Error in creating a quotation DP80

When creating a quotation for service orders that have external services, the system displays error message AD01155 "An error occured during material determination for a dynamic item". I checked the DIP profile and assigned the cost element used for external services but the error still occurs. This only happens when the service orders have an external service.
Are there additional settings needed for creating a quotation in orders that contain services in addition to materials and labor?
Any hits on how to solve this?
Thanks in advance.
Susanna

HI All,
I am also facing the Same error.
Error during material determination for service order 610000105193
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
Biswajit
Edited by: Biswajit on Sep 14, 2009 2:22 PM

Similar Messages

Error while creating a Quotation in dp81 with simulation

hi Guys,
My client has a simulation for an operative project. First a quotation was created through sales pricing in dp81. its rejected. now he wants to create another quotation with simulation. when the inputs are given its gives error as " The reference has already been completely copied or rejected". Can anyone explain why this is happening and what is the solution.

Hi,
This is might be due the completion rule of the item category of the inquiry.
Check first the item category of the inquiry sales document you are using. Second go to Tcode VOV7, completion rule field of the item category you are using should be empty in order to be able to create more than one quotation from dp81.
Regards

Error while creating a quotation in SD

i am creating a quotation referring an inquiry of type ZINO and the quotation type is ZQTO. while saving the doc i am getting a error
Pricing error: Mandatory condition ZQOE is missing.
I am not able to fix it kindly help asap.
Nikhil

Hi Nikhil,
U check for which condition type U have created condition record in VK11.
Also check for the table while creating condition record (fields in condition table)
Check once while manually entering the value for the condition in sales order, If it works.....create condition record for the same combination in VK11.
Regards,
Praveen.

Error while creating a quotation

hi
i am trying to give value for pr00 while creating a quotation in conditions tab at item level for a sales bom. its shows me an error saying requirement 2 not fulfilled for condition pr00 in pricing procedure(item category tap), where as the same material holds good while creating a order. need help.
regards
leo

Hi
This is because the Pricing Relevance field in Item Category of Quotation (AGN) may not configured properly.
Please check. Your problem will be solved.
Thanks,
Ravi

Error while creating ERP Quotation from CRM Opportunity in CRM WebUI

Dear all,
We have implemented Best Practise Scenarios but have a problem in the following: C63-Opportunity Management-Creating ERP quotation from opportunity
I have maintained all necessary customising mentioned in Best practises documnet and could select a quotation(AG) as follow on transaction from Opportunity, but get an error message " Material 23 is not defined for sales org.1000, distr.chan.10, language ENu201D in the ERP quotation screen even though material 23 is created in ERP for Sales Org 1000 & DC 10. I have downloaded the material from ECC and it is available in CRM also.
The weird thing , when the error message pops up in the ERP quotation screen if I delete the material and enter the same material, I get no error.
If I have 3 materials in opportunity then the error message is there for all the 3 materials when I create an ERP Quotation & after deleting all the 3 & reentering I get no error and am able to save ERP order.
We have CRM 2007 connected to ECC 6.0
Please help resolve the above error.
Thanks
Teyna

hi,
have you created org from middleware thorugh r/3. Is your hierarchy and category same as that mentioned in best practice documents?
Regards
Pankaj kumar

Error when Creating Sales Quotation

Hi,
I am trying to add SalesQuotation through DIAPI. I got the error code -5002 that "Item no. is missing [OQUT.ObjType]". I don't understand why because the item code is defined and the docnum value is also defined. Can anyone enlighten me on what I have done wrong?
Below is my C# Code:
public static void CreateSalesQuotation(B1DataConnection conn){
               string cardCode = "1903";
               SAPbobsCOM.Documents salesQuote = (SAPbobsCOM.Documents)conn.InternalConnection.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oQuotations);
               salesQuote.DocNum = 1030;
               salesQuote.Address="123 Warehouse";
               salesQuote.CardCode = cardCode;
               salesQuote.CardName = "Norm Thompson";
               salesQuote.ContactPersonCode = 702;
               salesQuote.DiscountPercent = 15;
               salesQuote.DocCurrency = "USD";
               salesQuote.DocDate = DateTime.Today;
               salesQuote.DocDueDate = DateTime.Today.AddMonths(1);
               salesQuote.DocType = SAPbobsCOM.BoDocumentTypes.dDocument_Items;
               salesQuote.HandWritten = SAPbobsCOM.BoYesNoEnum.tNO;
               salesQuote.JournalMemo = string.Format("Quotation : {0}",cardCode);
               salesQuote.PaymentMethod = "Checks";
               salesQuote.SalesPersonCode = 4;
               salesQuote.Lines.ItemCode = "A00004";
               salesQuote.Lines.ItemDescription = "IBM Inforprint 1222";
               salesQuote.Lines.Quantity = 50;
               salesQuote.Lines.Price = 300;
               salesQuote.Lines.WarehouseCode = "035";
               salesQuote.Lines.TaxCode = "NY";
               salesQuote.Lines.SerialNum = "25412671345";
               salesQuote.Lines.Currency = "USD";
               salesQuote.Lines.Add();
               int returnVal = salesQuote.Add();
               int errCode;
               string errMsg;
                    if(returnVal !=0){
                         conn.InternalConnection.GetLastError(out errCode, out errMsg);
                         string mesg = string.Format("Error Code: {0}; Error Message: ", errCode, errMsg);
                         Console.WriteLine(mesg);
                         return;
               Console.WriteLine("Successfully insert the sales Quotation!");
Thank you in advance,
Sunny

