Error in counting.

Hi,
I am using the measure buffered period vi from LV 6.0 to measure the time averaged period of a square wave. I am using the signal as the gate and the internal clock as the timebase with a frequency of 100KHz. The problem i am having is that the VI does not produce the right output. About 60% of the time the value is right but the other 40% it is wrong and it seems that it is missing a pulse from the signal and counts double the period/ half the frequency. I am not sure why this is happening. Also this error gets worse as i increase the time base. I have grounded the signal appropriately so that shouldnt be an issue. Is there any way to rectify it? Is there some technique using the other counter i have on the board (pci-6052e) to resolve this.
Thanks in advance,
Shyam Menon.

Hi Shane,
I should have done this before but i am posting a section of my code now. The top parts are about scanning the analog channels connected to my scxi 1120 module and the bottom part is for scanning the counter pin. Since i read the pci-6052e has 3 dma modules, i shouldnt hopefully have problems with data transfer. Another thing i found is that i need to have sufficient delay time in the read buffer vi so that all the data gets written to the file otherwise i am missing some of the data. Hope this helps you to understand my problem better.
Thanks,
Shyam.
Attachments:
Mod_Engine_VI.vi ‏131 KB

Similar Messages

  • Table creation Error "Ref Count for this object is higher than 0"

    Hi All
    I have a problem in creation of table using SDK on a button event.  I have a procedure to create tables and fields. If I call this procedure on a menu Event than it works fine but If I call this procedure on a button event than It gives error "Ref count for this object is higher than 0" . I know this error occur When an object does not release after creating a table. but this error occur at when first table is created. My code it given below. plz see and give me your valuable suggestions.
      Dim oUserTablesMD As SAPbobsCOM.UserTablesMD
                Try
                    oUserTablesMD = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                    oUserTablesMD.TableName = "AM_OBIN"
                    oUserTablesMD.TableDescription = "PutAway Table"
                    oUserTablesMD.TableType = BoUTBTableType.bott_Document
                    lRetCode = oUserTablesMD.Add
                    '// check for errors in the process
                    If lRetCode <> 0 Then
                        B1Connections.diCompany.GetLastError(lRetCode, sErrMsg)
                        MsgBox(sErrMsg)
                    Else
                        B1Connections.theAppl.StatusBar.SetText("Table: " & oUserTablesMD.TableName & " was added successfully", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success)
                    End If
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
                    oUserTablesMD = Nothing
                    GC.Collect()
                    oUserTablesMD = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                    oUserTablesMD.TableName = "AM_BIN1"
                    oUserTablesMD.TableDescription = "PutAway Upper Grid"
                    oUserTablesMD.TableType = BoUTBTableType.bott_DocumentLines
                    lRetCode = oUserTablesMD.Add
                    '// check for errors in the process
                    If lRetCode <> 0 Then
                        If lRetCode = -1 Then
                        Else
                            B1Connections.diCompany.GetLastError(lRetCode, sErrMsg)
                            MsgBox(sErrMsg)
                        End If
                    Else
                        B1Connections.theAppl.StatusBar.SetText("Table: " & oUserTablesMD.TableName & " was added successfully", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success)
                    End If
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
                    oUserTablesMD = Nothing
                    GC.Collect()
                Catch ex As Exception
                    MsgBox(ex.Message)
                End Try
    Thanks
    Regards
    Gorge

    Hi Gorge,
    The "Ref count error..." usually occurs in case of Meta Data objects not being properly cleared.  And yes, you have got the error in the right place, generally while creating tables / fields / UDOs.  For this, you just need to clear the Meta Data object (At times even DI objects like Record Set) once they are used.
    Eg: Release these objects in the below way in a Finally Block.
    System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
    Hope this helps.
    Regards,
    Satish

  • Error: Ref count for this object is higher then 0

    Hello All,
    I am trying to create User Defined Tables in SAP through Coding but while running the code the error "Ref count for this object is higher then 0 " is showing .
    I have created a temporary table in which the Table Description are stored as follows :-
    Create Table Test_Table (TblCode Varchar(30),TblName Varchar(100),TblType int)
    From this table then using recordset i am getting the table details for creation :-
    oRecord.DoQuery("Select TblCode,TblName,TblType From Csv_UDT")
                While Not oRecord.EoF
                    Dim Table_Id As String = oRecord.Fields.Item("TblCode").Value
                    Dim Table_Name As String = oRecord.Fields.Item("TblName").Value
                    Dim Table_Type As integer = oRecord.Fields.Item("TblType").Value
                    Dim oUserTablesMD As SAPbobsCOM.UserTablesMD
                    oUserTablesMD = Class_OprTbl_Main.ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                    '// set the table parameters
                    oUserTablesMD.TableName = Table_Id
                    oUserTablesMD.TableDescription = Table_Name
                    oUserTablesMD.TableType = Table_Type
                    lRetCode = oUserTablesMD.Add
                    If lRetCode <> 0 Then
                        If lRetCode = -1 Then
                        Else
                            Class_OprTbl_Main.ocompany.GetLastError(lRetCode, sErrMsg)
                            Class_OprTbl_Main.SBO_Application.MessageBox(sErrMsg + oUserTablesMD.TableName)
                        End If
                    End If
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
                    oUserTablesMD = Nothing
    But while running this code the error is coming .
    How to solve this error ........
    Thanks,
    Amit

    First of all, you are not meant to create temporary table in SAP database. SAP have never made an official announcement, but I think they would not be too happy if they saw it and may withdraw support. Just something to be aware of.
    Secondly, your error is very common and you would have found the solution by searching the forum. It is caused by having an open recordset while trying to use a metadata object.
    You will have to change how your code works. You can not use the UserFieldsMD or UserTablesMD object while you have an undisposed recordset object.
    -1120 - Ref count for this object is higher then 0
    Ref count for this object is higher then 0
    Error: Ref count for this object is higher then 0
    Meaning of Error Msg: "Ref count for this object is higher than 0"
    The solution is you must dispose of any recordset object before attempting to use the UserTablesMD object:
    System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet)
    oRecordSet= Nothing
    GC.Collect()
    GC.WaitForPendingFinalizers()

  • External table causing error on count(*)

    I created an external table, when i do count(*) from the table
    it is giving me the error :
    ERROR at line 1:
    ORA-29913: error in executing ODCIEXTTABLEFETCH callout
    ORA-29400: data cartridge error
    KUP-04018: partial record at end of file
    here is my definition for the file :
    CREATE TABLE ext_tab
    TYPEVENDORCODE VARCHAR2(4000 BYTE),
    VENDORCODE VARCHAR2(4000 BYTE),
    WRKCODEWRKDONEFHA VARCHAR2(4000 BYTE),
    FILLER4 VARCHAR2(4000 BYTE),
    TYPECODEVENDOR VARCHAR2(4000 BYTE),
    FILLER6 VARCHAR2(4000 BYTE),
    FILLER7 VARCHAR2(4000 BYTE),
    TYPE VARCHAR2(4000 BYTE),
    FILLER9 VARCHAR2(4000 BYTE),
    COST VARCHAR2(4000 BYTE),
    PHOTOS VARCHAR2(4000 BYTE),
    SUBJECTTODISCOUNT VARCHAR2(4000 BYTE),
    FHAREGION VARCHAR2(4000 BYTE),
    AVERAGECOST VARCHAR2(4000 BYTE),
    FILLER15 VARCHAR2(4000 BYTE),
    FILLER16 VARCHAR2(4000 BYTE),
    FILLER17 VARCHAR2(4000 BYTE)
    ORGANIZATION EXTERNAL
    ( TYPE ORACLE_LOADER
    DEFAULT DIRECTORY dir1
    ACCESS PARAMETERS
    ( RECORDS FIXED 512
    SKIP 1
    READSIZE 3840000
    BADFILE 'STG0_FILE71_EXT.BAD'
    LOGFILE 'STG0_FILE71_EXT.LOG'
    FIELDS TERMINATED BY 0x'0A'
    NOTRIM
    MISSING FIELD VALUES ARE NULL
    REJECT ROWS WITH ALL NULL FIELDS
    typevendorcode CHAR(4000),
    vendorcode CHAR(4000),
    wrkcodewrkdonefha CHAR(4000),
    filler4 CHAR(4000),
    typecodevendor CHAR(4000),
    filler6 CHAR(4000),
    filler7 CHAR(4000),
    type CHAR(4000),
    filler9 CHAR(4000),
    cost CHAR(4000),
    photos CHAR(4000),
    subjecttodiscount CHAR(4000),
    fharegion CHAR(4000),
    averagecost CHAR(4000),
    filler15 CHAR(4000),
    filler16 CHAR(4000),
    filler17 CHAR(4000)
    LOCATION (dir1:'abc.DAT.raw')
    REJECT LIMIT UNLIMITED
    NOPARALLEL
    NOMONITORING;
    any thoughts?
    billu

    I don't think there is any way to modify your table definition to accommodate the (apparent) fact that missing values generate nothing in the file you want to load.
    It seems that you are saying that the format of the file is not actually fixed in any way, that is has some, but not all values, and that mising values are just skipped.
    Assuming for a moment that the fields are delimited bt a pipe symbol (|) then it seems to me that you have this situation :
    Defined file format:
    ID|name|age|addresswhich would imply the file should look like:
    123|John|42|123 MainSt.
    456|Fred|39|45 Pine St.but sometimes you get:
    12345|27|12 Elm St.If this is the case, there is no possible way that the file can be reliably parsed since there is no consistnet format. If field values could be missing, you need to get whoever generates the file to do something more like:
    12345||27|12 Elm St.That is, put in the field delimiters even if there is no value for the field.
    John

  • How to solve the error "Ref Count for this object is greater then 0"

    Hi,
    I'm trying to add UDF at runtime to an already created UDT which is of No Object Type.
    my code is as follows:
    dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
    oUserFieldsMD = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
    oUserFieldsMD.TableName = "@TI_ADDCODES"
    oUserFieldsMD.Name = codetoinsert
    oUserFieldsMD.Description = desctoinsert
      'Add the field to the table
       lRetCode = oUserFieldsMD.Add
       If lRetCode <> 0 Then
       ocompany.GetLastError(lErrCode, sErrMsg)
       MsgBox(sErrMsg)
        Else
        MsgBox("Field: '" & oUserFieldsMD.Name & "' was added successfuly to " & oUserFieldsMD.TableName & " Table")
        End If
    I got error msg as "Ref Count for this object is greater then 0" and error code is -1120
    how to rectify it?
    Thanks in advance!!!

