Error in Create Operation in SUP MBO Developement

Hi all,
I have created MBO with getlist RFC and I have created CREATE operation for that MBO using CREATE RFC. After that i have created two screens one for getlist and one for create. In the create screen i have configured the submit button action to Synchronize opreation. From simulator i have create one customer but it was not sync with backend it was in pending operations.( In the Synchronize opration screen i have uncheckd the Place the operation in pending state). I did manually submit operations but nothing happened.
Please help me to resolve this.
Thanks,
Ram

Hi Ram,
In the place where you created Synchronize action for your submit button, there will be options. One such option says "Synchronize pending operations when greater than " in that give the value as "1". So whenever it sees one single pending operation it immediately submits that operation to backend. Similarly you can configure that to any number and once those many pending operations reaches then SUP will submit them to Backend.
Regards,
Siva.

Similar Messages

Error when create Operating Concern

Hi Experts;
At the time of creating a new operating concern after i have defined Characteristics and Value Fields, and checking the status I received the following error:
Error generating table KOMPAKE
Message no. KE434
Diagnosis
An error occurred while Table KOMPAKE was being generated.
Procedure
Analyze the error using Transaction SE11. Use the function 'Check'.
Then I wen to SE11 to check giving the table name as mentioned above, I found the following and could not fix the error;
Then after opening the Long Text it gave the following message:
Enhancement category for table missing
Message no. DT192
Procedure
Maintain the enhancement category in the table or structure maintenance in the ABAP Dictionary.
Then by opening the ((enhancement category)) link i received the following message then STOPPED where I could not do anything more!!!
Enhancement Category Selection
Definition
Structures and tables that were defined by SAP in the ABAP Dictionary can be enhanced subsequently by customers using Customizing includes or append structures. The enhancements do not only refer to structures/ tables themselves, but also to dependent structures that adopt the enhancement as an include or referenced structure. Append structures that only take effect at the end of the original structure can also cause shifts - in the case of dependent structures - even within these structures.
You must select an enhancement category for the following reason: In programs where there is no active Unicode check, enhancements to tables and structures can cause syntax and runtime errors during type checks and particularly in combination with deep structures.
In programs where there is an active Unicode check, statements, operand checks, and accesses with an offset and length are problematic - for example, if numeric or deep components are inserted into a purely character-type structure and the structure thus loses its character- type nature.
Depending on the structure definition, the radio buttons allowed in the dialog box are ready for input. Choose one of the possible enhancement categories:
Cannot be enhanced
The structure must not be enhanced.
Can be enhanced or character type
All structure components and their enhancements must be character-type (C, N, D, or T). The original structure and all enhancements through Customizing includes or through append structures are subject to this limitation.
Can be enhanced or character-type or numeric
The structure and its enhancement must not contain any deep data types (tables, references, strings).
Can be enhanced in any way
The structure and its enhancement may contain components whose data type can be of any type.
Not classified
This category can be chosen, for example, for a transition status; however, it must not be chosen for creating structures.
The rules for defining the enhancement category result implicitly from the structure setup and the classification of the types used. These rules are as follows:
If the object contains at least one numeric type or a substructure or component (field has a structure/table/view as its type) that can be enhanced numerically, the object can no longer be enhanced character-type, but is itself, at most, enhanceable character-type or numeric.
If the object contains a deep component (string, reference, or table type), or it contains a substructure or component that is marked as enhanceable in any way, then the object itself is enhanceable in any way.
If the object does not contain any substructure or component that is marked as enhanceable, you can select cannot be enhanced. If the structure has not yet been enhanced, you can choose the category cannot be enhanced in any case.
If you are creating new tables and structures in the ABAP Dictionary, the system proposes the category can be enhanced in any way as standard value for the classification of the enhancement options. If the developer chooses a more restrictive classification than can be enhanced in any way for a particular structure, then only the classification levels that adhere to the rules above are allowed. It is not possible to choose an enhancement option of a structure that is more restrictive than the classification resulting immplicitly from the structure setup and from the classification of the types used. Therefore, only the allowed categories are proposed for selection in the maintenance user interface.
If a structure depends on one or several other structures, the smallest category is chosen as implicit classification (in the order cannot be enhanced < can be enhanced and character-type < can be enhanced and character-type or numeric < can be enhanced in any way). This classification is greater than or less than the category in the other structures and also greater than or the same as the category that results from the actual setup in the original structure itself.
For more information, refer to the online documentation (pushbutton "i").
Thanks in advance;
Best regards;
Ahmad Mahmud;

