Error in heterogenous system copy
Hi Guys,
I am getting n error during the import phase in het system copy. I am doing a system copy from AIX 5.3, DB2 UDB 8.1..1.88 FP 9 to Win server 2003 SP1, DB2 UDB 8.1.1.88 FP16.
The following is log from DBMIG.log file
INFO 2008-05-23 17:38:43 CommandFileController SyFileVersionSave:736
Saving original content of file C:\Users\bkdadm\Install\DBMIG.R3S
INFO 2008-05-23 17:38:43 CommandFileController SyFileCopy:676
Copying source file C:\Users\bkdadm\Install\DBMIG.R3S to target
file C:\Users\bkdadm\Install\DBMIG.R3S.3 ...
INFO 2008-05-23 17:38:43 CommandFileController SyPermissionSet:2207
Changing permission for file C:\Users\bkdadm\Install\DBMIG.R3S
from 777 to 666.
INFO 2008-05-23 17:38:44 Main
Preparation successfully completed.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'SAP'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:473
offical host name for 'SAP' is 'SAP.twc.pvt'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:541
host 'SAP' has ip address '192.168.192.35'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:581
offical host name for '192.168.192.35' is 'SAP'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'SAP'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:473
offical host name for 'SAP' is 'SAP.twc.pvt'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:541
host 'SAP' has ip address '192.168.192.35'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:581
offical host name for '192.168.192.35' is 'SAP'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'SAP'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:473
offical host name for 'SAP' is 'SAP.twc.pvt'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:541
host 'SAP' has ip address '192.168.192.35'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:581
offical host name for '192.168.192.35' is 'SAP'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'SAP'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:473
offical host name for 'SAP' is 'SAP.twc.pvt'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:541
host 'SAP' has ip address '192.168.192.35'
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 SyCheckHostnameLookup:581
offical host name for '192.168.192.35' is 'SAP'.
INFO 2008-05-23 17:38:44 DATABASEINSTANCE_NT_DB6 DefValForKey_OS:0
R3Setup found the share 'SAPLOC' on drive D:.
INFO 2008-05-23 17:39:00 CDSERVERMIG_NT_DB6 InternalColdKeyCheck:0
The CD KERNEL will not be copied.
INFO 2008-05-23 17:39:00 CDSERVERMIG_NT_DB6 InternalColdKeyCheck:0
The CD RDBMS will not be copied.
INFO 2008-05-23 17:39:00 CDSERVERMIG_NT_DB6 InternalColdKeyCheck:0
The CD EXPORT1 will not be copied.
ERROR 2008-05-24 22:33:29 GETDBSIZEKEYS_IND_IND ColdKeyCheck:0
Phase failed.
ERROR 2008-05-24 22:33:29 InstController Action:0
Step GETDBSIZEKEYS_IND_IND could not be performed.
ERROR 2008-05-24 22:33:30 Main
Installation failed.
ERROR 2008-05-24 22:33:30 Main
Installation aborted.
I checked the DBSIZE.TPL file as well it is there with full permissions in the following path
<DRIVE>\<EXPDIR>\DB\DB6\DBSIZE.TPL
Please reply me back
Thank you
Irshad Mohammed
What immediately comes to my eyes is the hostname "SAP" - accordign to the installation documentation neither and instance nor a hostname must be named "SAP"....
Markus
Similar Messages
-
Error during Heterogeneous System Copy - Phase 18 Import ABAP
Hello gurus,
I´m facing an error during the Target Installation in a Heterogeneous System Copy (Migration). The system SAP is a SAP ECC 6.0 SR3 (Unicode and Abap+Java).
Source server:
Operation System: Windows 2003 Server x64
Database: SQL Server 2008 SP01
Target server:
Operation System: Red Hat Enterprise Linux (RHEL) X64
Database: Oracle DB 10.2g (10.2.0.4)
I already did the all procedures in export database and all that looks fine!
At this point I´m running the system copy procedure through SAPInst on target server (RHEL / Oracle) but in phase 18 - Import ABAP the sapinst stops... (by the way in procedure bar, I can see "Import Monitor jobs: running 0, waiting 1, completed 0, failed 18, total 19")
I checked three log files (sapinst_dev.log ; sapinst.log ; SAPSDIC.log):
SAPSDIC.log:
/usr/sap/QAS/SYS/exe/run/R3load: START OF LOG: 20100820145140
/usr/sap/QAS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/QAS/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jan 23 2008 17:39:05
/usr/sap/QAS/SYS/exe/run/R3load -ctf I /software/export_preparation/ABAP/DATA/SAPSDIC.STR /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS/DDLORA.TPL SAPSDIC.TSK ORA -l SAPSDIC.log
(TPL) ERROR: unknown template variable "compress"
/usr/sap/QAS/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/QAS/SYS/exe/run/R3load: END OF LOG: 20100820145140Hi Volker,
> (TPL) ERROR: unknown template variable "compress"
> This message looks like the DDLORA.TPL contains stuff that should not belong there.
> Can you attach the DDLORA.TPL.
> There are some bugs with SMIGR_CREATE_DDL, but they are mostly not related to oracle.
