Error in Informatica while running Customized Workflow - LM_36488

Hi,
I am working on Customization to add a new attribute to an existing dimension table in the Oracle Business Analytics data warehouse.I am using Informatica 8.6.1.
I am copying the Standard Mapping and workflow from the SDE_ORA11510_Adapter and SILOS Folder to a Custom folder and when I try to run the Workflow after validation in Informatica , I get the below error in the Workflow:
Severity     Timestamp     Node     Thread     Message Code     Message
ERROR     8/9/2010 7:47:47 AM     node01_testdb     1419905376     VAR_27086     Cannot find specified parameter file [u04/app/Informatica/PowerCenter8.6.1/server/infa_shared/SrcFiles/SDE_ORA11510_Adaptor.SDE_ORA_InventoryProductDimension.txt] for [session [SDE_ORA_InventoryProductDimension.SDE_ORA_InventoryProductDimension_Temporary]].
Severity     Timestamp     Node     Thread     Message Code     Message
ERROR     8/9/2010 7:47:47 AM     node01_testdb     1419905376     VAR_27086     Cannot find specified parameter file [u04/app/Informatica/PowerCenter8.6.1/server/infa_shared/SrcFiles/SDE_ORA11510_Adaptor.SDE_ORA_InventoryProductDimension.txt] for [session [SDE_ORA_InventoryProductDimension.SDE_ORA_InventoryProductDimension_Temporary]].
I checked the SrcFiles folder and the parameter file is available.
Please let me know if any configuration needs to be done or I am missing out some step?
Thanks,
Timothy

Hi,
I am facing similar kind of error.
I have set up the new OBI applications environment with Informatica 8.6.1. I have started the repository and integration service. I am able to run the customized mapping successfully. But when I try to run the vanilla mapping, it throws an error.
ERROR : VAR_27086 : (221230|7712) Cannot find specified parameter file [b2b/b2binf/server/infa_shared/SrcFiles/SDE_SBL_Vert_78_Adaptor.SIL_CopyRunTableToOLTP.txt] for [session [SIL_CopyRunTableToOLTP.SIL_CopyRunTableToOLTP]].
What I observed is there is no such file SDE_SBL_Vert_78_Adaptor.SIL_CopyRunTableToOLTP.txt in the src file directory. Do I get this parameter file with the installation? I have copied all the src files that were generated by the OBI apps installation into the src file directory but it did not have this file.
This is the case for all vanilla mappings.
Please let me know where can I get these parameter files.
Thanks,
Phani.

Similar Messages

Error while running custom BI report in R12.1.1

Hi All,
We are encountering below error while running custom BI report in R12.1.1...
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00001: started report
REP-1401: '': Fatal PL/SQL error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Fri Jun 24 16:47:30 2011
Please let us know how to fix this error.
Thanks
Praveen

Hi Praveen,
Seems the issue is with the rdf. Check whether all the parameters are passed correctly.
REP-1401: '': Fatal PL/SQL error occurred.

Am facing this error sqlcode :-6502 while running sql code in plsql block

Am facing this error sqlcode :-6502 while running sql code in plsql block.
am using query :
SELECT SUBSTR('123456DE789KL|987654321|B',1,INSTR('123456DE789KL|987654321|B','|')-1) FROM DUAL;
CAN any body tell me why.

BD_Fayez wrote:
I've tried the following, but don't get any error.As I mentioned, most likely variable is too short:
SQL> declare
2 strSub varchar2(2);
3 begin
4 SELECT SUBSTR('123456DE789KL|987654321|B',1,INSTR('123456DE789KL|987654321|B','|')-1) into strSub FROM DUAL;
5 dbms_output.put_line(strSub);
6 end;
7 /
declare
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at line 4
SQL> SY.

"A critical error has occurred while running the virtual machine and the machine execution has been stopped"

I have the following error:
"A critical error has occurred while running the virtual machine and the machine execution has been stopped"
When I am installing grid clusterware and when is copying files from one node to other I received that virtualbox error and is stop working.
Can somebody give me any hint how to solve it ?
Thank you
Eugen

I think that is not a Clusterware issue, The clusterware installation may generating a high load on your machine and Virtual Box is not supporting.
Check vbox.log file to identify root cause.