Hi Mahmud,
You may need to refer this issue to ABAPer..
Regards
Mohit

Error while creating a Development plan template

Hi Gurus,
I am facing errors while creating Development Plan Template.
This is how it goes :
When i click on Define Forms for Talent Assessment --> a wizard pops up & i select Development Plan :
In first step, I am giving Title,Integration with SAP Learning Solution (check) & a rating scale.
Now after clicking next, I am adding 2 development areas :
1) Training
2) Mentoring,
now as soon as I'm clicking on End Configuration, It displays 2 errors & 1 warning message :
error1 : Element Appraisal Template 'XXXXX' contains errors.Cannot change status.
error2 : Value type 000000XXX of value class Q does not exists
Warning 1 : You have maintained a description that is not displayed.
In PHAP_CATALOG, when I'm trying to manually release the Criterion Group (VB) or Appraisal template (VA), it does not allow me to do it.
Kindly let me know how to proceed further.
Regards
bharti

Hi,
Even though it gives the error,the new RTF template is uploaded and it is reflected when I query the template again.
But when I run the Concurent program and see the output,the output still shows me the old template.
Regards
Jujaar

Error while creating PO in operation subcontracting

I am getting an Error while creating PO in operation subcontracting.When I'm trying to convert the purchase requisition for the operation in the routing into a Purchase order it gives me the error "Not possible to determine any components".Please guide me why I am getting this error. I have already assigned the component to the operation in the routing. I also have this component in stock. But no Idea why I'm getting this error

Hi Sam,
please check ,
Assign a recursive BOM for the material for which you want to create the purchase order .ie. create a BOM of mat say X having a component X and marking the indicator recursive ticked.
Please create the BOM which is valid much before the date of creating a purchase requisition .
And proceed for the creation of subcontract purchase requisition.
Please Revert back, if the problem is solved.
OMKAR

Error while creating model classes, operation aborted in NWDS

Hi All,
When i select Adaptive rfc 2 model and then search for the RFC, when i select RFC and click on next i get an error while importing :
Error while creating model classes, operation aborted.
It is working fine in visual composer and i have activated function module, RFC but getting same error. It is also working in web service navigator also.
Can any one help me out??
Regards,
Pradeep kumar
Edited by: pradeep_546 on Feb 17, 2011 9:35 PM
Edited by: pradeep_546 on Feb 17, 2011 9:36 PM
Edited by: pradeep_546 on Feb 17, 2011 9:37 PM

Hai guys thanks for reply
Tushar,
I am using NWDS 7.2, ce7.2 server, ECC 6.0.
Amit,
I have tested the JCO destinations they are working fine and i created a new pair of JCO destinations but unable to import the Adaptive RFC2 Model gives same error but Adaptive webservices are working fine in my NWDS7.2
Deepak,
I am unable to create model in other projects also.
I have sufficient amount of memory in my drive.
I have imported the DC to other NWDS but it gives same error.
Thanks for all,
Regards,
Pradeep Kumar G
Edited by: pradeep_546 on Feb 18, 2011 3:05 PM

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

https://discussions.apple.com/thread/6219522

Creating Protection Group Fails with Error:360 The operation failed due to a virtual disk service error

Hello
I'm setting up a DPM server (2012 R2) at a remote site; everything goes well with no issues until a protection group is created, at which point I get the following error;
Create protection group: Protection Group 1 failed:
Error 360: The operation failed due to a virtual disk service error
Error details: The system cannot find the file specified
Recommended action: Retry the operation.
The environment is as follows;
- Virtual Machine Running Server 2008 R2 Fully updated
- Storage Pool is an iSCSI connection Thick Provisioned 1TB GPT and shows in Disk Management with no issues.
- Have connected to Session 0 (console)
- Error log shows The provider did not receive a Plug and Play service notification for the volume. volume=10 for the VDS Dynamic Provider
Can Anyone Help?
Thanks
.Adam Langdon

