Pie chart with both text and value

Hi,
I want the pie chart to contain both the text and value how is this possible when I look at the optiond for chart I was able to select only one thing at a time both not both the things at a time ,please let me know how is this possible
Thanks
Priya

Hi Priya,
this should be possible. In the Chart Designer in the properties of the Categories you must edit the Format string to e.g. "$Label$br0.00" (show the label, make a line break, show the value with 2 decimals). For more info regarding the format string see note <a href="http://service.sap.com/sap/support/notes/1064448">1064448</a>.
Best regards
Matthias

Similar Messages

Pie chart with two measures and date dimension navigation not working

Hi Experts,
Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
Thanks
V

Hi Deepak,
I had time dimension in the RPD.
I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..???

BufferedReader with both text and binary data

I'm reading ascii data from a socket using the read(char[] cbuf, int off, int len) method for a BufferedReader. This data contains a mixture of text to be parsed and data for an image. The messege is of variable length and the text fields are delimited by markers such as "FOO" or "BAR". I have initialized the BufferedReader in two seperate ways. First is: new BufferedReader(new InputStreamReader(iplCommSocket.getInputStream()));
The second is : new BufferedReader(new InputStreamReader(iplCommSocket.getInputStream(),"8859_1"));
If I use the first, I don't think I am getting the data correctly, if I use the second, the string ( creating a new String(char[]) )I get back from the read operation has the text after the binary data clobbered. I've tried converting the char[] to a byte[] and then creating a new String with the byte array using the "8859_1" character encoding to no avail. Any help is greatly appreciated

Is there a reason that you are using BufferedReader? 'cause, if I were you I wouldn't. It's geared toward text data, not binary data. I would look into some flavor of InputStream or possibly a FileChannel with some clever way to use the ByteBuffer.
Good Luck
Lee

How to read a file with both text and binary data?

For text data I use a BufferedReader,
for binary data I use a DataInputStream.
Since readLine is deprecated in DataInputStream, how can I read in a proper way a file that contains some lines of text followed by some binary data.
Is there a way to do this without writing a new 'readLine' for DataInputStream (that has to take into account the different newlines for Unix en other OS's)?

sorry about that ^
NEW STRING str
WHILE there is stuff in the file DO
    getByte()
    IF reading a string THEN
        WHILE byte is not a return character DO
            convert the byte to character/string
            append char to str
        WEND
    ELSE IF reading raw data THEN
        parse raw data
        do stuff with it
    END IF
WEND

Pie chart with NULL values

I have a report(pie chart) with year, State, Category(Electronics,Home Appliances, Grocery) and % profit margin. The requirement is in a state if any of the categories is NULL the other two should become null as well for that state so that the whole pie chart will disappear. For example if electronics profit margin is NULL for a chosen state then Home appliances and Grocery profit margin should become null for that state as well. Can anyone please advise how this can be accomplished.
Thanks
R
Edited by: user1146711 on Jul 13, 2012 11:37 AM

user1146711 wrote:
I have a report(pie chart) with year, State, Category(Electronics,Home Appliances, Grocery) and % profit margin. The requirement is in a state if any of the categories is NULL the other two should become null as well for that state so that the whole pie chart will disappear. For example if electronics profit margin is NULL for a chosen state then Home appliances and Grocery profit margin should become null for that state as well. Can anyone please advise how this can be accomplished.
Thanks
R
Edited by: user1146711 on Jul 13, 2012 11:37 AMTry this:
--1) In addition to your mentioned columns, add 4 more "% profit margin" columns. (I am assuming this is a measures column.)--
--2) In each of the first 3 columns, click on the fx button, then on the Filters button and create a column filter "where category = 'Electronics' for the 1st column, "where category = 'Home Applicances' for the second column, etc...--
Each of the 3 columns in step 2 will contain the measure for the specific category, for the given year, some of which may be NULL according to your data.
--3) In the 4th dummy column, make it a concatenation of the prevous 3 columns.--
Because this is a concatenation, if any of the previous 3 columns are NULL, the sum will also be NULL. Make sense?
--4) Then finally, put a filter on the 4th column, "Is not Null."--
Now if any of the individual categories has a null, the whole state will be eliminated from your report. Hide the 4 columns. That's it.
The above won't work as the values of every row will have NULLs due to the way I said to build the report.
Okay, try this:
1) Build a small report with Year, State, SUM(% Profit Margin) and a concatenated column Year-State.
2) Put a filter on the SUM(% Profit Margin) column "Is Not Null."
If there are NULLS in any of the four categories, because your database does not substitute a 0, then the sum will be Null and there won't be a row that corresponds to that Year and State. The only rows that should appear in this report are those states for the year, that had a value in all 4 categories. The last column, Year-State will be unique and be the identifier.
3) Now build your main report with all your normal columns (Year, State, Category, % Profit Margin) and add a hidden column that is the concatenation of Year-State.
4) On the Year-State column, put a filter "based on another request" and point it to the "Year-State" column of the small report.
This should produce only rows where all 4 categories had a value in it for the given year.
Edited by: David_T on Jul 14, 2012 7:49 AM
Edited by: David_T on Jul 16, 2012 2:48 PM

Pie chart With one value

Hello Experts,
I am new to apex.
I want to plot a pie chart with only one value.
that one value should look like a one slice in the pie chart.
I tried it, but it showing as entire pie chart as one value.
So Please help me in this regard.
Its very urgent.
Please.

