Error in execution of Scenario
Hi,
I am calling a scenario using ODIStartScenario in a package where in I am passing additional variables to the scenario. But on execution it throws error:
java.lang.Exception: Specified variable not found in the Repository : ERROR_HANDLER.PVV_ERR_SOURCE
at com.sunopsis.dwg.dbobj.SnpSession.a(SnpSession.java)
at com.sunopsis.dwg.dbobj.SnpSession.y(SnpSession.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSessionPreTrt(SnpSession.java)
I am able to see the variables in the package and also I can see them in SNP_VAR table.
Any pointers will be helpful!
Thanks!
how are you trying to pass the variable is it manuall input or select them using Additional variable. If so please select the variable using additional variable and let ODI create the complete ODIStartscen syntax. also here variable you are calling other variable . Are you refreshing them in the package before calling the startscen.
OdiStartScen "-SCEN_NAME=SCN_PKG_ERROR_HANDLER" "-SCEN_VERSION=001" "-ERROR_HANDLER.PVN_REC_DELIVERED=#PVN_RECS_DELVRD_CUSTCAT" "-ERROR_HANDLER.PVN_REC_LOADED=#PVN_REC_LOADED_CUSCAT" "-ERROR_HANDLER.PVV_INTERFACE_ALIAS=#PVV_INTERFACE_ALIAS" "-ERROR_HANDLER.PVV_SESSION_ID=#PVN_SESSION_ID"
Also the initial error message java.lang.Exception: Specified variable not found in the Repository : ERROR_HANDLER.PVV_ERR_SOURCE
i dont see that variable itself being called in the above startscen.
Similar Messages
-
ATTRIBUTE_IDOC_RUNTIME error in File-IDOC Scenario
Hi,
I got this error in FIle-IDOC scenario.
ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPMMX, client , RFC destination contain errors
There are many threads on same issue. Almost in all threads, the suggestion given was, we need to check the Channel Definition(Port should be SAP<SYSID> and not SAP<SYSID>_<CLIENT>)
I have given the proper values for RFC desitnation and port. Even then, I m getting this error.
Is there any other suggestions?Hi aarthi,
I suggest u chk all d settings dat u hav done..
Steps for ALE settings:-
Steps for XI
Step 1)
Goto SM59.
Create new RFC destination of type 3(Abap connection).
Give a suitable name and description.
Give the Ip address of the R3 system.
Give the system number.
Give the gateway host name and gateway service (3300 + system number).
Go to the logon security tab.
Give the lang, client, username and password.
Test connection and remote logon.
Step 2)
Goto IDX1.
Create a new port.
Give the port name.
Give the client number for the R3 system.
Select the created Rfc Destination.
Step 3)
Goto IDX2
Create a new Meta data.
Give the Idoc type.
Select the created port.
Steps for R3.
Step 1)
Goto SM59.
Create new RFC destination of type 3(Abap connection).
Give a suitable name and description.
Give the Ip address of the XI system.
Give the system number.
Give the gateway host name and gateway service (3300 + system number).
Go to the logon security tab.
Give the lang, client, username and password.
Test connection and remote logon.
Step 2)
Goto WE21.
Create a port under transactional RFC.(R3->XI)
Designate the RFC destination created in prev step.
Step 3)
Goto SALE.
Basic settings->Logical Systems->Define logical system.
Create two logical systems(one for XI and the other for R3)
Basic settings->Logical Systems->Assign logical system.
Assign the R3 logical system to respective client.
Step 4)
Goto WE20.
Partner type LS.
Create two partner profile(one for XI the other for R3).
Give the outbound or inbound message type based on the direction.
Step 5)
Not mandatory.
Goto BD64.
Click on Create model view.
Add message type.
Step 6)
Goto WE19
Give the basic type and execute.
fill in the required fields.
Goto IDOC->edit control records.
Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
Click outbound processing.
Step 7)
Go to SM58
if there are any messages then there is some error in execution.
Goto WE02.
Check the status of the IDOC.