prikey: AFTER_LOAD ORDER_BY_PKEY
seckey: AFTER_LOAD
cretab: CREATE TABLE &tab_name&
( /{ &fld_name& &fld_desc& /-, /} )
TABLESPACE &tablespace&
&compress&
&lob_cache&
STORAGE (INITIAL &init&
NEXT &next&
MINEXTENTS &minext&
MAXEXTENTS &maxext&
PCTINCREASE &pctinc& )
drptab: DROP TABLE &tab_name&
crepky: CREATE UNIQUE INDEX &pri_key&
ON &tab_name&
( &key_fld& /-, )
TABLESPACE &tablespace&
STORAGE (INITIAL &init&
NEXT &next&
MINEXTENTS &minext&
MAXEXTENTS &maxext&
PCTINCREASE &pctinc& )
NOLOGGING
COMPUTE STATISTICS ;
ALTER INDEX &pri_key& LOGGING
drppky: DROP INDEX &pri_key&
creind: CREATE &unique& INDEX &ind_name&
ON &tab_name&
( /{ &fld_name& /-, /} )
TABLESPACE &tablespace&
STORAGE (INITIAL &init&
NEXT &next&
MINEXTENTS &minext&
MAXEXTENTS &maxext&
PCTINCREASE &pctinc& )
NOLOGGING
COMPUTE STATISTICS ;
ALTER INDEX &ind_name& LOGGING
drpind: DROP INDEX &ind_name&
crevie: CREATE VIEW &view_name&
( /{ &fld_name& /-, /} )
AS &query&
drpvie: DROP VIEW &view_name&
trcdat: TRUNCATE TABLE &tab_name&
deldat: DELETE FROM &tab_name& &where&
negtab: LICHECK MLICHECK
negdat: LICHECK MLICHECK
negind: LICHECK0 MLICHECK0 LICHECK0 MLICHECK0
negvie:
negcpr:ARFCSSTATE ARFCSDATA ARFCRSTATE TRFCQDATA TRFCQIN TRFCQOUT TRFCQSTATE QRFCTRACE QRFCLOG
table storage parameters
loc: APPL0 PSAPSR3 0000
APPL1 PSAPSR3 0000
APPL2 PSAPSR3 0000
CLUST PSAPSR3 0000
DDIM PSAPSR3 0000
DFACT PSAPSR3 0000
DODS PSAPSR3 0000
POOL PSAPSR3 0000
SDIC PSAPSR3 0
SDOCU PSAPSR3 0000
SLDEF PSAPSR3700 0000
SLEXC PSAPSR3700 0000
SLOAD PSAPSR3 0000
SPROT PSAPSR3 0000
SSDEF PSAPSR3700 0000
SSEXC PSAPSR3700 0000
SSRC PSAPSR3 0000
TEMP PSAPSR3 0000
USER PSAPSR3USR 0000
USER1 PSAPSR3USR 0000
sto: 0 0000000016K 0000000040K 0000000001 2147483645
1 0000000016K 0000000160K 0000000001 2147483645
10 0000000016K 0000655360K 0000000001 2147483645
11 0000000016K 0001310720K 0000000001 2147483645
12 0000000016K 0002621440K 0000000001 2147483645
13 0000000016K 0005242880K 0000000001 2147483645
14 0000000016K 0010485760K 0000000001 2147483645
2 0000000016K 0000000640K 0000000001 2147483645
3 0000000016K 0000002560K 0000000001 2147483645
4 0000000016K 0000010240K 0000000001 2147483645
5 0000000016K 0000020480K 0000000001 2147483645
6 0000000016K 0000040960K 0000000001 2147483645
7 0000000016K 0000081920K 0000000001 2147483645
8 0000000016K 0000163840K 0000000001 2147483645
9 0000000016K 0000327680K 0000000001 2147483645
index storage parameters
loc: APPL0 PSAPSR3 0000
APPL1 PSAPSR3 0000
APPL2 PSAPSR3 0000
CLUST PSAPSR3 0000
DDIM PSAPSR3 0000
DFACT PSAPSR3 0000
DODS PSAPSR3 0000
POOL PSAPSR3 0000
SDIC PSAPSR3 0
SDOCU PSAPSR3 0000
SLDEF PSAPSR3700 0000
SLEXC PSAPSR3700 0000
SLOAD PSAPSR3 0000
SPROT PSAPSR3 0000
SSDEF PSAPSR3700 0000
SSEXC PSAPSR3700 0000
SSRC PSAPSR3 0000
TEMP PSAPSR3 0000
USER PSAPSR3USR 0000
USER1 PSAPSR3USR 0000
sto: 0 0000000016K 0000000040K 0000000001 2147483645
1 0000000016K 0000000080K 0000000001 2147483645
10 0000000016K 0000163840K 0000000001 2147483645
11 0000000016K 0000327680K 0000000001 2147483645
12 0000000016K 0000655360K 0000000001 2147483645
13 0000000016K 0001310720K 0000000001 2147483645
14 0000000016K 0002621440K 0000000001 2147483645
2 0000000016K 0000000160K 0000000001 2147483645
3 0000000016K 0000000640K 0000000001 2147483645
4 0000000016K 0000002560K 0000000001 2147483645
5 0000000016K 0000005120K 0000000001 2147483645
6 0000000016K 0000010240K 0000000001 2147483645
7 0000000016K 0000020480K 0000000001 2147483645
8 0000000016K 0000040960K 0000000001 2147483645
9 0000000016K 0000081920K 0000000001 2147483645 -
Symbolic link error when exporting during heterogeneous system copy
My enviroment is ECC6.0/Oracle 10.2.0.2/SUN Solaris 10 . I'm performing heterogeneous system copy to Oracle 10.2.0.2/AIX 6.1 enviroment.
I've succesfully exported & imported two systems ie DEV & Solutin Manager , but PRD system has an OS problem with symbolic links ie Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS
I want to export both ABAP & JAVA stack but only the java stack is getting picked.
Below is part of the resultng sapinst.log
Thanks
INFO 2011-09-05 10:44:30.573
Execute step verifyJavaHome of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
INFO[E] 2011-09-05 10:44:33.851
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:44:33.851
FSL-02061 Link /._ is invalid: Unable to link a link to itself.
INFO 2011-09-05 10:44:46.118
Execution of the command "/usr/j2sdk1.4.2_09/bin/java -classpath /tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Mon Sep 05 10:44:45 EAT 2011
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=/usr/j2sdk1.4.2_09/jre/lib/sparc
java.vm.version=1.4.2_09-b05
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=\:
java.vm.name=Java HotSpot(TM) Client VM
file.encoding.pkg=sun.io
user.country=US
sun.os.patch.level=unknown
java.vm.specification.name=Java Virtual Machine Specification
user.dir=/oracle/PRD/INSTDIR/sapinst_dir
java.runtime.version=1.4.2_09-b05
java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment
java.endorsed.dirs=/usr/j2sdk1.4.2_09/jre/lib/endorsed
os.arch=sparc
java.io.tmpdir=/var/tmp/
line.separator=\n
java.vm.specification.vendor=Sun Microsystems Inc.
os.name=SunOS
sun.java2d.fontpath=
java.library.path=/usr/j2sdk1.4.2_09/jre/lib/sparc/client\:/usr/j2sdk1.4.2_09/jre/lib/sparc\:/usr/j2sdk1.4.2_09/jre/../lib/sparc\:/tmp/sapinst_exe.29247.1315208256\:/usr/openwin/lib\:/usr/lib
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.FileSystemPreferencesFactory
os.version=5.10
user.home=/
user.timezone=Africa/Nairobi
java.awt.printerjob=sun.print.PSPrinterJob
file.encoding=ISO8859-1
java.specification.version=1.4
java.class.path=/tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar
user.name=root
java.vm.specification.version=1.0
java.home=/usr/j2sdk1.4.2_09/jre
sun.arch.data.model=32
user.language=en
java.specification.vendor=Sun Microsystems Inc.
