Error in Forms 3 Upgrade

Hi,
I am trying to upgrade a Forms 3.0 application to Forms 6i. I am trying the upgrade using the Oracle converter ifcmp60.exe with the UPGRADE option set to YES.
Some .INP files are successfully getting migrated to .FMB files. But, some end up with the following error message. The error is "Message 770 not found; product=forms60; facility=FMG". The FMB is also not getting created.
Can anyone suggest what is causing the error and how to resolve the same?
Thanks in advance!!!
Regards
Sankaram

Error 770 can appear when upgrading Forms 3.0 forms to Forms 4.5, 5.0 or 6i when the 3.0 form references a program unit out of a form which has been stored in the database.
The problem will occur if the Form has a reference block:
e.g.
DEFINE PROCEDURE
NAME = myproc
DEFINE REFERENCE
OWNER = SCOTT
APPLICATION = LIB_FORM
PROCEDURE = myproc
ENDDEFINE REFERENCE
ENDDEFINE PROCEDURE
Which refers to a Library Form or procedure in that library Form that does not actually exist.
Solution: Correct the reference in the INP file before upgrading.

Similar Messages

Error: Oracle Forms Designer has stopped working

I have read a lot of different responses regarding this and related issues but none of the answers seem to be relative to my specific problem. Here is what I have done so far:
a. I just finished loading Oracle 11g 64x enterprise on my laptop running windows 7. It loaded correctly and I was able to import my 10g data dump and set up my schema.
b. I then installed the Oracle development suite: ds_windows_x86_101202_disk1 and disk2. There were some minor issues regarding compatibility but following the advise of one post, I checked the blocks in question and the software loaded fine.
c. I also attempted to install the p5969392_10123_WINNT.zip file but it gave a message indicating that no updates applied. (I am not sure if this is the correct patch or not?)
d. I also had to download and install the Sun SDK, v6.18.
e. I also updated the ORACLE paths in the default.env and registry entries and tried different urls in the runtime preference block. Nothing helped and I stayed with the default.
Oracle Forms seems to startup correctly and I am able to connect to the database with no problem. Although I did not build a new form completely, it appears that this would be no problem.
The problem:
The problem is that when I attempt to open a form that was previously developed in 10g on XP, I immediately get the "Oracle Forms Designer has stopped working" error and Forms Builder shuts down. I get the same error whether I attempt to open a library, menu, or form.
I have tried changing the compatibility mode from XP, service pack 3 (the default after install) to XP, service pack 2 but it made no difference.
If anyone has been able to work through this issue, please let me know how. Thanks

Gauthier Ooms wrote:
We've had similar problems in the past, but found a working solution (using this + other forums):
1. Install Oracle DevSuite 10.1.2.0.2
2. Install Patchset 5983622 to upgrade DevSuite to version 10.1.2.3 (this upgrade is needed in order to do step 3)
3. Install Patchset 7047034 to fix the crashing problem in the Forms Builder. (installation instructions are provided in the patchset)Issue no 3
from Patchset 7047034 readme file..
3.1 Platforms and Components for Patch 7047034 for Oracle Database Release 10.1.0.5How this patchset goes with the form Builder?
But according to THIS link.. It works ;)
Hamid

Error Running Forms: Failure of server APACHE bridge

Hi Everyone,
I have this problem on windows 7 64-bit... installation went fine without any errors.
Forms was working fine, i was able to run test form, and a form that i created, and both were running properly..
suddenly, while testing a new form module, it didn't work, and its showing :
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF. I stopped and started the wls_forms and it didn't solve the problem..
i couldn't get to a solution anywhere, is it a problem with weblogic configuration? but how was it working well at the begining... if weblogic services are not starting, then what's the fix for that?
Help would be appreciated...
Thanks..

No, but as said you installed components (the HTTP Server) you wouldn't need for development. Did you start WLS_FORMS?
In any case the latest version of forms would be 11.1.2 where the installation process for a development machine is much easier.
You'd need
- wls1035_generic.jar and a 64bit java runtime
- the 64bit version of forms 11.1.2: http://download.oracle.com/otn/nt/middleware/11g/111200/ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1.zip
of course you can install the 32bit version of forms too on your 64bit machine.
then during installation just check "development mode", and you get a development installation like you got with iDS 10.1.2 with one weblogic instance instead of 3 and all the components you won't need (like webcache or the http server) won't be installed.
cheers

"Invalid Cursor" Error in Form

Hi,
I wrote a procedure that take a REF CURSOR as an IN OUT argument. This procedure does an "OPEN cursor FOR qry" with a dynamic query:
OPEN l_cursor FOR
       'SELECT A '||
         'FROM B '||
        'WHERE C = :l_var'
     USING myVar;After calling the procedure, I do a LOOP with FETCH.
It works well when I use it in SQL*Plus with DBMS_OUTPUT but it returns a "ORA-01001 invalid cursor" error in Forms.
Any help is welcome!
Regards,
Olivier.