Goto WE47.
TO decode the status code.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
reward points if helpful...
MenoN -
Error while invoking a scenario from another scenario through ODIStartScen
hi,
my requirement is to call a scenario from another scenario. the main scenario contains an interface to get data from jms que and put that in DB and then invoke the inner scenario through ODIStartScen and am executing the scenario through an agent which is on another machine. when am trying to execute the main scenario then i get following error while invoking inner scenario in ODIStartScen step ....
ERROR:::::
oracle.odi.runtime.agent.invocation.InvocationException: HTTP/1.1 500 Internal Server Error
at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:271)
at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartScenario(InternalRemoteRuntimeAgentInvoker.java:149)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java:266)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java:155)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:3185)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:1414)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2785)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1818)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:559)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:481)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$StartScenTask.doExecute(StartScenRequestProcessor.java:1040)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
the error that is in ODI server log is:
Root cause of ServletException.
org.springframework.jdbc.CannotGetJdbcConnectionException: Create DwgConnectConnection to master repository failed; nested exception is java.sql.SQLException: Pool connect failed : java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:93)
at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:49)
at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:58)
at oracle.odi.core.security.SecurityManager.doODIInternalAuthentication(SecurityManager.java:348)
at oracle.odi.core.security.SecurityManager.createAuthentication(SecurityManager.java:331)
at oracle.odi.runtime.agent.servlet.AgentServlet.processRequest(AgentServlet.java:494)
at oracle.odi.runtime.agent.servlet.AgentServlet.doPost(AgentServlet.java:454)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.sql.SQLException: Pool connect failed : java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113)
at com.sunopsis.sql.SnpsConnection.createConnection(SnpsConnection.java:380)
at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java:338)
at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:88)
at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:49)
at oracle.odi.core.persistence.dwgobject.DwgRepositoryConnectConnectionUtils.doGetMasterDwgConnectConnection(DwgRepositoryConnectConnectionUtils.java:58)
at oracle.odi.core.security.SecurityManager.doODIInternalAuthentication(SecurityManager.java:348)
at oracle.odi.core.security.SecurityManager.createAuthentication(SecurityManager.java:331)
at oracle.odi.runtime.agent.servlet.AgentServlet.processRequest(AgentServlet.java:494)
at oracle.odi.runtime.agent.servlet.AgentServlet.doPost(AgentServlet.java:454)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.sql.SQLException: Pool connect failed : java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:258)
at weblogic.jdbc.pool.Driver.connect(Driver.java:160)
at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:652)
at weblogic.jdbc.jts.Driver.connect(Driver.java:127)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355)
at org.springframework.jdbc.datasource.UserCredentialsDataSourceAdapter.doGetConnection(UserCredentialsDataSourceAdapter.java:162)
at org.springframework.jdbc.datasource.UserCredentialsDataSourceAdapter.getConnection(UserCredentialsDataSourceAdapter.java:133)
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
Caused By: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:835)
at weblogic.security.service.IdentityUtility.authenticatedSubjectToIdentity(IdentityUtility.java:30)
at weblogic.security.service.RoleManager.getRoles(RoleManager.java:183)
at weblogic.security.service.AuthorizationManager.isAccessAllowed(AuthorizationManager.java:375)
at weblogic.jdbc.common.internal.JDBCUtil.checkPermission(JDBCUtil.java:231)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:357)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:317)
at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:93)
at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:106)
at weblogic.jdbc.pool.Driver.connect(Driver.java:149)
at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:652)
at weblogic.jdbc.jts.Driver.connect(Driver.java:127)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355)
at org.springframework.jdbc.datasource.UserCredentialsDataSourceAdapter.doGetConnection(UserCredentialsDataSourceAdapter.java:162)
at org.springframework.jdbc.datasource.UserCredentialsDataSourceAdapter.getConnection(UserCredentialsDataSourceAdapter.java:133)
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
kindly help me out.