java.vm.info=mixed mode
java.version=1.4.2_09
java.ext.dirs=/usr/j2sdk1.4.2_09/jre/lib/ext
sun.boot.class.path=/usr/j2sdk1.4.2_09/jre/lib/rt.jar\:/usr/j2sdk1.4.2_09/jre/lib/i18n.jar\:/usr/j2sdk1.4.2_09/jre/lib/sunrsasign.jar\:/usr/j2sdk1.4.2_09/jre/lib/jsse.jar\:/usr/j2sdk1.4.2_09/jre/lib/jce.jar\:/usr/j2sdk1.4.2_09/jre/lib/charsets.jar\:/usr/j2sdk1.4.2_09/jre/classes
java.vendor=Sun Microsystems Inc.
file.separator=/
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeBig
sun.cpu.endian=big
sun.cpu.isalist=sparcv9vis2 sparcv9vis sparcv9 sparcv8plusvis2 sparcv8plusvis sparcv8plus sparcv8 sparcv8-fsmuld sparcv7 sparc
INFO 2011-09-05 10:44:47.076
Execution of the command "/usr/j2sdk1.4.2_09/bin/java -classpath /tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar:/tmp/sapinst_exe.29247.1315208256/JAR/sapxmltoolkit.jar -d64 com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2011-09-05 10:44:47.572
Execute step verifyPolicy of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
INFO 2011-09-05 10:44:47.715
Execute step setNWOption of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
WARNING 2011-09-05 10:44:47.944
Could not determine a valid JAVA_HOME directory from the environment.
INFO 2011-09-05 10:44:48.86
Execute step assignUsersToSapinstGroup of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:48.890
Account sapinst already exists.
INFO 2011-09-05 10:44:48.894
Account prdadm already exists.
INFO 2011-09-05 10:44:48.917
Account oraprd already exists.
INFO 2011-09-05 10:44:49.73
Execute step useDatabaseMethod of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.217
Execute step setDatabaseMethodOra of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.341
Execute step setDatabaseMethodDB6 of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.480
Execute step mainExportParameters of component |NW_Export|ind|ind|ind|ind|0|0
INFO[E] 2011-09-05 10:44:52.251
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:44:52.252
FSL-02061 Link /._ is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.760
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/cntrl), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.761
FSL-02061 Link /oracle/PRD/cntrl is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.762
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.762
FSL-02061 Link /oracle/PRD/._ is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.763
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/sdubhibq), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.764
FSL-02061 Link /oracle/PRD/sdubhibq is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.765
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/sduccayx), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.765
FSL-02061 Link /oracle/PRD/sduccayx is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.766
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/inventory), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.767
FSL-02061 Link /oracle/PRD/inventory is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.768
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/OPatch), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.768
FSL-02061 Link /oracle/PRD/OPatch is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.769
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/assistants), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.770
FSL-02061 Link /oracle/PRD/assistants is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.771
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/bin), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.772
FSL-02061 Link /oracle/PRD/bin is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.773
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/clone), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.773
FSL-02061 Link /oracle/PRD/clone is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.774
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/crs), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.775
FSL-02061 Link /oracle/PRD/crs is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.776
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/css), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.777
FSL-02061 Link /oracle/PRD/css is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.778
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/ctx), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.778
FSL-02061 Link /oracle/PRD/ctx is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.779
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/dbs), line (346) in file (syuxclink.cpp).Hi,
In PRD system, u might have craeted many symbolic links in /oracle/PRD fileystem . This should be avoided. Symbolic link should not be created in /oracle/PRD ...
Please check why symbolic links are created and get help from System Operation team . Please becareful to unlink symbolic links that are created by non-SAP. Make sure to perform full offline backup .
Please get the help from Unix System Operation team. Also it does not makes any sense to increase value of Unix parameter for maximum symbolic links.
Regards
APR -
Heterogeneous system copy. Error in SMIGR_CREATE_DDL
Hello!
I perform a heterogeneous system copy of RHEL5/Oracle11/ERP6/0 > RHEL6/MaxDB/ERP6.0
I use the "System Copy Guide for SAP Systems Based on NW 7.0 SR3 ABAP + Java". At the stage "4.2 Generating DDL" statements is a problem. I'm doing "Call transaction SE38 and run the program SMIGR_CREATE_DDL."
But i get error:
Runtime Errors DATASET_NOT_OPEN
Exception CX_SY_FILE_OPEN_MODE
Date and Time 20.09.2011 12:16:01
Short text
File "/EXPORT_DDL/SQLFiles.LST" is not open.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_SMIGR_DDL==================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_FILE_OPEN_MODE', was not
caught in
procedure "WRITE_DDL_TO_FILE" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When accessing the file "/EXPORT_DDL/SQLFiles.LST", the system recognized that
this file is
not open. Therefore, the file cannot be accessed.
How to correct the error
Before the first access, the file must be opened using the ABAP language
element "OPEN DATASET '/EXPORT_DDL/SQLFiles.LST'" and after the last access,
it must be
closed using the language element "CLOSE DATASET '/EXPORT_DDL/SQLFiles.LST'".
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DATASET_NOT_OPEN" "CX_SY_FILE_OPEN_MODE"
"CL_SMIGR_DDL==================CP" or "CL_SMIGR_DDL==================CM003"
"WRITE_DDL_TO_FILE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
I forgot something to do?> File "/EXPORT_DDL/SQLFiles.LST" is not open.
Make sure the user <sid>adm is permitted to write to that directory.
Markus -
Heterogeneous system copy from MSSQL to Oracle
Dear Experts,
I have performed ABAP+JAVA system copy R3load based from Oracle to Oracle and MSSQL to MSSQL platform.
Homogeneous system copy many times.
But this is first time i am perfoming an Export from MSSQL source system with r3load Export method .....My Target system is havign Oracle 10.2.0.2 software installed along with installation prerequisites.
But while Importing the same MSSQL Export ...I am not getting any option for heterogeneous system copy.
I am running on ECC6.0 windows platform and i also have generated Migartion KEY.
But where should i put this key.
I have gone through system copy guide many times but unable to understand Exact options to follow to Migrate to Oracle target system. Appreciate if anyone can give me detail steps i need to carry on Target system
Best Regards,
AjitRMarkus,
Thanks for the help, i have done Export with mentioned way and this time DBSIZE.xml file got created under ORA directory ....i started installation at target system....It went smooth until phase Import java Dump Done. .....But during Post load activities It gave error...
When i tried connectivity to Oracle database it works fine and
R3trans -d gives below mentioned error....Looks like table does not exist....all ENV variables are also got set at target machine.....
Error as below
Now 'SAPSR3/<pwd>@TST' is connected (con_hdl 0, nls_hdl 0).