    Hi,
    Have you searched the forum? You may check this first: error -1120 when adding UserTableMD.
    Thanks,
    Gordon

  • MSS Error Page Counter is not set.

    Hi,
         I am using EP 7.01 and ECC 6.0 I am getting error in MSS-->Inbox and selecting the option PCR  contract agreement generation ,then getting the error like Page counter is not set. How to resolve this error? Can someone give the solution?
    Thanks,
    Kundan

    Goto--> Main Program.
    Then Goto->Attributes.
    You can change the unicode checks active flag here

  • 1086  Syntax Error (on Counter.fla)

    Can anyone elaborate as to why I am getting an error with
    this "counter script" (counts down Years, Months, Days, Hours,
    Minutes, Seconds)? The error is "
    1086: Syntax error: expecting semicolon before months" (Line
    50), but after doing research on the error number and looking at
    the actual error line, it appears that it may be something other
    which I am not seeing?
    HERE is the Action Script I am using:
    this.addEventListener(Event.ENTER_FRAME,onEF);
    function onEF(evt:Event):void {
    var today:Date = new Date();
    var currentYear = today.getFullYear();
    var currentTime = today.getTime();
    var targetDate:Date = new Date(2011,10,16);
    var targetTime = targetDate.getTime();
    if (targetTime - currentTime > 0) {
    var timeLeft = targetTime - currentTime;
    } else {
    var timeLeft = currentTime - targetTime;
    var sec = Math.floor(timeLeft/1000);
    var min = Math.floor(sec/60);
    var hrs = Math.floor(min/60);
    var days = Math.floor(hrs/24);
    var months = Math.floor((H+L-7*M+114)/31);
    var years = Math.floor(days/365);
    sec = String(sec % 60);
    if (sec.length < 2) {
    sec = "0" + sec;
    min = String(min % 60);
    if (min.length < 2) {
    min = "0" + min;
    hrs = String(hrs % 24);
    if (hrs.length < 2) {
    hrs = "0" + hrs;
    days = String(days);
    if (days.length < 2) {
    days = "0" + days;
    months = String(months % 12);
    if (months.length < 2) {
    months = "0" + months;
    years = String(years);
    if (years.length < 2) {
    years = "0" + years;
    var counter:String = years + ":" months + ":" days + ":" +
    hrs + ":" + min + ":" + sec;
    time_txt.text = counter;
    }

    Thanks,
    kglad, for the quick and helpful response...
    I can't believe I didn't see that!
    Seems now I am getting another error on Line 22 -
    1120: Access of undefined property H, L, and M.
    Trying to correct that but if you have a better solution
    please feel free to share...
    Thanks again, regardless!
    A.J.

  • 200301 error for counter update

    Hi everyone,
    I am running a PID loop to control temperature in a box. The counter closes a solid state relay and thus powers my heater. I use a PCI 6221 card.
    I keep getting the following error:
    Error - 200301 occurred at DAQmx Write (Counter Frequency 1Chan 1Samp).vi:1
    Possible reason(s):
    Measurements: Cannot update the Pulse Generation property.
    The pulse generation with previous property settings must complete a full cycle before the property can be updated.
    The code consists of a loop running every 100 msec which adjusts the duty cycle via a property node and then performs a DaqmxWrite on the same channel to force the new property settings to take effect. I have used a Daqmx Clear Task at the end of the vi, but the error occurs randomly every now and then. The pulsing is at 10Hz.
    I believe it might have something to do with my computer, since any time I open another program (Firefox for example, or Origin) while the program is running, it gives the error. I think maybe the computer cant handle all the tasks at once?
    Any ideas what could be wrong here? I've attached my vi below... it could be the PCI card...
    Attachments:
    PIDPWMtemperature.vi ‏74 KB

    Hi HessenMob,
    It looks like your VI is based on an example from the example finder (help => find examples => browse => Hardware in and output => DAQmx => control => General => PWM counter output.vi ). With the example from the example finder they are synchronizing the counter to the AI sample clock. The while loop is waiting until the next sample from the sample clock, so also your loop runs at the specified rate.
    The PWM will only be updated (so counter task is hardware timed single point) when the value of the PWM signal needs to be changed. With continuous you need to write fats enough values to the counter.
    Best regards,
    Martijn S
    Applications Engineer
    NI Netherlands

  • Convergence error on counting circuit

    Ignore all the extra stuff, alot of it was for troubleshooting so it looks messy.  It seems to give me the error when i hook the 7 segment display up to ground. If i just let it run without it connected, the leds light up approprately.  As soon as it's connected, i get convergence.  I tried all the time step stuff too.  No luck.
    Attachments:
    bcd counter.ms10 ‏197 KB

    Here's what I found. Goto SIMULATE>DIGITAL SIMULATION SETTINGS and change itr from IDEAL to REAL. This will require you to place the following power sources on the schematic somewhere: VCC, VDD, DGND, VSS.  This should get it simulating without the error message popping up.
    I do not know why the 7-seg displays don't work under the IDEAL Setting, but most of the time I have observed that they don't. Usually when I am going to use them I have to set the simulator up as described above.
    I hope this helps
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day

  • Get-Counter failing with error : A counter with a negative denominator value was detected

    Hi Folks,
    I have a weird situation where I am sampling the CPU usage for small duration and taking an average of the usage using the 'Get-Counter' command. This command seems to work well when tried directly in the powershell prompt. However, when we use the same
    command in script, the following error throws up, 
    Starting process to consume CPU cycles
    Get-Counter : A counter with a negative denominator value was detected.
    At C:\Monitor.ps1:100 char:29
    + $sys_cpu_obj = Get-Counter <<<< '\Processor(_Total)\% Processor Time'
    + CategoryInfo : InvalidResult: (:) [Get-Counter], Exception
    + FullyQualifiedErrorId : CounterApiError,Microsoft.PowerShell.Commands.GetCounterCommand
    PS C:\> Get-Counter '\Processor(_Total)\% Processor Time'
    Timestamp CounterSamples
    2/29/2012 9:56:47 AM \\vms1\processor(_total)\% processor time :
    26.2817087701422
    PS C:\>
    Here is the routine that is being executed, 
    function sample-CPUUsage([int] $iterations=3,[int] $sampling_interval=2){
    [long] $sum=0
    # Collect an average of physical memory usage
    for($i=0; $i -lt $iterations; $i++){
    $sys_cpu_obj = Get-Counter '\Processor(_Total)\% Processor Time'
    [long] $cpu_usage=$($sys_cpu_obj.CounterSamples).CookedValue
    $sum+=$cpu_usage
    Start-Sleep -Seconds $sampling_interval
    [long] $sum=[long] ($sum/$iterations)
    return $sum
    Why am I getting this error when running the same command from the script ?
    -Pranav

    Hi,
    I cannot reproduce your issue either. It seems like that this issue a issue related with your environment.
    Based on the error message "A counter with a negative denominator value was detected", it seems like that
    $iterations sometimes is treated as a negative number. How about change
    [long] $sum=[long]
    ($sum/$iterations)
     as
    [long] $sum=[system.math]::abs([long]
    ($sum/$iterations))
    Best Regards,
    Yan Li 
    Yan Li
    TechNet Community Support

  • Error message: Count not initialize the applications security component.....

    I have been receiving the following error message when trying to access Firefox:
    Could not initialize the applications security component. The most likely cause is problems with files in your applications profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If our continue to use this session you might see incorrect application behavior when accessing security features.
    Firefox will not open any site. I am using a MacBook. The hard drive is not full. I recently had to start using a vpn to get remote access to my desktop at work. Then it wouldn't load so I had to install something to trick it into accepting the vpn. I do not recall what this was as I got this from a person at our helpdesk at work. I hadn't had any trouble for several days, then all of a sudden, Firefox won't open anything, no websites, no email, etc. I have been using Safari as so far it seems to be working. I do not wish to continue to use Safari and for portions of my job, I need to download things and using Firefox is the only browser that works with the software program I am using.
    Can anyone help me with this problem?
    Thank you very much.

