Error in inserting the characteristics as info provider

Hi,
I am trying to insert a characteristic as Infoprovider and I am receiving the following message:
InfoObject 0CRM_RG is not a basis characteristic; not used as data target
Can you please guide me in this regard!!!

Hi ,
Infoobject 0CRM_RG may not be defined as master data infoobject. that is why you are getting this error.
this infoobject may be used as attribute in another infoobject, so check out by where used list and make that infoobject as Infoprovider in report u can use this Infoobject 0CRM_RG (mark Infoobject 0CRM_RG as navigational attribute in main infoobject).
Best Regards.

Similar Messages

  • Getting Error in inserting the data in ADF

    I am getting the below Error while inserting the data into Essbase in ADF:
    <Error> <Net> <BEA-000902> <Duplicate expression found in the system property http.nonProxyHosts: localhost|localhost.localdomain|127.0.0.1|::1|sgajulap-in|sgajulap-in.>
    Could you please give any solution to resolve this Error.
    Thanks.
    Swathi

    check below links:
    http://download.oracle.com/javase/6/docs/technotes/guides/net/proxies.html
    http://www.rgagnon.com/javadetails/java-0085.html
    // Get a system property
    String dir = System.getProperty("user.dir");
    // Set a system property
    String previousValue = System.setProperty("application.property", "newValue");

  • Identiying the Profiles based on the input of Info provider

    Hi BW Experts,
    Right now i know the Info Provider Name.I just want to identify the profile name based on the input of Info Provider.
    Can you suggest me any TCODES for identiying the profiles.
    Thanks,
    Jelina.

    Hi,
    I'm explainning below the steps I usually take.
    You'll need to:
    1) Access RSSTOBJDIR table.
    2) Fill INFOCUBE parameter with the infocube's technical name and the AKTPS one with 'X'.
    3) Get the authorization(s) object(s) - OBJECT column.
    4) Go to the AGR_1251 table.
    5) Fill OBJECT parameter with the value(s) of step 3.
    It will be returned a list with the required profiles to access the infocubes entered on step 2.
    Regards,
    Tiago.

  • Error while inserting the value in xmltype field of oracle using ALDSP?

    I am getting the following error, while trying to insert the large xml in the xmltype field of oracle using aldsp service:
    inconsistent datatypes: expected - got CLOB in bea
    But this error does not occur when the input xml is of smaller size.

    Please post the complete error message and stack trace.

  • ORA-01438 error while inserting the BLOB value in the column

    Hi All,
    I have created a table with definition:
    CREATE TABLE stories (id NUMBER(4), story BLOB);
    Now I am trying to populate this table with some values from other table with:
    insert into stories
    select sensitivity_id, multi_value from sensitivity where sensitivity_id=3983021541;
    Here the multi_value column from th source table is also declared as BLOB so I shlould not get this error. What kind of precision needs to be set so the query doesnt faills?
    Regards,
    aashish

    Hi,
    Can you elaorate more on this..I never tried his thing but this is just a part of big procedure where I have to do this.
    Thanks,
    aashish

  • Error while inserting the Unicode (Russian/Chinese) Data in Oracle Database

    Hi all,
         I am using Oracle 9i and have created database with AL32UTF8 character set. I am using OraOLEDDB 9.0.1.0.1 to connect oracle from ATL COM. I have set the NLS_LANG= AMERICAN_AMERICA.AL32UTF8 registry.
         I have created a table ItemMaster with two column ItemName Varchar2(20) and ItemDescription CLOB.
         Values are accepted in ASP page and passed to COM function. In COM function inserting in ItemMaster table using ADO record set.
         It works fine when I insert English Charaters.
         COM is getting crash when insert Russian or Chinese Characters. Error message is given below. Looks like there is problem in OraOLEDB but not sure.
         Guide me if I am doing something wrong.
    Exception: E06D7363
    Address: 0x7C81EB33
    Call Stack:
    kernel32!RaiseException + 0x52
    UTFTran! + 0x4B2D
    UTFTran! + 0x3D39
    UTFTran! + 0x3D11
    UTFTran! + 0x1870
    OLEAUT32!DispCallFunc + 0xC3
    OLEAUT32!DispCallFunc + 0x6D3
    UTFTran! + 0x1C28
    OLEAUT32! + 0x7BF39
    OLEAUT32! + 0x7B1BD
    RPCRT4!NdrProxyFreeBuffer + 0xB5
    RPCRT4!CStdStubBuffer_Invoke + 0x82
    OLEAUT32!VarMonthName + 0xCF89
    ole32!StgGetIFillLockBytesOnFile + 0x10489
    ole32!StgGetIFillLockBytesOnFile + 0x10433
    ole32!CoReleaseMarshalData + 0x7DC
    ole32!CoReleaseMarshalData + 0x701
    ole32!StgGetIFillLockBytesOnFile + 0x10369
    ole32!StgGetIFillLockBytesOnFile + 0x10214
    ole32!StgGetIFillLockBytesOnFile + 0xFF6D
    RPCRT4!NdrGetTypeFlags + 0x1C9
    RPCRT4!NdrGetTypeFlags + 0x12E
    RPCRT4!NdrGetTypeFlags + 0x5A
    RPCRT4!CreateStubFromTypeInfo + 0x2E2
    RPCRT4!CreateStubFromTypeInfo + 0x323
    RPCRT4!NdrConformantArrayFree + 0x28B
    RPCRT4!I_RpcBCacheFree + 0x14C
    RPCRT4!I_RpcBCacheFree + 0x5EA
    RPCRT4!I_RpcBCacheFree + 0x403
    RPCRT4!I_RpcBCacheFree + 0x5D2
    kernel32!GetModuleFileNameA + 0x1B4
    Regards,
    Mani