Hi,
Disk defrag is initiated when a volume shrink is attempted. See if there is any problem defragging a volume and correct any problems doing that.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Error in nw installation create operation system accounts

hi expert!!
i installing nw when i try to create operation system account ,i get following this error:
ERROR 2008-04-18 11:53:08
FSL-01002 Unable to create account cg15\SAPServiceEPL. HRESULT=0x80005009
ERROR 2008-04-18 11:53:08
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2008-04-18 11:53:08
FCO-00011 The step createAccounts with step key |NW_Users_Create|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0|createAccounts was executed with status ERROR .
pls give me solution and looking forward to responce
thanks !!!!

HI,
is your machine in Domain..or you perform local installation ?
check whether user have administrator rights or not?
regards,
kaushal

Error in bulding a DC created in WTS under Local Development

Hi,
I've created a DC under Local Development in WTS.But when I tried to build it,I am getting the error "No javac found for JDK home path 'C:\Program Files\Java'".
Please help me to get the soln. for the above problem.
Thanks in advance.

Hi Divya,
You could try with the Console Administrator. Open a command prompt and execute:
telnet localhost 50008
[login]
> jump 0
> startservice webdynpro
Now you can check the status like this:
> lss | grep webdynpro
If it is still stopped check /usr/sap/<SID>/<instance>/j2ee/cluster/server<N>/log/defaultTrace.trc and /usr/sap/<SID>/<instance>/j2ee/cluster/server<N>/log/system/server.log for errors.
HTH,
Vladimir
PS: Please consider rewarding points for helpful answers.

I have an error when creating new folders, it renames the folder below it to the same name (super - next folder - parent's next sibling...)

if I try to add a new folder to a sub folder, the program does add the new bookmark folder, but it also renames the next folder in line in the parent of the original "subfolder" to the exact same name...
maybe I just need to reload the mozilla, maybe I was hacked and that is what they changed...
I also have a similar problem with microsoft explorer, every time I try to add a new folder it gives it a starting wierd name besides "New Folder"
I have an error when creating new folders, it renames the folder below it to the same name (super - next folder - parent's next sibling...)

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Product: BusinessObjects Edge Series 3.0 -- Error 2902. Operation ixfAssemb

Good Afternoon.
I want to upgrade XIR3 to XIR3.1 for enabling IIS+SSO with Active Directory.
But when I want to upgrade my system, I have the Following error:
Product: BusinessObjects Edge Series 3.0 -- Error 2902. Operation ixfAssemblyCopy called out of sequence.
Windows Server 2003 SP2 (Fully Patched)
BusinessObjects Edge Standard XI 3.0 Windows (working)
Patch I want to Install: 51036069.exe ,BusinessObjects Enterprise XI 3.1 FixPack 1.1 - WIN - INTL
Thanks in advance for your help

Hi All,
Please clarify my following doubt,
We are migrating from BO 6.5 to BO XI 3.1 intergrating with our application.
I want to use the COM XI 3.1 SDK for the Desktop Intelligence. I did some code changes in the previous 6.5 SDK which we already used.
Say, I changed the LoginAs() method to Logon() in the C++ file.When I tried to create the .dll file using Visual Studio 6.0, I got the following error,
'Logon' is not the member of Application class.
From this message, I understood that, still Application class of BO 6.5 was used and not BO xi and some libraries were also missing.
Please correct me, if my understanding is wrong.
Where can I get the BO xi 3.1 com SDK for DESKI? When searched in SAP portal, I get only the API reference and Developer guides.
Thanks.