I found a solution on Metalink:
Note:170881.1
Note: 1007395.6
Olivier.

Error while doing EHP4 upgrade in downtime phase

HI .
Iam facing the below error while doing the EHP4 upgrade , in downtime phase.
Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 >
Connect to SAP gateway failed Connect_PM GWHOST=Hydhtc4526D, GWSERV=sapgw04, SYSNR=04 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.136.162.30:3304' not reached TIME Mon Jun 06 18:17:46 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 3286 DETAIL NiPConnect2: 10.136.162.30:3304 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER System start failed
Please help me in resolving this error.
Sanketh.

Hi,
Upgrade tool is trying to start the system but system is not coming up. Try to start system manually and see if system comes up or not. If not then check logs in work directory for why system is not coming up.
Thanks
Sunny

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

Error while posting GR "Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX

Dear Experts,
While posting GR for any non-valuated material, I am getting an error "Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX in position 1 with RC 0
Message no. C+099"
Kindly explore the possibilities of solution for the above error. The abve error only showing at the time of posting and not whicle Check.
Regards,
Tushar

Hi Tushar,
Your problem is happening because of the applicaiton of an SAP Note. I think PM has nothing to do with this Error. Pl. read the following (which I read this from one SAP website) & check the relevant SAP notes and take action or write to SAP for solution.
Symptom
The posting of goods receipts results in a long runtime.
Other terms
ACTUPD, MIGO, performance, material ledger
Reason and Prerequisites
The actual costing is active.
The performance problems usually occur when there are several procurement alternatives or procurement processes (tables CKMLMV001 and CKMLMV002) for certain materials.
This can be caused by implementing the modification according to Note 1017470 or 919869, [...]
Regards,
Bala.

Error message while while upgrading FIM RTM to FIM Service pack 1

Hi All,
I am getting the below error message while while upgrading FIM RTM to FIM Service pack 1, I had followed the same procedure in one of my test lab and it upgraded successfully. Kindly advice.
Regards,
Anirban Singha

HI Dominik,
Thanks for reply,
Event Error,
Product: Forefront Identity Manager Synchronization Service - Update 'FIM Synchronization Service Hotfix KB 2814853' could not be installed. Error code 1603. Additional information is available in the log file E:\FIMR2-SP1\logfile.txt.
MSI Logs:
CustomAction DetectServiceAccount returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 15:06:14: DetectServiceAccount. Return value 3.
MSI (c) (C4:10) [15:06:14:359]: Doing action: SetupCompleteError
Action 15:06:14: SetupCompleteError.
Action start 15:06:14: SetupCompleteError.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Note: 1: 2262 2: Binary 3: -2147287038
Action 15:06:14: SetupCompleteError. Dialog created
MSI (c) (C4:A0) [15:06:14:376]: Note: 1: 2731 2: 0
Action ended 15:06:19: SetupCompleteError. Return value 2.
Action ended 15:06:19: INSTALL. Return value 3.
MSI (c) (C4:10) [15:06:19:627]: Destroying RemoteAPI object.
MSI (c) (C4:E0) [15:06:19:628]: Custom Action Manager thread ending.
Property(C): DiskPrompt = [1]
Property(C): UpgradeCode = {545334D7-13CD-4BAB-8DA1-2775FA8CF7C2}
Property(C): PID = 04783-270-0001260-04309
Property(C): MIIS_PATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): INSTALLDIR = C:\Program Files\Microsoft Forefront Identity Manager\2010\
Property(C): WWF35 = 3.5.30729.5420
Property(C): DOTNETINSTALLROOT = C:\Windows\Microsoft.NET\Framework64\
Property(C): SQLDB = FIMSynchronizationService
Property(C): EVENTSOURCE = FIMSynchronizationService
Property(C): EVENTPRODUCTNAME = FIM Synchronization Service
Property(C): SYNCINSTALLPATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): GROUPADMINS = MPHASIS\FIMSyncAdmins
Property(C): GROUPOPERATORS = MPHASIS\FIMSyncOperators
Property(C): GROUPACCOUNTJOINERS = MPHASIS\FIMSyncJoiners
Property(C): GROUPBROWSE = MPHASIS\FIMSyncBrowse
Property(C): GROUPPASSWORDSET = MPHASIS\FIMSyncPasswordSet
Property(C): SQLServerStore = LocalMachine

