Error in extracting

hi.i downloaded sap netsweaver 7.01 two files.tried extracting first zip file with winrar.got crc failed error on load_datasave.gz
..i think i have to rename this file as rar or zip.but i dont know how to do it..please some one help with extracting ..thanks

hi pls  someone reply. do i need to redownload the same..

Similar Messages

  • Error while extracting the data in R/3 production system,

    Hi Team,
    We got the following error while extracting the data in R/3 production system,
    Error 7 When Sending an IDoc R3 3
    No Storage space available for extending the inter 44 R3 299
    No storage space available for extending the inter R3 299
    Error in Source System RSM 340
    Please guide us to fix the issue

    It´s very difficult to help you without knowing
    - what is going to be transferred
    - where you get this error
    - system configuration
    - actual memory usage
    - operating system
    - database and configuration etc. etc.etc. etc.
    I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
    Markus

  • Error while extracting huge volumes of data from BW

    Hi,
    we see this error while extracting huge volumes of data (apprx 3.4 million and with more no.of columns) and we see this error.
    R3C-151001: |Dataflow DF_SAPSI_SAPSI3131_SAPBW_To_Teradata
    Error calling R/3 to get table data: <RFC Error:
    Key: TSV_TNEW_PAGE_ALLOC_FAILED
    Status: EXCEPTION SYSTEM_FAILURE RAISED
    No more storage space available for extending an internal table.
    >.
    We are not sure if DoP works with source as SAP BW, but when tried with DoP also, we got the same error.
    Will this issue be resolved with an R/3 or ABAP dataflow? Can anyone suggest some possible solutions for this scenario?
    Sri

    The problem is that you've reached the maximum memory configure for your system.
    If this is batch job reconfigure the profile parameter
    abap/heap_area_nondia
    Markus

  • Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

    Hi Gurs,
    I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
    The error is:
    Update mode "Full Upload" is not supported by the extraction API
    Message no. R3011
    Diagnosis
    The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
    System Response
    The data extraction is terminated.
    Procedure
    Check for relevant OSS Notes, or send a problem message of your own.
    Your help in this regd. would be highly appreciated.
    Thanks,
    David.

    Hi David,
    I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
    Try to switch you DTPs/Infopackages to Delta mode.
    While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
    BR
    m./

  • Error While extracting data from FIAA and FIAP

    Hi Gurus,
    I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
    Ther Error is as follows:
    Request still running
    Diagnosis
    No errors could be found. The current process has probably not finished yet.
    System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
    Current status
    No Idocs arrived from the source system.
    Kindly help. Your points are assured.
    Thanks and Regards
    Prasad

    Hello Prasad,
    Have you already checked what happened in the source system ?
    You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
    It could be a clue of what happened in R/3.
    Let us know,
    Regards,
    Mickael

  • Error while extracting zip file

    I am using the following code to extract zip files from jar file
    source = "zip/test.zip"
    destination = "c:\\"
    public void unzip(String source,String destination){
              try{
                   ZipInputStream in = new ZipInputStream( this.getClass().getResourceAsStream(source));
                   FileOutputStream fos = null;
                   ZipEntry ze = null;
                   File ff = null;
                   while ( (ze=in.getNextEntry() ) != null ){
                        System.out.println( "name=" + ze.getName() );
                        ff = new File( destination + ze.getName() );
                        if ( ze.isDirectory() ){
                             System.out.println("making "+ze.getName()+" dir ("+ ff.mkdirs() +")");
                        else{
                             fos = new FileOutputStream( ff );
                             byte[] buf = new byte[1024];
                             int len;
                             while ((len = in.read(buf)) > 0){
                                  fos.write(buf, 0, len);
                             fos.close();
                             System.out.println("wrote file "+ff.getPath()+" success=" + ff.exists() );
                   in.close();
              }catch(Exception e){
                   e.printStackTrace();
         }     But i found error in extracting zip file
    java.io.FileNotFoundException: C:\eclipse\.eclipseproduct (The system cannot find the path specified)
    I need some quick response on it.

