Error in getting both Text and Key of infoobject

Hello Guys,
I am working on BI 7.0 & BO XI 3.1, SP 3 and FP 3.6.
I have a requirement where in I have Infoobjects in BW like Internal Sales
Rep, External Sales Rep, External Manager in BW. I have infocube where I
have all these reps & keyfigures. I create BEx Query from the infocube and
was able to see Key and Text in BEx Query & RSRT but I can't see that Key
value in Webi report.
Note: I don't have Masterdata configured for Internal Sales Rep, External
Sales Rep, External Manager. These data comes directly from data source to
BW infocube. All the reps are referenced to 0PERSON infoobject in BI 7.0
Thanks in advance.
With Regards,
Chintan Vora.

Hi Geetha,
yes, it is possilble that, you can disply label for both key and text for a characteristics in Bex query, but for this you have to do small modification in modelling, here is one example:
Create one custom 'z' InfoObject lets say ZCUSTOMER with Reference Characteristic of 0CUSTOMER and add it to the data target, map it with same field for which 0CUSTOMER is mapped and load data into target (DSO, cube) or if you are reporting on multiprovider then assign it.
Because ZCUSTOMER is created with reference of 0CUSTOMER and mapped with the same source field , ZCUSTOMER will act as copy of 0CUSTOMER.
In query designer drag 0CUSTOMER and ZCUSTOMER. change display setting
0CUSTOMER display as Key only
ZCUSTOMER display as Text only.
You can apply this for all master characteristics.
Hope this will resolve your problem, because i have faced same requirement and implemented the same.
let me know for any further clarification.
Regards
Avinash

Similar Messages

How to display data with the same text and key in the drop down list?

Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
      LIST TYPE VRM_VALUES,
      VALUE LIKE LINE OF LIST,
      c(20) type c.
*      c = 'select any'.
data:begin of itab occurs 0,
      kunnr like kna1-kunnr,
      name1 like kna1-name1,
     end of itab.
data:begin of jtab occurs 0,
      kunnr like kna1-kunnr,
      land1 like kna1-land1,
     end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
                          default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'.     "---> Data for key is the same with text
VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AM

shawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
>       LIST TYPE VRM_VALUES,
>       VALUE LIKE LINE OF LIST,
>       c(20) type c.
>
> *      c = 'select any'.
>
> data:begin of itab occurs 0,
>       kunnr like kna1-kunnr,
>       name1 like kna1-name1,
>      end of itab.
>
> data:begin of jtab occurs 0,
>       kunnr like kna1-kunnr,
>       land1 like kna1-land1,
>      end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
>                           default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'.     "---> Data for key is the same with text
> VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh.

I am roaming in St Thomas and when I get a text and delete it it keeps coming back no matter what I try, I am roaming in St Thomas and when I get a text and delete it it keeps coming back no matter what I try

In roaming in St Thomas
When I get a text and delete it, it continues to be sent to me every few minutes
Tried everything

Purchases will always download to the computer you are making the purchase from. However, you can set iTunes to automatically sync those purchases to one central comptuer, in your case your home server, so that the purchases will be available to all computers and devices on the network using Home Sharing.
Home Share Sync
Make sure Home Sharing is turned on and working between both computers. Home Sharing is turned on when your can see the name of the other computer in the sidebar of the iTunes window. The icon will look like a house with a musical note on the side. On the computer that will act as the central home server select on of the other Home Share computers in the sidebar then click on the 'Settings…' button on the bottom right-hand side of the iTunes window. In the 'Home Sharing Settings' dialogue box put a checkmark in the box for each type of media you want to have synced between computers. iTunes needs to be running on both computers for the sync to occur. If iTunes is not running at the time of the purchase, sync will occur the next time iTunes is running and can connect to the other computer.
Automatic Store Downloads
On the computer that will act as the central home server go to the iTunes preference panel and select Store on the toolbar. Put a checkmark in the box for the the media types you want to have automatically downloaded from the iTunes Store. Whenever purchases occur on any computer or device with the same iTunes Store account iTunes will automatically download the media to that computer. This method only works for Music, App and Book purchases.

