Error in creating a Merge Document

Hello, I am creating a merge document and want to use a numbers doc for the data source. I created the numbers document and Saved it. Then created the pages doc. Went to inspector and choose the link, browsed to my numbers doc, selected it, then clicked open; I get an error that says:
Please select a numbers document that has one or more named header columns and one or more rows of data.
My only option is to click ok, which I do, then am bnack at using the address book for my data source.
What is wrong -- anybody?

Katfan,
Three most common errors:
. Field names not in the Header row (not just the top row, but the top row being a Header row).
. Table not being the first listed table for the Sheet in the Sheets Pane. It doesn't matter where the Table is on the Sheet, but if it's not the only Table on that sheet, it must be the First Table in the list for that sheet. You can drag the name to the top of the list.
. And finally, not Saving the Numbers file before Merging in Pages.
Jerry
Message was edited by: Jerrold Green1

Similar Messages

  • Creating a merge document in Pages 09

    In trying to learn how Pages operates, I have been looking at creating a Merge document using my Contacts Book. So far so good.
    I am trying to get a list of names and addresses so that a round robin can be created, but in selecting the necessary fields to use I find they are all in the American terminology! When creating an input into Contacts, it is showing the UK method, i.e County and Post Code etc. but not when I go to Inspector and try and insert the field. Is there a way of changing the standard field name in the drop down menu?
    Thanks
    altv

    It would appear that that hasn't been customised.
    Apple apparently doesn't have enough cash in its kitty to do a lot of this basic stuff.
    e.g. Apple has a so called "Australian" dictionary in Pages, that doesn't recognise Anzac amongst a host of Australian words. Why? Because it is nothing but the British dictionary relabelled.
    Microsoft on the other hand…
    If you want to ensure it looks right in Pages you can use the word Postcode in the text, select it:
    Inspector > Link > Merge > Choose > Contacts Book > click on the + > call it Postcode > Link it to Work/Home ZIP
    Peter

  • Error in creating the payment document; read job log

    Hi All,
    Recently we are upgraded to EHP4 pack. While running the payment proposal for the vendor I am getting the error 007 "Error in creating the payment document;read job log" Details of job log is as follows
    >            Due date determination additional log
    > Document 1100001518 line item 001 via ILS          694.00-
    > Terms of payment: 05/23/2011   60  0.000 %    0  0.000 %    0
    >  01 days grace period is being considered
    >  Maximum cash discount should always be taken
    >   Payment must take place before 07/23/2011; next payment on 07/27/2011
    > Item is due with 0.000 % cash discount
    Internal error: doc.balance not zero / comp.code SNXL vendor 1009530510 customer
    Balances:        2,052.00- ILS /        2,052.00- ILS
    >
    >            Posting documents additional log
    >  Currencies in line 1: ILS / ILS  Currencies in line 2: USD / ___
    > Document  company code SNXL currency ILS payment method T
    >  LIt PK Acct         RA            Amount            Tax
    >
    >  001 38 2001520500               3,420.00              0.00
    >                                  1,002.02              0.00
    >  002 50 0032118400               1,026.00              0.00
    >                                    297.21              0.00
    >  003 25 2001520500              72,645.00              0.00
    >                                 20,879.23              0.00
    >  004 50 0032118400              21,793.50              0.00
    >                                  6,312.93              0.00
    >  005 50 0010009101              48,457.50              0.00
    >                                 14,036.70              0.00
    >  006 40 0096100000                   0.00              0.00
    >                                    769.63              0.00
    >
    Information re. vendor 1009530510 / paying company code SNXL ...
    I have checked the configuration of FBZP The configuration settings is correct. Can you please help to solve this problem
    Regards
    Girish

    Hi Girish,
    You should be having error FZ326.
    Please kindly refer to the following link in order to solve the issue:
    http://wiki.sdn.sap.com/wiki/display/ERPFI/PaymentProgram-ErrorMessageFZ326
    or
    http://wiki.sdn.sap.com/wiki/x/jY3YCw
    Apply all notes that are relevant to your support packaged.
    Kind Regards,
    Fernando Evangelista

  • F110 Error in creating the payment document; read job

    Hello
    I am running a payment run for few vendors and I am getting this error "Error in creating the payment document; read job" I have checked all the vendor acconts involved, for any blocked data but nothing is blocked. Is there any thing else that I am missing. Pleas let me know.
    Thanks