Error while running Customer Interest Report

Hello All,
I am configuering Interest on Customer arrears/balance & I am getting an error "NO TIME-DEPENDENT CONDITIONS FOR INDICATOR EF" while running FINT. I have checked all the threads but there is no such query exept one. Please guide me to solve this. Below is the copy of steps i am follwing for Interest Configueration:
1) Created Balance Interest Calculation Type EF.
2) Maintained General conditions for Interest Scale, Interest Calc Freq=1, Calender typ=g, Flagged Interest rates depend on total amt, given the number range for forms and flagged Balance plus Int.
3) Created Reference Int Rates.
4) Time Dependent Terms = 1st = EFGHARR, INR, 01012011, 1, Credit Interest:arrears interest calc., 0, Ref. Interest rate - EFGH. 2nd = EFGHBAL, INR, 01012011, 1, Credit Interest:balance interest calc., 0, Ref. Interest rage - EFGH.
5) Interest values. Reference - EFGH, valid-01012011, rate 5
6) OBV1 = B.Transaction - 1000, Acct. Symbol - 0001.
7) OBV3 = B. Transaction - 1000, Acct. Symbol - 0001.
8) Have assigned the form F_D_INT_SCALE_00 and created the number range.
Please note that i have created a GL account under INCOME which i have assigned in OBV1 & OBV3. Do I need to Interest Indicator in my customer recon account?
Please advice,
Thanks,
Kamal

if you want to generate interest on customer overdue line item you have to maintain Debit Interest: arrears Interest calc. Now you have maintained only Credit Interest: arrears Interest calc it will calculate the amount paid by the customer in excess of the actual amount that means the amount paid to the customers, i hope you understand