Error in "tempInit" when upgrading Flash MX AS2 FLA to Flash CS6 AS3 FLA

I experienced a compiler error in "tempInit" when upgrading an AS2 project to AS3. "tempInit" is something internal to Flash Authoring, because it doesn't exist in my project and other people have gotten the same error.
I've read about this problem, and everyone thought it was because of an instance with a bad name, such as one that includes spaces or equals a keyword or something like that, and people have shot down the idea that the problem is with the library symbol, but I'm convinced now that it's a corrupted library symbol. Here's why:
I had 8 instances of a particular movie clip on stage, each on a different frame.
When I deleted the symbol from the library, the compiler error went away (but so did my stage instances). So that simply tells me that the problem is with that particular clip (I originally had to delete each clip in my library one at a time and recompile to determine the offending clip), but that obviously didn't rule out the name problem since the stage instances get removed when I deleted the corresponding library symbol. Still, I knew it couldn't be a name problem, because all instances had a valid name "mainidea".
I ruled out the name problem by creating a new library symbol identical to the first (it's just a few text fields with a rectangle drawn around them). Without changing the names of the existing instances on stage, I used the "swap" button to swap in the new library symbol. The use count on the old one dropped to zero, and the use count on the new one went up to 8. The compiler error was gone, and it only went away once the use count for the old symbol was zero.
The old and new library symbols are identical as far as I can see. Same child objects at the same positions, same textfield content, same child instance names, no ActionScript code, etc. Since there was no discernible difference, I came to the conclusion that the original library symbols had somehow been corrupted under the hood, somewhere in the pipeline between opening an old Flash MX file and setting the flash player version to 11.4 and selecting AS3 as the script language. Somewhere in that process, the Flash Authoring environment screwed something up. Does anyone know anything about this problem?
I have hundreds of files I need to upgrade, and that symbol was copied to each of them as they were created years ago, and I think I'm going to experience this problem with all of them. It's time-consuming to duplicate the old symbol and replace all the instances for every single file, so I'm trying to find the source of the problem and a workaround to avoid it.

It works, but slowly as if somer AS1 code is interpreted into
very
ineffective machine code by AS2 interpretor
My question was if it is know which particular AS1 features
have these
problems in AS2
"ggshow" <[email protected]>
ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ
× ÎÏ×ÏÓÔÑÈ
ÓÌÅÄÕÀÝÅÅ:
news:f17r79$efu$[email protected]..
> some AS1 not working when the movie run in AS2...
> if you want to publish it as AS2, then write it in AS2.
>
> * it is time to learn AS3
>

Fatal error distributing forms with Adobe Acrobat 9 Pro

Fatal error distributing forms with Adobe Acrobat 9 Pro.
I click
"Adobe Acrobat Pro/Formularer/Distribuer formularer/"
("Adobe Acrobat Pro/Forms/Distribute forms/")
and chose a form for distribution and in the picture "Distribute Form" chose
"Automatically download & organize responsees with Acrobat.com".
I then click "Next" and write an email-address to send it to (i.g. to my own)
and then click "Send".
The program quickly writes
"Authenticating email-addresses"
and then gives the following error message
"Borland Database er ikke installeret. Kan ikke indlæse tjenesteudbyder af Corel-adressekartotetek."
("Borland Database is not installed. Can not read load service provider of Corel address directory.")
When I clik "OK" I get the error message
"Adobe Acrobat has encountered a problem and needs to close. We are sorry for the inconvenience."
I have undeleted and reinstalled Adobe Acrobat many times without any effect.
The same procedure has been tried on another computer without any problem.
What is my problem and how do I resolve it ?
Operating System Windows XP
Has worked may times before
Same results with other files
No recent system hardware or software change

This is the image that I have plus....
Reader 9.0 AcroRd32.exe caused Microsoft Visual C++ Runtime Library error
Preinstalled Adobe 9 Standard doesn't work on a new Dell out of the box - why would it?
Need help in creating a batch file that will add and remove some registy keys.
%userprofile%

Error occurred during automatic upgrade of MDL file

The MDL file is exported from 10.2, we were trying to imported it into 11.2 using OMBIMPORT, got following error message.
MDL1323: Error occurred during automatic upgrade of MDL file </opt/etl/etl.mdl>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Any suggestion is greatly appreciated.