thanks in advance.In the batch File write this way
cd E:\OraHome_ODI\oracledi\bin
E:
startscen EXT_DATA 002 GLOBAL In case you are providing the values (EXT_DATA 002 GLOBAL) as parameter
then call the startscen this way
cd E:\OraHome_ODI\oracledi\bin
E:
startscen %1 %2 %3 -
ODI 20088:Error While Generating The Scenario
Hi,
Today I have change the name my logical file schema(name is change to lower to upper case).Then select the new schema from File Model (only it is using the File Schema).Then Try to generate the scenario again but getting an error like this:
ODI 20088:Error While Generating The Scenario
java.lang.NullPointerException
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatPopSourceSet(SnpGeneratorSQLCIT.java:7990)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatJobPopCollectionBuild(SnpGeneratorSQLCIT.java:7726)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.preComputePop(SnpGeneratorSQLCIT.java:7668)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatJobPop(SnpGeneratorSQLCIT.java:7568)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatPackageStep(SnpGeneratorSQLCIT.java:10477)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageScenario(SnpGeneratorSQLCIT.java:2883)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageScenario(SnpGeneratorSQLCIT.java:2817)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenScenSourceScenario(SnpGeneratorSQLCIT.java:11481)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenScenSourceScenario(SnpGeneratorSQLCIT.java:11505)
at com.sunopsis.graphical.dialog.SnpsDialogScen.generateScen(SnpsDialogScen.java:190)
at com.sunopsis.graphical.scenario.DwgScenGeneratingWizard.generate(DwgScenGeneratingWizard.java:68)
at oracle.odi.ui.action.SnpsPopupActionGenerateScenHandler.actionPerformed(SnpsPopupActionGenerateScenHandler.java:103)
at oracle.odi.ui.SnpsActionControler.handleEvent(SnpsActionControler.java:86)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:529)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:897)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:501)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
at java.awt.Component.processMouseEvent(Component.java:6297)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3275)
at java.awt.Component.processEvent(Component.java:6062)
at java.awt.Container.processEvent(Container.java:2039)
at java.awt.Component.dispatchEventImpl(Component.java:4660)
at java.awt.Container.dispatchEventImpl(Container.java:2097)
at java.awt.Component.dispatchEvent(Component.java:4488)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4236)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4166)
at java.awt.Container.dispatchEventImpl(Container.java:2083)
at java.awt.Window.dispatchEventImpl(Window.java:2489)
at java.awt.Component.dispatchEvent(Component.java:4488)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:668)
at java.awt.EventQueue.access$400(EventQueue.java:81)
at java.awt.EventQueue$2.run(EventQueue.java:627)
at java.awt.EventQueue$2.run(EventQueue.java:625)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$3.run(EventQueue.java:641)
at java.awt.EventQueue$3.run(EventQueue.java:639)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:638)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Please Help
Thanks
AnindyaIf you have not deleted the old file schema, then it should have been work but it seems to be theissues with the link between interface and model .
I cannot say this is the actual reason but it might be. Since you have draged the file datastore to interface, interface is probably pointing to old schema and file model is pointing new schema.
I guess you have to recreate the interface again. Let me know how it is going with you
Bhabani
http://dwteam.in -
ORA-04088: error during execution of trigger
Error Description :
We have more than 100 of records in a csv file which we are processing through a script. At the first execution let
say it generates trigger exception for five records ... when I execute the script second time those five records
are not throwing any exception but may be some other records. But consecutive trigger exception is not happening for any record . If a particular record is throwing exception at first attempt then in the second attempts it's not throwing the trigger exception.