Is it possible to do a GLOBAL color change for both text and graphics in ACrobat XI?

I used to do this using the Pitstop Pro plugin but now Pitstop is almost $900 and this is the only thing that I would use it for, not worth the investment
I can change text color by selecting individual text items, but I want to change all of the red text into white text
I also need to change all of the red graphics into white graphics and I can't figure out how to do that either
I have a trial version of XI on a Mac and will buy it if it can do what I am trying to do, i.e. global color changes to both text and graphics
thanks!!

I have version 6, but it is way out of date, doesn't work on my current system, I downloaded a trial version of the new one, version 12 I think, now I have to decide if I can afford to buy it, it is not cheap!
oops, sorry, I didn't read your entire message, aargh!
I'll check with them if I can upgrade from this early version, thanks for the suggestion!
(edited because I didn't read properly!)

How do i get both mine and my wifes iPhones to photo stream. hers is the only one doing it

how do i get both mine and my wifes iPhones to photo stream. hers is the only one doing it

The best way is to not share Apple IDs but also make sure under Settings & Messages on both devices that only one phone number is checked.

What would happen if I added the itouch email to the add accounts on my iphone and confirmed that email address? Would only my iphone get both (itouch and iphone) messages? or will my itouch then also get my iphone messages as well??

What would happen if I added the itouch email to the add accounts on my iphone and confirmed that email address? Would only my iphone get both (itouch and iphone) messages? or will my itouch then also get my iphone messages as well??

Thank-you for clarifying third party and for pointing out the potential problems.
i will either have my phone unlocked by the carrier or get my phone service from them. switching carriers is not essential.
Thanks agin.
Cheers!

Display dialog, getting both text returned and button returned

I am most of the way through my first major project in applescript. I want to get both the text returned of and the button returned of a dialog box. Is this possible?
So basically i want to do the below without having the dialog box run twice.
set thebutton to the button returned of (display dialog "Already Assigned!" & return & "Please assign a new letter" default answer "…" buttons {"Cancel", "Delete Previous Location for this Letter", "OK"} default button "OK")
set theLetter to the text returned of (display dialog "Already Assigned!" & return & "Please assign a new letter" default answer "…" buttons {"Cancel", "Delete Previous Location for this Letter", "OK"} default button "OK")
Rich

Well thanks for the fast response, both work fine, cheers. That problem is now sorted.
However while i was waiting for the responses i came across another problem, i would like to delete a specified item from a list. This is not the actual script but i was using it to test the syntax. So basically how would i go about deleting the the letter P from a list PQ
set letterlist to {}
display dialog letterlist as string
set namep to "P"
copy (namep) to end of letterlist
set nameq to "Q"
copy (nameq) to end of letterlist
display dialog letterlist as string
set theKeyPressed to "P"
repeat with each_item in letterlist
if each_item contains theKeyPressed then
delete each_item
end if
end repeat
display dialog letterlist as string
Rich

How to get subject text and Reference Object both Screens at the Header lev

Dear Experts ,
                I am getting only Notification Header Screen ( Subject Text, Notification system and User Status) at the Header of Notification and different Tabs under that screen.
                I want Subject Text and Reference Object screens at header Level so that any screen Tab selected at a time I can see the Subject and Reference Object of the Notification.
                Pls tell me is there any way so I can Include 2 screens( Subject and Reference Object at the Header Level.)
With best regards,
Narendra

Narendra,
You can't in the standard system.
Only the tabs are configurable.
PeteA

Get Supplier text and internal note

Hello Experts,
I need to print Supplier text (item and header level both), Internal note of my shopping cart and Purchase order.
Is there any standard function module to fetch those text ?
what is the way to fetch those text and show it on my Print form.
Thanks!!
Sunny Sharma

Hi,
You can get the internal note BBP_PDLTX_GETDETAIL.
or
Use FM BBP_PD_SC_ITEM_GETDETAIL and pass SC item guid.
Get the internal note in E_LONGTEXT table
Regards,
Neelima
Edited by: S Neelima on Mar 15, 2010 12:44 PM

Error message uploading 0material text and attributes.

