Error in Credit Memo Creation using BAPI
Hi,
While creating a Credit memo using the BAPI "BAPI_SALESDOCU_CREATEFROMDATA" , the following message is returned: "EVP 113Processing customer 9012041 terminated"
This occurs only for a particular customer, while for others the BAPI works fine.
I tried to create a Credit Memo using VA01 for the above customer. The Credit Memo got created there.
I am not able to find out a reason for the above. Can anyone help me with this.
Thanks in advance,
Amit
Hi,
Check the dump in SM14 and see where exactly it is throiwng error..Put a break-point before that and then debug the bapi and see if ur missing anything for this customer and what is the difference between this customer and other customer data.
Regards,
Nagaraj
Similar Messages
-
Problem while creating credit memo request using BAPI
HI,
I am trying to create credit memo request using the BAPI_SALESDOCU_CREATEFROMDATA1..
I am getting the error as " No customer master data is available for the customer". But the customer exists in the KNA1 table. What is the mistake i hv done.. this s my code..
REPORT ZSV_CREDITMEMO_TEST1.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
DATA: lt_schedules_ink TYPE STANDARD TABLE OF bapisdhead1
WITH HEADER LINE.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = 'G2'.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = '0001'.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = ''.
headerx-distr_chan = 'X'.
Division
header-division = ''.
headerx-division = 'X'.
headerx-updateflag = 'I'.
*Complete delivery
header-COMPL_DLV = ''.
header-COMPL_DLV = 'X'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = '0000C10130'.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = ''.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = 'C20011'.
itemx-material = 'X'.
Plant
item-plant = ''.
itemx-plant = 'X'.
Quantity
item-target_qty = '10000'.
itemx-target_qty = 'X'.
item category
itemx-ITEM_CATEG = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = '10000'.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
can anyone tell what the error is.?Hi
please look at code below code this succefully creating credit memo may some help to you
header-doc_type = 'ZS4'.
PERFORM get_plant.
headerx-doc_type = 'X'.
header-sales_org = wa_temp1-vkorg.
headerx-sales_org = 'X'.
header-purch_no = wa_temp1-bstnk.
header-distr_chan = wa_temp1-vtweg.
headerx-distr_chan = 'X'.
header-division = wa_temp1-spart.
header-purch_no_s = wa_temp1-bstnk.
headerx-division = 'X'.
wa_partner-partn_role = 'AG'.
wa_partner-partn_numb = wa_temp1-kunnr.
APPEND wa_partner TO it_partner.
wa_partner-partn_role = 'WE'.
wa_partner-partn_numb = wa_temp1-kunnr.
APPEND wa_partner TO it_partner.
CLEAR: wa_partner.
LOOP AT lt_temp2 INTO wa_temp2 WHERE kunnr = wa_temp1-kunnr.
"AND matnr = wa_temp1-matnr.
*wa_item-itm_number = wa_temp2-posnr .
wa_item-material = wa_temp2-matnr.
wa_item-plant = wa_temp2-werks.
wa_item-req_qty = wa_temp2-fkimg * 1000.
wa_item-target_qty = wa_temp2-fkimg * 1000.
APPEND wa_item TO it_item.
ENDLOOP.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
EXPORTING
order_header_in = header
* WITHOUT_COMMIT = ' '
* CONVERT_PARVW_AUART = ' '
IMPORTING
salesdocument = v_vbeln
* SOLD_TO_PARTY =
* SHIP_TO_PARTY =
* BILLING_PARTY =
return = return
TABLES
order_items_in = it_item
order_partners = it_partner.
IF v_vbeln <> space.
wa_vbeln-vbeln = v_vbeln.
APPEND wa_vbeln TO lt_vbeln.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
HIDE wa_vbeln-vbeln.
CLEAR: wa_partner,header,v_vbeln, wa_temp2.
REFRESH: it_partner,it_item.
ELSE.
* LOOP AT return .
it_error-srno = idx.
it_error-err_msg = return-message.
APPEND it_error.
* ENDLOOP.
ENDIF.
idx = idx + 1.
ENDLOOP.
Regards -
Error in standard network creation using BAPI
hi,
I need to create standard network using BAPI.
I am trying with BAPI_BUS2002_CREATE. As per the documentation, I need to call function BAPI_PS_INITIALIZATION. But, I am not able to get the required output since its giving me error.
Does anybody has used the same BAPI for standard network creation.
Regards,
UjjwalaHI,
How did u create standard network? If u used bapi, which bapi did u use??? -
Error in sales order creation using bapi
Hi,
Iam trying to create sales order by using BAPI_SALESORDER_CREATEFROMDAT1 and when iam trying to execute
the function module by passing all th eparameters and iam getting the error as
inspite of entering sold_to_party and ship_to_party details in table ORDER_PARTNERS
"enter the sold_to_party or ship to party details"
please help me out in this isue its an urgent.
Thanks.
sayed.Can you share the codes ?
Thanks.