Input file
PROPRTY_ID,NAME,OLD STREET,CITY,STATE,ZIP,NEW STREET,NEW CITY,NEW STATE,NEW ZIP
88527091,SAM PAUL SUMMU ,1061 XYZ,CITY1,ST,95626,5512 XX YY ZZ,TOWN,PA,12345-9812
Error :
88527091,SAM PAUL SUMMU ,1061 XYZ,CITY1,ST,95626,5512 XX YY ZZ,TOWN,PA,12345-9812 - PROPERTY Update Error : ORA-00001: unique constraint (PROD.PK_AUDIT_LOG) violated
ORA-06512: at "PROD.PROPERTY_AUD", line 159
ORA-04088: error during execution of trigger 'PROD.PROPERTY_AUD'
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> desc property
Name Null? Type
PROPERTY_ID NOT NULL NUMBER(20)
TYPE_CODE VARCHAR2(10)
TYPE_PREFIX VARCHAR2(10)
DWELLING_TYPE_CODE NOT NULL VARCHAR2(10)
DWELLING_TYPE_PREFIX NOT NULL VARCHAR2(10)
STREET_NUMBER VARCHAR2(25)
STREET_DIRECTION CHAR(2)
STREET_NAME NOT NULL VARCHAR2(45)
UNIT_NUMBER VARCHAR2(15)
CITY_CODE VARCHAR2(10)
STATE NOT NULL CHAR(2)
ZIP_CODE VARCHAR2(10)
UNIT_TYPE VARCHAR2(10)
UNIT_PREFIX VARCHAR2(10)
COUNTY_CODE VARCHAR2(10)
COUNTRY_CODE NOT NULL VARCHAR2(10)
SQUARE_FEET NUMBER(6)
NUMBER_MOTHER_LAW_UNITS NUMBER(6)
YEAR_BUILT DATE
PROPERTY_VALUE NUMBER(12)
ZIP_PLUS_4 VARCHAR2(4)
SFI_REQ_FLAG CHAR(1)
LAST_MODIFIED NOT NULL DATE
LAST_MODIFIED_BY VARCHAR2(31)
STANDARDIZED_STATUS VARCHAR2(10)
STANDARDIZED_DESC VARCHAR2(200)
SQL> desc audit_log
Name Null? Type
SEQ_NO NOT NULL NUMBER(20)
TABLE_NAME VARCHAR2(31)
USER_STAMP VARCHAR2(31)
TIME_STAMP DATE
TRAN_CODE CHAR(2)
RECORD1 VARCHAR2(2000)
RECORD2 VARCHAR2(2000)
FLAG_FLD CHAR(1)
SFI_FLAG_FLD CHAR(1)
ERROR_NUMBER NUMBER
Update Query which is getting executed :
UPDATE PROPERTY
SET DWELLING_TYPE_CODE = 'SFR',
DWELLING_TYPE_PREFIX = 'DWELLING',
STREET_NUMBER = NULL,
STREET_DIRECTION = NULL,
STREET_NAME = ln_new_street_name, -- <From input file>
UNIT_NUMBER = NULL,
CITY_CODE = ln_city_code, -- <From other Table>
STATE = ln_new_state, -- <From input file>
ZIP_CODE = ln_new_zip_code,
UNIT_TYPE = NULL,
UNIT_PREFIX = NULL,
COUNTY_CODE = ln_county_code, -- <From Other table>
COUNTRY_CODE = 1,
ZIP_PLUS_4 = ln_zip_plus_4 -- <From Input file>
WHERE PROPERTY_ID = ln_property_id; -- <From Other table>
*NOTE :* Property.LAST_MODIFIED field is auto populate through other trigger. It does not causing any problem.
This might be helpful :
SQL> select OWNER, CONSTRAINT_NAME, TABLE_NAME,COLUMN_NAME from dba_cons_columns where CONSTRAINT_NAME='PK_AUDIT_LOG';
OWNER CONSTRAINT_NAME TABLE_NAME COLUMN_NAME
PROD PK_AUDIT_LOG AUDIT_LOG SEQ_NO
PROD_ARCH PK_AUDIT_LOG AUDIT_LOG SEQ_NO
SQL> select SEQ_NO, trim(RECORD1), trim(RECORD2),TIME_STAMP
from audit_log where RECORD1 like '%BUTTE%' order by TIME_STAMP;
SEQ_NO
1675677212
TRIM(RECORD1)
00000000000031814095...SFR .DWELLING ...5512 BUTTE VIEW CT ..15532
.CA.95765 ...1377 .1 .....5000..20100922.SUSMSAHA ..