Dear all,
i have received an error message when uploading 0material text and attributes.
Error message is as follows:
RSDMD 194
Data record 512 & with the key '000000000000000081T &' is invalid in
value '000000000000000081 &' of the attribute/characteristic 0MATERIAL
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
any help?
thanks

Hi john mcquade,
Your error message says it all!
You have your 0material with wrong info to be loaded, check your PSA the records with error (should begin in record 512) and see what is inserted as 0material (probably you're missing some zeros before the number).
You could compare that record with another one (less than the record 512) to see an example of a material that has the right input and this one that exists here with errors.
Diogo.

Getting the text and the shape to play at the same time in Keynote '08

Searched FAQ without any luck. I put text into a shape. When 'played' however, the text comes in on first click, and shape on the second click. I would like both to enter slide simultaneously. How can I accomplish this ??
THanks Fred

Hi Fred,
There are two ways to achieve this. Firstly you can group the two objects and they will then appear at that same time once you select a build for the group.
You can use the Build inspector to do the same. Once you've chosen the build for the two objects click on the More Options button at the bottom. Select one of the objects (most likley listed as 'Text' and 'Shape' and chose from the Start Build sub menu 'Automatically with build X' where build X is the number of the build of the first object.

Error compiling movie. Unknown error. In both Premiere and Media Encoder

I am trying to export a a batch of six sequences, out of Premiere Pro CC to my internal hard drive using the Apple ProRes 422 Quicktime setting. All of the sequence exports are failing in the first couple of seconds. This happens if I do them individually directly out of Premiere and if I export them out as a batch to Media Encoder. All get the same "Error compiling movie. Unknown error." error message. I have tried restarting the computer, that didn't fix it. I had the same problem with some other files yesterday but I was able to export them out individually OK. But with this batch, no dice. The sequences are all fully rendered. There aren't any problematic clips in the sequences, not that I can tell. None of the sequences is very long, only about 1-2 mins each.
Any ideas?
My system details are:
MacBook Pro (Retina, 15-inch, Mid 2014)
2.5 GHz Intel Core i7
16GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 750M 2048 MB
plenty of space on my startup disk

Error Compiling Movie... some past discussions and ideas
-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
-and nested sequences http://forums.adobe.com/thread/955172

Standard Report to get both PR and PO number

Can anybody suggest a standard report which gives both PR and PO number. I am working with 4.6 release.

dear
choose ME5A and select closed requisition and run the report you will get it after set the dynamic selection,
this is the only way to get the PR and PO no. in a list else you can get individual as per the laxman.
regds
dev...!

Pie chart with both text and value

Hi,
I want the pie chart to contain both the text and value how is this possible when I look at the optiond for chart I was able to select only one thing at a time both not both the things at a time ,please let me know how is this possible
Thanks
Priya

Hi Priya,
this should be possible. In the Chart Designer in the properties of the Categories you must edit the Format string to e.g. "$Label$br0.00" (show the label, make a line break, show the value with 2 decimals). For more info regarding the format string see note <a href="http://service.sap.com/sap/support/notes/1064448">1064448</a>.
Best regards
Matthias

Navigation block shows text and key

Hello everybody!
Happy new year for all.
I have a problem with the web navigation block. I have setup that only the text is shown. If I use the attribute in the report or in the navigation block I see the text only (that is what I need). Now I will choose some attributes and I click in the navigation block on the attribute. A new window opens and in this window I see the text and the key but I don't need the key in the popup I only need the text. Any solutions?
Example (cars):
Ford               A
Opel               B
VW                C
Honda            D
Regards,
T. Franke

Hi,
that is my problem. I have an hierarchy added to the attribute.
BEx Query -> Attribute -> View as = Text -> Hierarchy has no view as settings.
Any other ideas.
Regards,
T. Franke

Error in getting both Text and Key of infoobject

Similar Messages

Maybe you are looking for