Error at Creat asinstance When installing oracle forms 11g on linux

Hello all experts!!!,
i am installing oracle weblogic forms 11g on linux platform and i am getting error at Create as instance step.
components selected :--
forms ,reports,form builder report builder enterprise manager
OS Platform :-- Oracle Enterprise Linux 5.3 and also same error on Fedora Core 13
i have also Oracle Database 11g R2 installed on same machine.
the log says :---
[2010-09-13T12:55:38.831+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 55] [ecid: 0000Ig9xHTOFw000jzwkno1CZRTb00000i,0] [[
oracle.as.config.ProvisionException: Unable to validate NonJ2EEManagement Application deployment on admin server.
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:678)
at oracle.as.config.impl.RuntimeServiceConnection.deployIfNecessary(RuntimeServiceConnection.java:192)
at oracle.as.config.impl.OracleASInstanceImpl.create(OracleASInstanceImpl.java:92)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:249)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:215)
at oracle.as.install.classic.ca.standard.StandaloneTool.execute(StandaloneTool.java:50)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.config.utl.DeployerException: NonJ2EEManagement Applicationdeployment failed.
at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:95)
at oracle.as.config.utl.Deployer.deploy(Deployer.java:52)
at oracle.as.config.impl.RuntimeServiceConnection.deployNonj2eeApplication(RuntimeServiceConnection.java:219)
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:670)
... 21 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:93)
... 24 more
Caused by: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
at weblogic.Deployer.run(Deployer.java:72)
... 29 more
Caused by: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
at weblogic.deploy.api.tools.deployer.Jsr88Operation.report(Jsr88Operation.java:541)
at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:140)
at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.Deployer.run(Deployer.java:70)
... 29 more
[2010-09-13T12:55:38.838+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 55] [ecid: 0000Ig9xHTOFw000jzwkno1CZRTb00000i,0] Exit code from OPMNAdmin : 0
[2010-09-13T12:55:38.844+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 55] [ecid: 0000Ig9xHTOFw000jzwkno1CZRTb00000i,0] [[
oracle.as.provisioning.engine.CfgWorkflowException
at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:178)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:215)
at oracle.as.install.classic.ca.standard.StandaloneTool.execute(StandaloneTool.java:50)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.util.ConfigException:
Error creating ASInstance asinst_1.
Cause:
An internal operation has failed: Unable to validate NonJ2EEManagement Application deployment on admin server.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:317)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
... 17 more
Caused by: oracle.as.config.ProvisionException: Unable to validate NonJ2EEManagement Application deployment on admin server.
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:678)
at oracle.as.config.impl.RuntimeServiceConnection.deployIfNecessary(RuntimeServiceConnection.java:192)
at oracle.as.config.impl.OracleASInstanceImpl.create(OracleASInstanceImpl.java:92)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:249)
... 18 more
Caused by: oracle.as.config.utl.DeployerException: NonJ2EEManagement Applicationdeployment failed.
at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:95)
at oracle.as.config.utl.Deployer.deploy(Deployer.java:52)
at oracle.as.config.impl.RuntimeServiceConnection.deployNonj2eeApplication(RuntimeServiceConnection.java:219)
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:670)
... 21 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:93)
... 24 more
Caused by: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
at weblogic.Deployer.run(Deployer.java:72)
... 29 more
Caused by: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
at weblogic.deploy.api.tools.deployer.Jsr88Operation.report(Jsr88Operation.java:541)
at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:140)
at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.Deployer.run(Deployer.java:70)
... 29 more
weblogic server installation is perfect no errors at all.
i also got the errors i got during installation ( im_emagent.mk and while running command gcc) . but thanks to OTN Forums i had managed to find out a fix. but on this error only solution i got is
TRY WINDOWS . but what about linux then? is there any solution on this error?
i am not much used to front-end ( java i mean). i am Oracle DBA Actually n want to install n try Weblogic
Kindly Help...

You can just copy the relevant parts (the ones marked with error). You can also look at the timing
when it happened the reports environment did not start.
From what i remember this could be a memory issue, standard every managed server (WLS_FORMS and WLS_REPORTS) instance
is configured with 1024m bytes of memory.
What we did is first install a forms instance and after that a reports instance. After the forms installation we adjusted the
memory parameters in setWLSEnv (<middleware-home>/user_projects/domains/<domain-name>/bin). Look in this file
for references to WLS_FORMS (something similar to: if [ "${SERVER_NAME}" = "WLS_FORMS" ] ; then).
Another thing which springs to my mind is, which products did you select. If you just want Forms and Reports
you can select just the following:
- Oracle Forms
- Oracle Reports
- Developer Tools aan.
- Management Components
- Oracle HTTP Server
and deselect the other options:
- Oracle Portal
- Oracle Discoverer
- Oracle WebCache
- Clustered (if you are not using clustering)
We also had to fix the following files (i do not think that you have to do this since your Forms did not show any problems):
- (On Windows) Copy the file msvcr71.dll (FMW/windows/extra) to WINDOWS/system32.
- Copy the file mod_wl_ohs.so (FMW/<operating-system>/extra) to <middleware-home>/as_1/ohs/modules.