"java.lang.NumberFormatException" error while running custom BIP report

Hi,
When we are running a custom BIP report, it is completing in ERROR at times and running Succesfully at times for the same set of parameters.
Please let us know the solution if any one faced similar kind of an issue.
Below is the log file when the program errors out:
Calling XDO Data Engine...
java.lang.NumberFormatException: For input string: "000</UIN><ACC>726030</ACC><ACC_N>Express Services - Mail and Courier</ACC_N><S_ACC_N>00000</S_ACC_N><S_ACC_NA>Default - Sub Account</S_ACC_NA><I_CO>000</I_CO><PROD>Term Life - GBL - Allocation Ind NQ NP BCLIC Direct</PROD><BAL>1126.47</BAL><A_L>9</A_L><P_ACC>GEN_EXP_POSTAGE_S</P_ACC><S_F>N</S_F><R_ID>3123</R_ID>ACC_N><S_ACC_NA>Default - Sub Account</S_ACC_NA><I_CO>000</I_CO><PROD>Annuities Dep Type - Allocation Ind NQ NP OCB</PROD><BAL>13.5</BAL><A_L>9</A_L><P_ACC>GEN_EXP_POSTAGE_S</P_ACC><S_F>N</S_F><R_ID>3124</R_ID>N><ACC>MGMT_ACCT_HIERARCHY</ACC><ACC_N/><S_ACC_N/><S_ACC_NA/><I_CO/><PROD>FPDA - Other Ind Q NP BCLIC Ind Agt</PROD><BAL>176028.27</BAL><A_L>0</A_L><P_ACC/><S_F>Y</S_F><R_ID>36</R_ID>_T>>726030</ACC><ACC_N>Express Services - Mail and Courier</ACC_N><S_ACC_N>00000</S_ACC_N><S_ACC_NA>Default - Sub Account</S_ACC_NA><I_CO>000</I_CO><PROD>Annuities Other - Allocation Ind NQ NP NON OCB</PROD><BAL>2.58</BAL><A_L>9</A_L><P_ACC>GEN_EXP_POSTAGE_S</P_ACC><S_F>N</S_F><R_ID>3127</R_ID>R_ID>3128</R_ID>S_F><R_ID>41</R_ID>ther - Allocation Ind NQ NP BCLIC Career</PROD><BAL>267.97</BAL><A_L>9</A_L><P_ACC>GEN_EXP_POSTAGE_S</P_ACC><S_F>N</S_F><R_ID>3131</R_ID>areer</PROD><BAL>53.31</BAL><A_L>9</A_L><P_ACC>GEN_EXP_POSTAGE_S</P_ACC><S_F>N</S_F><R_ID>3132</R_ID>o CV Ind NQ NP BCLIC Direct</PROD><BAL>-29963</BAL><A_L>0</A_L><P_ACC/><S_F>Y</S_F><R_ID>46</R_ID>N>Telecommunication/Online Services</ACC_N><S_ACC_N>00000</S_ACC_N><S_ACC_NA>Default - Sub Account</S_ACC_NA><I_CO>000</I_CO><PROD>Term Life - Other - Allocation Grp NQ NP BCLIC Career</PROD><BAL>.06</BAL><A_L>9</A_L><P_ACC>GEN_EXP_POSTAGE_S</P_ACC><S_F>N</S_F><R_ID>3135</R_ID>_ACC_NA><I_CO>000</I_CO><PROD>LTC - Allocation Ind Guar Ren NON OCB</PROD><BAL>22.05</BAL><A_L>9</A_L><P_ACC>GEN_EXP_POSTAGE_S</P_ACC><S_F>N</S_F><R_ID>3136</R_ID>ROD>Term Life - Other - Allocation Grp NQ NP BCLIC Career</PROD><BAL>1118.96</BAL><A_L>0</A_L><P_ACC/><S_F>Y</S_F><R_ID>51</R_ID>S_ACC_N>00000</S_ACC_N><S_ACC_NA>Default - Sub Account</S_ACC_NA><I_CO>000</I_CO><PROD>Annuities Other - Allocat"
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:59)
     at java.lang.Integer.parseInt(Integer.java:467)
     at java.lang.Integer.parseInt(Integer.java:508)
     at oracle.apps.xdo.dataengine.ScalableStringList.get(ScalableStringList.java:162)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeRowSetListToStream(XMLPGEN.java:1277)
     at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:559)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:308)
     at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:273)
     at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:215)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:254)
     at oracle.apps.xdo.dataengine.DataProcessor.processDataStructre(DataProcessor.java:390)
     at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:355)
     at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:334)
     at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:294)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Oracle error 6502: java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "APPS.FND_CONCURRENT", line 1331
ORA-06512: at line 1
has been detected in FND_CONCURRENT.SET_INTERIM_STATUS.+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
9662
------------- 1) PUBLISH -------------
Beginning post-processing of request 970405 on node UXEBSCMP01 at 29-SEP-2012 21:02:30.
Post-processing of request 970405 failed at 29-SEP-2012 21:02:30 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 29-SEP-2012 21:02:30
Thanks.

If you use parameters you can try playing with them to narrow down the values on which the error occurs. Anyway, need to get the output in XML (without template) and review it. If it's not too huge, post the XML here.

Error in Jdeveloper while running a project on weblogic server.

Hi ,
I am receiving below error while running a project in Weblogic. I am using Jeveloper 11.1.1.2.0
*** Using port 7101 ***
"C:\Documents and Settings\nlatif\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
The system cannot find the path specified.
The JRE was not found in directory D:\OracleJeveloper\Middleware\jdk160_14_R27.6.5-32. (JAVA_HOME)
Please edit your environment and set the JAVA_HOME
variable to point to the root directory of your Java installation.
Press any key to continue . . .
where as I can run the same project in other machine on Jdeveloper with out this error.
Thanks & regards,
Noman

Noman,
have you checked that the folder D:\OracleJeveloper\Middleware\jdk160_14_R27.6.5-32 contains the jre?
Timo

