Error in execution of query's from Query Designer
Hi,
We have recently installed the BI 7 server, when i execute the query from query designer i got the following URL:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=TEST_REP&VARIABLE_SCREEN=X&DUMMY=2
due to that page is not displayed, i guess there is some sort of hostname setting need to be done.
Can anybody please guide me where all these settings are done, help required urgently ?
Thanks in advance
In fact the query's are not running because this entry needs to be maintained in the below path:
C:\WINDOWS\system32\drivers\etc\hosts
Maintain this as the last entry below the localhost
<bi server ip> <host name>.
This entry is to be maintained whenever we dont see the host name in the url.
Similar Messages
-
Getting error while trying to delete columns from form designer
I Am trying to make last name a mandatory field.
AD was not getting provisioned for users that i created.The system validation task was not getting completed.WHen i tried to save the process form it was showing that last name was a mandatory field.So i figured it out that my process form was not getting populated.
i was trying to delete last name from the form version.But it was throwing an error code= DOBJ.SDC_CANNOT_DELETE_SRE_ENTRIES_EXIST
So i am trying to create a new version of a form and delete some columns.But when im doing it it shows the following error :
ERROR,15 Dec 2008 18:03:20,073,[XELLERATE.SERVER],Class/Method: tcSDC/hasPrePopulatedEntries Error :Sdk cannot drop, SRE entries Exist.
Could you help as to how i can resolve this.You cannot delete a column, but you can hide it ;)
In your case, you may follow these steps:
1) Create a new form version.
2) Go to the "Properties" tab in the form editor.
3) Delete the "Required=true" property for the "Last Name" field.
4) Add a new property to the "Last Name" field: select "Visbile Field" in the "Property Name" combo-box, and add "false" to the "Property Value". Save.
5) Activate your version.
Think again about hidding the "Last Name", because I think it's a mandatory value for AD user creation (i.e., AD won't let you create users if they don't have Last Name set). However, I'm not sure.
Hope this help! -
Error in query execution from Query designer
Hi,
We have recently installed the BI 7 server, when i execute the query from query designer i got the following URL:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=TEST_REP&VARIABLE_SCREEN=X&DUMMY=2
due to that page is not displayed, i guess there is some sort of hostname setting need to be done.
Can anybody please guide me where all these settings are done, help required urgently ?
Thanks in advanceHello Dipika
May be you have not included host string in logon pad.
1. Open SAP log on pad
2. Select the system and go to change mode
3. you have IP defined for the system, here you need to put host string name which u can get from C:\WINDOWS\system32\drivers\etc file for your SAP system in your system.
4. Save and exit.and run query again
Thanks
Tripple k -
Trying to query data from a view - ORA-01882 and ORA-02063 Errors
Hey there,
I tried to query data from a view that was provided by a colleague. This view works fine and gives correct data using PL/SQL Developer or SQLPLUS, but in SQL Developer, I get the following error:
ORA-01882: Time zone region not found
ORA-02063: preceding line from SYSTOOLS
01882.00000 - "timezone region %s not found"
* Cause: Specified reason name was not found
* Action: Please contact Oracle Customer Support
Vendor Code 1882
Where comes this error message from?! SYSTOOLS is the database link.
Can't see an obvious reason for this error.
OS is Windows 2000 SP4, SQL Developer is v1.1.1.25 BUILD MAIN-25.14
Regards,
ThomasFrom Oracle Messages 'Cause and Action'
http://www.oracle.com/technology/products/designer/supporting_doc/des9i_90210/cmnhlp72/messages/ora_messages.htm
ORA-01882, 00000, "timezone region %s not found"
Cause: The specified region name was not found.
Action: Please contact Oracle Customer Support.
Maybe invalid region in NLS_LANG?
"select * from v$nls_parameters"
Starting this script in all developer program and compared result... -
0ADHOC error while executing the query from Report Designer
Hi All,
When I am executing The Query from Report Designer, am getting the below error.
Please help me in this regard.
The initial exception that caused the request to fail was:
The Web template "0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
Thanks,
KVRHi,
The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
Best regards,
Janine -
Error while executing report from Query designer
Hi All,
When I am executing from query designer, I am getting following error.
Even I can't execute it from another portal where i created source system of BI server.
But i can execute queriew from Query analyser and t-code RSRT.