Hi sansanee
I assume the syntax is correct, don't know c#.
The main reason it is not working is because you said "salesQuote.Lines.Add();" when you only have one line. You only add the line if you have more than one line on your sales quote. The last line is added and taken care of when you say "salesQuote.Add();". So basicaly i'm saying that if you have 4 lines in the quote you'll have three "salesQuote.Lines.Add();" to do the first three lines then the last will be taken care of when you add the invoice.
It gives you that error because the second line has no item code because it thinks there is a second line.
Another tip, only fill in what is neccaserry, the rest it will use the defaults of the system.
Hope this helps

Error while creating SO w/r to quotation

Hi All,
When I create a sales order with reference quotation the following error occurred. In selection list also Quotation number was not displayed.
Copying is not possible because an entry is missing in Table TVCPL: LO TA TAN
Waiting for ur replies
Regards,
Ganesh
Edited by: KAGaneshbabu on Jul 15, 2011 7:28 AM

Dear Ganesh Babu,
Eventhough you have mentioned that you are copying from quotation to sales order,the error message you have given suggests thats you are facing the error while creating the delivery as TVCPL is the table for copying from sales order to delivery.
Hence kindly check in VTLA giving your document types (sales order and delivery) and check whether your item category TAN is included.
If not , check OR-LF copying control and you will find TAN.
Create a new entry for item category, enter TAN and maintain the same settings as you see in OR-LF copying control.
Check and revert back.
Thanks & Regards,
Hegal K Charles

Error while creating quotation in sales order verion ?

Dear All,
while creating an quotation in sales order version management getting an error.
Sales Doc. MsgType Message Class        Msg.No. Message text
           E       AM                        53 Specify either address number or address
           W       V1                       555 The sales document is not yet complete:
           E       V4                       219 Sales document was not changed
thanks
vincent

Dear Vincent
May be this is related ABAP Issue please check with them because i found same issue
"BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.
"Specify either address number or address handle " BAPI_SALESORDER_CREATEFR

Getting an error while creating a ERP Quotation from CRM Sales Web-UI.

Hi Experts,
I am getting an error while creating a ERP quotation from CRM Sales Web-UI. Here I am enclosing the screen shot. Please give me the solution for this.Thank you in advance.
Regards
Kishor Kumar.

Hi Kishore,
Please refer to the link below -
Entry of ERP Sales Documents in SAP CRM - Sales Quotation and Order Management - SAP Library
Also, refer to the SAP note -
1446253 - FAQ note: ERP documents in the CRM Web UI (lead-to-cash scenario)
This note will give you the related topic and the configuration required through SAP help links.
Hope this will be useful.
Thanks and Regards
DJ

BAPI Error in creating quotation

Hi all,
In BAPI ' BAPI_QUOTATION_CREATEFROMDATA2', I given all manditory parameters ( QUOTATION_HEADER_IN -import parameter and QUOTATION_PARTNERS - tables ).
But If I execute, its returning below messages.
Please enter sold-to party or ship-to party
Sales document was not changed.
Can u please tell me where to specify the sold-to party and ship-to party in this BAPI.
Thanks
Murali.

Hi Murali,
I tried creating a quotation in my system using the same BAPI, and i was able to create one with the very basic info and without having to pass any ITEM details.
QUOTATION_HEADER_IN-DOC_TYPE
QUOTATION_HEADER_IN-SALES_ORG
QUOTATION_HEADER_IN-DISTR_CHAN
QUOTATION_HEADER_IN-DIVISION
QUOTATION_HEADER_INX-DOC_TYPE
QUOTATION_HEADER_INX-SALES_ORG
QUOTATION_HEADER_INX-DISTR_CHAN
QUOTATION_HEADER_INX-DIVISION
(* You dont need to set the update flag)
QUOTATION_PARTNERS-PARTN_ROLE
QUOTATION_PARTNERS-PARTN_NUMB
Try passing just the above fields in SE37, and let me know.
Regards,
Chen