Error during scheduling while running Run order sequencing in PPR

Hello Experts,
An error saying 'Error during scheduling' is logged while running Run order sequencing in Production Planning Run and the job is failed.
Checked the capacity of the resource but seems ok.
The below long text is displayed next to the error message.
Error during scheduling
Message no. /SAPAPO/OM043
Diagnosis
The system could not schedule an order, operation or activity.
This could have the following causes:
The resource does not have any free working time or capacity.
If you have set planning direction backwards in the strategy profile:
There is not enough working time or capacity available for scheduling between now and the scheduling date.
If you have set planning direction forwards in the strategy profile:
There is not enough working time or capacity available for scheduling between the scheduling date and the end of the planning area.
If you plan characteristics-dependently:
You have assigned characteristics to operations of the order that do not agree with characteristics of the resources on which the operations are to be processed.
The system cannot find any suitable characteristics on the resources and so it cannot schedule.
Procedure
Depending on which of the above reasons is the cause, change the following settings:
Change the working times and capacities of the resources.
Set the planning mode "infinite planning" in the strategy profile.
Activate the planning direction forwards or backwards and reverse in the strategy profile.
Change the characteristics that you have assigned to the resource.
Can anyone let me know what else need to check to avoid the error.

Dear Maddy,
The function "Reschedule" follows an all-or-nothing logic, which means that either all selected activities on a resource can be re-scheduled or the function (better the liveCache) cancels and no activities will be re-scheduled.
One reason might be that you have a pegging relation to a fixed activity (this might be a sales order, forecast, an activity outside the propagation range...) which cannot be considered during the
scheduling. The liveCache cannot break the pegging, therefore it cancels the scheduling.
Please have a look at the note 510669 which offers a heuristic on the basis of the algorithm /SAPAPO/HEUR_PLAN_SEQ_PACKAGES. This heuristic should solve your problem. It will re-schedule as many activities as possible and will not cancel if one fails.
Depending on your current release there could be also some correction notes like
1272960
1027194
I hope I could help you further.
Regards,
Tibor

Exception while running custom scheduler OIM 11g R1

I have OIM 11g R1 installed on win 32 platform, and am getting the following exception while running the custom scheduler: Samplescheduledtask
<Jan 12, 2013 7:37:13 PM IST> <Warning> <oracle.iam.scheduler.impl> <BEA-000000>
<XSD Validation Exception: org.xml.sax.SAXParseException: cvc-elt.1: Cannot fin
d the declaration of element 'scheduledTasks'.>
<Jan 12, 2013 7:37:13 PM IST> <Warning> <oracle.iam.scheduler.impl> <BEA-000000>
<XSD Validation Exception: org.xml.sax.SAXParseException: cvc-elt.1: Cannot fin
d the declaration of element 'scheduledTasks'.>
<Jan 12, 2013 7:37:13 PM IST> <Warning> <oracle.iam.scheduler.impl> <BEA-000000>
<XSD Validation Exception: org.xml.sax.SAXParseException: cvc-elt.1: Cannot fin
d the declaration of element 'scheduledTasks'.>
<Jan 12, 2013 7:37:13 PM IST> <Warning> <oracle.iam.scheduler.impl> <BEA-000000>
<XSD Validation Exception: org.xml.sax.SAXParseException: cvc-elt.1: Cannot fin
d the declaration of element 'scheduledTasks'.>
<Jan 12, 2013 7:37:13 PM IST> <Warning> <oracle.iam.scheduler.impl> <BEA-000000>
<XSD Validation Exception: org.xml.sax.SAXParseException: cvc-elt.1: Cannot fin
d the declaration of element 'scheduledTasks'.>
<Jan 12, 2013 7:37:13 PM IST> <Warning> <oracle.iam.scheduler.impl> <BEA-000000>
<XSD Validation Exception: org.xml.sax.SAXParseException: cvc-elt.1: Cannot fin
d the declaration of element 'scheduledTasks'.>
java.lang.ClassNotFoundException: ADP ClassLoader failed to load: oracle.iam.sam
ple.scheduledtask.SampleScheduledTask
at com.thortech.xl.dataobj.tcADPClassLoader.findClass(tcADPClassLoader.j
ava:219)
at oracle.iam.transUI.impl.CustomTaskLoaderImpl.getClassInstance(CustomT
askLoaderImpl.java:12)
at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:146
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:529)
java.lang.ClassNotFoundException: ADP ClassLoader failed to load: oracle.iam.sam
ple.scheduledtask.SampleScheduledTask
at com.thortech.xl.dataobj.tcADPClassLoader.findClass(tcADPClassLoader.j
ava:219)
at oracle.iam.transUI.impl.CustomTaskLoaderImpl.getClassInstance(CustomT
askLoaderImpl.java:12)
at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:146
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:529)
java.lang.ClassNotFoundException: ADP ClassLoader failed to load: oracle.iam.sam
ple.scheduledtask.SampleScheduledTask
at com.thortech.xl.dataobj.tcADPClassLoader.findClass(tcADPClassLoader.j
ava:219)
at oracle.iam.transUI.impl.CustomTaskLoaderImpl.getClassInstance(CustomT
askLoaderImpl.java:12)
at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:146
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:529)
Following is the code of the custom scheduler:
package oracle.iam.sample.scheduledtask;
import java.util.HashMap;
import oracle.iam.scheduler.vo.TaskSupport;
public class SampleScheduledTask extends TaskSupport {
public void execute(HashMap hashMap) throws Exception {
// Display a message when this scheduled task is run
System.out.println("Running the OIM Sample Scheduled Task...");
public HashMap getAttributes() {
return null;
public void setAttributes() {
kindly suggest......
Regards,
KK
Edited by: 958122 on Jan 12, 2013 11:38 PM