    This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

  • Rev. 80: Error with counter and analytic privilege

    Hey guys,
    I have the following structure in my model:
    Attribute View (AT) --> Calculation View 1 (CV1) --> Calculation View 2 (CV2)
    The calculation views only contain the default aggregation. Additionally CV1 has a counter on one of the columns.
    The content is about analyzing roles from ERP.
    AT has columns RIAExtractID (its a GUID), AGR_NAME (Name of the composite role), CHILD_AGR (Name of the single role).
    CV1 has the same columns but also a counter on CHILD_AGR called "NumberofAssignedSingleRoles".
    CV2 has all columns of CV1 but not CHILD_AGR.
    Here is how it looked like in Rev72: (filtered for one AGR_NAME = AC280-RECHERCHE-REPORTS)
    AT:
    CV1:
    CV2:
    (I would not need CV2 to get this result (I could just select these 3 columns from CV1). However, in CV2 the Column NumberofAssignedSingleRoles is of type "attribute" whereas in CV1 it's a "measure", and with this "hardcoded" aggregation in CV2 I can then apply a filter on NumberofAssignedSingleRoles in an OData request giving me for example all roles which have less than 5 single roles assigned. Otherwise you can't filter on a measure.)
    However, now with Rev. 80 the result of CV2 looks like this:
    Although, AT and CV1 still look the same (and return 4 rows with each a different CHILD_AGR). No matter how many child roles have been in CV1, CV2 gives me NumberofAssignedSingleRoles = 1 for every AGR_NAME!
    Trying to track the issue down, I found that using SYSTEM user gives me correct output of NumberofAssignedSingleRoles = 4.
    Since one major difference between my user for testing and SYSTEM are analytic privileges.
    Currently there is a restriction in the analytic privilege for AT: RIAExtractID = 001CC4F....
    When I remove this restriction, the output is correct, too. (i.e. 4 rows in AT, 4 rows in CV1, Counter= 4 in CV2)
    When I add the restriction again, the output is wrong. (i.e. 4 rows in AT, 4 rows in CV1, Counter = 1 in CV2)
    I'm pretty sure this is a bug in SP8/Rev 80.
    What other options do I have to "debug" any further?
    By the way it makes no difference if I move the restriction from AT to CV1 or CV2, behavior is still the same (=wrong).
    Hope you can help me since this is a major problem for my application!
    Kind Regards,
    Fabian

    I cannot believe it. Rev. 91 and still the same Problem.
    @SAP: Do you just don't care or are you not able to reproduce? I could provide small Delivery Unit with Schema, Table, AT and CVs as well as an analytic privilege.

  • Short dump error when using count(*)

    Hi Experts
    I am getting a short dump error when selecting the records >= current date - 30 see the coding and comment please correct the coding I want to know the ztable records it is important for command interface.
    I have 1402345 records available after deleting the records but as the memory is not enough it is giving short dump error
    select count(*) from ZINT_TABLE
    select count(*) from ZINT_MSGS
       select * from zint_data
                 nto table izint_d2 . "PACKAGE SIZE 20000
       where STATUS = 'OK' AND CREATED_ON >= w_date1.          " VALUE
    endselect.**
    report z_eslp_command_records.
    data: cnt type i.
    data: cnt2 type i.
    data: cnt3 type i.
    data: cnt4 type i.
    DATA:
         w_date1 like sy-datum .
    DATA:
         w_date2 like sy-datum.
    data: izint_msgs type table of zint_msgs.
    data: izint_data type table of zint_data.
    data: izint_m2 type table of zint_msgs.
    data: izint_d2 type table of zint_data.
    INITIALIZATION.
    w_date1 = sy-datum -  30.
    w_date2 = sy-datum -  30.
    select * from zint_data
                 into table izint_data PACKAGE SIZE 3000
                 where STATUS = 'OK' AND CREATED_ON <= w_date1.   " ZERO
    endselect.
    select * from zint_msgs
                 into table izint_msgs  PACKAGE SIZE 3000
                  where  CREATED_ON <= w_date2.              " ZERO
    endselect.
      select * from zint_data
                 into table izint_d2 PACKAGE SIZE 20000
       where STATUS = 'OK' AND CREATED_ON >= w_date1.          " VALUE
    endselect.
    select * from zint_msgs
                 into table izint_m2 PACKAGE SIZE 20000
      where CREATED_ON >= w_date2.                            " VALUE
      endselect.
    select * from zint_data
                into table izint_data2
    where STATUS = 'OK' AND CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
    ENDSELECT.
      select * from zint_msgs
                into table izint_msgs2
    where CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
    ENDSELECT.
    sort izint_data by created_on ascending.
    sort izint_msgs by created_on ascending.
    sort izint_d2 by created_on ascending.
    sort izint_m2 by created_on ascending.
    describe table izint_data lines cnt.
    describe table izint_msgs lines cnt2.
    describe table izint_d2 lines cnt3.
    describe table izint_m2 lines cnt4.
    write:/ ' Note: THE RECORDS COUNTED SHOULD SHOW ZERO ELSE THE SCRIPT FAILED TO RUN' color 3.
    skip.
    write:/ '1. Records counted in ZINT_DATA   <=current date - 30                   :' color 2,                        cnt color 4.
    write:/ '2. Records available in ZINT_DATA >=current date - 30                   'color 4,                   cnt3 color 4 .
    skip.
    write:/ '2. Records counted in ZINT_MSGS   <=current date - 30                   :' color 2                 ,                      cnt2 color 4.
    write:/ '4. Records available in ZINT_MSGS >=current date - 30                   'color 4  ,            cnt4 color 4 .
    TOP-OF-PAGE.
    WRITE:/55(60) ' WAGNERS INVESTMENT LIMITED  '.
    WRITE:/50(40) ' Command Interface Data' CENTERED .
      WRITE:/50(40) '----
    ' CENTERED .
      FORMAT INTENSIFIED ON.
      SKIP.
      "FORMAT COLOR COL_HEADING.
      ULINE.
      FORMAT COLOR 1.
    END-OF-PAGE.

    Answer

  • Performance counter updating error

    Hello,
    We are getting flooded with alerts event code 106. Is there a problem with the counters. We also get these on our mailbox server also. The servers are exchange 2013 on prem. The we have 2 CAS and 4 mailbox servers. 
    Application:MSExchange Common:106
    Performance counter updating error. Counter name is Client-side Calls, category name is MSExchange Active Manager Client. Option
    Performance counter
    updating error. Counter name is Unique servers queried, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is no
    Performance counter updating error. Counter name is Client-side Calls, category name is MSExchange Active Manager Client. Optional code: 2. Exception: The exception thrown is : System.InvalidOperationException:
    The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly. at System.Diagnostics.PerformanceCounter.InitializeImpl() at System.Diagnostics.PerformanceCounter.get_RawValue() at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
    Last worker process info : System.ArgumentException: Process with an Id of 1832 is not running. at System.Diagnostics.Process.GetProcessById(Int32 processId) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo() Processes running
    while Performance counter failed to update: 7020 splunk-perfmon 588 services 976 svchost 384 TrustedInstaller 1368 svchost 6620 rdpclip 1168 rundll32 1560 inetinfo 5300 XenDpriv 1160 svchost 2144 XenGuestAgent 2340 Microsoft.Exchange.Directory.TopologyService
    8444 conhost 956 LogonUI 2528 w3wp 2724 WmiPrvSE 6884 explorer 5472 nvwmi64 544 winlogon 3104 w3wp 772 nvvsvc 3292 MSExchangeFrontendTransport 2108 WMSvc 7228 w3wp 332 smss 1312 spoolsv 3872 rundll32 4856 WmiApSrv 6704 w3wp 5444 winlogon 3864 svchost 1104
    VSSVC 6404 ccSvcHst 10552 vds 504 csrss 5032 Smc 6804 dwm 696 svchost 496 wininit 4632 rundll32 888 svchost 6600 w3wp 492 w3wp 2264 Ec2Config 1672 MSExchangeHMHost 2064 svchost 9512 splunkd 7972 w3wp 1860 SMSvcHost 872 svchost 5792 csrss 5592 MSExchangeHMWorker
    1452 ruby 1840 svchost 6764 w3wp 1048 svchost 456 csrss 7152 w3wp 1388 bedbg 3996 Microsoft.Exchange.UM.CallRouter 4380 splunk-wmi 2812 WmiPrvSE 2024 ccSvcHst 3792 Microsoft.Exchange.ServiceHost 600 lsass 796 nvwmi64 5756 w3wp 1580 msdtc 2796 svchost 428 svchost
    820 nvSCPAPISvr 1016 svchost 1996 svchost 1600 Microsoft.Exchange.Diagnostics.Service 4356 nvxdsync 4352 taskeng 608 lsm 4936 svchost 2964 beremote 6312 taskhost 1976 svchost 4 System 10640 conhost 0 Idle Performance Counters Layout information: FileMappingNotFoundException
    for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange active manager client. Error Details: 2 at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String
    name, Boolean writable) at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)

    Hi,
    Please try the following steps:
    1. Stop all the exchange-related services on the server
    2. Open the command prompt by “Run as an Administrator”
    3. Go to "C:\Program files\Microsoft\Exchange Server\V15\Setup\Perf"
    4. To Unload Counter
    ===============
    C:\Program files\Microsoft\Exchange Server\V15\Setup\Perf>unlodctr "MSExchaneg Active Manager Client"
    5. To Load Counter
    =============
    C:\Program files\Microsoft\Exchange Server\V15\Setup\Perf>lodctr ActiveManagerClientPerfmon.ini
    Then check whether the issue persists. The solution above is referred to the following similar thread:
    https://social.technet.microsoft.com/Forums/exchange/en-US/58692b89-d83e-4f3a-b991-9bb38b8ccad0/performance-counters-update-errors-exchange-active-manager-client-ones?forum=exchange2010
    Regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Winnie Liang
    TechNet Community Support

  • After upgrade to Exchange 2013 CU6 Application log flooded with Performance counter updating error 106 for Time in Resource per second