TRIM(RECORD2)
00000000000031814095...SFR .DWELLING ...5512 BUTTE VIEW CT ..15532
.CA.95765 ...1377 .1 .....5000..20100922.SUSMSAHA ..
TIME_STAMP
22-sep-2010
Trigger Body which is fired and throwing the exception :
create or replace trigger PROPERTY_AUD
before insert or update on PROPERTY
for each row
declare
rec1 varchar2(2000);
rec2 varchar2(2000);
tcode char(1);
ln_seq_id NUMBER:=Null;
ls_sql VARCHAR2(2000):=Null;
begin
select temp_audit_seq.nextval into ln_seq_id from dual;
rec1 := null;
rec2 := null;
if user = 'NONREP_USER' then
return;
end if;
if (dbms_reputil.from_remote = FALSE) then
:NEW.last_modified := sysdate;
if (user = 'SALESFORCE_SYNC') then
:new.last_modified_by := NVL(:new.last_modified_by,USER);
else
:new.last_modified_by := user;
end if;
end if;
if inserting then
rec1 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'I';
elsif deleting then
rec1 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'D';
else
rec1 :=
LPAD(:old.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:old.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:old.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:old.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:old.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:old.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:old.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:old.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:old.STATE, 2, ' ' ) || '.' ||
RPAD(:old.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:old.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:old.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:old.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:old.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:old.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:old.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:old.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:old.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:old.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:old.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:old.STANDARDIZED_DESC, 200, ' ' );
rec2 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'U';
end if;
ls_sql :='
INSERT INTO AUDIT_LOG
( seq_no,
table_name,
user_stamp,
time_stamp,
tran_code,
record1,
record2)
VALUES
( :id,
:s_table_name,
:s_user_name,
:d_sysdate,
:s_tcode,
:s_rec1,
:s_rec2
EXECUTE IMMEDIATE ls_sql
USING ln_seq_id,
'PROPERTY',
user,
sysdate,
tcode,
rec1,
rec2;
end;
Your suggestion is highly appreciated ..
Edited by: Bipul on Sep 23, 2010 12:40 AMTEMP_AUDIT_SEQ generates number with the increment of +1
Although there seems other sequence populating the AUDIT_LOG table through a different sequence with the increment of +10. So till now there are already 1179 different numbers residing in audit_log.seq_no and yet to be generated by the TEMP_AUDIT_SEQ sequence. I will look into more details.
SQL> select max(seq_no) from audit_log;
MAX(SEQ_NO)
1675689121
SQL> select TEMP_AUDIT_SEQ.nextval from dual;
NEXTVAL
1675677285
SQL> select count(*) From audit_log where seq_no>1675677285;
COUNT(*)
1179
SQL> select count(*) from audit_log where seq_no>1675677283 and mod(seq_no,2)=1;
COUNT(*)
1179
SQL> select seq_no from audit_log where seq_no>1675677283 and mod(seq_no,2)=1 and rownum<12;
SEQ_NO
1675677291
1675677301
1675677311
1675677321
1675677331
1675677341
1675677351
1675677361
1675677371
1675677381
1675677391
11 rows selected.
Thank you Lee and Herald ten Dam ... -
Error in file-file scenario: HTTP response contains status code 503
Hi folks,
I've encountered the foll error in file-file scenario:
Testing file-file scenario (followed the blog: https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&)
Initially i was hving problems with recvr comm channel, which are now resolved. File is sent successfully but not recvd. I tried to modify the scenario above and change the file type to 'Text' but still got the same error.