When I execute from Query desinger the url is as follows.
http://XXX:00/irj/servlet/prt/portal/prtroot/pcd!3aportalcontent!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0PA_C01_Q0201&VARIABLE_SCREEN=X&DUMMY=5_
And the error is:
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,*
Required information for reproduction according to note 948490.*
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
java.lang.NullPointerException
java.lang.NullPointerException
at com.sap.ip.bi.webapplications.runtime.service.metadata.impl.MetadataAccess.getMetadataModel(MetadataAccess.java:139)
at com.sap.ip.bi.webapplications.runtime.impl.Page.getMetadataModel(Page.java:8953)
at com.sap.ip.bi.webapplications.runtime.impl.Page.normalizeCommands(Page.java:4963)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4473)
at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3316)
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000100 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP unknown
Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_24-b04
Operating System SunOS - amd64 - 5.10
REgards
MohanHi mohan ,
You can check these OSS notes for the issue .
1. 795699 - Customizing default error messages for HTTP
2. 807000 - Http requests are not fully read after timeout
3. 804124 - HTTP communication with XI Adapter Engine fails
Regards,
Lokesh -
Hi all,
On a SA 520 I got this error, every 10 seconds:
sqlite3QueryResGet failed.Query:SELECT * FROM networkInterface WHERE interfaceName=\'bdg1\
Internet access was very spoty and I couldn't reach the firewall administration on the LAN interface. Had to shutdown the appliance to get it working again.
Firmware version is 2.1.7.1
What could have happenend?
With kind regards,
JeroenHi, everything in the "Quick Reference" section should be commented out with ;
You should change those settings further down in the php.ini file.
Example:
error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
display_errors = Off
Last edited by adrianx (2013-07-26 12:32:02) -
ADM Error processing results from query: Error: Index 0 out of range
11.1.2.1
When running quite a large book, we are getting the following error:
ADM Error processing results from query: Error: Index 0 out of range
The individual reports in the books are running fine.
PS. The report books that are giving this error run fine on 9.3.1
Could this be a time-out issue and how do we resolve it?what is background datasource Essbase or HFM
do you have lot of data in pov please try below
>Do you have pov prompt
>increase jvm heap size for report server in reporting server
>Fr log files has some more detail -
I have the below network setup:-
1. Its a simple network at my father's office at a small town called Ichalkaranji (District - Kolhapur, Maharashtra).
2. We are using private network range 192.168.1.xxx with two Windows Server 2003 Enterprise Edition with SP2 licensed copies and 15 local Windows 7 clients who are only using Server A.
3. The network is having a TP-Link Braodband Router Connected to internet with the IP 192.168.1.1.
4. Both there Windows Server 2003 Enterprise Edition with SP2 are running separate SQL Server 2005 Express with Advanced Services, you can treat them as Server A (Problematic Server with IP of 192.168.1.2)
and Server B (this is not having any issue with IP of 192.168.1.3).
5. Server A is also being used by 6 Remote users from our Kolkata office using DDNS facility through the NO IP client software which installed separately on both the servers. Kolkata remote users
do not use OR access the Server B.
6. Server B is being used by only 2 Remote users from our Erode office (Under Salem District, Tamilnadu) using DDNS facility through the NO IP client software which installed separately on both
the servers. Erode remote users do not use OR access the Server A.
7. The front end application which running separately on both the servers have been developed in VB by a local vendor at Ichalkaranji (District - Kolhapur, Maharashtra).
8. Both Servers are having the same database structure in terms of design and tables format. Only difference is that both the servers are being used separately.
9. This error OR problem is only related to Server A, where on the clients we get the message "error [hyt00] [microsoft][odbc sql server driver] query timeout expired" every now and then.
10. We have to frequently reboot the server whenever we get this message on the client machines. May be after rebooting every thing works perfectly for 2 hours / 5 Hours / may be one full day but
the the error will come back for sure.
11. Current Database back up size on Server A is around 35 GB and take around 1 hour 15 minutes daily to take the back up.
12. Current Database back up size on Server B is around 3 GB and take around 5 to 10 minutes daily to take the back up.
13. One thing I have noticed is that when ever we reboot Server A, for some time sqlsrvr.exe file will show memory usage of 200 to 300 MBs but it will start using slowly, what i understand is that
this is the way SQL Server works.