    After upgrading to CU6 for Exchange 2013, the Application event log is flooded with MSExhange Common error 106: Performance counter updating error. Counter name is Time in Resource per second, category name is MSExchange Activity Context Resources. Optional
    code: 2. Exception: The exception thrown is : System.InvalidOperationException: Instance 'ad-powershell-defaultdomain' already exists with a lifetime of Process.  It cannot be recreated or reused until it has been removed or until the process using it
    has exited.
       at System.Diagnostics.SharedPerformanceCounter.FindInstance(Int32 instanceNameHashCode, String instanceName, CategoryEntry* categoryPointer, InstanceEntry** returnInstancePointerReference, Boolean activateUnusedInstances, PerformanceCounterInstanceLifetime
    lifetime, Boolean& foundFreeInstance)
       at System.Diagnostics.SharedPerformanceCounter.GetCounter(String counterName, String instanceName, Boolean enableReuse, PerformanceCounterInstanceLifetime lifetime)
       at System.Diagnostics.SharedPerformanceCounter..ctor(String catName, String counterName, String instanceName, PerformanceCounterInstanceLifetime lifetime)
       at System.Diagnostics.PerformanceCounter.InitializeImpl()
       at System.Diagnostics.PerformanceCounter.get_RawValue()
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
    Last worker process info : System.ArgumentException: Process with an Id of 4776 is not running.
       at System.Diagnostics.Process.GetProcessById(Int32 processId)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Processes running while Performance counter failed to update:
    14256 winlogon
    15748 powershell
    6524 Microsoft.Exchange.UM.CallRouter
    5904 w3wp
    584 lsass
    780 LogonUI
    4324 MSExchangeFrontendTransport
    6292 Microsoft.Exchange.Store.Worker
    2744 WmiPrvSE
    576 services
    3136 MonitoringHost
    12568 svchost
    1360 hostcontrollerservice
    8648 WmiPrvSE
    1752 SMSvcHost
    1160 spoolsv
    1356 sftracing
    9528 TiWorker
    10444 explorer
    2732 w3wp
    14908 WmiPrvSE
    3124 Microsoft.Exchange.Store.Worker
    4696 Microsoft.Exchange.Store.Service
    4892 MSExchangeMailboxAssistants
    12208 w3wp
    15740 powershell
    2128 WMSvc
    748 rundll32
    8232 w3wp
    8400 svchost
    3700 MonitoringHost
    15716 powershell
    5864 MSExchangeThrottling
    2908 w3wp
    4088 Microsoft.Exchange.EdgeSyncSvc
    5660 scanningprocess
    2292 wuauclt
    5656 umservice
    6044 scanningprocess
    4076 noderunner
    1908 MSExchangeHMHost
    2892 Microsoft.Exchange.AntispamUpdateSvc
    3876 noderunner
    3676 MSExchangeMailboxReplication
    15732 powershell
    2096 svchost
    7096 UMWorkerProcess
    516 winlogon
    908 svchost
    1296 HealthService
    1492 svchost
    2824 w3wp
    12324 dwm
    1560 ForefrontActiveDirectoryConnector
    304 smss
    10820 w3wp
    8464 svchost
    888 Microsoft.Exchange.ContentFilter.Wrapper
    5024 msexchangerepl
    488 wininit
    8564 taskhostex
    5272 Microsoft.Exchange.ServiceHost
    3832 noderunner
    10088 w3wp
    480 csrss
    7920 conhost
    872 svchost
    5992 scanningprocess
    4808 msdtc
    8352 dllhost
    860 TrustedInstaller
    4008 rundll32
    4400 conhost
    656 svchost
    9828 w3wp
    1832 noderunner
    4392 MSExchangeHMWorker
    1828 mqsvc
    700 svchost
    1628 Microsoft.Exchange.Diagnostics.Service
    3596 w3wp
    2220 Microsoft.Exchange.Directory.TopologyService
    1820 MSExchangeDelivery
    7532 MSExchangeTransport
    13372 svchost
    832 svchost
    9696 conhost
    8316 svchost
    1580 dllhost
    3980 Microsoft.Exchange.RpcClientAccess.Service
    8788 VSSVC
    5948 MSExchangeTransportLogSearch
    2992 MSExchangeDagMgmt
    10632 csrss
    1216 fms
    3776 rundll32
    5356 MSExchangeSubmission
    7908 EdgeTransport
    11576 w3wp
    1600 inetinfo
    1008 svchost
    416 csrss
    808 svchost
    7608 w3wp
    1588 updateservice
    4148 Microsoft.Exchange.Search.Service
    640 w3wp
    796 dwm
    2568 SMSvcHost
    1188 svchost
    4 System
    3484 rdpclip
    0 Idle
    Performance Counters Layout information: A process is holding onto a transport performance counter. processId : 15716, counter : time in resource per second Value=30 SpinLock=0 Lifetime=Type: 1 ProcessId: 15716 StartupTime: 130608376318179644, currentInstance
    : ad-powershell-defaultdomain(95CC324A) RefCount=1 SpinLock=0 Offset=38216, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 15716, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 15716 StartupTime: 130608376318179644, currentInstance : mb-powershell-defaultdomain(CC014C00)
    RefCount=1 SpinLock=0 Offset=37888, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 15716, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 15716 StartupTime: 130608376318179644, currentInstance : rpca-powershell-defaultdomain(4598AFAF)
    RefCount=1 SpinLock=0 Offset=37560, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 3596, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3596 StartupTime: 130608368805385179, currentInstance : rpca-w3wp-msexchangemapimailboxapppool(E28F3117)
    RefCount=1 SpinLock=0 Offset=37232, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 3596, counter : time in resource per second Value=86 SpinLock=0 Lifetime=Type: 1 ProcessId: 3596 StartupTime: 130608368805385179, currentInstance : mb-w3wp-msexchangemapimailboxapppool(F9439F58)
    RefCount=1 SpinLock=0 Offset=36904, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 3596, counter : time in resource per second Value=301 SpinLock=0 Lifetime=Type: 1 ProcessId: 3596 StartupTime: 130608368805385179, currentInstance : ad-w3wp-msexchangemapimailboxapppool(35491652)
    RefCount=1 SpinLock=0 Offset=36576, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 10088, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 10088 StartupTime: 130608368435182301, currentInstance : rpca-w3wp-msexchangemapifrontendapppool(2C7F2005)
    RefCount=1 SpinLock=0 Offset=36248, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 10088, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 10088 StartupTime: 130608368435182301, currentInstance : mb-w3wp-msexchangemapifrontendapppool(BE5C2DAA)
    RefCount=1 SpinLock=0 Offset=35920, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 10088, counter : time in resource per second Value=50 SpinLock=0 Lifetime=Type: 1 ProcessId: 10088 StartupTime: 130608368435182301, currentInstance : ad-w3wp-msexchangemapifrontendapppool(C0FDFAE0)
    RefCount=1 SpinLock=0 Offset=35592, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 640, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 640 StartupTime: 130608368405334576, currentInstance : rpca-w3wp-msexchangeowacalendarapppool(8F10D1B5)
    RefCount=1 SpinLock=0 Offset=35264, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 640, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 640 StartupTime: 130608368405334576, currentInstance : mb-w3wp-msexchangeowacalendarapppool(2D8C9EBA)
    RefCount=1 SpinLock=0 Offset=34936, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 640, counter : time in resource per second Value=75 SpinLock=0 Lifetime=Type: 1 ProcessId: 640 StartupTime: 130608368405334576, currentInstance : ad-w3wp-msexchangeowacalendarapppool(D845E230)
    RefCount=1 SpinLock=0 Offset=34608, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 12208, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 12208 StartupTime: 130608368146087354, currentInstance : rpca-w3wp-msexchangeautodiscoverapppool(6DABF262)
    RefCount=1 SpinLock=0 Offset=34280, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 12208, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 12208 StartupTime: 130608368146087354, currentInstance : mb-w3wp-msexchangeautodiscoverapppool(D1C6EF4D)
    RefCount=1 SpinLock=0 Offset=33952, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 12208, counter : time in resource per second Value=1002 SpinLock=0 Lifetime=Type: 1 ProcessId: 12208 StartupTime: 130608368146087354, currentInstance : ad-w3wp-msexchangeautodiscoverapppool(FD072087)
    RefCount=1 SpinLock=0 Offset=33624, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 11576, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 11576 StartupTime: 130608368080143532, currentInstance : rpca-w3wp-msexchangeecpapppool(57806648)
    RefCount=1 SpinLock=0 Offset=33296, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 11576, counter : time in resource per second Value=204 SpinLock=0 Lifetime=Type: 1 ProcessId: 11576 StartupTime: 130608368080143532, currentInstance : mb-w3wp-msexchangeecpapppool(E27E6507)
    RefCount=1 SpinLock=0 Offset=32968, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 11576, counter : time in resource per second Value=1804 SpinLock=0 Lifetime=Type: 1 ProcessId: 11576 StartupTime: 130608368080143532, currentInstance : ad-w3wp-msexchangeecpapppool(B648688D)
    RefCount=1 SpinLock=0 Offset=32640, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 10820, counter : time in resource per second Value=64 SpinLock=0 Lifetime=Type: 1 ProcessId: 10820 StartupTime: 130608368364391554, currentInstance : ad-w3wp-msexchangeoabapppool(CC31A917)
    RefCount=1 SpinLock=0 Offset=32312, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 10820, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 10820 StartupTime: 130608368364391554, currentInstance : mb-w3wp-msexchangeoabapppool(58D0A79D)
    RefCount=1 SpinLock=0 Offset=31984, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 10820, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 10820 StartupTime: 130608368364391554, currentInstance : rpca-w3wp-msexchangeoabapppool(8149E8D2)
    RefCount=1 SpinLock=0 Offset=31656, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 7608, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7608 StartupTime: 130608367931073979, currentInstance : rpca-w3wp-msexchangeowaapppool(4AA799E7)
    RefCount=1 SpinLock=0 Offset=31328, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 7608, counter : time in resource per second Value=792 SpinLock=0 Lifetime=Type: 1 ProcessId: 7608 StartupTime: 130608367931073979, currentInstance : mb-w3wp-msexchangeowaapppool(C3953468)
    RefCount=1 SpinLock=0 Offset=31000, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 7608, counter : time in resource per second Value=2537 SpinLock=0 Lifetime=Type: 1 ProcessId: 7608 StartupTime: 130608367931073979, currentInstance : ad-w3wp-msexchangeowaapppool(160BE662)
    RefCount=1 SpinLock=0 Offset=30672, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5904, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5904 StartupTime: 130608367955918049, currentInstance : rpca-w3wp-msexchangepowershellapppool(3CF18BF)
    RefCount=1 SpinLock=0 Offset=30344, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5904, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5904 StartupTime: 130608367955918049, currentInstance : mb-w3wp-msexchangepowershellapppool(A686C810)
    RefCount=1 SpinLock=0 Offset=30016, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5904, counter : time in resource per second Value=2178 SpinLock=0 Lifetime=Type: 1 ProcessId: 5904 StartupTime: 130608367955918049, currentInstance : ad-w3wp-msexchangepowershellapppool(9E48CD5A)
    RefCount=1 SpinLock=0 Offset=29688, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 3832, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3832 StartupTime: 130608365723574632, currentInstance : rpca-noderunner-contentenginenode1(316BF6E3)
    RefCount=1 SpinLock=0 Offset=29360, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 3832, counter : time in resource per second Value=1148 SpinLock=0 Lifetime=Type: 1 ProcessId: 3832 StartupTime: 130608365723574632, currentInstance : mb-noderunner-contentenginenode1(2EE8286C)
    RefCount=1 SpinLock=0 Offset=29032, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 3832, counter : time in resource per second Value=322 SpinLock=0 Lifetime=Type: 1 ProcessId: 3832 StartupTime: 130608365723574632, currentInstance : ad-noderunner-contentenginenode1(61591E6)
    RefCount=1 SpinLock=0 Offset=28704, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 8232, counter : time in resource per second Value=73 SpinLock=0 Lifetime=Type: 1 ProcessId: 8232 StartupTime: 130608367954980517, currentInstance : ad-w3wp-msexchangepowershellfrontendapppool(FAEFA1B4)
    RefCount=1 SpinLock=0 Offset=28376, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 8232, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 8232 StartupTime: 130608367954980517, currentInstance : mb-w3wp-msexchangepowershellfrontendapppool(34B9187E)