I've checked SICF -->default_host/xi/engine , we dont maintain logon data there. when i test the default_host/xi/engine service, it resolves into an ip addr as follows:
http://<hostname>.<domain.com>:8001/sap/xi/engine?sap-client=<clientNo>
(Also, we hv a BW system running on the same server ,which uses a fully qualified domain, while we dont which is why we get the above domain. Im not sure if there are any issues with that.)
and we get the foll error:
Error Code 10060: Connection timeout
If i remove the domain manually, im prompted for userid/pwd and get the foll result:
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Pipeline specified in URL attribute (type) not existing</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">URL_PIPELINE_NOT_FOUND</SAP:Code>
<SAP:P1>/sap/xi/engine?sap-client=<clientNo></SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Pipeline ID , which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=811)</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
also, we dont hv any overload issues as this is dev env and not many of us are using the xi server. Would really appreciate if any of you can share your inputs on how to resolve this. Thanks!!
cheers
PrachiHi ,
Look in to this for all errors
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655
<b>Award Points if found usefull.</b> -
Hi,
I developed a plugin which captures Before/After open, close and save events and perform some operation inside these events.
I tested the plugin in Windows XP and Acrobat 9.0.0 and 10.0.0 and everything works fine. But when in test my plugin on Windows Server 2008 Standard 32 bits, then windows detect an error while closing the acrobat and shows the following message:
"Data Execution Prevention has closed Adobe Acrobat"
I am using Acrobat 10.0.0 for testing in Windows Server 2008 operating system. Also, debugging the program shows no error but plugin does not produce the desired result when tested on Windows Server 2008 Standard 32 bits operating system.
Can anyone please giude me how to resolve this issue??
Thanks in advance!Are you really using 10.0.0? You've installed no updates to it??
From: poortip87 <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 6 Feb 2012 21:46:02 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: On closing Acrobat Windows detect an error "Data Execution Prevention has closed Adobe Acrobat".
On closing Acrobat Windows detect an error "Data Execution Prevention has closed Adobe Acrobat".
created by poortip87<http://forums.adobe.com/people/poortip87> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4190399#4190399 -
Dear all
How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
Thanks
Regards
karanHello
These are the following errors
1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
3.
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
tThere are repeating errors also.
TThanks
Regards
kkaran -
Hi Experts,
We got a problem here.
We have a query ran without any problems in RSRT. But when I try to put it as data sources(infoprovider) in APD.
I got following error:
column store error: fail to create scenario: [340 2048
We are in BW731006 & ABAP731006.
Any advise?
Thanks in advance!
TengranHi,
Can you check this part in error mentioned by clicking as highlighted in red box. It will give you a correct idea about the issue ::
Also share the detailed error with us as well.
Best Regards,
Arpit -
Hi Experts,
When executing a FM based extractor i got error 'Error in execution'. The log says 'Update mode not supported by API'.
I checked in debugging mode the update mode not getting reflected from standard program whtever mode in RSA3.
Please suggest any pointers or oss notes on this.
Thanks
Konda Reddyhi konda.
plzz go through these threads.
Update mode F not supported by the extraction api
update mode R is not supported by extraction API
https://forums.sdn.sap.com/click.jspa?searchID=22615890&messageID=6822401
Update mode R is not supported by the extraction API
hope this will help u -
While the session got started in ODI,but still showing me errors in Execution
Hi Folks,
Session got started in ODI but it is still showing me errors in execution:-
Errors are coming marked in red
Errors are like:-
1)
ODI-1217:Session INT_INFext_RT_RF(17001) fails with return code 30088.
ODI-1226: STEP INT_INFext_RT_RF fails while performing a Loading operation.This Flow loads Target Table TRG_SALES_PERSON.
ODI-1228:Task SRCSET0 (Loading) fails on the target ORACLE connection ODI_STAGE.
Caused by :Java .sql.SQLException :ORA-30088 :datetime/interval precision is out of range
at oracle.jdbc.driver.T4CTTIoer.processerror(T4CTTIoer.java:462)
Hope this finds the solution ASAP.Please post your Data Integrator questions on the Data Integrator forum (this is Data Service Integrator) Thanks.