4 ETW000 389 0.171885
4 ETW000 [dev trc ,00000] Database NLS settings: AMERICAN_AMERICA.UTF8 23682 0.195567
4 ETW000 [dev trc ,00000] Database instance TST is running on CSSLDELL-3 with ORACLE version 10.2.0.2.0 since 20080522
4 ETW000 4056 0.199623
4 ETW000 [dev trc ,00000] Connection 0 opened (DBSL handle 0) 14523 0.214146
4 ETW000 [dblink ,01299] ***LOG BZA=>table SVERS does not exist on database [dblink#3 @ 1299]
4 ETW000 8145 0.222291
4 ETW000 [dev trc ,00000] NTAB: SELECT COMPCNT FROM DDNTT FAILED 1021 0.223312
4 ETW000 [dev trc ,00000] NTAB: SELECT VERSION FROM DDNTT FAILED 520 0.223832
4 ETW000 [dbntab.c ,00000] *** ERROR => NTAB: SELECT VERSION/DBASE FROM DDNTT FAILED
4 ETW000 505 0.224337
4 ETW000 [dbntab ,01273] ***LOG BZY=>unexpected return code 103 calling NTAB [dbntab#3 @ 12737]
Please help...Points rewarded anyways..... -
Possible migration(Heterogeneous system copy) combination
Dear all
Currently we're planning to do Heterogeneous system copy
from the following source(current system) and target.
Source : R/3 4.6C + Oracle 8.1.7 on AIX 4.3.3
Target : R/3 4.6C + Oracle 10.2 on Windows 2003
For the target system, i checked the PAM in Service Marketplace
and it seems that R/3 4.6C + Oracle 10.2 on Windows 2003 is supported.
But i'm not sure whether this source - target combination is possible
in Heterogeneous system copy.
To summarize, here are 2 questions.
1) Where can i find Heterogeneous system copy combination?
(OS/DB combination which supports Heterogeneous system copy in R/3 4.6C)
2) Is the above Source - Target combination is possible?
Best Regards.
Ahn> Source : R/3 4.6C + Oracle 8.1.7 on AIX 4.3.3
> Target : R/3 4.6C + Oracle 10.2 on Windows 2003
Yes - this is possible and supported. But keep in mind:
- you must have a certified migration consultant doing the migration. If you do it on your own, you'll loose support for problems during the migration and for the target system --> SAP will bill help (see http://service.sap.com/osdbmigration --> FAQ)
- 4.6c is out of general support; you may need to buy extended support to get the migration kit
Markus -
Downtime for Heterogeneous System Copy Export of Source DB2 LUW
Hello,
What is the downtime required for a heterogeneous system copy export of a source database on AIX with DB2 LUW? Here are the following details of the data itself:
DB size: 120 GB used of 240 GB.
Physical server: IBM Power5 quad-core 1.65GHz virtualized
RAM: 9.5GB> What is the downtime required for a heterogeneous system copy export of a source database on AIX with DB2 LUW? Here are the following details of the data itself:
I suggest you just "try it out" as a test run. It's quite impossible to give estimates based on database sizes. It's possible to migrate roughly 1 TB/hour with appropriate hardware, mostly your harddisks will be the bottleneck.
There are also a number of other factors like number of R3load processes, table splitting or not, parallel export/import etc.
I highly suggest to run the migration a few times before you do the "live" migration.
Markus -
Homogeneous/heterogeneous system copy
In the homogeneous/heterogeneous system copy guide, I'm told to delete all entries in the tables DBSTATHORA, DBSTAIHORA, DBSTAIORA and DBSTATTORA.
Why do I need to delete all the entries in these tables? What are the entries in these tables for? What happens if I don't delete the entries from these tables?Hi Jamal,
I believe you are talking about the tables DBSTATHORA, DBSTAIHORA,
DBSTATIORA, DBSTATTORA. These tables contain statistical
data (like performance) from the source system. Since that is of no use
in your new system you can delete it with the following command in
SQL*Plus as user sapr3 (or sap<sid> when using Basis >=610)
delete from DBSTATHORA;
Repeat this command for the other tables
or execute being in SQL> prompt
truncate <Tablename>
Hope this helps you to understand the pupose and how to delete them.
Regards
Sekhar -
Homogeneous and Heterogeneous System Copy
Hello Guru's
Greeting ! . . .
I wanted some help regarding Homogeneous and Heterogeneous System Copy.
It would be helpful if you can guide me for an Step by Step procedure for Homogeneous and Heterogeneous System copy. As i have to carry out both of the activity.
Homogeneous:- AIX5.3/Oracle10 to AIX5.3/Oracle10
Heterogeneous:- AIX5.3/Oracle10 to Windows2003/Oracle10
Thanks & Best Regards
AshishHello Ashish,
You can find the guides here in this location.
https://websmp203.sap-ag.de/systemcopy
If you have complete backup then you start you SAPInst on the system on which you want to have systemcopied.
Then when you are starting DB instance then instead of using the Export DVD you need provide the Database which is backed up. There are screens where it will ask you for editing SID you need to specify that during DB instance.
For further processes you can download the corressponding guide from above link.
Thanks & Regards
Vivek -
Import ABAP error in ECC6 system copy targert
Hi Experts,
I am istalling SAP Ecc 6 in System copy targrt, ABAP import fail in 2/87. I got the error Loading of 'SAPDFACT' import package: ERRORImport Monitor jobs.