    RefCount=1 SpinLock=0 Offset=28048, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 8232, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 8232 StartupTime: 130608367954980517, currentInstance : rpca-w3wp-msexchangepowershellfrontendapppool(E1115251)
    RefCount=1 SpinLock=0 Offset=27720, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 9828, counter : time in resource per second Value=909 SpinLock=0 Lifetime=Type: 1 ProcessId: 9828 StartupTime: 130608367291344391, currentInstance : ad-w3wp-msexchangerpcproxyapppool(99BB8ED6)
    RefCount=1 SpinLock=0 Offset=27392, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 9828, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 9828 StartupTime: 130608367291344391, currentInstance : mb-w3wp-msexchangerpcproxyapppool(B190F21C)
    RefCount=1 SpinLock=0 Offset=27064, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 9828, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 9828 StartupTime: 130608367291344391, currentInstance : rpca-w3wp-msexchangerpcproxyapppool(8B7590B3)
    RefCount=1 SpinLock=0 Offset=26736, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 7908, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7908 StartupTime: 130608366316230865, currentInstance : rpca-edgetransport-edgetransport.exe(911B6EB3)
    RefCount=1 SpinLock=0 Offset=26408, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 7908, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7908 StartupTime: 130608366316230865, currentInstance : mb-edgetransport-edgetransport.exe(A5AF4BBC)
    RefCount=1 SpinLock=0 Offset=26080, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 7908, counter : time in resource per second Value=679 SpinLock=0 Lifetime=Type: 1 ProcessId: 7908 StartupTime: 130608366316230865, currentInstance : ad-edgetransport-edgetransport.exe(E79D4A36)
    RefCount=1 SpinLock=0 Offset=25752, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 7096, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7096 StartupTime: 130608366107949622, currentInstance : rpca-umworkerprocess-umworkerprocess.exe(970CCE33)
    RefCount=1 SpinLock=0 Offset=25424, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 7096, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7096 StartupTime: 130608366107949622, currentInstance : mb-umworkerprocess-umworkerprocess.exe(8A7F8A3C)
    RefCount=1 SpinLock=0 Offset=25096, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 7096, counter : time in resource per second Value=89 SpinLock=0 Lifetime=Type: 1 ProcessId: 7096 StartupTime: 130608366107949622, currentInstance : ad-umworkerprocess-umworkerprocess.exe(95818B6)
    RefCount=1 SpinLock=0 Offset=24768, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 7532, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7532 StartupTime: 130608366287637157, currentInstance : rpca-msexchangetransport-msexchangetransport.exe(24F56C33)
    RefCount=1 SpinLock=0 Offset=24440, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 7532, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7532 StartupTime: 130608366287637157, currentInstance : mb-msexchangetransport-msexchangetransport.exe(92FB3D3C)
    RefCount=1 SpinLock=0 Offset=24112, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 7532, counter : time in resource per second Value=12 SpinLock=0 Lifetime=Type: 1 ProcessId: 7532 StartupTime: 130608366287637157, currentInstance : ad-msexchangetransport-msexchangetransport.exe(2447ECB6)
    RefCount=1 SpinLock=0 Offset=23784, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 6292, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6292 StartupTime: 130608366134668487, currentInstance : rpca-microsoft.exchange.store.worker-microsoft.exchange.store.worker.exe(ABB009B3)
    RefCount=1 SpinLock=0 Offset=23456, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 6292, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6292 StartupTime: 130608366134668487, currentInstance : mb-microsoft.exchange.store.worker-microsoft.exchange.store.worker.exe(38BA31BC)
    RefCount=1 SpinLock=0 Offset=23128, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 6292, counter : time in resource per second Value=704 SpinLock=0 Lifetime=Type: 1 ProcessId: 6292 StartupTime: 130608366134668487, currentInstance : ad-microsoft.exchange.store.worker-microsoft.exchange.store.worker.exe(11106236)
    RefCount=1 SpinLock=0 Offset=22800, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 6524, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6524 StartupTime: 130608366054199628, currentInstance : rpca-microsoft.exchange.um.callrouter-microsoft.exchange.um.callrouter.exe(E8475353)
    RefCount=1 SpinLock=0 Offset=22472, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 6524, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6524 StartupTime: 130608366054199628, currentInstance : mb-microsoft.exchange.um.callrouter-microsoft.exchange.um.callrouter.exe(8F65881C)
    RefCount=1 SpinLock=0 Offset=22144, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 6524, counter : time in resource per second Value=40 SpinLock=0 Lifetime=Type: 1 ProcessId: 6524 StartupTime: 130608366054199628, currentInstance : ad-microsoft.exchange.um.callrouter-microsoft.exchange.um.callrouter.exe(78F52196)
    RefCount=1 SpinLock=0 Offset=21816, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5656, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5656 StartupTime: 130608365987637119, currentInstance : rpca-umservice-umservice.exe(E39A1133)
    RefCount=1 SpinLock=0 Offset=21488, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5656, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5656 StartupTime: 130608365987637119, currentInstance : mb-umservice-umservice.exe(FFBB273C) RefCount=1
    SpinLock=0 Offset=21160, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5656, counter : time in resource per second Value=45 SpinLock=0 Lifetime=Type: 1 ProcessId: 5656 StartupTime: 130608365987637119, currentInstance : ad-umservice-umservice.exe(9A8AC6B6) RefCount=1
    SpinLock=0 Offset=20832, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5948, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5948 StartupTime: 130608365970762140, currentInstance : rpca-msexchangetransportlogsearch-msexchangetransportlogsearch.exe(EF66F2D3)
    RefCount=1 SpinLock=0 Offset=20504, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5948, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5948 StartupTime: 130608365970762140, currentInstance : mb-msexchangetransportlogsearch-msexchangetransportlogsearch.exe(B020391C)
    RefCount=1 SpinLock=0 Offset=20176, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5948, counter : time in resource per second Value=28 SpinLock=0 Lifetime=Type: 1 ProcessId: 5948 StartupTime: 130608365970762140, currentInstance : ad-msexchangetransportlogsearch-msexchangetransportlogsearch.exe(20578116)
    RefCount=1 SpinLock=0 Offset=19848, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5864, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5864 StartupTime: 130608365966074661, currentInstance : rpca-msexchangethrottling-msexchangethrottling.exe(8C1DA893)
    RefCount=1 SpinLock=0 Offset=19520, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5864, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5864 StartupTime: 130608365966074661, currentInstance : mb-msexchangethrottling-msexchangethrottling.exe(AB2BADDC)
    RefCount=1 SpinLock=0 Offset=19192, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5864, counter : time in resource per second Value=8 SpinLock=0 Lifetime=Type: 1 ProcessId: 5864 StartupTime: 130608365966074661, currentInstance : ad-msexchangethrottling-msexchangethrottling.exe(8962F4D6)
    RefCount=1 SpinLock=0 Offset=18864, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5356, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5356 StartupTime: 130608365930918390, currentInstance : rpca-msexchangesubmission-msexchangesubmission.exe(60747EB3)
    RefCount=1 SpinLock=0 Offset=18536, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5356, counter : time in resource per second Value=400 SpinLock=0 Lifetime=Type: 1 ProcessId: 5356 StartupTime: 130608365930918390, currentInstance : mb-msexchangesubmission-msexchangesubmission.exe(67B4173C)
    RefCount=1 SpinLock=0 Offset=18208, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5356, counter : time in resource per second Value=390 SpinLock=0 Lifetime=Type: 1 ProcessId: 5356 StartupTime: 130608365930918390, currentInstance : ad-msexchangesubmission-msexchangesubmission.exe(85200236)
    RefCount=1 SpinLock=0 Offset=17880, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 3980, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3980 StartupTime: 130608365902793374, currentInstance : rpca-microsoft.exchange.rpcclientaccess.service-microsoft.exchange.rpcclientaccess.service.exe(E4305E13)
    RefCount=1 SpinLock=0 Offset=17552, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 3980, counter : time in resource per second Value=15105 SpinLock=0 Lifetime=Type: 1 ProcessId: 3980 StartupTime: 130608365902793374, currentInstance : mb-microsoft.exchange.rpcclientaccess.service-microsoft.exchange.rpcclientaccess.service.exe(BBA60BDC)
    RefCount=1 SpinLock=0 Offset=17224, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 3980, counter : time in resource per second Value=1570 SpinLock=0 Lifetime=Type: 1 ProcessId: 3980 StartupTime: 130608365902793374, currentInstance : ad-microsoft.exchange.rpcclientaccess.service-microsoft.exchange.rpcclientaccess.service.exe(B6581E56)
    RefCount=1 SpinLock=0 Offset=16896, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 3676, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3676 StartupTime: 130608365883887116, currentInstance : rpca-msexchangemailboxreplication-msexchangemailboxreplication.exe(276F4DB3)
    RefCount=1 SpinLock=0 Offset=16568, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 3676, counter : time in resource per second Value=55 SpinLock=0 Lifetime=Type: 1 ProcessId: 3676 StartupTime: 130608365883887116, currentInstance : mb-msexchangemailboxreplication-msexchangemailboxreplication.exe(95E41BC)
    RefCount=1 SpinLock=0 Offset=16240, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 3676, counter : time in resource per second Value=1045 SpinLock=0 Lifetime=Type: 1 ProcessId: 3676 StartupTime: 130608365883887116, currentInstance : ad-msexchangemailboxreplication-msexchangemailboxreplication.exe(394712B6)
    RefCount=1 SpinLock=0 Offset=15912, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5272, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5272 StartupTime: 130608365924980876, currentInstance : rpca-microsoft.exchange.servicehost-microsoft.exchange.servicehost.exe(39C8D53)
    RefCount=1 SpinLock=0 Offset=15584, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5272, counter : time in resource per second Value=13 SpinLock=0 Lifetime=Type: 1 ProcessId: 5272 StartupTime: 130608365924980876, currentInstance : mb-microsoft.exchange.servicehost-microsoft.exchange.servicehost.exe(E7963A1C)
    RefCount=1 SpinLock=0 Offset=15256, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 5272, counter : time in resource per second Value=1004 SpinLock=0 Lifetime=Type: 1 ProcessId: 5272 StartupTime: 130608365924980876, currentInstance : ad-microsoft.exchange.servicehost-microsoft.exchange.servicehost.exe(10E8B196)
    RefCount=1 SpinLock=0 Offset=14928, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 4892, counter : time in resource per second Value=2260 SpinLock=0 Lifetime=Type: 1 ProcessId: 4892 StartupTime: 130608365821855891, currentInstance : rpca-msexchangemailboxassistants-msexchangemailboxassistants.exe(DEAC0933)
    RefCount=1 SpinLock=0 Offset=14600, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 4892, counter : time in resource per second Value=19900 SpinLock=0 Lifetime=Type: 1 ProcessId: 4892 StartupTime: 130608365821855891, currentInstance : mb-msexchangemailboxassistants-msexchangemailboxassistants.exe(A754293C)
    RefCount=1 SpinLock=0 Offset=14272, categoryName: MSExchange Activity Context Resources
    A process is holding onto a transport performance counter. processId : 4892, counter : time in resource per second Value=3491 SpinLock=0 Lifetime=Type: 1 ProcessId: 4892 StartupTime: 130608365821855891, currentInstance : ad-msexchangemailboxassistants-msexchangemailboxassistants.exe(EE890EB6)
    RefCount=1 SpinLock=0 Offset=13944, categoryName...