Data Integrator -
WS20000050 - Custom rule in step 372 - Error during execution
I have attached a custom rule in Step 372 of workflow WS20000050
WS20000050 works fine with standard rule (168)
Custom rule is tested and simulated and it returns the Person 'P' and User 'US'
WS20000050 genarates fine with no errors (4 information only)
Errors after execution in SWIA is
Error when processing node '0000000372' (ParForEach index 000000)
Error when creating a component of type 'Step'
Error when creating a work item
Agent determination for step '0000000372' failed
Error in resolution of rule 'AC92000002' for step '0000000372'
Element OBJID is not available in the container
next node in error
Work item 000000426198: Object FLOWITEM method EXECUTE cannot be executed
Error when processing node '0000000372' (ParForEach index 000000)
I tried to delete OBJID from the binding for the rule but the same error repeats
Any help is appreciatedElement OBJID is not available in the container
Make proper binding from workflow to rule, the value OBJID is not reaching the rule conatiner.
Error in resolution of rule 'AC92000002' for step '0000000372'
Rule is not returning any agent chek that? -
Error cloning: Execution of command A:FASTPREP.EXE code 8557
Any ideas why happen this cloning a vm and trying to get in to domain?
FINEST: thr#76 Exception creating clone: Execution of command A:\FASTPREP.EXE exited with result code '8557' on desktop windows7-01
Jan 17, 2012 4:25:45 PM com.sun.vda.service.core.jobs.CloneJob runJob
WARNING: thr#76 Error cloning: Execution of command A:\FASTPREP.EXE exited with result code '8557' on desktop windows7-01
Jan 17, 2012 4:25:45 PM com.sun.vda.service.core.jobs.CloneJob runJob
FINER: thr#76 THROW
com.sun.vda.service.api.ServiceException: Execution of command A:\FASTPREP.EXE exited with result code '8557' on desktop windows7-01
at com.sun.vda.service.vbox.VBDesktop.executeProcess(VBDesktop.java:2187)
at com.sun.vda.service.vbox.VBDesktop.joinDomain(VBDesktop.java:2142)
at com.sun.vda.service.vbox.VBDesktop.executeFastPrep(VBDesktop.java:2046)
at com.sun.vda.service.vbox.VBHost.customizeDesktop(VBHost.java:934)
at com.sun.vda.service.vbox.VBDesktopProvider.cloneDesktop(VBDesktopProvider.java:345)
at com.sun.vda.service.vbox.VBDesktopProvider.cloneDesktop(VBDesktopProvider.java:242)
at com.sun.vda.service.vbox.VBDesktopProvider.cloneDesktop(VBDesktopProvider.java:237)
at com.sun.vda.service.core.jobs.CloneJob.createClone(CloneJob.java:85)
at com.sun.vda.service.core.jobs.CloneJob.runJob(CloneJob.java:56)
at com.sun.vda.service.core.jobs.Job.run(Job.java:143)
at java.util.concurrent.Executors$RunnableAdapter.call(Unknown Source)
at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
at java.util.concurrent.FutureTask.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)OK
"Your computer could not be joined to the domain. You have exceeded the
maximum number of computer accounts you are allowed to create in this
domain. Contact your system administrator to have this limit reset or
increased."
Change the user to clone or modyfy existing... -
During file extraction, "Error during execution, error code =4"
from Oracle® Fusion Middleware Getting Started With Installation for Oracle WebLogic Server
11g Release 1 (10.3.1)
http://download.oracle.com/docs/cd/E12839_01/web.1111/e13751/toc.htm#CIHCJJIA
> said "instead of installing the JRockit JDK that is included, Oracle strongly recommends that you download and install the latest available JRockit version separately."
selected "Oracle JRockit Mission Control 4.0, for Java version 6"
> got file named: http://download.oracle.com/otn/bea/jrockit/jrmc-4.0.0-1.6.0-linux-ia32.bin
Set permissions to *.bin installer:
chmod a+x file_name.bin ./file_name.bin
During file extraction (as 'oracle' user/owner) got: "Error during execution, error code =4"
Please advise.