Error when integrating the generated SUP code in Visual Studio

Hi,
I am working on SUP2.1 and trying to create a Windows Mobile Application. I have created MBOs and generated the code successfully. Now, when I am trying to integrate the generated code with the client application in Visual Studio, I am getting an error: "File or assembly name 'sup-client, Version=1.5.2.0, Culture=neutral, PublicKeyToken=F7584B9EEA15C033', or one of its dependencies, was not found"
Does anybody has any idea on this? Any help is appreciated!

If I memory servers, you have to open the Crystal_Regwiz2003.msm in the .NET deployment project. One of the properties of the msm was Keycode (or similar). You entered the keycode here. To find your keycode; in VS2003 IDE, go to the Help | About screen. You will see one of the installed components as Crystal Reports and the keycode will be on the right of that. Copy the keycode from here, paste in the above.
For more details see the article Crystal Reports and Visual Studio .NET - Application Deployment.
- Ludek
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Share Your Knowledge in SCN Topic Spaces

CE 7.30, CM Services/CTS+: Error when creating DEV system in STMS

Hi,
first of all: Happy new year
This is our scenario:
CM Services are running under CE 7.30 and CTS+ is running on PI 7.11 system (Support Package 7).
I followed this guide to configure CTS+ on our PI 7.11 system:
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b08abb67-0e34-2d10-78b8-e7246ad93fb2|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b08abb67-0e34-2d10-78b8-e7246ad93fb2]
When we create the DEV system in STMS, we tick the checkbox "Development configuration" and give the URL to the SLD of our CE system (http://sapt62.xxx.com:56200/sld/).
But when the changes are distributed (I guess that's the time when the CM development configuration is created in the CE system), we get the following error message:
com.sap.di.cts.config.service.core.exception.DIConfReadNameServerException: "Unable to read name server from landscape directory "http://sapt62.xxx.com:56200/sld" using user "NWDI_CMSADM" [DICONF_READNAMESERVER]: Received response is not a CIM Operation Response! Check "http://sapt62.xxx.com:56200/sld/" is the correct URL for the SLD CIM Object Manager (default is "http://sapt62.xxx.com:56200/sld/cimom") and that user "NWDI_CMSADM" has access to the SLD via http and is not required to change his/her password.
What can be the reason for that?
The password for user NWDI_CMSADM is configured correctly on the CTS+ system.
Could it be that the username/password for NWDI_CMSADM is configured somewhere in SLD?
After the DEV system has been created we click on the "Development Configuration" button in STMS, the browser pops up with the CM Services and the following message:
Missing application ID
Thanks in advance!

I've seen now that a Development configuration has been created in our CE system.
But I cannot open it from STMS on our CTS+ system, because it gives me the "Missing application ID" message in the popping up browser.
Is that normal?
Another thing I've discovered:
When I try to use the "Synchronize service" functionality for my CTS Dev Conf to load the missing SCA files, I always get this message when I click on "next":
Failed to process the request: Request refers to an unknown session
When I use the "Import service" instead, it gives me a NullPointer exception:
java.lang.NullPointerException: while trying to invoke the method java.lang.String.hashCode() of an object loaded from field com.sap.engine.session.AbstractSessionHolder.sessionId of an object loaded from local variable 'this'

Error while creating a recipe in plm..

Hi every one,
System throughing below error while creating a recipe.
"Entries in status management Customizing are incorrect"
kindly suggest.
have a good day..
regards,
kirran

Hi Kirran,
Please see if you have defined a status scheme and assigned it to the recipe type. Before defining a status scheme, you must complete the one time IMG activity 'Collect Object Types and Assigned Attributes' under Recipe Development > Status Management. Then in the next node you define individual statuses and a scheme with transitions. For each status, you must define 'field value' for the field RCP_USAGE which is nothing but a value from Recipe Purposes customizing.
Hope this helps.
Regards,
Rajeev

Error in Create Operation in SUP MBO Developement

Similar Messages

Maybe you are looking for