    Hi,
    To rectify ur problem u need to check follwing points...
    1. doucuments types assogned in payment method in FBZP
    2. In Ecc 6.0 u need to create document types and number ranges in N1 ledger, because new ledger is activated by system  default in this version.
    define document types in N1 ledger
    path:Spro-FA-****-Documnet-document types-define doc.types in GL view
    give ledger as N1 and enter.
    define document types whoch u were assigned in payment method in country. for doucument types u can take reference as OBA7 tcode documnet types..
    afetr that
    define document N.ranges  fro GL view
    path:Spro-FA-****-Documnet-document N.ranges-doc. in GL view-define document N.ranges  fro GL view
    enter comany code and define number ranges for doc.types
    afetr all above setting try once in F110. u will get result..
    regds
    Tony

  • F110 " Error in creating the payment document; read job log"

    Hi all,
    when i execute payment in Tcode F110, getting message " Error in creating the payment document; read job log".
    Log for payment run for payment on 30.07.2009, identification TEST1
    Error in the recovery of constants
    Information re. vendor 1000040256 / paying company code BG10 ...
    ... payment not possible because of reported error
    Because of it, the payment file is also not generated.
    The status says " Payment run has been carried out".
    But when the open items are cleared.
    What could be the reason for this error message?
    Regards,
    Vidya

    Hi,
    As the document is in the cleared status, you can try finding out with which run date and run id the documents got cleared. Go to Transaction code SE12 and give the following details - Company code, vendor code and the payment documents (clearing document for the invoice) or you can also give the invoice document numbers and fiscal year.
    The output will tell you which payment run id and run date was used to process the payment.
    Hope this will help you understand what has happened.
    Thanks and Regards,
    Anit
    Edited by: Anit Mangat on Jul 30, 2009 4:38 PM

  • Error when creating link to documents from material

    Hi all,
    while creating the purchase order the error message "Error when creating link to documents from material 61260224060" is displayed.
    why this error message is displayed.?
    Regards,
    GaneshRaja

    Hello Ganesh
    Please check material master - view 'Bases data 2'.
    There is checkbox 'No link'. You can activate this checkbox if you are not storing any drawing/designe docuemnt for this material.
    Try to do this and check out again.....
    If this helps you in resolving your issue, i would appreciate if you reward the answer with suitable points.
    Best Regards
    Avinash

  • Create data merged document with data on every second page?

    Is it possible to create a data merged document with the variable data only on every second page?
    I have set up the pages with the variable data as a master page (on every odd page) with the text box and paragraph style all set up, and I have set 'override master page items' so the data can be placed, but InDesign seems to freeze up when I try to create the merged document?

    There should be no problem doing the merge with a two-page master and a two-page template document with fields only on one page (and off the top of my head there's no reason to move them off the master page if that's where you put them). I think the problem here is that rachrachm already has a file of 500 pages (based on another thread asking how to apply masters to every other page).
    It's potentially possible to simply place the data file (without the header row) as a text file and auto-flow through the master page frames (can't say for sure without seeing the files), or if the pages without the merge fields are the same just, remove all but the first two pages from the template and do the merge.
    As I metioned earlier, though, this is a very inefficient method of producing that sort of document. A true variable data print flow would be better (you'd need to find a commercial printer who can do it with your data file), or the home version would be to make one single page file for the static content, print 250 copies (plus a few extras, just in case), then make a single page merge template, do the merge, and print that on the back of the already printed pages, or as a separate page. It is immeasurably faster to print multiple copies of a document than it is to print a document that has multiple identical pages.

  • When creating a merged document the images seem to lose their quality

    When I create a merged document, the images on the master pages seem to lose their quality, any thoughts why? Is there anyway I can prevent this.
    Example:
    becomes

    I also had another problem where when I merged the document and applied a master page to the document the column on the left seems to shrink.
    It goes from this
    to this

  • Error while creating ARE-1 document.. VERY URGENT... Pls help

    Hi,
    i had created excise invoice with BED as zero but when creating ARE-1 document i am getting an error as -
    Export under bond! Specify a bond number and year
    i tried to give the internal bond number and year in Bond/UT-1 Detail but there were no values for it , hence i also maintained the number ranges for object J_1IBOND, J_1ARE1.But still the error was not solved. Please help!!! Urgent
    Thanks & Regards,
    Ramya
    Edited by: ramya s on Apr 15, 2008 8:44 AM

    Hi,
    i had created excise invoice with BED as zero but when creating ARE-1 document i am getting an error as -
    Export under bond! Specify a bond number and year
    i tried to give the internal bond number and year in Bond/UT-1 Detail but there were no values for it , hence i also maintained the number ranges for object J_1IBOND, J_1ARE1.But still the error was not solved. Please help!!! Urgent
    Thanks & Regards,
    Ramya
    Edited by: ramya s on Apr 15, 2008 8:44 AM