Hi,
Try creating the entire chart using custom XML and PL-SQL, it will give you full control over the sql and xml . Take look at this thread Re: Help Needed : Changing the Color of Bar Graph Dynamically , Change the data_plot_settings to line and you can refer to the http://www.anychart.com/products/anychart/docs/xmlReference/index.html for more detail on the tags and syntax. Thanks.
Regards,
Manish

Can we have the text and value displayed in the BI Graph ?

Dear Experts,
We are able to see the graph for a particular report in switching to Graphical Display
:I have selected Pie chart and the value and text is displayed on mouse over on each section.
Please let meknow if there ia an option to display the text and value along with the graph.
Regards
Manu

Manu Govind wrote:
Dear Experts,
>
> We are able to see the graph for a particular report in switching to Graphical Display
>
> :I have selected Pie chart and the value and text is displayed on mouse over on each section.
>
> Please let meknow if there ia an option to display the text and value along with the graph.
>
>
>
> Regards
> Manu
Dear Govind,
You can use BEx based WAD tool to acheive it. Edit the chart in the chart properties dialog, goto settings & edit the property. As you have requested you created 2 tabs, one for chart, another for data, and as and when you do changes in the Analysis grid, the chart values get adjusted.
P.S. Humbly a personal opinion; I do not recommend WAD; use XCELCIUS instead.
Best Regards, @{

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Creating a SVG Pie Chart With Different Portion Linking To Different URL

Is it possible to create a SVG pie chart in which different portion will point to different URL. on HTML DB version 1.5.1.00.12
For example i've tried something like this:
on page 20 i have a svg pie chart
select
'f?p=&APP_ID.:21:#APP_SESSION#::::P21_DD_SALESORG:'||region,region,code from demo_region;
i have a query in page 21 like this:
select country from demo_country where region= :P21_DD_SALESORG;
so when i click on a particular region on the pie chart on page 20 the value of item
P21_DD_SALESORG on 21 should be set.
but the value of P21_DD_SALESORG is always getting passed as NULL from the pie chart.
I've tried it on HTML DB version 1.5.1.00.12
Look for an early reply
Thanks & Regards,
Rupak
Message was edited by:
user445907

hi user445907--
your link column in your chart query seems to us the correct syntax, so i'd imagine the issue is with your data/query or the item name in question...
check the query and data: make sure your query returns valid values to be passed of to P21_DD_SALESORG. if so, you should see your links correctly formed as you hover your mouse over the individual slices. if your links look good then check your item names.
item names: if your links above look okay, then might you be setting the value of the incorrect item? please confirm that. after clicking a pie slice to get to page 21, check to see that P21_DD_SALESORG is correctly set by clicking the Session link in the developer toolbar.
basically, i'm suggesting that because your link column in your query looks okay, you'd want to see at what point the NULL value is being passed/set. try tracing things from the chart query over to page 21 (and try going backwards if you have to). if you can't find the disconnect, please feel free to set up an example on an instance, where i can take a look.
thanks,
raj

Pie Chart with Portal 3.0.8.9.8

I have two portal installations, one with version 3.0.8.9.8 and the other with version 3.0.9.8.0. I have enabled the beta feature "Image Charts From Query Wizard" on both installations. I can successfully create and display a pie chart on the newer version (3.0.9.8). However, on the earlier version (3.0.8.9.8), I can only create the pie chart but it does not display. That is to say, the pie chart creation is successful, but when I run it, it times out and never displays the pie chart. Has anyone experienced problems displaying a pie chart with 3.0.8.9.8? I need to create one on this older installation since it is the version my client is using.
Thanks,
Kendra

Do you have any logged error in jserv.log. Can you isolate the action of running the chart in 3.0.8.9.8 and find out corresponsing logging messages in jserv.log and error.log.

Sending emails with both body and attachment to multiple recipients

I have a requirement to send email with body and attachment to multiple recipients.
Body of the email is a standard text. It is a proxy-to-mail scenario.
Here is what I've done: (I'm using PI 7.11)
One mapping from Source to Target structure (format of the attachment text file)
Second mapping from Target Structure to Mail Package format.
In the second mapping I'm concatenating the output of first step into "Content" of the Mail Package.
"XIPAYLOAD" is the message protocol used.
The "Keep attachments" option in the Mail adapter allows only to send "Content" as attachment or as body of the email.
How to send an email with both content and text?
The other problem is even with using ASMA, I can't send email to multiple recipients. I can only do CC and TO for 1 person each - a total of 2. Although I can resolve this by creating mailing lists, it is better if this can be addressed in PI.
Thanks for any input you can provide!
Edited by: crazylad on Jan 18, 2012 3:39 PM

Thank you for your response Mikael.
For the first question, I was able to find the solution in the following blog:
XI Mail Adapter : Dynamically building attachment and message body content using a simple UDF
(I just needed to search with the right set of key words )
The key is to set the "Content Encoding" as "None" in the mail adapter. If this is not done, the mail will be sent with an attachment - untitled.bin containing both the mail body and the attachment text. Also, don't forget to check the "Keep Attachments" checkbox in the mail adapter.
Multiple recipients could be added by separating the email IDs with a Comma. I have used ASMA to set the recipients.