    Crossposted: http://forum.java.sun.com/thread.jspa?threadID=5293664&tstart=0

  • Error in Uploading the data in Info Cube

    Hi,
    We are implementing SCM 5.0 APO and ECC 6.0 in UK/I client.
    At the moment we are facing one problem in uploading the Excel file into Info Cube.which was working perfectly earlier.
    Through analysis, we come to know that data flows thru PSA. but  when we try to push that data from PSA manually system gives following error message;
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                CX_RSR_X_MESSAGE
    What happened?                                                                                |
    |    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere along the call hierarchy.                                                                               
    Since exceptions represent error situations and this error was not                  
    adquately responded to, the running ABAP program 'SAPLRRMS' has to be    terminated.                                                                               
    Error analysis                                                                               
    An exception occurred which is explained in detail below.                                    
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught  and  therefore caused a runtime error.                                                            
    The reason for the exception is:                                                             
    No text available for this exception                                                                               
    Missing Handling of Application Exception                                                        Program                              RSABW_START_NEW                                          
    Trigger Location of Exception                                                                     Program                                 SAPLRRMS                                             
    Include                                 LRRMSU13                                              Row                                     78                                                   
    Module type                             (FUNCTION)                                            Module Name                             RRMS_X_MESSAGE 
    if somebody can give advice on this! As we could upload the data earlier perfectly.
    Thanks
    Regards
    Jignesh.

    Hi Jignesh,
                      I this the first time you are loading into the cube? Is it the a fresh installation?
    The error message doesn't help you much but I would try a couple of things
    1. Replicate the datasources in source system, Activate the transfer and update rules and then try to load
    2. Try loading only till the PSA and then try to simulate the update to cube. If you are using  BI 7.0, then just load the info package, it will load to PSA and unless you run the DTP, it doesnot update the cube.
    3. This can also be a GUI issue. Make sure that you have all the GUI files installed. Is it a dump with message "CX_RSR_X_MESSAGE"?
    Check the Note 763203 - Termination during InfoCube realignment
    Hope this helps. Please donot hesitate to ask more questions.

  • Error in Inserting the Date + ORACLE

    Imports System.Globalization
    Imports System.Data
    Imports Oracle.DataAccess.Client
    Partial Class _Default
        Inherits System.Web.UI.Page
        Dim con As New OracleConnection("Data Source=XE;User Id=user_test;Password=sarvagya;")
        Dim cmd As New OracleCommand
        Dim da As OracleDataAdapter
        Dim ds As DataSet
        Dim query As String
        Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
            Try
                query = "Insert into Practise2 values(:DOB)"
                cmd = New OracleCommand(query, con)
                Dim formats As String() = {"dd/MM/yyyy", "d/M/yyyy"}
                Dim dt As DateTime
                    cmd.Parameters.Add(":DOB", "TO_DATE('18/07/2011','dd/mm/yyyy')")
                If con.State = ConnectionState.Closed Then
                    con.Open()
                End If
                cmd.ExecuteNonQuery()
            Catch ex As Exception
                MsgBox(ex.Message)
            Finally
                If con.State = ConnectionState.Open Then
                    con.Close()
                End If
            End Try
        End Sub
    End ClassWhen I run the Code I get the ERROR message
    a non-numeric character was found where a numeric character was expected.
    ORACLE TABLE : -
    Create table practise2(dob date)

    Your Parameters.Add line does not look right at all. You are using SQL syntax (TO_DATE) where you should not be.
    This is the Visual Studio Tools forum, for best results, please repost this over on the ODP.NET forum:
    ODP.NET

  • Error when inserting the image in WAD

    Hi,
    I have inserted a .gif image in MIME repository and then in WAD template I have inserted a image and then when I ry to execute the WAD template, everything is working fine in the report but the image/logo is not displayed, the link is being displayed...
    And a warning is displayed at the bottom of the WAD template:
    W2   42:46  Tag '<img>' lacks 'alt' attribute
    tag '<img>' lacks 'alt' attribute: Correct the Template in the editor
    How do I resolve this error???
    Thanks & Regards.