    Nothing to do with the resource path....thats fine. Use the code below.....most likely this will fix it.......
    Added a check for directories that start with a ".".  The File utility probably thinks its a file, also added a try....check it does make the "." directories.........dont forget the dukes.
        ZipInputStream zis = null;
        FileOutputStream fos = null;
        try
          zis = new ZipInputStream( new FileInputStream( "C:\\your_path\\your_zipfile_or_jar.zip" ) );
          ZipEntry ze = null;
          File ff = null;
          while ( ( ze = zis.getNextEntry() ) != null )
            System.out.println( "name=" + ze.getName() );
            ff = new File( "C:\\your_path\\" + ze.getName() );
            if ( ze.isDirectory()  || ze.getName().startsWith("."))
              try{ System.out.println( "making " + ze.getName() + " dir (" + ff.mkdirs() + ")" ); }catch(Exception e2){}
            else
              fos = new FileOutputStream( ff );
              byte[] buf = new byte[1024];
              int len;
              while ( ( len = zis.read( buf ) ) > 0 )
                fos.write( buf, 0, len );
              fos.close();
              System.out.println( "wrote file " + ff.getPath() + " success=" + ff.exists() );
          zis.close();
        catch( Exception ex )
          ex.printStackTrace();
        finally
          try { zis.close(); }catch(Exception ex){}
          try { fos.close(); }catch(Exception ex){}
        }

  • Error while extract DME file

    Hello Experts,
    One user is getting an error while extract DME (Payment File) from customized transaction. Other users are able to save the file on desired location.
    Error: C:\AB\filename.TXT not allowed in subscreens (Screen: )
    Please let me how to solve this issue.
    Thanks in advance.
    Regards,
    JA

    Closed Not Answered

  • Error while extracting from BI source

    Hi,
    We are facing a wierd problem:
    Scenario:
    Loading data from one DSO to another DSO with the help of transformation
    The DTP fails at second data package each time. First data package goes successfully but it fails at the second data package) We have tried to vary the data package for e.g. 100 records, 5 records etc.....no matter what we do the load fails at the second data package with the following error message.
    Error:
    Data package processing terminated
    Error while extracting from source EPUD0002 (type InfoProvider)
    System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
    Unknown error in SQL interface
    Error reading the data of InfoProvider EPUD0002
    Exception CX_RS_STEP_FAILED logged
    Workaround:
    We tried to increase the number of data package size so that all the records can be processed in only one data package and the load has never to request for 2nd data package . BUT as the data package size is big it takes long time to process and never completes....
    FYI...Our transformation has lots of abap coding ...
    Addn Info:
    SAP_BW   700   0010
    BI_CONT   703   0005
    SAP_BASIS  700  0010
    Any help will be highly appreciated...
    - Amit

    There must be some bug in the code which is causing this issue.
    try to debug it,
    refer: /people/community.user/blog/2007/03/29/sap-netweaver-70-bi-extended-capabilities-to-debug-a-data-transfer-process-dtp-request
    /people/dirk.herzog/blog/2005/02/11/abap-development-in-sap-bw

  • Short dump error when extracting delta records from R/3

    I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
    Below is the error message
    Kindly do the needful ASAP.
    Job started
    Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = 0ISCM_PAYMENT_01
             Current Values for Selected Profile Parameters               *
    abap/heap_area_nondia......... 2000000000                              *
    abap/heap_area_total.......... 2000000000                              *
    abap/heaplimit................ 40000000                                *
    zcsa/installed_languages...... DE                                      *
    zcsa/system_language.......... E                                       *
    ztta/max_memreq_MB............ 2047                                    *
    ztta/roll_area................ 6500000                                 *
    ztta/roll_extension........... 2000000000                              *
    2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
    ABAP/4 processor: MESSAGE_TYPE_X
    Job cancelled

    Hi,
    I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
    Another option is to look at OSS notes, because the error is giving you a standard extractor.
    Greetings,

  • Error in Extraction with Generic Datasource via Function Module

    Dear Gurus,
    Iam working for BI-HR module.We are extracting data with generic data source via function module. The client some more extra fields in already existing DS. So we made a copy of that Function module and tried to create new generic DS, we got error while extraction like "Error occured during the extraction process". Can you please help in resolving this issue, your valuable suggestion would be highly appreciated.
    Thanks and regards
    Arun S

    Hi,
    Which structure are you using??
    Are you using the same old structure for this function module as well.
    Have you enhanced the structure with new required fields.
    New extrac fields needs to be added to existing structure if you are using the same or create a new one and make sure that you have all the fields in the structure which you are going to use in the data source.
    You need to take care for the append as well and the issue could be in the code as well.
    Make sure you have written the proper code and just for the new fields done an append
    Thanks
    Ajeet

  • Time Stamp Error while extracting data from R/3

    Hi,
        We are getting time stamp error while extracting data from R/3.
    To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
    Please suggest me to solve.
    Thanks
    Subba Rao