14. Both the Servers are also running Quick heal Antivirus Server Edition separate licensed copies also.
15. Server B is also running Tally ERP 9 Licenses copy which is being used locally by 15 users of Ichalkaranji (District - Kolhapur, Maharashtra) same users
Can any one help to resolve this issue. Any help will be highly appreciated.The error message "query timeout expired" occurs, because by default many APIs, including ODBC only waits for 30 seconds for SQL Server to send any output. If no data has been seen for this period of time, they tell SQL Server to cancel execution
and return this error to the caller.
This timeout could be seen as a token that the query is taking too long time to execute and this needs to be fixed. But it can also be a pain in the rear parts, if you are content with a report taking five minutes, because you only run it once a day.
The simplest way to get rid of the error is to set the timeout to zero, which means "wait forever". This is something your vendor would have to do. This may, however, not resolve the problem, as the users may just find that the application is hanging.
To wit, there are two reasons why the query takes more than 30 seconds to complete. One is that there is simply that much work to do. This can be reduced by adding indexes or by doing other tuning, if the execution time is not acceptable. The other possibility
is blocking. That is, there is a process blocking this query from completing. This is much more likely to require attention.
It is not clear to me, whether the vendor has developed the database part as well. In this case, you should probably call the vendor's support desk to have them to sort this out.
Finally, I am little puzzled. You say that you are using Express Edition, but one of the databases is 35 GB in size. 35 GB is far above the limit for Express Edition.
Erland Sommarskog, SQL Server MVP, [email protected] -
Not able insert ,query data from forms
hi,
I am not able to insert data or query data from forms(10g devsuite).getting error frm-40505,frm 40508 .i am able to insert and select record from sql plus.the block ihave created is control block .it is connected to the table using the properties.
should i do anything to insert record.please helpthe block ihave created is control block .it is connected to the table using the properties.A Control Block, by definition, is a non-database block. This means the block is not directly connected to a table so you have to manually display data in the block and any DML you want to perform on data in this block you must do manually as well.
There are four database objects you can base your database block on; 1) a Table, 2) a View, 3) From Clause Query (basically an In-line View), and 4) a database stored procedure. I recommend you use one of these four methods rather than manually display your data.
Craig... -
Getting error "Column is not indexed " when executing query on ORACLE 10g
Hi all,
When executing the below query im getting the error "ORA-20000:Column is not indexed"
query:
select xmlelement("nexml:result",xmlattributes('http://namespaces.nextance.com/nex/xml' as "xmlns:nexml"),xmlelement("nexml:value",count(*))).getClobVal()
from "permission"
where ( ((contains(object_value,'(searchDocument) inpath(/permission/action)') > 0)) and ((existsNode(object_value,'/permission[resource/resourcekey/@type[. = "document"]]') = 1)) and ((contains(object_value,'(GeneralUser) inpath(/permission/principal/@name)') > 0)) and ((existsNode(object_value,'/permission[principal/@type[. = "group"]]') = 1)) and ((existsNode(object_value,'/permission[type[. = "allow"]]') = 1)) and ((contains(object_value,'(nexip) inpath(/permission/resource/resourcekey/field/@value)') > 0) or (contains(object_value,'(Corporate) inpath(/permission/resource/resourcekey/field/@value)') > 0) or (contains(object_value,'(ProcurementAgreement) inpath(/permission/resource/resourcekey/field/@value)') > 0) or (contains(object_value,'(Procurement) inpath(/permission/resource/resourcekey/field/@value)') > 0) or (contains(object_value,'(SalesAgreement) inpath(/permission/resource/resourcekey/field/@value)') > 0)) )
Then after checking some forum, i replaced "contains" with "ora:contains" and executed the query. Now im not getting the first error but got a new error "invalid relational operator"
So please help me in resolving the errors?