Ashish -
Credit Memo Creation - Sold-to-party / Ship-to-party fields
I am trying to create a SD Credit memo document.
From the thread Credit Memo Creation I understand that the BAPI BAPI_SALESORDER_CREATEFROMDAT2 cant be used and instead I gotta use the FM SD_SALESDOCUMENT_CREATE for this purpose.
On this backdrop, I am trying to pass sold-to-party / ship-to-party values into this FM.
But, in the structure SALES_HEADER_IN type BAPISDHD1, I couldnt find the fields to pass these values.
Please advise the name of the fileds/structure where I should pass shiptoparty and soldtoparty values.
In VA01 screen, you could see these fields.
Thanks,
Message was edited by:
Jay
Message was edited by:
Jayjay,
check the below link for couple of sample codes...
Re: BAPI_SALESDOCU_CREATEFROMDATA, create credit memo request
May be helpful for you
~~Guduri -
Error in : Purchase order Creation using BAPI_PO_CREATE1
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
* Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
* Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
* Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
* Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
* Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
* Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa[].
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
poitem = i_bpoi[]
poitemx = i_bpoix[]
poschedule = i_bpos[]
poschedulex = i_bposx[].
i_order = i_new_ebeln .
SHIFT i_order LEFT DELETING LEADING '0' .
i_return-errortype = c_char_i .
i_return-workarea = c_zsw .
i_return-message = '064' .
i_return-variable1 = i_order .
loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
append i_bapiretn to t_bapi_return .
endloop .
if t_bapi_return[] is initial .
i_create_order = c_char_x .
CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
EXPORTING
act_return = i_return. "Popup with new PO no.
ENDCASE . " Docind
ENDIF .
ENDLOOP.Hi Shareen,
I think in the following parts of the code,
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa[].
Error in : Purchase order Creation using BAPI_PO_CREATE1
Posted: Mar 20, 2006 7:39 PM Reply E-mail this post
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = <b>i_ekpa[].</b>
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
<b> poitem = i_bpoi[]
poitemx = i_bpoix[]
poschedule = i_bpos[]
poschedulex = i_bposx[].</b>
it should be only i_bpoi, i_bpoix, i_bpos, i_bposx but not i_bpoi[], i_bpoix[], i_bpos[], i_bposx[].
CHange the code as follows:
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa.
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
poitem = i_bpoi
poitemx = i_bpoix
poschedule = i_bpos
poschedulex = i_bposx.
i_order = i_new_ebeln .
SHIFT i_order LEFT DELETING LEADING '0' .
i_return-errortype = c_char_i .
i_return-workarea = c_zsw .
i_return-message = '064' .
i_return-variable1 = i_order .
loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
append i_bapiretn to t_bapi_return .
endloop .
if t_bapi_return[] is initial .
i_create_order = c_char_x .
CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
EXPORTING
act_return = i_return. "Popup with new PO no.
ENDCASE . " Docind
ENDIF .
ENDLOOP. -
Need API for Credit Memo creation-R12
Hi All,
I am working on R12 Implementation process. I have a requirement for creating the "Credit Memo" using API.
Could you please any one provide the API for Credit Memo creation process.
Thanks,
LSPHi,
Please refer the following links:
http://www.betteroracle.com/2012/08/ar-api-create-credit-memo-r12.html
http://easyoracleapps.blogspot.com/2011/08/creating-credit-memos-and-appling-these.html
http://prasanthapps.blogspot.com/2011/05/credit-memo-creation-via-api.html
Googling will help you indeed
Rgds, -
Reena Prabhakar - Sales order creation Using BAPI
Hi Reena,
This is Dinesh,i also face problem in Sales order creation using BAPI if you can send me the code it would be great help to me.
Regards,
DineshAnyhow, here is the code that I am using currently which works perfectly well. Not sure if it will be of any help to you, since the values to the BAPI come from the Webdynpro application. I have values stored in my "Test data directory" which I use for testing from the backend.
FUNCTION ztest.
Call the BAPI to create Sales Order
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = l_order_header
IMPORTING
salesdocument = l_salesdocument
TABLES
return = it_return
order_items_in = it_order_items
order_partners = it_order_partners
order_schedules_in = it_order_schdl
order_conditions_in = it_order_conditions
order_text = it_order_text.
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc = 0.
*-- error occured
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ELSE.
*-- no error
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
ENDFUNCTION. -
Hi,
I am creating a credit memo with respect to credit memo request using transaction VF01. When I save the billing document, the billing document number is displayed. But when I try to see the same billing document, I get the error message - billing document does not exist or is archived.
I check the document flow, the status of credit memo request shows Open.
Don't understand why does the billing document disappear?
Any sugeestions where to check!!!!
Regards,
SandeepHi ,
Do you get any error / update termination message, Check in T.code SM13, you may find some termination message against your User id.
Outputs can also be the possible cause for such issues..