    Hi,
    Time stamp error arises when the time stamp of the data source in source  system and target system are different.
    For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
    You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
    Here are some useful links.
    [R3 016 Time stamp error where is it in BI?;
    [time stamp error in bi7;
    [Timestamp error in BI7;
    Thanks,
    Venu

  • Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

    Hi experts!
    Got an error when extracting data with extractor 2lis_04_matnr.
    System says (short dump):
    DUMP TEXT START----
    Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
    Exception:   CX_SY_IMPORT_MISMATCH_ERROR
    Error when attempting to import object "MC04P_0MAT_TAB".
    The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
    An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure  "MCEX_BW_LO_API" "(FUNCTION)".                                                                             
    Since the caller of the procedure could not have expected this exception      
    to occur, the running program was terminated.                                
    The reason for the exception is:  When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
    DUMP TEXT END----
    Please, can someone explain me how to solve it? 
    Really need help ASAP!
    Thanks in advance,
    Jaume
    Message was edited by:
            Jaume Saumell
    Message was edited by:
            Jaume Saumell

    Hi,
    Check this note: 328181
    So you need to delete entries in SM13/LBWQ for application and also detup table content.
    And then refill teh set up table.
    If you are in production clear the entries by running collective run no of times for this application 04.
    With rgds,
    Anil Kumar Sharma .P

  • Message no. R3009 - error in extraction program for the DSO

    Dear All,
    I get the following error, when I execute the data source object, when I select monitor button in the window the process is in Red.  So I couldn't get the report at the ODS.  Please help me to clear the following error :
    The extraction program does not support object ZSHIPTRACKND
    Message no. R3009
    Diagnosis
    The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject ZSHIPTRACKND.
    System Response
    The data extraction is terminated.
    Procedure
    Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
    with Regards,
    Jerald

    What release are you at?
    Have you searched SAP Notes and the SDN forums for this. A quick search indicates 9 SAP Notes and 15 SDN posts regarding this error message. Unless we know what release level you are at we are unable to offer viable solutions.

  • Error during extraction with UD Connect

    Hi All,
    I established connection to my source system through UD conenct and it is successful. The check on Source systems is fine and SM59 check is fine. However when I try to create a datasource and in the Extraction tab, click on the Source Object selection, I get the error:
    "Error while extracting field list of UD Connect object: UDCADAPTERROR::RSSDK|200|Cannot open the connectio"
    Can you please help me?
    thanks
    Lupita

    Hi,
    This error is related to JCo connection, tell BASUS person to look into this error, they may restart JCo services. check connection on datasource and try loading
    Regards,
    Daya Sagar