My OS Windows 2003 64 bit and Oracle 10.2. Please find the log files belo. Please help me to solve this issue
:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325173244
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -ctf I H:\MVGK IDESBackup-march2010\ABAP\DATA\SAPDFACT.STR C:\Program Files\sapinst_instdir\ERP\LM\COPY\ORA\SYSTEM\CENTRAL\AS\DDLORA.TPL SAPDFACT.TSK ORA -l SAPDFACT.log
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job completed
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325173244
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325173244
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "AT220100325020343 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "KENKI "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "KENKI"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 15 Step 7)"
(DB) INFO: /BI0/E0RSTT_C01 created #20100325173245
(IMP) INFO: import of /BI0/E0RSTT_C01 completed (0 rows) #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~0 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~01 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~02 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~04 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~05 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~06 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~07 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~08 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~09 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~10 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~11 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~12 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~13 created #20100325173245
DbSl Trace: Error 1408 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-1408 occurred when executing SQL stmt (parse error offset=57)
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C01~P" ON "/BI0/E0RSTT_C01" ( "KEY_0RSTT_C01P" , "KEY_0RSTT_C01T" , "KEY_0RSTT_C01U" , "KEY_0RSTT_C011" , "KEY_0RSTT_C012" , "KEY_0RSTT_C013" , "KEY_0RSTT_C014" , "KEY_0RSTT_C015" , "KEY_0RSTT_C016" , "KEY_0RSTT_C017" , "KEY_0RSTT_C018" , "KEY_0RSTT_C019" , "KEY_0RSTT_C01A" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325173245
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325174158
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "AT220100325020343 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "KENKI "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "KENKI"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 15 Step 7)"
(DB) ERROR: DDL statement failed
(DROP INDEX "/BI0/E0RSTT_C01~P")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error 1408 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-1408 occurred when executing SQL stmt (parse error offset=57)
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C01~P" ON "/BI0/E0RSTT_C01" ( "KEY_0RSTT_C01P" , "KEY_0RSTT_C01T" , "KEY_0RSTT_C01U" , "KEY_0RSTT_C011" , "KEY_0RSTT_C012" , "KEY_0RSTT_C013" , "KEY_0RSTT_C014" , "KEY_0RSTT_C015" , "KEY_0RSTT_C016" , "KEY_0RSTT_C017" , "KEY_0RSTT_C018" , "KEY_0RSTT_C019" , "KEY_0RSTT_C01A" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325174158
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325180802
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325180808
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325182246
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325182251
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325183259
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325183304
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100326100904
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100326100910
Thanks in Advance
Jose HHi,
You can check the defined enviornment variable using command prompt and System properties.
Open Command Prompt and give "set" command. It will show you active environment variable.
You can also set missing environment variables in system properties.
Start -->Control Panel --> System
On Advanced Tab --> Environment Variables.
After logging to the database if it shows message "Connected to idle instance", that means your database is not started.
Please start the database using below SQL command.
Open Command Prompt
C:\Sqlplus / as sysdba
SQL>startup
Once it says "Database opened", retry SAP installation.
You can also check the database status in SQL prompt using below command:
SQL> select instance_name,status from v$instance;
It must show output like:
INSTANCE_NAME STATUS
<SID> OPEN
Regards.
Rajesh Narkhede -
Error during a system copy with HANA DB
Hello,
I´m doing a system copy in a SAP ERP 6.0 EHP7 with SAP HANA DB.
During a homogeneous system copy procedure with SWPM, it show me the following error during the phase Database refresh postload-activities.
I checked some log files:
-- sapinst.log:
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed:
===...could not load SSF library S:\usr\sap\\D00\exe\sapcrypto.dll .
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed: 543 wlikey_sign_for_installer: Couldn't load SAPSECULIB ("S:\usr\sap\\D00\exe\sapcrypto.dll") using function SsfSupInitEx (), rc = 10 (no library).
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed: 542 wlikey_sign_for_installer: At least one more attempt to load the SAPSECULIB will follow.
INFO 2014-08-24 16:14:01.234
Switched to user: ASCENDUMCE\ed1adm.
INFO 2014-08-24 16:14:01.343
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\saplikey.log.
INFO 2014-08-24 16:14:01.390
Switched to user: ASCENDUMCE\ed1adm.
INFO 2014-08-24 16:14:01.422
Output of S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX is written to the logfile saplikey.log.
WARNING 2014-08-24 16:14:01.640
Execution of the command "S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX" finished with return code 2. Output:
saplikey: failed to connect to the database.
ERROR 2014-08-24 16:14:01.640
CJS-30023 Process call 'S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX' exits with error code 2. For details see log file(s) saplikey.log, dev_slic.
ERROR 2014-08-24 16:14:01.703
FCO-00011 The step createTempLicense with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_Postload|ind|ind|ind|ind|postload|0|NW_Postload_DBRefresh_ABAP|ind|ind|ind|ind|abap|0|NW_Temp_License_ABAP|ind|ind|ind|ind|lic|0|createTempLicense was executed with status ERROR ( Last error reported by the step: Creating a license signature failed:
===...could not load SSF library S:\usr\sap\\D00\exe\sapcrypto.dll .).
INFO 2014-08-24 16:14:02.31
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\__instana_tmp.xml.
INFO 2014-08-24 16:14:02.734
Removed file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\instslana.xml.
INFO 2014-08-24 16:14:02.734
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\instslana.xml.
-- saplikey.log:
saplikey: failed to connect to the database.
-- dev_likey:
-> init()
STATEMENT_CACHE_SIZE = 1000
-> init()
-> loadClientRuntime()
Loading SQLDBC client runtime ...
SQLDBC Module : S:\usr\sap\ED1\hdbclient\libSQLDBCHDB.dll
SQLDBC Runtime : libSQLDBCHDB 1.00.80.00 Build 0391861-1510
SQLDBC client runtime is 1.00.80.00.0391861
-> getNewConnection()
<- getNewConnection(con_hdl=0)
-> checkEnvironment(con_hdl=0)
-> connect(con_info_p=0000000000000000)
Try to connect via secure store (DEFAULT) on connection 0 ...
*** ERROR => Connect to database failed, rc=1, rcSQL=10
[dbhdbsql.cpp 332]
SQLCODE : 10
SQLERRTEXT : invalid username or password:
-> SetSdbDbslCA(errcode=10)
-> freeConnection(con_hdl=0)
close all opened locators of connection 0
} DbSlHDBConnect(rc=99)
***LOG BY2=> sql error 10 performing CON [dblink 559]
***LOG BY0=> invalid username or password: [dblink 559]
*** ERROR => saplikey: failed to connect to the database. [saplikey.c 830]
release memory of the SIBU buffers
release memory of the STATEMENT CACHE
Can you help me please!? This is very urgent!