Hi,
Please use the below commands to register the plugin:
set the environment variable ORACLE_HOME, OIM_ORACLE_HOME, ANT_HOME,JAVA_HOME,MW_HOME and execute
$ORACLE_HOME/server/plugin_utility/ant -f pluginregistration.xml register
and provide the necessary input.
$ORACLE_HOME/server/bin/PurgeCache.sh All
and provide the necessary input
Restart the OIM managed server
http://docs.oracle.com/cd/E21764_01/doc.1111/e14309/plugins.htm#CHDHECGH
Regards,
Sunny

Facing error- ORA-23324: while running DBMS_JOB.run(job#)

Hi,
I am a new comer to this forum. I'm facing the follwing error
while running a push job in multimaster replication env. Though
able to delete the pending transactions from Deftran relating to
two groups which i'm going to resync.
ORA-23324: error ORA-06512: at line , while creating deferror
entry at "DB.WORLD" with error 100
ORA-06512: at "SYS.DBMS_DEFER_SYS", line 1425
ORA-06512: at "SYS.DBMS_DEFER_SYS", line 1488
ORA-06512: at line 1
any help is appreciated.
thanks
Hsingh

I apologize if you already solved this.. but see Metalink ID 790221.1
+*<Moderator Edit - deleted contents of MOS Doc - pl do NOT post such content - it is a violation of your Support agreement>*+

Error is ocrring while running the page of an ADF application

Hi,
i am facing this error while running a page of an ADF application.
can anybody help??
javax.faces.el.EvaluationException: javax.faces.FacesException: javax.faces.FacesException: The scope of the referenced object: '#{bindings}' is shorter than the referring object

Hi,
you are trying to access object bindings, which scope is request, from object (most probably backing bean) with larger scope like session or pageFlow or application.
some note about it is also here: http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/web_adv.htm#ADFFD1777
regards,
Branislav