  • Exception in thread "main" org.apache.axis2.AxisFault: Error in extracting

    I am getting this exception when I call the web service from the client. Please help me here.
    Exception in thread "main" org.apache.axis2.AxisFault: Error in extracting message properties
         at org.apache.rampart.handler.RampartSender.invoke(RampartSender.java:70)
         at org.apache.axis2.engine.Phase.invokeHandler(Phase.java:340)
         at org.apache.axis2.engine.Phase.invoke(Phase.java:313)
         at org.apache.axis2.engine.AxisEngine.invoke(AxisEngine.java:262)
         at org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:427)
         at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:406)
         at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
         at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
         at com.ttdev.ss.SecureServiceStub.concat(SecureServiceStub.java:182)
         at com.ttdev.ss.SecureClient.main(SecureClient.java:29)
    Caused by: org.apache.rampart.RampartException: Error in extracting message properties
         at org.apache.rampart.RampartMessageData.<init>(RampartMessageData.java:386)
         at org.apache.rampart.MessageBuilder.build(MessageBuilder.java:61)
         at org.apache.rampart.handler.RampartSender.invoke(RampartSender.java:64)
         ... 9 more
    Caused by: org.apache.ws.security.WSSecurityException: Error in converting SOAP Envelope to Document; nested exception is:
         java.lang.UnsupportedOperationException: TODO
         at org.apache.rampart.util.Axis2Util.getDocumentFromSOAPEnvelope(Axis2Util.java:161)
         at org.apache.rampart.RampartMessageData.<init>(RampartMessageData.java:272)
         ... 11 more
    Caused by: java.lang.UnsupportedOperationException: TODO
         at org.apache.axiom.om.impl.dom.DocumentImpl.setStandalone(DocumentImpl.java:415)
         at org.apache.axiom.om.impl.builder.StAXOMBuilder.createDocument(StAXOMBuilder.java:190)
         at org.apache.axiom.om.impl.builder.StAXOMBuilder.<init>(StAXOMBuilder.java:105)
         at org.apache.axiom.soap.impl.builder.StAXSOAPModelBuilder.<init>(StAXSOAPModelBuilder.java:167)
         at org.apache.rampart.util.Axis2Util.getDocumentFromSOAPEnvelope(Axis2Util.java:130)
         ... 12 more
    Client WSDL:
    <?xml version="1.0" encoding="UTF-8"?>
    <wsdl:definitions name="SecureService"
    targetNamespace="http://ttdev.com/ss"
    xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200512"
    xmlns:wsp="http://www.w3.org/Submission/2006/SUBM-WS-Policy-20060425"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:tns="http://ttdev.com/ss"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurityutility-1.0.xsd">
    <wsdl:types>
    <xsd:schema targetNamespace="http://ttdev.com/ss">
    <xsd:element name="concat">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="s1" type="xsd:string"/>
    <xsd:element name="s2" type="xsd:string"/>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    <xsd:element name="concatResponse">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="r" type="xsd:string">
    </xsd:element>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:schema>
    </wsdl:types>
    <wsdl:message name="concatResponse">
    <wsdl:part name="parameters" element="tns:concatResponse">
    </wsdl:part>
    </wsdl:message>
    <wsdl:message name="concatRequest">
    <wsdl:part name="parameters" element="tns:concat">
    </wsdl:part>
    </wsdl:message>
    <wsdl:portType name="SecureService">
    <wsdl:operation name="concat">
    <wsdl:input message="tns:concatRequest">
    </wsdl:input>
    <wsdl:output message="tns:concatResponse">
    </wsdl:output>
    </wsdl:operation>
    </wsdl:portType>
    <wsdl:binding name="SecureServiceSOAP" type="tns:SecureService">
    <wsp:PolicyReference URI="#p1" wsdl:required="true"/>
    <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <wsdl:operation name="concat">
    <soap:operation soapAction="http://ttdev.com/ss/NewOperation"/>
    <wsdl:input>
    <soap:body use="literal"/>
    </wsdl:input>
    <wsdl:output>
    <soap:body use="literal"/>
    </wsdl:output>
    </wsdl:operation>
    </wsdl:binding>
    <wsdl:service name="SecureService">
    <wsdl:port name="p1" binding="tns:SecureServiceSOAP">
    <soap:address location="http://localhost:8080/ss/p1"/>
    </wsdl:port>
    </wsdl:service>
    <wsp:Policy wsu:Id="p1">
    <sp:AsymmetricBinding>
    <wsp:Policy>
    <sp:InitiatorToken>
    <wsp:Policy>
    <sp:X509Token sp:IncludeToken="http://schemas.xmlsoap.org/ws/2005/12/securitypolicy/IncludeToken/AlwaysToRecipient">
    <wsp:Policy>
    <sp:WssX509V3Token10/>
    </wsp:Policy>
    </sp:X509Token>
    </wsp:Policy>
    </sp:InitiatorToken>
    <sp:RecipientToken>
    <wsp:Policy>
    <sp:X509Token sp:IncludeToken="http://schemas.xmlsoap.org/ws/2005/12/securitypolicy/IncludeToken/Never">
    <wsp:Policy>
    <sp:WssX509V3Token10/>
    </wsp:Policy>
    </sp:X509Token>
    </wsp:Policy>
    </sp:RecipientToken>
    <sp:AlgorithmSuite>
    <wsp:Policy>
    <sp:TripleDesRsa15/>
    </wsp:Policy>
    </sp:AlgorithmSuite>
    </wsp:Policy>
    </sp:AsymmetricBinding>
    <sp:Wss10>
    <wsp:Policy>
    <sp:MustSupportRefEmbeddedToken/>
    <sp:MustSupportRefIssuerSerial/>
    </wsp:Policy>
    </sp:Wss10>
    <sp:SignedParts>
    <sp:Body/>
    </sp:SignedParts>
    <sp:EncryptedParts>
    <sp:Body/>
    </sp:EncryptedParts>
    <sp:EncryptedElements>
    <sp:XPath>
    //*[local-name()='Signature']
    </sp:XPath>
    </sp:EncryptedElements>
    <sp:SignedSupportingTokens>
    <wsp:Policy>
    <sp:UsernameToken sp:IncludeToken="http://schemas.xmlsoap.org/ws/2005/12/securitypolicy/IncludeToken/AlwaysToRecipient"/>
    </wsp:Policy>
    </sp:SignedSupportingTokens>
    </wsp:Policy>
    </wsdl:definitions>