Regards
Shashikant -
Update Billing Document During Credit Memo Creation
Hi,
I need to update the billing document during credit memo creation in VA01. Is it possible to achieve this requirement since the billing document is in use during the runtime?
Thanks & Regards,
MawiHi Mawi,
When you are trying to change billing document use CALL FUNCTION 'DEQUEUE_ALL'. It will unlock that billing number and you can change that billing document.
Thanx & Regards
Rami Reddy -
Re: Credit memo creation - Update terminated
Hello
I have a issue related to Credit memo creation.
When i try to create a Credit memo with reference to Credit memo request, below error is appearing.
Express error - Update was terminated
Error info - TD465: device type ZHPLJCM1
Credit memo number is getting generated but when i go to view mode (VF03) there is no credit memo in the database.
Even in table VBRK, no data is available.
Could you please suggest how to resolve this issue.
thank you
AnirudhHello,
Goto Transaction code SM13 and clilck on the ALL option in Status and Execute.
Then it will lead to the next screen where you have option of MODULES, click on it and and it will give the Program and Technical data.
Clearly it will give the details where the problem lies, Work with your ABAPER and fix.
Regards,
santosh -
Vendor Credit Memo creation in SAP via IDOC Interface (Inbound)
Hello Team,
I have a client requirement to create Vendor Invoices & Credit memo via Idoc Interface. Iam using INVOIC02 idoc type for posting Invoices and could able to create the invoice successfully. For credit memo , I'm aware that we can use the same idoc type (INVOIC02) and need to pass CRME value for the segment field BSART.
What i need is a sample Inbound INVOIC02 idoc file for credit memo to identify the required fields for successful credit memo creation.
Regards,
VijayHello Team,
I have a client requirement to create Vendor Invoices & Credit memo via Idoc Interface. Iam using INVOIC02 idoc type for posting Invoices and could able to create the invoice successfully. For credit memo , I'm aware that we can use the same idoc type (INVOIC02) and need to pass CRME value for the segment field BSART.
What i need is a sample Inbound INVOIC02 idoc file for credit memo to identify the required fields for successful credit memo creation.
Regards,
Vijay -
Create credit memo request using inbound IDOC
Hi Experts,
I want to create credit memo request using inbound IDOC, currently I am using GSVERF03 basic type and process code GSVE, I am getting below error:
No records exist in T661W for vendor XXXXX, plant, unloading point
Anyone suggest me is this correct message type to create credit memo request or suggest me the correct one. because we are working with customer sales order and invoice not with vendor purchase order.
Thanks for your help.ah, apologies i read outbound! I think you are using the correct message type i.e. GSVERF.
Can you not simply create the missing entry in T661W? i.e. for the missing records? -
Need sales order creation using bapi in oops
need code for sales order creation using bapi in oops
hi rocky,
could you pls give a bit explanation on what you are expecting.
regards,
Pavan -
Mass sales order creation using BAPI
Dear All,
Can anyone help in mass sales order creation using Bapi BAPI_SALESORDER_CREATEFROMDAT2.
For example if i want to create 3 sales order with three item per order . i am populating
HEADER = 3 Records
Item = 9 records
schedule = 9 records
partner = 1 record.
Then after populating the records I am calling Bapi BAPI_SALESORDER_CREATEFROMDAT2
to create order. It should have created three order but unfortunately it creates
only one sales order. I debugged and found that records are correct both in header,
item, scheudle and partners.
Could you please guide me what I am missing for creation of mass orders.
I appreciate your time and many thanks in advance.
cheers
chandraHi Chandra,
Do like this.
Loop at Header table into wa_header.
*-- Move BAPI Header data
Loop at item table into wa_item where condition.
*-- in this move all Item and Schedule line item to the BAPI.
At end of item .
Use the below function modules.
BAPI_SALESORDER_CREATEFROMDAT2
BAPI_TRANSACTION_COMMIT.
Endloop.
Endloop.
Regards,
Balavardhan.K
Maybe you are looking for
-
Using Prototype.js in JDeveloper
Hi All, I'm attempting to learn more about AJAX and was going over the examples int he book AJAX in Oracle JDeveloper. In chapter 3 I ran into a snag. It looks like the prototype.js functions are not being reached from within my input.js file. The sa
-
Itunes ipod movie sync problem
I have a bunch of videos on my ipod but just recently all the movies sort themselves in music instead of movies(on my ipod). when i sync a new movie it sorts itself under movies. my question is: how do i get all my movies to show up under movies.; an
-
Errors in Adaptive Web Service model
Hi, We are trying to consume a Webservice created in XI 3 sp18 using Webdynpro adaptive webservice model in Netweaver Developer Studio SP15. The portal version is EP7 SP15 When we give a Model name and specified the destination as EPDes while creati
-
HT201320 Setup a 2nd e mail account
Trying to setup AOL e mail and settings opens then closes also can't open contacts
-
i have deleted the settings icon from my iphone 5. It is still there when I double click the home button. How can I get the icon back?