  • Error while creating an held document

    Dear experts,
    While i wish to create Hold Document, i am getting following error:
    Held documents must be converted; read long text
    Message no. F5410
    Any body can fix this please
    Dasu

    Hi, Venkat
    See the full details of the error...
    Held documents must be converted; read long text
    Message no. F5410
    Diagnosis
    The structure of the document data has changed in the meantime. Before new documents can be held or held documents can be processed, the documents held up to now must be converted.
    Procedure
    The conversion of the held documents is carried out by report RFTMPBLU. For larger data volumes (more than a couple of hundred held documents), the report should be planned as a batch job.
    The conversion of held documents is generally supported for documents which were entered in release 1.3A or later.
    A conversion of older held documents is not possible. You must delete these documents with the report RFTMPBLD. Afterwards, you must start the report RFTMPBLU to activate the version management for held documents.
    If only small datasets are to be converted or deleted, you can carry out the action in another window and after completing the action, continue the current processing.

  • User getting error when creating a new Document Library

    The user is getting the following error when trying to create a new Document Library in SharePoint 2010:
    Error
    Cannot complete this action.
    Please try again.
    Correlation ID: 37ecd5eb-6129-4fa3-84bd-c6f0ad8115d5
    Has anyone come across this error and know how to resolve it?

    Hi,
    According to your post, my understanding is that the user could not create a document library.
    To narrow down whether the issue is related to the user permission, you can check which permission the user has.
    You can also assign the user full control to check whether it works.
    What’s more, did the issue occur in other sites? You can check with other sites or create a new site to check whether it works. Maybe the site has been corrupted.
    To quickly and accurately find the issue, I recommend you can check the event log and ULS log to see if anything unexpected occurred.
    For SharePoint 2010, by default, ULS log is at
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
    You can check the ULS log by the methods here:
    http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
    http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Getting error while creating shipment cost document

    Dear Guru's
    I have created STO then made delivery and then shipment. All documents are ok but when i m creating Shipment Cost document
    agains shipment getting error Enter Cost Center. Where  I should enter cost center and how can i make cost center value as a default.
    Regards,
    RM

    Hi
    On double clicking on the item level, respective item details of the material is displayed and then click SHIFT+ F6 to see the COSTCENTER in the shipement cost document.
    Configuration:
    1) In Item category configuration account assigment category is Cost Center.
    Logistics Execution>Transportation>Shipment Costs>Shipment Cost Document>Shipment Cost Types and Item Categories-->Define item categories
    2) In the Transaction code OKB9 Costcenter is assigned to the company code , in order to automate the determination of CO assignments in case of Shipment cost document creation
    Logistics Execution>Transportation>Shipment Costs>Settlement>Automatic Determination of CO Assignments
    Edited by: Bhaskar C.R on Jun 17, 2010 10:13 AM

  • How do I create a merged document using information from Numbers?

    I am new to using Mac and am trying to create a mail merged document.  I do not seem to have the same options in my Inspector that are referenced in the tutorial I found online.  Can anyone help? 

    That is because these are removed from Pages 5.
    Pages 5 is a much cut down version from the previous Pages '09.
    Pages 5 is designed to work better with the less featured iPad version.
    Peter

  • Error when creating billing / accounting document with VF01

    Hi All,
    When I use VF01 to create an invoice with reference to a LF D/N, I got the following error after saving.
    "An exchange rate type is not defined for country CN
    Message no. FF 802". And billing document is created but with no accounting document.
    I checked the exchange rate type is defined. but I can not find the place where I can assign to the specific country.
    Best Regards
    Jean

    Thanks for your help.
    Hi Dave,
    I checked in S_BCE_68000174, it has been already assigned.
    Hi Ferry,
    In FTXP, the tax code has been maintained.
    And you are right, when I maintain the field KURST in table T005, it is ok. But I am confused in 4.6C, the field KURST can be maintained by T-code OY01, but in 470, exchange rate type cannot be found in OY01. Where can I set in 470?  And why in 470, even field KURST is empty in table T005, but there is no such error when creating billing document?
    Many Thanks
    Jean

  • Error while creating instance of Document

    Hi
    I am creating a java file , in which i m creating an instance of type Document. But it is givign the error "The type Document cannot be instantiated".
    anybody can please help?
    Regadrs,
    Anupreet

    Hi Anupreet,
    If you are trying to use <b>Document doc = new Document()</b> then it is not possible cos Document is an interface. Instead use classes AbstractDocument or DefaultStyledDocument in package javax.swing.text or implement Document interface in your class.
    use code like this
    Document doc.
    doc = new AbstractDocument();
    or
    doc = new DefaultStyledDocument();
    Hope it helps you.
    Regards,
    Narinder Singh

Maybe you are looking for