    I think you are asking this question not only on the wrong section but also on the wrong website.
    The error you are refering to is a Axis2 specific exception, you might get the best answer by posting your question to the Axis2 mailing list:
    http://axis.apache.org/axis2/java/core/mail-lists.html
    BTW your exception "java.lang.UnsupportedOperationException: TODO"
    => looks like you have some comment left over in your Web-Service invokation. Actually your WSDL has no Method "TODO" so where should this call route to? I guess you should debug your code that invokes the call. Is there really a method TODO.
    I am also a bit confused with "Client Side WSDL" actually only the server does create a WSDL file, client only reads it (maybe you have some code generator that uses the WSDL to generate some code .. but the client has no WSDL).
    Further you should post a complete working example that can be run by somebody else, espacially with such a specific problem. Otherwise I am afraid hardly anybody will push you to the right direction.
    Sebastian

  • Error "No extraction structure for event I3" running set up 2LIS_17_I3HDR

    Hi, Experts:
    I am trying to activate and run set up datasource for PM 2LIS_17_I3HDR, so that data can be extracted from R/3 into BW 3.5 system.
    In R/3 environment, we have 2 clients. client 200 for configurations but has no data, and client 230 has data but can not change configurations.
    I have done the following in client 200:
    - Activated datasources for for PM 2LIS_17_I3HDR in RSA5.  
    - Made selection in RSA6.
    - Activated extract structures and datasource for application 17 in LBWE and also ran job control. Now I can see the extract structures for application 17 are active in client 200 only, but inactive in client 230. I tried to turn then active in client 230 but got error "Client 230 has status not modifiable".
    - I assume I should run set up tables in client 230 because it is the client with data in tables? But when run set up in OLIIBW, I got the error "
       No extraction structure for event I3: Messages active
       Message no. MCEX106
       Diagnosis
       You called the setup for the extractor structures of application '17' (Plant Maintenance). However no extractor structure is active for event I3 (messgaes).
       System Response
       Data for event I3 is not transferred to the BW interface.
       Procedure
       First activate the desired extractor structures for application '17' using the Customizing Cockpit and then start the setup again."
    - I can not manually activate extract structures in client 230 because it is not modifiable. I tried moving transports, the path is not set up. I see extract structures for other applications like 11, 13 are active. So I guess there may be other ways to activate the extract structures in client 230.
    - I also tried to run set up in client 200, which has extract structures for 17 in active status. But got the same error as client 230.
    Would anyone please help me with what to do to fix this?
    Thanks,
    Jenny
    Edited by: Jenny Chen on Oct 29, 2009 6:38 AM

    Hi, thanks for the reply!
    Just update for what we did to solve this. Both clients are for development. Client 200 is only for configuration but no data. Client 230 has data but not modifiable. Usually, when we create a structure, table, program, or active anything in 200. We will see it in 230 right away without transports. But this is not the case for activating extract structure for datasource from Business Content. We end up having Basis guy manually activate the structure for us directly in client 230 with transaction LBWE. That worked.
    Thanks,
    Jenny

Maybe you are looking for

  • EJB 3.0 and Spring

    Hi I have created a new EJB 3.0 project using NetBeans that I am deploying to Sun Application Server 9.1. I would like to use Spring with this project. I have used Spring in the past with Web Applications and know how to configure Spring to load the

  • /SAPAPO/OM_ORDER_CHANGE: Error

    Hello Experts, I am trying to update planned order components qty, but i am getting  LC_APPL_ERROR                = 3. Can any one help me on this , whether i passed required parameters or not.   CALL FUNCTION '/SAPAPO/OM_ORDER_CHANGE'     EXPORTING

  • Preview constantly freezing on pdfs

    Is there a way to prevent the preview application from constantly freezing when loading some PDFs. It seems as though you can load it up but after scrolling down a couple of pages it just hangs and needs a force quit. This is incredibly frustrating.

  • 9.0 2 Patch Update

    Am I able to install the 9.02 Patch update if I have Robohelp 8? Thanks

  • News Sap Portal

    Hi Experts, Is there a native solution to post News in Sap Portal, and show it in a iView? Look the image: [http://dopaulo.com/trecos/imgs/3.JPG|http://dopaulo.com/trecos/imgs/3.JPG] Thx!