Error with Informatica when running the data load for BI Apps

Hi All,
We are facing a different issue on prod which we haven't got on QA. Below given is session log :
Target tables:
W_ORDER_PARTY
READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Sep 22 10:36:16 2010)
READER_1_1_1> BLKR_16019 Read [885] rows, read [0] error rows for source table [S_ORDER_BU] instance name [S_ORDER_BU]
READER_1_1_1> BLKR_16008 Reader run completed.
LKPDP_1> DBG_21097 Lookup Transformation [LKP_ETL_PROC_WID]: Default sql to create lookup cache: SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [LKP_ETL_PROC_WID] from [1048576] to [1050000].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [SFAPROD1], user [siebel]
LKPDP_1:READER_1_1> CMN_1021 Database driver event...
CMN_1021 [DB2 Event Using Array Inserts. connect string = [SFAPROD1]. userid = [siebel]]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Sep 22 10:36:17 2010)
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> RR_4035 SQL Error [
*[IBM][CLI Driver][DB2/AIX64] SQL0204N "SIEBEL.W_PARAM_G" is an undefined name. SQLSTATE=42704*
sqlstate = 42S02
Database driver error...
Function Name : Execute
SQL Stmt : SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
DB2 Fatal Error].
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> BLKR_16004 ERROR: Prepare failed.
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [LKP_ETL_PROC_WID], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [EXPTRANS1], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [EXPTRANS1], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
WRITER_1_*_1> WRT_8325 Final rollback executed for the target [W_ORDER_PARTY] at end of load
WRITER_1_*_1> WRT_8035 Load complete time: Wed Sep 22 10:36:16 2010
In the above log W_PARAM_G table is a warehouse table. We have checked Informatica to find out the issue but there is no error in informatica.
Thanks in advance.
Deepak.

Hi Sandeep,
Yes but if you see the log ,its connecting to OLTP DB(DB2 for Siebel source DB),which it shouldnt
KPDP_1:READER_1_1> DBG_21438 Reader: Source is [SFAPROD1], user [siebel]
LKPDP_1:READER_1_1> CMN_1021 Database driver event...
*CMN_1021 [DB2 Event Using Array Inserts. connect string = [SFAPROD1]. userid = [siebel]]*
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Sep 22 10:36:17 2010)
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> RR_4035 SQL Error [
*[IBM][CLI Driver][DB2/AIX64] SQL0204N "SIEBEL.W_PARAM_G" is an undefined name. SQLSTATE=42704*
I Have check the mapplet ,its same no issues in that as well.
Regards,
Deepak.

Error while running custom schedule task.

Hello,
I have created a schedule task, when I am running the task from sysadmin, it wont show any error message.
In diagnostic log, I got the below error
[2012-11-29T07:00:18.507-08:00] [oim_server1] [ERROR] [] [oracle.iam.transUI.impl] [tid: OIMQuartzScheduler_Worker-7] [userId: oiminternal] [ecid: 80eeb34d89d5ed80:-1384f0e3:13b4bd4b64a:-8000-0000000000000005,1:29060] [APP: oim#11.1.2.0.0] ADP ClassLoader failed to load: com.cgc.iam.customconnector.ac.ReconAC
Please help.
Thanks
sjit

Make sure you have included the jar file containing the class - com.cgc.iam.customconnector.ac.ReconAC in OIM classpath.

Error REP-0300: ORACLE error occurred while running Custom Report

Hi Team.
We are facing a very strange issue here.
We have an env , where all the custom reports are failing .Whereas the concerned env is a clone of the Production instance . There is one more instacne which is also a clone of the prod, over there these reports are working fine .
I have checked all the thread here about this error, but could not get the required information .
We are on RHEL 5 on Linux 64 bit server.
Could you please guide me , how to figure out whats the difference between these cloned instances .
We have an Sr with Oracle Support but its progressing very slowly.
Error trail from log file
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_FROM_DATE='2013/08/01 00:00:00'
P_TO_DATE='2013/08/10 00:00:00'
P_PROJECT_ORG='ALL'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov 28 07:41:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Thanks .

Please confirm that you have the patches mentioned in (Doc ID 1368715.1) applied.
I understand this is a cloned instance, but this error is intermittent and having the patches applied should clear our doubts.
Thanks,
Hussein

Error while running custom app

Hi All,
The following error occurred when custom app is executed.
kindly help in solving the issue.
Thanks
Rakesh Raparthi

Hi Michael,
Using sap UI5 technology.
Thanks
Rakesh R

Error in Informatica while running Customized Workflow - LM_36488

Similar Messages

Maybe you are looking for