Thanks in advance.Anil kumar wrote:
Hi,
Thanks for your reply. Could you please explain your solution in detail?Hi,
I just have a try...
create table t (id int,my_lob clob)
begin
insert into t values(101,'Oracle redwood shores USA');
insert into t values (102,'HP palo alto USA');
insert into t values(103,'Capgemini FRANCE');;
end;
create index my_idx on t(my_lob) indextype is ctxsys.context
select *
from t
where contains(my_lob,'USA',1)>0
Output
ID MY_LOB
101 Oracle redwood shores USA
102 HP palo alto USA Hope it helps,
CKLP -
Error in while Executing Query in the Query Designer
Hi,
I created info Set based two info object and three Data Store Objects. and join condition is Left Outer Join.
there are Business Partner info object, CRM BP Sales View Info Object and Data Store Objects are BP: Roles (0BP_ROLE),Partner: Industries(0BP_IS),CRM Marketing Attributes for Business Partner(0ATR_DS01)
I given some Selection Parameters while executing query in the Query Designer. in That i given city is selection parameters
and i creted variable for this info object.
it gives the Error Messages
Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist möglich
Der Wert "New Delhi " von Merkmal 0CITY40 enthält an der 10.ten Stelle einen Fehler
it is very urgent , can any one help me regarding this.Hi Reddy,
The Error message in english is this
While reading the data mistakes have appeared. Navigation is possible
The value " New of Delhi " from sign 0CITY40 contains a mistake at the 10.ten place
and i think you need to run the change run and run the report with out selecting the variable option.and navigate in the report by filtering the report for your requirement.
Try this and let me know.
Thanks,
RK -
Portal runtime error while executing BI report through BEx Query designer
I want to execute a query from query designer but when I execute it the following error occurs -
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 04:30_30/04/11_0008_35740651
Refer to the log file for details about this exception.
I have checked log, the error displayig in log is,
ACCESS ERROR: Authorization check for caller assignment to J2EE security role SAP_J2EE_Engine:administrator
Kindly help me.
regards
nkDear Friends
I have the same with this problem
Please help us to resolve this problem
Thanks and best regards -
How to execute a BI query/view from a web dynpro application?
Hi all,
I am trying to connect to a BI system from a Web Dynpro application. I have to execute a view/query and process the output in my application. Please guide me about how to establish the connection to the BI system from my web dynpro application and then execute the query/view.
I have tried executing/modelling the BI query/view using Visual Composer but I get an error saying 'QueryView Instantiation failed' when I try to drag the view/query on to the design board.
Please guide me and help me achieve this.
Thanks & Regards,
KishanHi Kishan,
Define system for BI in portal and define JCo destination, then from WDJ application use can query BI.
Create the Technical System and connect with JCO Destinations
or
Connecting through the BI Connecters (ex: XMLA Connecter)
Refer below link:-
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1
In this document you will get details related to connector and other admin activity.
Hope this may help you.
Deepak!!! -
Problem with return a ColdFusion query object from a Java class
Hi!
I need to return a ColdFusion query object from a Java class
using a JDBC result set ( java.sql.ResultSet);
I have tried to pass my JDBC result set in to the constructor
of the coldfusion.sql.QueryTable class with this code:
ColdFusion code
<cfset pra = createObject("java","QueryUtil").init()>
<cfset newQuery = CreateObject("java",
"coldfusion.sql.QueryTable")>
<cfset newQuery.init( pra.getColdFusionQuery () ) >
My java class execute a query to db and return QueryTable
Java code (QueryUtil.java)
import coldfusion.sql.QueryTable; // (CFusion.jar for class
QueryTable)
import com.allaire.cfx //(cfx.jar for class Query used from
QueryTable)
public class QueryUtil
public static coldfusion.sql.QueryTable
getColdFusionQuery(java.sql.ResultSet rs)
return new coldfusion.sql.QueryTable(rs);
but when i run cfm page and coldfusion server tries to
execute : "<cfset pra =
createObject("java","QueryUtil").init()>" this error appears:
Object Instantiation Exception.
An exception occurred when instantiating a java object. The
cause of this exception was that: coldfusion/sql/QueryTable.
If i try to execute QueryUtil.java with Eclipse all it works.
Also I have tried to return java.sql.ResultSet directly to
coldfusion.sql.QueryTable.init () with failure.