    This error is not resolved in CU8.
    [PS] C:\>Get-ExchangeServer | fl *version*
    AdminDisplayVersion : Version 15.0 (Build 1076.9)
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="MSExchange Common" />
    <EventID Qualifiers="49156">106</EventID>
    <Level>2</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-04-15T10:14:22.000000000Z" />
    <EventRecordID>11366785</EventRecordID>
    <Channel>Application</Channel>
    <Computer>EX1.domain.com</Computer>
    <Security />
    </System>
    - <EventData>
    <Data>2</Data>
    <Data>Time in Resource per second</Data>
    <Data>MSExchange Activity Context Resources</Data>
    <Data>The exception thrown is : System.InvalidOperationException: Instance 'ad-powershell-defaultdomain' already exists with a lifetime of Process. It cannot be recreated or reused until it has been removed or until the process using it has exited. at System.Diagnostics.SharedPerformanceCounter.FindInstance(Int32 instanceNameHashCode, String instanceName, CategoryEntry* categoryPointer, InstanceEntry** returnInstancePointerReference, Boolean activateUnusedInstances, PerformanceCounterInstanceLifetime lifetime, Boolean& foundFreeInstance) at System.Diagnostics.SharedPerformanceCounter.GetCounter(String counterName, String instanceName, Boolean enableReuse, PerformanceCounterInstanceLifetime lifetime) at System.Diagnostics.SharedPerformanceCounter..ctor(String catName, String counterName, String instanceName, PerformanceCounterInstanceLifetime lifetime) at System.Diagnostics.PerformanceCounter.InitializeImpl() at System.Diagnostics.PerformanceCounter.get_RawValue() at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue() Last worker process info : System.ArgumentException: Process with an Id of 884 is not running. at System.Diagnostics.Process.GetProcessById(Int32 processId) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo() Processes running while Performance counter failed to update: 15084 w3wp 16804 powershell 16368 SCNotification 21108 conhost 22744 dllhost 17224 conhost 844 MsMpEng 21100 conhost 5580 taskhostex 1724 Microsoft.Exchange.Diagnostics.Service 3852 MSExchangeDagMgmt 13764 MonitoringHost 1264 fms 832 LogonUI 25828 mmc 1688 inetinfo 7900 Microsoft.Exchange.Store.Worker 3840 rundll32 1252 SMSvcHost 15040 msseces 3916 w3wp 1676 svchost 2968 Microsoft.Exchange.Directory.TopologyService 14600 explorer 5548 MSExchangeMailboxReplication 1236 svchost 5976 scanningprocess 2096 WMSvc 2200 w3wp 13376 WmiPrvSE 19472 powershell 8116 umservice 24492 powershell 24060 conhost 7204 MSExchangeTransportLogSearch 1812 WmiPrvSE 16348 w3wp 10260 svchost 2496 conhost 3784 Microsoft.Exchange.AntispamUpdateSvc 9932 Microsoft.Exchange.ContentFilter.Wrapper 16280 conhost 2056 svchost 1192 spoolsv 2052 noderunner 320 smss 5920 scanningprocess 11152 ParserServer 8068 UMWorkerProcess 3756 conhost 304 svchost 2888 w3wp 732 svchost 1900 winlogon 14948 w3wp 22700 noderunner 2872 updateservice 2000 w3wp 700 svchost 1992 mqsvc 4128 Microsoft.Exchange.EdgeSyncSvc 28636 ParserServer 17912 conhost 20652 ParserServer 1960 svchost 14168 msdtc 11436 ParserServer 19192 ParserServer 4536 Microsoft.Exchange.Imap4Service 16168 WmiPrvSE 10132 w3wp 27800 noderunner 25644 mmc 2452 ParserServer 640 lsass 1932 svchost 632 services 3216 ForefrontActiveDirectoryConnector 17436 svchost 4504 Microsoft.Exchange.Store.Service 4500 ParserServer 2772 WmiPrvSE 28200 dllhost 10528 VSSVC 10520 dllhost 7932 Microsoft.Exchange.Store.Worker 1032 rundll32 1920 sftracing 7492 Microsoft.Exchange.Store.Worker 14384 rdpclip 26016 conhost 24464 powershell 13332 MSExchangeHMHost 1008 svchost 10920 csrss 7040 MSExchangeThrottling 3160 MSExchangeTransport 1004 svchost 572 winlogon 7464 Microsoft.Exchange.Store.Worker 10880 WmiPrvSE 7892 Microsoft.Exchange.Store.Worker 12632 CcmExec 992 svchost 10904 WmiPrvSE 4868 Microsoft.Exchange.Imap4Service 6160 w3wp 14348 conhost 8312 dllhost 14776 w3wp 13480 dwm 5720 Microsoft.Exchange.Pop3 544 wininit 7008 Microsoft.Exchange.UM.CallRouter 4420 Microsoft.Exchange.Imap4 6140 Microsoft.Exchange.Pop3 5764 Microsoft.Exchange.Pop3Service 964 svchost 7428 Microsoft.Exchange.Store.Worker 13580 MonitoringHost 25096 noderunner 5700 scanningprocess 13456 conhost 24656 MSExchangeMailboxAssistants 5260 Microsoft.Exchange.RpcClientAccess.Service 6080 Microsoft.Exchange.Search.Service 11288 powershell 3960 MSExchangeDelivery 4440 MSExchangeFrontendTransport 6112 Microsoft.Exchange.Store.Worker 12712 ParserServer 5248 conhost 1368 HealthService 6536 MSExchangeSubmission 26076 conhost 3084 rundll32 6100 Microsoft.Exchange.Pop3Service 24200 conhost 536 csrss 7812 Microsoft.Exchange.Store.Worker 10396 svchost 10824 conhost 21596 MSExchangeHMWorker 7416 Microsoft.Exchange.Store.Worker 852 dwm 7368 Microsoft.Exchange.Store.Worker 468 csrss 17552 conhost 2260 SMSvcHost 12100 CmRcService 4772 Microsoft.Exchange.Imap4 10372 ParserServer 3044 EdgeTransport 4760 conhost 14672 svchost 15100 hostcontrollerservice 6048 msexchangerepl 5616 Microsoft.Exchange.Store.Worker 436 svchost 4 System 6408 Microsoft.Exchange.ServiceHost 0 Idle Performance Counters Layout information: A process is holding onto a transport performance counter. processId : 23084, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 23084 StartupTime: 130735656036583286, currentInstance : rpca-e14cmdletswrapper-defaultdomain(B61B0DD9) RefCount=0 SpinLock=0 Offset=40184, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 23084, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 23084 StartupTime: 130735656036583286, currentInstance : mb-e14cmdletswrapper-defaultdomain(290EF16) RefCount=0 SpinLock=0 Offset=39856, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 23084, counter : time in resource per second Value=102 SpinLock=0 Lifetime=Type: 1 ProcessId: 23084 StartupTime: 130735656036583286, currentInstance : ad-e14cmdletswrapper-defaultdomain(2CDA669C) RefCount=0 SpinLock=0 Offset=39528, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 11288, counter : time in resource per second Value=81 SpinLock=0 Lifetime=Type: 1 ProcessId: 11288 StartupTime: 130735664378248405, currentInstance : ad-powershell-defaultdomain(95CC324A) RefCount=1 SpinLock=0 Offset=39200, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 11288, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 11288 StartupTime: 130735664378248405, currentInstance : mb-powershell-defaultdomain(CC014C00) RefCount=1 SpinLock=0 Offset=38872, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 11288, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 11288 StartupTime: 130735664378248405, currentInstance : rpca-powershell-defaultdomain(4598AFAF) RefCount=1 SpinLock=0 Offset=38544, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 3044, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3044 StartupTime: 130732607834359955, currentInstance : rpca-edgetransport-edgetransport.exe(911B6EB3) RefCount=1 SpinLock=0 Offset=38216, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 3044, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3044 StartupTime: 130732607834359955, currentInstance : mb-edgetransport-edgetransport.exe(A5AF4BBC) RefCount=1 SpinLock=0 Offset=37888, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 3044, counter : time in resource per second Value=400734 SpinLock=0 Lifetime=Type: 1 ProcessId: 3044 StartupTime: 130732607834359955, currentInstance : ad-edgetransport-edgetransport.exe(E79D4A36) RefCount=1 SpinLock=0 Offset=37560, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 2200, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 2200 StartupTime: 130730082646643505, currentInstance : rpca-w3wp-msexchangeowaapppool(4AA799E7) RefCount=0 SpinLock=0 Offset=37232, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 2200, counter : time in resource per second Value=280053 SpinLock=0 Lifetime=Type: 1 ProcessId: 2200 StartupTime: 130730082646643505, currentInstance : mb-w3wp-msexchangeowaapppool(C3953468) RefCount=0 SpinLock=0 Offset=36904, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 2200, counter : time in resource per second Value=142126 SpinLock=0 Lifetime=Type: 1 ProcessId: 2200 StartupTime: 130730082646643505, currentInstance : ad-w3wp-msexchangeowaapppool(160BE662) RefCount=0 SpinLock=0 Offset=36576, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 14776, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 14776 StartupTime: 130730081973252112, currentInstance : rpca-w3wp-msexchangepowershellapppool(3CF18BF) RefCount=0 SpinLock=0 Offset=36248, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 14776, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 14776 StartupTime: 130730081973252112, currentInstance : mb-w3wp-msexchangepowershellapppool(A686C810) RefCount=0 SpinLock=0 Offset=35920, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 14776, counter : time in resource per second Value=2068875 SpinLock=0 Lifetime=Type: 1 ProcessId: 14776 StartupTime: 130730081973252112, currentInstance : ad-w3wp-msexchangepowershellapppool(9E48CD5A) RefCount=0 SpinLock=0 Offset=35592, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 15084, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 15084 StartupTime: 130730081886009912, currentInstance : rpca-w3wp-msexchangeoabapppool(8149E8D2) RefCount=0 SpinLock=0 Offset=35264, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 15084, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 15084 StartupTime: 130730081886009912, currentInstance : mb-w3wp-msexchangeoabapppool(58D0A79D) RefCount=0 SpinLock=0 Offset=34936, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 15084, counter : time in resource per second Value=55883 SpinLock=0 Lifetime=Type: 1 ProcessId: 15084 StartupTime: 130730081886009912, currentInstance : ad-w3wp-msexchangeoabapppool(CC31A917) RefCount=0 SpinLock=0 Offset=34608, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 14948, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 14948 StartupTime: 130730081557522734, currentInstance : rpca-w3wp-msexchangepowershellfrontendapppool(E1115251) RefCount=0 SpinLock=0 Offset=34280, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 14948, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 14948 StartupTime: 130730081557522734, currentInstance : mb-w3wp-msexchangepowershellfrontendapppool(34B9187E) RefCount=0 SpinLock=0 Offset=33952, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 14948, counter : time in resource per second Value=1576 SpinLock=0 Lifetime=Type: 1 ProcessId: 14948 StartupTime: 130730081557522734, currentInstance : ad-w3wp-msexchangepowershellfrontendapppool(FAEFA1B4) RefCount=0 SpinLock=0 Offset=33624, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 13332, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 13332 StartupTime: 130730081246077528, currentInstance : rpca-msexchangehmhost-msexchangehmhost.exe(87A5B053) RefCount=0 SpinLock=0 Offset=33296, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 13332, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 13332 StartupTime: 130730081246077528, currentInstance : mb-msexchangehmhost-msexchangehmhost.exe(FB9D599C) RefCount=0 SpinLock=0 Offset=32968, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 13332, counter : time in resource per second Value=20422 SpinLock=0 Lifetime=Type: 1 ProcessId: 13332 StartupTime: 130730081246077528, currentInstance : ad-msexchangehmhost-msexchangehmhost.exe(4E220B96) RefCount=0 SpinLock=0 Offset=32640, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 27800, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 27800 StartupTime: 130732559851229547, currentInstance : rpca-noderunner-contentenginenode1(316BF6E3) RefCount=1 SpinLock=0 Offset=32312, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 27800, counter : time in resource per second Value=250572035 SpinLock=0 Lifetime=Type: 1 ProcessId: 27800 StartupTime: 130732559851229547, currentInstance : mb-noderunner-contentenginenode1(2EE8286C) RefCount=1 SpinLock=0 Offset=31984, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 27800, counter : time in resource per second Value=309575 SpinLock=0 Lifetime=Type: 1 ProcessId: 27800 StartupTime: 130732559851229547, currentInstance : ad-noderunner-contentenginenode1(61591E6) RefCount=1 SpinLock=0 Offset=31656, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 21596, counter : time in resource per second Value=276568 SpinLock=0 Lifetime=Type: 1 ProcessId: 21596 StartupTime: 130732616321024370, currentInstance : ad-msexchangehmworker-msexchangehmworker.exe(712B0516) RefCount=1 SpinLock=0 Offset=31328, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 21596, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 21596 StartupTime: 130732616321024370, currentInstance : mb-msexchangehmworker-msexchangehmworker.exe(6177C09C) RefCount=1 SpinLock=0 Offset=31000, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 21596, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 21596 StartupTime: 130732616321024370, currentInstance : rpca-msexchangehmworker-msexchangehmworker.exe(39325ED3) RefCount=1 SpinLock=0 Offset=30672, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 8068, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 8068 StartupTime: 130730079342620471, currentInstance : rpca-umworkerprocess-umworkerprocess.exe(970CCE33) RefCount=0 SpinLock=0 Offset=30344, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 8068, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 8068 StartupTime: 130730079342620471, currentInstance : mb-umworkerprocess-umworkerprocess.exe(8A7F8A3C) RefCount=0 SpinLock=0 Offset=30016, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 8068, counter : time in resource per second Value=489 SpinLock=0 Lifetime=Type: 1 ProcessId: 8068 StartupTime: 130730079342620471, currentInstance : ad-umworkerprocess-umworkerprocess.exe(95818B6) RefCount=0 SpinLock=0 Offset=29688, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 16348, counter : time in resource per second Value=393256 SpinLock=0 Lifetime=Type: 1 ProcessId: 16348 StartupTime: 130730082964967615, currentInstance : ad-w3wp-msexchangeecpapppool(B648688D) RefCount=0 SpinLock=0 Offset=29360, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 16348, counter : time in resource per second Value=4885 SpinLock=0 Lifetime=Type: 1 ProcessId: 16348 StartupTime: 130730082964967615, currentInstance : mb-w3wp-msexchangeecpapppool(E27E6507) RefCount=0 SpinLock=0 Offset=29032, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 16348, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 16348 StartupTime: 130730082964967615, currentInstance : rpca-w3wp-msexchangeecpapppool(57806648) RefCount=0 SpinLock=0 Offset=28704, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 3160, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3160 StartupTime: 130732607510143268, currentInstance : rpca-msexchangetransport-msexchangetransport.exe(24F56C33) RefCount=1 SpinLock=0 Offset=28376, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 3160, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3160 StartupTime: 130732607510143268, currentInstance : mb-msexchangetransport-msexchangetransport.exe(92FB3D3C) RefCount=1 SpinLock=0 Offset=28048, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 3160, counter : time in resource per second Value=42 SpinLock=0 Lifetime=Type: 1 ProcessId: 3160 StartupTime: 130732607510143268, currentInstance : ad-msexchangetransport-msexchangetransport.exe(2447ECB6) RefCount=1 SpinLock=0 Offset=27720, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 7008, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7008 StartupTime: 130730079088089233, currentInstance : rpca-microsoft.exchange.um.callrouter-microsoft.exchange.um.callrouter.exe(E8475353) RefCount=0 SpinLock=0 Offset=27392, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 7008, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7008 StartupTime: 130730079088089233, currentInstance : mb-microsoft.exchange.um.callrouter-microsoft.exchange.um.callrouter.exe(8F65881C) RefCount=0 SpinLock=0 Offset=27064, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 7008, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7008 StartupTime: 130730079088089233, currentInstance : ad-microsoft.exchange.um.callrouter-microsoft.exchange.um.callrouter.exe(78F52196) RefCount=0 SpinLock=0 Offset=26736, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 8116, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 8116 StartupTime: 130730078965276725, currentInstance : rpca-umservice-umservice.exe(E39A1133) RefCount=0 SpinLock=0 Offset=26408, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 8116, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 8116 StartupTime: 130730078965276725, currentInstance : mb-umservice-umservice.exe(FFBB273C) RefCount=0 SpinLock=0 Offset=26080, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 8116, counter : time in