thank you.hi,
i ran into teh same problem and just figured out that my CPU is too old (AMD Athlon 3000+). This processor doesnt support SSE2, as required, see
http://download.oracle.com/docs/cd/E15289_01/doc.40/e15066/suppconfigchanges.htm#CHDDFHJF
does your machine have all the relevant features? -
ORA-06502:numeric or value errORA-04088: error during execution of trigger
I received the following error message while entering a number within the maximum value (i.e. 9,999,999.) allowed in a data entry form which is separate from the base form:
ORA-06502: PL/SQL: numeric or value error:number precision too large ORA-06512:at "<Owner>.<Trigger>", line 194 ORA-04088: error during execution of trigger "<Owner>.<Trigger>"
Where <Owner> is the schema name and <Trigger> is the trigger name. The data block of the entry form is based on a database table, and the sum of all values entered (w/ a maximum value of 99,999,999.) is displayed in the base form. A grand total of this sum along w/ other totals on the base form is also displayed w/ a maximum value defined as 999,999,999. I only receive the above error message when the grand total is greater than 99,999,999. If the grand total is less than or equal to 99,999,999, the base form works fine. Why????
I have verified all the attributes for the database columns and form fields and all seems to be okay, and I am running out of my wits. I am desperately in need of your help in resolving this issue soon because pressure is on...
Thanks in advance for any/all the help.Orchid wrote:
I received the following error message while entering a number within the maximum value (i.e. 9,999,999.) allowed in a data entry form which is separate from the base form:
ORA-06502: PL/SQL: numeric or value error:number precision too large ORA-06512:at "<Owner>.<Trigger>", line 194 ORA-04088: error during execution of trigger "<Owner>.<Trigger>"
Where <Owner> is the schema name and <Trigger> is the trigger name. The data block of the entry form is based on a database table, and the sum of all values entered (w/ a maximum value of 99,999,999.) is displayed in the base form. A grand total of this sum along w/ other totals on the base form is also displayed w/ a maximum value defined as 999,999,999. I only receive the above error message when the grand total is greater than 99,999,999. If the grand total is less than or equal to 99,999,999, the base form works fine. Why????
I have verified all the attributes for the database columns and form fields and all seems to be okay, and I am running out of my wits. I am desperately in need of your help in resolving this issue soon because pressure is on...
Thanks in advance for any/all the help.check your associated database column length. It's precision is not able to hold you said value. increase the length by
ALTER TABLE table_name
MODIFY (column_name NUMBER(20) );it's above solution don't work. Then, probably you use variable in the trigger code which hold the vale and it's size is limited. increase it.
added
try this
increase the length of TAB_S_TOT_COST 9 to 18.
and your problem will solved.
Hamid
Edited by: HamidHelal on Feb 13, 2013 10:28 AM
Maybe you are looking for
-
Hi Gurus, One of my essbase app has stopped. I tried to start it from the EAS console and it does not start. It give a message, the following application did not start. It gives ERROR 1002097 Unable to load database Any suggestions? Thanks
-
IPhoto Events has restored every photo I have ever deleted. How can I get rid of them?
I have been away from my Mac for 3 weeks and I log into iPhoto today to find that every Event has restored all my previously deleted photos - this means tens of thousands of photos in total and would take weeks to go though and delete again. Is there
-
Number of Plot setting in XY Graph
Hi all, Here i struck up with XY Graph. The problem is i need to set the number of plots for XY graph before i am going to start to plot. I searched such kind of property. I couldn't...Is there any possibilities?????....
-
Hi Experts, We are having issue with the local build of DC in NWDS. We are having a Track which contains few SCs, now a new SC has been created and further new DCs in the newly created SC. Now when I am trying to build the new DC it is giving me the
-
Are 3 to 4 year old iMac's regarded as "vintage"?
I have an iMac 24" that is between 3 and 4 years old, and very happy with it until one day found that it would show nothing on the screen. The power button went on and off ok, but that was it. I took the iMac into the Apple Service Center here in Phu