Error while creating A/R Credit Memo

Hello everyone.
I'm creating some documents on my AddOn, keeping the relationship map.
My process is to create: Sales Quotation > Sales Order > A/R Down Payment Invoice.
The creating process is ok, but sometimes I need to cancel these documents. Sales Quotation and Sales Order have the Cancel function, and it's working fine, but the down payment does not have a Cancel function.
What i'm doing is trying to create a A/R Credit Memo, but i'm getting the following error:
[RIN1.CSTfIPI][line:1] "Linked value 50 does not exist"
In my code, i'm setting this fields:
Document.Lines.BaseType = 203
Document.Lines.BaseEntry = here I set the Down Payment Code
If I do it manually, using the function Copy To on Down Payment form, it works fine.. what can i do?
PS: SAP 9 PL 04
Thank you!

Usually BaseEntry and BaseType are only used when drawing documents.
If that is what you are doing could you please test the following:
Otherwise same code but:
foreach (var lItem in lItens)
                    lDocumento.Lines.BaseType = 203;
                    lDocumento.Lines.BaseEntry = "DownPaymentDocEntry";
                    lDocumento.Lines.VatGroup = "VatGroupCode";
                    lDocumento.Lines.Quantity = lItem.Quantidade;
                    lDocumento.Lines.UserFields.Fields.Item("U_CodOrcamentoVenda").Value = "Code";
                    lDocumento.Lines.Add();
Regards,
Johan

I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. So, what are the parameters that I need to set in CRM system so that my quotation gets replicated?

Dear Experts,
I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
Thanks,
SMTP

It may be best to recreate the folder and the smart playlists from scratch.
tt2

Error In Service order Quotation while Creation Follow-up

Hello All,
       In facing an error while creating a follow-up in service order Quotation in CRM WEBUI .
Business Server Page (BSP) error
Error as Follow
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
      Message E PRC_MESSAGES_EXT 320 cannot be processed in plugin mode HTTP
Exception Class     CX_SY_MESSAGE_IN_PLUGIN_MODE
Error Name
Program     CL_BSP_WD_VIEW_MANAGER========CP
Include     CL_BSP_WD_VIEW_MANAGER========CM002
ABAP Class     CL_BSP_WD_VIEW_MANAGER
Method     DO_REQUEST
Line     43
Long text     -
Error type: Exception
Your SAP Business Server Pages Team
Thanks in advace.
Regards,
Kiran Posanapalli.

Hello,
I don't have an answer for you but maybe this helps you in finding one
The message class PRC_MESSAGES_EXT is used for IPC error messages.
Maybe you have errors in some IPC java user-exits?
Hope this helps,
Kind regards,
Joost

How to create ECC Quotation from CRM Opportunity?

Hi Experts,
Here I am getting an error like "S::000" while creating ECC Quotation from CRM Opportunity. Here I am enclosing the screen shot, please give me the solution.
Regards
Kishor Kumar.

Hi Kishore,
Please check the below links, there are certain per-requisite steps which are needed for this to work.
https://help.sap.com/saphelp_crm60/helpdata/en/47/45839696581a41e10000000a1553f7/frameset.htm
https://help.sap.com/saphelp_crm60/helpdata/en/47/463fc2b61c1a41e10000000a1553f7/frameset.htm
You can also check the SAP Note : 1078575 - ERP sales transactions in SAP CRM for more details.
Hope this helps.
Regards,
Siraj

Error while creating a new connection in ODSM for OVD

Hi all,
I am getting the following error while creating a new connection in ODSM for OVD.
Error log:
[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by:
=======
java.lang.NoClassDefFoundError: Could not initialize class
com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at com.octetstring.vde.admin.services.client.ServerMgrServiceLocator.getVDEAdminService(ServerMgrServiceLocator.java:58)
at oracle.ldap.odsm.model.ovd.APServerProxy.connect(APServerProxy.java:248)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticateAs(APServerProxy.java:684)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticate(APServerProxy.java:286)
at oracle.ldap.odsm.model.ovd.APServerProxy.init(APServerProxy.java:216)
at oracle.ldap.odsm.model.ovd.APServerProxy.<init>(APServerProxy.java:198)
at oracle.ldap.odsm.model.ovd.OVDRoot.connectOVD(OVDRoot.java:185)
at oracle.ldap.odsm.ui.common.Connection.connect(Connection.java:120)
at oracle.ldap.odsm.ui.common.Visit.createConnection(Visit.java:663)
at oracle.ldap.odsm.ui.common.Login.saveChanges(Login.java:215)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
... 28 more
How to resolve this issue.Pls suggest me.
Regards,
-Deena.

Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio.

Error in creating a quotation DP80

Similar Messages

Maybe you are looking for