resource per second Value=555 SpinLock=0 Lifetime=Type: 1 ProcessId: 8116 StartupTime: 130730078965276725, currentInstance : ad-umservice-umservice.exe(9A8AC6B6) RefCount=0 SpinLock=0 Offset=25752, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 7900, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7900 StartupTime: 130730078996839212, currentInstance : rpca-microsoft.exchange.store.worker-microsoft.exchange.store.worker.exe(ABB009B3) RefCount=0 SpinLock=0 Offset=25424, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 7900, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7900 StartupTime: 130730078996839212, currentInstance : mb-microsoft.exchange.store.worker-microsoft.exchange.store.worker.exe(38BA31BC) RefCount=0 SpinLock=0 Offset=25096, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 7900, counter : time in resource per second Value=218529 SpinLock=0 Lifetime=Type: 1 ProcessId: 7900 StartupTime: 130730078996839212, currentInstance : ad-microsoft.exchange.store.worker-microsoft.exchange.store.worker.exe(11106236) RefCount=0 SpinLock=0 Offset=24768, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 7204, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7204 StartupTime: 130730078901370474, currentInstance : rpca-msexchangetransportlogsearch-msexchangetransportlogsearch.exe(EF66F2D3) RefCount=0 SpinLock=0 Offset=24440, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 7204, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7204 StartupTime: 130730078901370474, currentInstance : mb-msexchangetransportlogsearch-msexchangetransportlogsearch.exe(B020391C) RefCount=0 SpinLock=0 Offset=24112, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 7204, counter : time in resource per second Value=611 SpinLock=0 Lifetime=Type: 1 ProcessId: 7204 StartupTime: 130730078901370474, currentInstance : ad-msexchangetransportlogsearch-msexchangetransportlogsearch.exe(20578116) RefCount=0 SpinLock=0 Offset=23784, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 4868, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4868 StartupTime: 130730078594026714, currentInstance : rpca-microsoft.exchange.imap4service-microsoft.exchange.imap4service.exe(128A1B3) RefCount=0 SpinLock=0 Offset=23456, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 4868, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4868 StartupTime: 130730078594026714, currentInstance : mb-microsoft.exchange.imap4service-microsoft.exchange.imap4service.exe(B4CBDCBC) RefCount=0 SpinLock=0 Offset=23128, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 4868, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4868 StartupTime: 130730078594026714, currentInstance : ad-microsoft.exchange.imap4service-microsoft.exchange.imap4service.exe(F0E98836) RefCount=0 SpinLock=0 Offset=22800, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 5764, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5764 StartupTime: 130730078701682966, currentInstance : rpca-microsoft.exchange.pop3service-microsoft.exchange.pop3service.exe(8961F613) RefCount=0 SpinLock=0 Offset=22472, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 5764, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5764 StartupTime: 130730078701682966, currentInstance : mb-microsoft.exchange.pop3service-microsoft.exchange.pop3service.exe(3C128D5C) RefCount=0 SpinLock=0 Offset=22144, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 5764, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5764 StartupTime: 130730078701682966, currentInstance : ad-microsoft.exchange.pop3service-microsoft.exchange.pop3service.exe(96BB056) RefCount=0 SpinLock=0 Offset=21816, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 7040, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7040 StartupTime: 130730078816526722, currentInstance : rpca-msexchangethrottling-msexchangethrottling.exe(8C1DA893) RefCount=0 SpinLock=0 Offset=21488, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 7040, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7040 StartupTime: 130730078816526722, currentInstance : mb-msexchangethrottling-msexchangethrottling.exe(AB2BADDC) RefCount=0 SpinLock=0 Offset=21160, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 7040, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7040 StartupTime: 130730078816526722, currentInstance : ad-msexchangethrottling-msexchangethrottling.exe(8962F4D6) RefCount=0 SpinLock=0 Offset=20832, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 6536, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6536 StartupTime: 130730078769807986, currentInstance : rpca-msexchangesubmission-msexchangesubmission.exe(60747EB3) RefCount=0 SpinLock=0 Offset=20504, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 6536, counter : time in resource per second Value=159000 SpinLock=0 Lifetime=Type: 1 ProcessId: 6536 StartupTime: 130730078769807986, currentInstance : mb-msexchangesubmission-msexchangesubmission.exe(67B4173C) RefCount=0 SpinLock=0 Offset=20176, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 6536, counter : time in resource per second Value=273020 SpinLock=0 Lifetime=Type: 1 ProcessId: 6536 StartupTime: 130730078769807986, currentInstance : ad-msexchangesubmission-msexchangesubmission.exe(85200236) RefCount=0 SpinLock=0 Offset=19848, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 4420, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4420 StartupTime: 130730078654651715, currentInstance : rpca-microsoft.exchange.imap4-microsoft.exchange.imap4.exe(EAAB5DD3) RefCount=0 SpinLock=0 Offset=19520, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 4420, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4420 StartupTime: 130730078654651715, currentInstance : mb-microsoft.exchange.imap4-microsoft.exchange.imap4.exe(1FC2541C) RefCount=0 SpinLock=0 Offset=19192, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 4420, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4420 StartupTime: 130730078654651715, currentInstance : ad-microsoft.exchange.imap4-microsoft.exchange.imap4.exe(17E0EA16) RefCount=0 SpinLock=0 Offset=18864, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 6160, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6160 StartupTime: 130730078749026715, currentInstance : rpca-w3wp-msexchangeservicesapppool(E8BBF810) RefCount=0 SpinLock=0 Offset=18536, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 6160, counter : time in resource per second Value=1867617 SpinLock=0 Lifetime=Type: 1 ProcessId: 6160 StartupTime: 130730078749026715, currentInstance : mb-w3wp-msexchangeservicesapppool(10FE94BF) RefCount=0 SpinLock=0 Offset=18208, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 6160, counter : time in resource per second Value=3331874 SpinLock=0 Lifetime=Type: 1 ProcessId: 6160 StartupTime: 130730078749026715, currentInstance : ad-w3wp-msexchangeservicesapppool(E0DE475) RefCount=0 SpinLock=0 Offset=17880, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 10132, counter : time in resource per second Value=84124 SpinLock=0 Lifetime=Type: 1 ProcessId: 10132 StartupTime: 130730079880745472, currentInstance : ad-w3wp-msexchangerpcproxyapppool(99BB8ED6) RefCount=0 SpinLock=0 Offset=17552, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 10132, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 10132 StartupTime: 130730079880745472, currentInstance : mb-w3wp-msexchangerpcproxyapppool(B190F21C) RefCount=0 SpinLock=0 Offset=17224, categoryName: MSExchange Activity Context Resources A process is holding onto a transport performance counter. processId : 10132, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 10132 StartupTime: 130730079880745472, currentInstance : rpca-w3wp-msexchangerpcproxyapppool(8B7590B3) RefCount=0 SpinLock=0 Offset=16896, cate...</Data>
    </EventData>
    </Event>
    https://support.microsoft.com/en-us/kb/2870416/
    I used method
    1, but it did not help
    me.
    Method 2:
    [PS] C:\Windows\system32>Add-Pssnapin Microsoft.Exchange.Management.PowerShell.Setup
    [PS] C:\Windows\system32>New-PerfCounters -definitionfilename "C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf
    \GlsPerformanceCounters.xml"
    New-PerfCounters : The performance counter definition file C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\GlsPerformanceCounters.xml could not be found.
    Any idea ?
    Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Проголосовать за полезное сообщение"

Maybe you are looking for