Cisco ISE with both internal and External RADIUS Server

Hi
I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
I will like to know if it is possible to configure it and how I can do it ?
Thanks in advance for your help
Regards
Blaise

Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.

Form report with both edit and column link

hi experts,
How can we create form report with both edit and column link. Ie, the form should have both the Edit link and column link. When we click on the edit link(in page1) it should go for the page2 and the page2 should display the corresponding row fields which should be editable. but when i click the column link it should bring me to the next page but the corresponding values of the column should not be editable.
Regars,
KK

hi,
Here i have achieved this by making the column link and page navigation.

Is it possible to do a GLOBAL color change for both text and graphics in ACrobat XI?

I used to do this using the Pitstop Pro plugin but now Pitstop is almost $900 and this is the only thing that I would use it for, not worth the investment
I can change text color by selecting individual text items, but I want to change all of the red text into white text
I also need to change all of the red graphics into white graphics and I can't figure out how to do that either
I have a trial version of XI on a Mac and will buy it if it can do what I am trying to do, i.e. global color changes to both text and graphics
thanks!!

I have version 6, but it is way out of date, doesn't work on my current system, I downloaded a trial version of the new one, version 12 I think, now I have to decide if I can afford to buy it, it is not cheap!
oops, sorry, I didn't read your entire message, aargh!
I'll check with them if I can upgrade from this early version, thanks for the suggestion!
(edited because I didn't read properly!)

Pie Chart with Legend

Hey Experts,
I have a small issue but cannot seem to find the solution. I have a pie chart with legends which I want to show side by side (horizontally). First pie chart and then legends. My requirement is that when the window is resized, the pie chart should also resize. I am able to show the chart and legends horizontally but when the legends list is long, the pie chart is always aligned in the center vertically. I tried setting all properties such as verticalAlign = "top", verticalCenter = "false", tried putting pie chart and legends in a separate VBox but nothing seems to work. Below is the code snippet.
I believe others would have faced this problem. Can someone help?
<mx:HBox width="100%" height="100%" verticalAlign="top" verticalCenter="false">
     <mx:VBox width="100%" verticalAlign="top" verticalCenter="false">
          <mx:PieChart id="pieChart" width="100%" height="100%" showDataTips="true" minWidth="200" minHeight="200" verticalCenter="false"/>
     </mx:VBox>
     <mx:VBox width="100%" verticalAlign="top" verticalCenter="false">
          <mx:Legend width="100%" height="100%" dataProvider="{pieChart}"/>
     </mx:VBox>
</mx:HBox>

Hi Dajji,
Here is the code which resolves the problem...
Note: In the code below I have removed the percentage width and height for PieChart.....that resolves the problem.....but the thing here is as you resize
your browser window the piechart width and height will not change accordingly...? Do you need PieChart to change its dimensions as your browser window
resizes...???
However if you specify width="100%" and height="100%" for PieChart you never gonna acheive the PieChart to be vertically alined to top.....why because
as you specified width="100%" and height="100%" for PieChart it occupies the total dimensions of the VBox but the actual visible portion dimensions are
less... because within the VBox you also have the legends so Flex will assign the sizes proportionately....for PieChart and Legends..
Hope you got my point...So you should remove the width="100%" and height="100%" for PieChart then you can acheive what you needed...
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" height="100%" width="100%">
    <mx:Script>
        <![CDATA[
        import mx.collections.ArrayCollection;
        [Bindable]
        private var medalsAC:ArrayCollection = new ArrayCollection( [
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 } ]);
        private function displayGold(data:Object, field:String, index:Number, percentValue:Number):String {
            var temp:String= (" " + percentValue).substr(0,6);
            return data.Country + ": " + '\n' + "Total Gold: " + data.Gold + '\n' + temp + "%";
        ]]>
    </mx:Script>
    <mx:Panel title="Olympics 2004 Medals Tally Panel" height="100%" width="100%" layout="horizontal" verticalAlign="top">
           <mx:VBox verticalAlign="top" height="100%" width="100%">
             <mx:PieChart id="chart"
                 showDataTips="true"
                 dataProvider="{medalsAC}">
                 <mx:series>
                     <mx:PieSeries
                         nameField="Country"
                         field="Gold"
                         labelFunction="displayGold">
                     </mx:PieSeries>
                 </mx:series>
             </mx:PieChart>
           </mx:VBox>
         <mx:Legend dataProvider="{chart}"/>
    </mx:Panel>
</mx:Application>
Thanks,
Bhasker Chari

Pie chart with both text and value

Similar Messages

Maybe you are looking for