I had the same problem
MDL1323: Error occurred during automatic upgrade of MDL file <>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Reason:
I exported mdl from 11.2.0.2 version to 11.2.0.1
Solution:
- Upgrade version DWH from 11.2.0.1 to 11.2.0.2
- Install separate client on the server DWH and run import script from client directory

Error in form server6i ifweb60

Error in form server6i ifweb60
Hi all
We are using oracle formsserver6i on win2003 server as application server . Usually each ifweb60 gets 18 – 25 MB memory, but Sometimes one or more of them starting to get more and more memory (I've seen 250MB) and then finally we get an Microsoft visual C++ runtime library error window with following text:
Assertion Error in ifweb60.exec
File=e:\994w32\src\if\iff\ifzexe.c
Line: 1183
Exception: hifxc == hifxc_old
Pres Retry to debug application – JIT must be enabled
Is it a application related error or it’s a bug?
Does any body have any workaround this problem?
Thank you in advance.
Alireza
Message was edited by:
areh74

I am with Mediware Information Systems and we have an opening for a Senior Oracle 6i DBA if you know of anyone who has 5 yrs. of Oracle 6i DBA experience. If so, they can send their resume to [email protected] with the subject line 06-029.
Thanks!

Error in GENSTATUS during upgrade from CRM 4.0 to CRM 2007

Dear experts
We have 12 errors in GENSTATUS after upgrading our CRM system from 4.0 to 2007. I don't know how to solve them - I had a look at SDN forum, OSS notes without success. Our system was previously connected to MSA but we want to turn it off part of this upgrade.
Below are the generation errors. I couldn't solve any of them:
CNBCCPSAP00070            CG          GNREP                  E              F              Could not find active BDoc for TRANS_ID CNBCCPSAP00070 - Identification not possible via TransID / Name
CNBCCPSAP00070            CG          LUTAB                   E              F              Could not find active BDoc for TRANS_ID CNBCCPSAP00070 - Identification not possible via TransID / Name
MSV_COUNTER               CG           GNREP                  E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
MSV_COUNTER               CG           LUTAB                   E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
0000000001CG 5ABEB7BA9F5BD3118A5F00A0C9AA8D71                PUBLI                    E              F              Database access error using table SMOG_GFUGR
F000000272CG F3CFBBF7F736D844995523584B67E937     PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
F000000273CG CDF390E3E874144F8399B0F88E37F9F2      PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
MSV_COUNTER               HT           GNREP                  E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
MSV_COUNTER               HT           LUTAB                   E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
0000000034HT B49F577F7D5BD3118A5F00A0C9AA8D71 PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK_IL2
F000000273HT 42411AD9608668DAE10000000A1552B6    PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
F000000272HT 42411ADC608668DAE10000000A1552B6    PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
Thanks a lot in advance for your help
Best regards
Stephanie

Hi Stephanie
Did you find a resultion to your genstatus issue.
We are in a similar issue currently - we have the following errors
CNBCCPSAP00070            CG
CNBCCPSAP00070            CG
DOC_HEADER                CG
S000000290CG 98FBC48FBE4A0040888E14E1C27C7262
CAMPAIGN_WRITE            CG
Look forward to your response on this
Regards
Eddie

What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don't know what that signifies. Help?

What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don’t know what that signifies. Help?
It is recommended that I ask for help, which put me here. What I really need is some customer service — not a chat room!

If Windows :
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from C: > Program Files > Adobe Photoshop CC 2014 .
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
It should update.
If Mac:
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from Applications folder:
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
Let me know if you face any error .
Error 49 occurs while updating the application , when Creative Cloud app does not have reference / Access to installed CC app, so that it can apply updates for the same .
You can try to update from CC app like Photoshop itself and check.

How to fix EXC_BAD_ACCESS error? I just upgraded to 10.7.5 and now I can't open any MS Word documents

How to fix EXC_BAD_ACCESS error? I just upgraded to 10.7.5 and now I can't open any MS Word documents.
I get this error message every time:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2013-05-28 02:28:42 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.3.4.130416
Crashed Module Name: Microsoft Word
Crashed Module Version: 14.3.4.130416
Crashed Module Offset: 0x00938638
Blame Module Name: Microsoft Word
Blame Module Version: 14.3.4.130416
Blame Module Offset: 0x00938638
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0
I tried to remove the plist files, but it hasn't worked! Please help!

What version of Microsoft Office for Mac do you have?
Pete

Error in Forms 3 Upgrade

Similar Messages

Maybe you are looking for