Do you know some other solution?ok
i print all my code
pratica.java execute a query to db and return a querytable
java class
import java.util.*;
import java.sql.*;
import coldfusion.sql.*;
public class Pratica {
private HashMap my;
private String URI,LOGIN,PWD,DRIVER;
private Connection conn=null;
//funzione init
//riceve due strutture converite in hashmap
// globals
// dbprop
public Pratica(HashMap globals,HashMap dbprop) {
my = new HashMap();
my.put("GLOBALS",globals);
my.put("DBPROP",dbprop);
URI = "jdbc:sqlserver://it-bra-s0016;databaseName=nmobl";
LOGIN = "usr_dev";
PWD = "developer";
DRIVER = "com.microsoft.sqlserver.jdbc.SQLServerDriver";
try{
// Carico il driver JDBC per la connessione con il database
MySQL
Class.forName(DRIVER);
/* Connessione alla base di dati */
conn=DriverManager.getConnection(URI,LOGIN,PWD);
if(conn!=null) System.out.println("Connection Successful!");
} catch (ClassNotFoundException e) {
// Could not find the database driver
System.out.print("\ndriver non trovato "+e.getMessage());
System.out.flush();
catch (SQLException e) {
// Could not connect to the database
System.out.print("\nConnessione fallita "+e.getMessage());
System.out.flush();
//funzione search
//riceve un hash map con i filtri di ricerca
public QueryTable search(/*HashMap arg*/) {
ResultSet rs=null;
Statement stmt=null;
QueryTable ret=null;
String query="SELECT * FROM TAN100pratiche";
try{
stmt = conn.createStatement();// Creo lo Statement per
l'esecuzione della query
rs=stmt.executeQuery(query);
// while (rs.next()) {
// System.out.println(rs.getString("descrizione"));
catch (Exception e) {
e.printStackTrace();
try {
ret = Pratica.RsToQueryTable(rs);
} catch (SQLException e) {
e.printStackTrace();
this.close();
return(ret);
// ret=this.RsToQuery(rs);
// this.close(); //chiude le connessioni,recordset e
statament
//retstruct CF vede HashMap come struct
//METODO DI TEST
public HashMap retstruct(){
return(my);
//conversione resultset to querytable
private static QueryTable RsToQueryTable(ResultSet rs)
throws SQLException{
return new QueryTable(rs);
//chiura resultset statament e connessione
private void close(){
try{
conn.close();
conn=null;
catch (Exception e) {
e.printStackTrace();
coldfusion code
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<title>Test JDBC CFML Using CFScript</title>
</head>
<body>
<cftry>
<cfset glb_map =
createObject("java","java.util.HashMap")>
<cfset dbprop_map =
createObject("java","java.util.HashMap")>
<cfset glb_map.init(glb)> <!---are passed from
another page--->
<cfset dbprop_map.init(glb["DBPROP"])>
<cfset pra =
createObject("java","Pratica").init(glb_map,dbprop_map)>
<cfset ourQuery
=createObject("java","coldfusion.sql.QueryTable").init(pra.search())>
<cfcatch>
<h2>Error - info below</h2>
<cfdump var="#cfcatch#"><cfabort>
</cfcatch>
</cftry>
<h2>Success - statement dumped below</h2>
<cfdump var="#ourQuery#">
</body>
</html>
error at line <cfset pra =
createObject("java","Pratica").init(glb_map,dbprop_map)>
An exception occurred when instantiating a java object. The
cause of this exception was that: coldfusion/sql/QueryTable.
-----------------------------------------------------------------------
Maybe you are looking for
-
CS4: Unable to Open a Premiere 6 Project File
Hi! I'm trying to open an Adobe Premiere 6 (Windows) file in Adobe Premiere Pro CS4 (Windows 64-bit),and I'm getting the following error: The project appears to be damaged, it cannot be opened. As a possible workaround, I tried to import the Premiere
-
Consolidation on Year and Quarter
Hi Folks, I have a requirement of calculating total on year drilldown as an average of all months. Presently I have a KF, which is coming month wise, if we drill down month wise data is coming correct month wise. Now user wants to drill down year wis
-
I have been struggling to convert a friend's European DVD to NTSC. I've done this before using MPEG Streamclip, but never with such large files. What I see inside the TS folder is 34 _VOB files. The feature movie is on 6 files, named 01_1 through 01_
-
Map not speaking or moving in Air2.
I See that others are having problems with the map app, and that the solution was in settings. I've looked there. How can I get maps (the pre-loaded one OR Google's) to speak the directions and to move the map automatically. She will say the very 1st
-
How to get buried wires connected
First dial these numbers provided by your contractor who buried the wires: {edited for privacy}. None of those will get you anywhere, so then just call the number on your latest invoice: 1 800 Verizon, and then you have to ask for the repair bureau.