Thank you,
samid raifHello John Appleby,
I ran the R3trans -d and this is the output:
4 ETW000 r3trans version 6.24 (release 741 - 10.06.14 - 20:14:07).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 24.08.2014 - 20:22:19
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Sun Aug 24 20:22:19 2014 124 0.000124
4 ETW000 [ dev trc,00000] db_con_init called 103 0.000227
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): usage of ssfs switched off (rsdb/ssfs_connect=0)
4 ETW000 94 0.000321
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 44 0.000365
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 26 0.000391
4 ETW000 [ dev trc,00000] Loading DB library 'dbhdbslib.dll' ... 64 0.000455
4 ETW000 [ dev trc,00000] DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEEFE00000
4 ETW000 5889 0.006344
4 ETW000 [ dev trc,00000] using "S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\dbhdbslib.dll" 35 0.006379
4 ETW000 [ dev trc,00000] Library 'dbhdbslib.dll' loaded 36 0.006415
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library dbhdbslib.dll 52 0.006467
4 ETW000 [ dev trc,00000] Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.43) 111 0.006578
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library dbhdbslib.dll 39 0.006617
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library dbhdbslib.dll 63 0.006680
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 81 0.006761
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000) 40 0.006801
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 29 0.006830
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000221F280) 34 0.006864
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 29 0.006893
4 ETW000 [ dev trc,00000] New connection 0 created 25 0.006918
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 63 0.006981
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141FF5E40) 49 0.007030
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 30 0.007060
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 31 0.007091
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 42 0.007133
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 28 0.007161
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 124 0.007285
4 ETW000 [ dev trc,00000] { DbSlHDBConnect(con_info_p=0000000000000000) 61 0.007346
4 ETW000 [ dev trc,00000] DBHDBSLIB : version 741.10, patch 0.043 (Make PL 0.43) 65 0.007411
4 ETW000 [ dev trc,00000] HDB shared library (dbhdbslib) patchlevels (last 10) 37 0.007448
4 ETW000 [ dev trc,00000] (0.043) R3szchk with partitioned tables (note 2040561) 32 0.007480
4 ETW000 [ dev trc,00000] (0.031) New DBCON syntax for HANA (note 1983389) 50 0.007530
4 ETW000 [ dev trc,00000] (0.028) Bulk insert stop on duplicate, dbsl returncode corrected (note 1996982)
4 ETW000 51 0.007581
4 ETW000 [ dev trc,00000] (0.027) Set DBAREQ class (note 1991383) 35 0.007616
4 ETW000 [ dev trc,00000] (0.022) Get database version via dbsl call (note 1976918) 36 0.007652
4 ETW000 [ dev trc,00000] (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
4 ETW000 53 0.007705
4 ETW000 [ dev trc,00000] (0.020) SQL DDL with data aging (note 1897636) 35 0.007740
4 ETW000 [ dev trc,00000] (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
4 ETW000 52 0.007792
4 ETW000 [ dev trc,00000] (0.014) Tablesize calculation for HANA optimized (note 1952609) 36 0.007828
4 ETW000 [ dev trc,00000] (0.014) Native SQL UPSERT with DataAging (note 1897636) 32 0.007860
4 ETW000 [ dev trc,00000] 22 0.007882
4 ETW000 [ dev trc,00000] -> init() 33 0.007915
4 ETW000 [ dev trc,00000] STATEMENT_CACHE_SIZE = 1000 212 0.008127
4 ETW000 [ dev trc,00000] -> init() 615 0.008742
4 ETW000 [ dev trc,00000] -> loadClientRuntime() 46 0.008788
4 ETW000 [ dev trc,00000] Loading SQLDBC client runtime ... 31 0.008819
4 ETW000 [ dev trc,00000] SQLDBC Module : S:\usr\sap\ED1\hdbclient\libSQLDBCHDB.dll 1327 0.010146
4 ETW000 [ dev trc,00000] SQLDBC Runtime : libSQLDBCHDB 1.00.80.00 Build 0391861-1510 84 0.010230
4 ETW000 [ dev trc,00000] SQLDBC client runtime is 1.00.80.00.0391861 50 0.010280
4 ETW000 [ dev trc,00000] -> getNewConnection() 37 0.010317
4 ETW000 [ dev trc,00000] <- getNewConnection(con_hdl=0) 100 0.010417
4 ETW000 [ dev trc,00000] -> checkEnvironment(con_hdl=0) 53 0.010470
4 ETW000 [ dev trc,00000] -> connect(con_info_p=0000000000000000) 42 0.010512
4 ETW000 [ dev trc,00000] Try to connect via secure store (DEFAULT) on connection 0 ... 86 0.010598
4 ETW000 [dbhdbsql.cpp,00000] *** ERROR => Connect to database failed, rc=1, rcSQL=10 11122 0.021720
4 ETW000 [ dev trc,00000] SQLCODE : 10 68 0.021788
4 ETW000 [ dev trc,00000] SQLERRTEXT : invalid username or password: 40 0.021828
4 ETW000 [ dev trc,00000] -> SetSdbDbslCA(errcode=10) 41 0.021869
4 ETW000 [ dev trc,00000] -> freeConnection(con_hdl=0) 43 0.021912
4 ETW000 [ dev trc,00000] close all opened locators of connection 0 60 0.021972
4 ETW000 [ dev trc,00000] } DbSlHDBConnect(rc=99) 65 0.022037
4 ETW000 [ dblink ,00000] ***LOG BY2=>sql error 10 performing CON 68 0.022105
4 ETW000 [ dblink ,00000] ***LOG BY0=>invalid username or password: 35 0.022140
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=41,arg_p=0000000140541C48) 107 0.022247
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 79 0.022326
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002215998) 38 0.022364
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 28 0.022392
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002215990) 33 0.022425
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 43 0.022468
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=13,arg_p=00000000022159B0) 35 0.022503
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 27 0.022530
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=52,arg_p=0000000002215A00) 33 0.022563
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 28 0.022591
2EETW169 no connect possible: "DBMS = HDB --- SERVER = '' PORT = ''"
4 ETW000 [ dev trc,00000] release memory of the SIBU buffers 2900 0.025491
4 ETW000 [ dev trc,00000] release memory of the STATEMENT CACHE 91 0.025582 -
Error during sybase system copy EHP7 on linux
Hi Supports,
I am using sybase database on linux.on this system i have already TOW sap system running. now i want to create new SID with my production database backup. backup is .dmp which is sybase backup EHP7.
I planed system copy for this activity but i stuck on step "setup database server software" with some error.
i am copying last lines of my sapinst_dev.log files here
and also refer the attached screen for exact error..
kindly waiting for your warm help.
ibssrv02:/tmp/sapinst_instdir/BS2013/BS2013/ERP607/SYB/SYB/COPY/SYB/SYSTEM/STD/AS-ABAP # tail -100 sapinst_dev.log
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file /tmp/sapinst_instdir/BS2013/BS2013/ERP607/SYB/SYB/COPY/SYB/SYSTEM/STD/AS-ABAP/SYBASE_SAP.lic.
TRACE 2014-03-12 15:45:53.981
syb_install_ase_software: sybase installer rc 255
ERROR 2014-03-12 15:45:53.981 [iaxxinscbk.cpp:224]
CJS-00030 Assertion failed: Unable to install the database software. Refer to trace file sapinst_dev.log for further information.
TRACE 2014-03-12 15:45:53.982 [EJSController.cpp:351]
EJS_ControllerImpl::getExtension(EJS::Exception)
unqualified name is Exception
TRACE 2014-03-12 15:45:53.982 [JSExtension.hpp:128]
JSExceptionHandler::setJSException()
Member function 'Installer.abortInstallation()' has thrown ESAPinstException. Converting to JavaScript exception EJS::Exception.
