new request possible" and so i deleted the request from manage. But still its showing the same information when i open the infopackage.
wat can be done to load the data in Initialize Delta Process.
Regards,
Poomagal.

Hi Poomagal,
This is due to mismatch in the Delta Queue.
u might have missed a delta before this request which has failed. Its stating that "The last delta load is still running; no new request possible". This means that there is a previous request which has not loaded in the target.
Just check in PSA or in DataSource Manage tab whether there is request which has not been loaded in the target.
If u find any request then load that request first and then repeat the failed request.
U need to make the QM Status manually red even if its red in RSMO as well as in Manage tab of the target before deleting the request from the target. and then when u start the info package it will give a pop up as Repeat of last delta again. If it doesnot give then it wont bring the delta load which has failed.
Thanks,
Nagesh.

Error while enabling Delta on HCM_Stageing_Area

Hi,
I'm reading an Import File and trying to enable delta. Unfortunately it fails with following error messages:
Error inserting entry in delta. DN:
java.sql.SQLException: ORA-01400: cannot insert NULL into ("MXMC_OPER"."LOGENTRIES"."DN")
And:
Error selecting record in delta. SQL:SELECT operation, entid, changejob FROM logentries WHERE dn=? AND ownerid=? DN:
IdM is running on Windows 2008 R2 and its database on Oracle 10.2.
On Win2k3 and MSSQL it is running smoothly.
Any idea will be helpful.
Thanks
Christos

Hi Christos,
have you checked the connection strings within the identity Center?
It's just a guess, but it seems that the password of the mxmc_oper-user is missing.
Kind regards,
achim

Error while implementing Delta Load

Hello Experts,
I need your help.
I am trying to extract data from SAP R/3 to BI system.
The R/3 system contains data from 1999-2008 fiscal year. I extracted data for fiscal yr 2007,2006 and 2005 successfully and created a delta info package
In the delta info package I didn't specify any fiscal year limit under the Data selection tab.
I started a background job which needs to run daily. Now my issue is the load came up with an error stating time limit exceeded. I believe the number of data packets exceeded. The request showed a warning sign and it got stuck there. I tried to delete that request and consequently delete the whole delta info package and creating a delta package freshly.
But when I tried to start the process of extraction, the following message popped up. Please tell me what I need to next.
Init. select. for field name currently running in request REQU_464F7XQP5TZIEJPIS0MUV32IB
Message no. RSM1070
Diagnosis
Init. selection for field name with the 'From value' and the 'To-value' , is currently running in request REQU_464F7XQP5TZIEJPIS0MUV32IB.
Procedure
Wait until the init. selection is completed; check the load status in the Monitor.
Thank you. Appreciate your help.
Raj

Hello guys,
I tried to delete the delta request by right clicking on the infopack and hitting manage, and then selecting the particular request and hitting delete.
But when I tried to create a new infopack and initialize it it constantly gave me the same error saying that I need to delete the previous request.
There is another place where you need to delete the request from.
You need to double click on the delta infopackage and on the top menu click on
Scheduler > Initialization options for Source System > Now select the particular delta request and delete it.
This solves the problem and helps you to reintialize the delta load using the new delta infopackage

Error while doing Delta using 0FI_AA_11 ..

Hi Experts,
I am trying to load ODS : 0FIA_DS11 (Transactions (Delta) using standard datasource : 0FI_AA_11 (FIAA: Movements).
When I am trying to load I am getting following error :
" <b>Extraction of 0FI_AA_11 not possible. Extract 0ASSET_AFAB_ATTR first BWFIAA 4"</b>
I have already loaded 0Asset_afab, both texts and attributes and activated.
Also I have activated : BAdi: <b>FIAA_BW_DELTA_UPDATE</b> in R/3, which SAP Help says we need to activate it.
This error comes only when i tryig to do Delta or Init with data trsnfer.Init without data transfer and full load works fine.Also RSA3 shows record.
Any Help wud b appreciated and rewarded by points!!
Thanks!!
Sorabh

Please load master data first that load 0ASSET_AFAB_ATTR first and some other master data and then load the ODS 0FIA_DS11.
Hope it helps.....

Error while Doing Delta upload

Hi,
While loading the deltas in SD Module we are getting the error that 'No SID value for 0BILLTOPRTY and 0SOLD_TO'. We already run the delta for Customer.
Even though we are able to see that record in customer, we are getting the error.
Thanks&Regards,
Ganga Bhavani

Hi Bhavani,
Try to activate the customer master data and run attribute change run for customer.
Hope it Helps
Srini

Unknown error message at delta load

We are working with the IPC 3.0, SP17 in a stand alone version. For data loading we are using always the initial load. Since the condition data get more and more, it needs to much time for loading that with the initial load and we want to use the delta load now. When I have made the customization in the R3 system, now I have the problem that I get always the following error messages:
java.lang.Exception: A901 is not existing in global scheme. (A901 is a customer condition table, but for SAP tables I get the error message, too)
java.lang.Exception: Specified source/destination Type doesn't exist in Scheme
I do not found any documentation about this error messages.
Can someone help me ?

It's an error in some third-party software you installed, possibly called "Remote Advisor."

Error in COPA Delta

Similar Messages

Maybe you are looking for