TRACE 2014-03-12 15:45:53.982
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException
ERROR 2014-03-12 15:45:53.983
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in module call: .
TRACE 2014-03-12 15:45:53.983 [JSExtension.hpp:879]
CallFunctionBase::call()
Member function 'Installer.invokeModuleCall() has thrown unknown exception. Rethrowing.
TRACE 2014-03-12 15:45:54.211 [syuxctask.cpp:237]
CChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 5807
TRACE 2014-03-12 15:45:54.243 [syuxctask.cpp:600]
CUnixProcessManager::sap_waitpid(pid_t pid, int * pStatus, int options)
lib=syslib module=syslib
Child process 5807 returned 0
TRACE 2014-03-12 15:45:54.278 [syuxctask.cpp:237]
CChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 5808
TRACE 2014-03-12 15:45:54.309 [syuxctask.cpp:600]
CUnixProcessManager::sap_waitpid(pid_t pid, int * pStatus, int options)
lib=syslib module=syslib
Child process 5808 returned 0
ERROR 2014-03-12 15:45:54.318 [sixxcstepexecute.cpp:901]
FCO-00011 The step syb_step_install_database_software with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_SYB_DB|ind|ind|ind|ind|SYB_DB_CONTEXT|0|syb_step_install_database_software was executed with status ERROR ( Last error reported by the step: Assertion failed: Unable to install the database software. Refer to trace file sapinst_dev.log for further information.).
TRACE 2014-03-12 15:45:54.363 [kdxxctaco.cpp:100]
CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2014-03-12 15:45:55.836 [kdxxctaco.cpp:129]
CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
after creating out stream for /tmp/sapinst_instdir/BS2013/BS2013/ERP607/SYB/SYB/COPY/SYB/SYSTEM/STD/AS-ABAP/statistic.xml
TRACE 2014-03-12 15:45:55.901 [kdxxctaco.cpp:163]
CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO 2014-03-12 15:45:55.911 [syuxcpath.cpp:447]
CSyPath::createFile() lib=syslib module=syslib
Creating file /tmp/sapinst_instdir/BS2013/BS2013/ERP607/SYB/SYB/COPY/SYB/SYSTEM/STD/AS-ABAP/__instana_tmp.xml.
TRACE 2014-03-12 15:45:55.927 [syuxctask.cpp:237]
CChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 5809
TRACE 2014-03-12 15:45:55.957 [syuxctask.cpp:600]
CUnixProcessManager::sap_waitpid(pid_t pid, int * pStatus, int options)
lib=syslib module=syslib
Child process 5809 returned 0
TRACE 2014-03-12 15:45:55.992 [syuxctask.cpp:237]
CChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 5810
TRACE 2014-03-12 15:45:56.24 [syuxctask.cpp:600]
CUnixProcessManager::sap_waitpid(pid_t pid, int * pStatus, int options)
lib=syslib module=syslib
Child process 5810 returned 0
TRACE 2014-03-12 15:45:59.600
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2014-03-12 15:46:09.284 [iaxxgenimp.cpp:660]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option <i>SAP Business Suite 7i 2013 > EHP7 for SAP ERP 6.0 ABAP > SAP Sybase ASE > System Copy > Target System > Standard System > Based on AS ABAP > Standard System( Last error reported by the step: Assertion failed: Unable to install the database software. Refer to trace file sapinst_dev.log for further information.)</i>. You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>Log Files</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to <code>/tmp/sapinst_instdir/BS2013/BS2013/ERP607/SYB/SYB/COPY/SYB/SYSTEM/STD/AS-ABAP/</code>. </p> </body></html>
TRACE 2014-03-12 15:46:09.290 [iaxxgenimp.cpp:1137]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUIHi Deepak,
I have seen relevant sap note.do you help me how i can see cache memory??
because my other SID sybase GUI is not opening due to The variable $SYBROOT is not set to a valid directory whicch is on same zone(system).
Is this matter if environmental variable not set even though my xclock is working??
thnks for support,
Aziz. -
Error during Homogenous System copy of ABAP+JAVA stack
Hi All,
I'm trying to do a homogeneous system copy of an XI system NW04s on Windows 2k3 and Oracle database to another windows 2k3 machine. SCS and Database went on fine but during CI installation on the target system I'm stuck at "Run ABAP Reports" phase.
I'm getting an error:
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
runRADDBDIF was executed with status ERROR
The ABAP stack is however up and when I login to 000 client using DDIC user and try to execute the report RADDBDIF, I get a runtime error RAISE_EXCEPTION with Exception condition "WRITE_FAILED" raised.
A RAISE statement in the program "SAPLSUGI" raised the exception condition "WRITE_FAILED".
If anyone has encountered similar problem, kindly help me.
Regards,
SameerHi Juan,
I've already checked dev_disp and dev_ms but didn't find any errors. However, I got some errors in dev_w0. I'm pasting the same for your reference.
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Jan 07 18:45:15 2008
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno 04
M sid COP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2148
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2148) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Jan 07 18:45:16 2008
M DpShMCreate: sizeof(wp_adm) 10056 (1436)
M DpShMCreate: sizeof(tm_adm) 4232256 (21056)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1536)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05EC0040, size: 4883696)
M DpShMCreate: allocated sys_adm at 05EC0040
M DpShMCreate: allocated wp_adm at 05EC2090
M DpShMCreate: allocated tm_adm_list at 05EC47D8
M DpShMCreate: allocated tm_adm at 05EC4808
M DpShMCreate: allocated wp_ca_adm at 062CDC48
M DpShMCreate: allocated appc_ca_adm at 062D3A08
M DpShMCreate: allocated comm_adm at 062D5948
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06356808
M DpShMCreate: allocated gw_adm at 06356848
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06356878
M DpShMCreate: allocated wall_adm at 06356880
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host hydhtc24738
M calling db_connect ...
C Prepending F:\usr\sap\COP\DVEBMGS04\exe to Path.
C
C Mon Jan 07 18:45:18 2008
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0649D5C8 064A2B64 064A23EC
C Attaching to DB Server COP (con_hdl=0,svchp=064A2338,srvhp=064B3F34)
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now '/@COP' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=064A2338,usrhp=064FFA98)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0649D5C8 064A2B64 064A23EC
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now 'SAPSR3/<pwd>@COP' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance COP is running on HYDHTC24738 with ORACLE version 10.2.0.1.0 since JAN 07, 2008, 15:34:24
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080107 184516 HYDHTC24738
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Mon Jan 07 18:45:22 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0AB50040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AF90040, size: 32768000)
M SHM_ROLL_ADM (addr: 0CEE0040, size: 615040)
M SHM_PAGING_ADM (addr: 0CF80040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0D010040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0D0A0040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 7, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10CD00C8, size: 30000000, end: 1296C448)
B dbtbxbuf: Buffer TABLP (addr: 129700C8, size: 10240000, end: 133340C8)
B dbexpbuf: Buffer EIBUF (addr: 133400D0, size: 4194304, end: 137400D0)
B dbexpbuf: Buffer ESM (addr: 137500D0, size: 4194304, end: 13B500D0)
B dbexpbuf: Buffer CUA (addr: 13B600D0, size: 3072000, end: 13E4E0D0)
B dbexpbuf: Buffer OTR (addr: 13E500D0, size: 4194304, end: 142500D0)
M
M Mon Jan 07 18:45:23 2008
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Mon Jan 07 18:45:26 2008
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1965E820
S
S Mon Jan 07 18:45:27 2008
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D8C00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D8C02B0
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2236 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 4888kb, dir_size: 4856kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=57A1C000 leng=20955136 end=58E18000)
A >> Shm MMADM area (addr=57E91D98 leng=126176 end=57EB0A78)
A >> Shm MMDAT area (addr=57EB1000 leng=16150528 end=58E18000)
A RFC Destination> destination hydhtc24738_COP_04 host hydhtc24738 system COP systnr 4 (hydhtc24738_COP_04)
A RFC Options> H=hydhtc24738,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 7406 bytes at 0FFB0040
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\COP\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\COP\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Mon Jan 07 18:45:28 2008
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.111.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [14]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume hydhtc24738_COP_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >hydhtc24738_COP_04 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 07.01.2008 18:45:27 1199711727 / 1692
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 07.01.2008 18:45:28 1199711728 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 07.01.2008 18:45:28 1199711728 / 1
E Status: STATUS_OK
E -
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <hydhtc24738_COP_04 >
L BtcSysStartRaise: End
S
S Mon Jan 07 18:45:36 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05E90040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05E907A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05E907E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05E907EC
S
S Mon Jan 07 18:45:44 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
B
B Mon Jan 07 18:47:27 2008
B dbmyclu : info : my major identification is 3244494858, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is DCBD22E36FC346F1BF890002E339BE1E.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.
A
A Mon Jan 07 18:47:55 2008
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Mon Jan 07 18:48:02 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A
A Mon Jan 07 18:48:03 2008
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A
A Mon Jan 07 18:48:04 2008
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Jan 07 18:48:04 2008
A
A ABAP Program SAPLSUGI .
A Source LSUGIU08 Line 77.
A Error Code RAISE_EXCEPTION.
A Module $Id: //bas/700_REL/src/krn/runt/abfunc.c#10 $ SAP.
A Function ab_jfune Line 2561.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Exception condition "WRITE_FAILED" raised..
A
S
S Mon Jan 07 18:53:35 2008
S found spool memory service RSPO-ACTIONS at 1D8C9978
B
B Mon Jan 07 20:31:35 2008
B table logging switched off for all clients
Regards,
Sameer -
Java error : NullPointerException while system copy
Hi All,
system: windowsNT 2003 with SQL 2005
error while heterogeneous backup of system (CRM system ABAP + Java)
SAPinit_dev.log
SEVERE: Error during export of EP_ATTR_HEADERS
Sep 29, 2010 7:22:32 PM com.sap.inst.jload.Jload logStackTrace
SEVERE: java.lang.NullPointerException
at com.sap.sql.jdbc.mss.MssSQLExceptionAnalyzer.getCategory(MssSQLExceptionAnalyzer.java:112)
at com.sap.sql.services.core.CoreServices.isDuplicateKeyException(CoreServices.java:133)
at com.sap.sql.jdbc.direct.DirectPreparedStatement.processSQLException(DirectPreparedStatement.java:1189)
at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:285)
at com.sap.sql.jdbc.common.CommonPreparedStatement.executeQuery(CommonPreparedStatement.java:185)
at com.sap.inst.jload.db.DBTable.unload(DBTable.java:192)
at com.sap.inst.jload.Jload.dbExport(Jload.java:179)
at com.sap.inst.jload.Jload.executeJob(Jload.java:395)
at com.sap.inst.jload.Jload.main(Jload.java:621)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81
Reply soon
jattxxxHi Jattxxx,
Which JDBC driver are you using?
There was a similiar problem when using the Microsoft SQL Server 2005 Driver for JDBC version 1.1 or an older version 1.2. Therefore, if you're using the MSSQL 2005 JDBC driver, I would recommend to replace it by a newer one of version 1.2 (*).
Best regards,
Guenther
The file "Microsoft SQL Server 2005 Driver for JDBC version 1.2" can be downloaded from:
http://service.sap.com/swcenter-3pmain
-> MS SQL Server -> JDBC Drivers and Tools. -
Homogeneous or heterogeneous system copy?
Hello Gurus,
i want to make a system copy but i don't know if it is an homogeneous or an heterogeneous.
I use SAP 4.7 ext with win 2003 and oracle 9.2.0.x and want upgrade to SAP 4.7 with win 2003 an oracle 11.2. Besides i want to do a unicode conversation.
What system copy is it when I only upgrade the database? Homegeneous or heterogeneous?#
Please help.
Thank youIt is homogeneous till then you did not change your OS or Database for migration. You are just upgrading the database so it will be Homogeneous.
Regards,
Subhash
Maybe you are looking for
-
I need help changing a drop down menu on a template
Hi there ive been using dreamwearver on and of for a few years now and just about get by, ive just bought a web site template and although ive managed to ajust most things, the template had a drop down menu using CSS currently on the "about us" opt
-
Start/End Date parameters that check day of week and using to set default values.
Hi, I've got a report that presents data between a start and an end date. I want it to check if it's a monday and present data from the previous week, otherwise present data from this week. For the "Default" value of parameter @startdate, I've got th
-
I have a problem like this: I have a form with 2 text fields: Text1, Text2. If focusing on Text1 and pass focus-event to Text2, a Message_Box will show to confirm: "Do you want to change focusing from Text1 to Text2 (Y/N)?". If you choose Yes then fo
-
LR3 does not show source from CF card reader
I am new to LR3 and this is driving me crazy. I do not see the source for pics to import into LR3 from a CF card reader. CF card was formatted in camera prior to exposure. Does it matter if card reader is first plugged into Mac (OS X Lion) before tur
-
I am working in LAN environment.Database is on Main Server.If somebody gonna delete or update in the database, I want to know the terminal/machine no in my database trigger.