    Hi,
    check whether the "default_host/sap/bw/Mime" service is active  with T-code  SICF.
    logo file name should be in lower case even though it is upper case in MIME repository.
    (Logo path looks like this "sap/bw/Mime/Customer/Images/testlogo.gif")
    Regards,
    Daya Sagar

  • Getting Adobe Lifecycle Error when opening the pdf document to provide comments

    Hi All,
    I am getting AdobeLifeCycle Error message when I am trying to give comments in the pdf document.
    I have a workaround in place for the same but I want a permanent fix.
    PFB the workaround for the same:
    1.Delete the Adobe folder from the users local profile, under the following folders:
    C:\Users\”login”\AppData\local
    C:\Users\”login”\AppData\locallow
    C:\Users\”login”\AppData\Roaming
    2.Delete the contents of the temp file on the C Drive
    Please let me know if some one has faced this issue and have been successful in finding a permanent fix.
    Thanks & Regards,
    Aniket Deshmukh

    PFB the error message:
    Adobe LiveCycle Review Connector - File Not Found’

  • Error in Transport... Info provider does not exist

    Hello,
    I'm getting an error 12 and my transport is getting cancelled due to the following message:
    Infocube/Infoprovider 100481 does not exist
    Error R7 791 when handling objects with type R3TR CUBE.
    I tried looking for a solution. I came across this OSS note:1019764
    But the solution listed is for 7.0 and i'm on 3.5.
    has anyone encountered such an error and if so, what did you do to rectify this problem?
    thanks
    Sam

    Dear Sam,
    Your Error suggests that it failed in transporting the Infocube Aggregates, first make sure all your changes are in place , and if you have added some Infoobejcts in the infocube , then before creating the aggregates you have to reload the data as you might have done in the development while activating the aggregates, so if at all you have added / changed the infocube design dont forget to delete data and refill before you want your aggregates to fill in ...if atall you have not done anything of this sort, then the suggestion would be to transport the changes in a serialized way by breaking the changes..
    Hope it Helps..
    Thanks,
    Krish

  • Error while changing the Display Attribute into Navigational Attribute

    Hi all.. Gud Mrng.
    I was changed the attribute (product) from display attribute into navigational attribute and while save and activating the info object it is not getting activated and it is throwing the below error message.
    Error Message: u201CThe Info object is being used in several data targetsu201D
    My Questions:
    i)     Do I need to delete the data from all the data targets (where this info object is using)??
    ii)     Do I need to delete data only from the main info object (Zmaterial)? Is this single action enough?
    Please suggest me which action I need to follow & What are the precautions need to take while changing the Display Attribute (product) into Navigational attribute of info object (Zmaterial).
    Thanks in advance.
    Thanks & Regards,
    B Venugopal

    Hi Garima
    Only in case of key figures we cannot change it from display to navigational.
    If the info object is a characteristics then in the General tab of the info object if you select 'attribute only' then the iobj would be a display attribute only. If you leave it unmarked then you can use the iobj as a navigational atribute.
    I am sure you know that these settings only mean if a IOBJ can be used as display or navigational.  To  use it as a navigational within another object you will have to change the settings from 'DIS' to 'NAV' for the said info object in the 'Attributes' tab of its parent info object.
    Further if you use the parent info object in any data target / infio provider you will have to further mark the info object as 'navigational' while defining the attrbute of the said data target / info provider. The info object gets displayed in the data target / info provider attribute properties as 'parent IOBJ_info object'
    Cheers
    Umesh

  • Problems generating Hana analytic privileges based on BW info provider

    Hi Experts
    We generate Hana views based on BW Info Providers. We follow the guide “SAP First Guidance – SAP NetWeaver BW 7.40 on HANA View Generation”. . The views appear perfectly in Hana Studio but we are not able to generate the authorizations in Hana.
    On the BW side we have a authorizations relevant info object in the DSO that generate the View in Hana. The info object is linked to an authorization object that again is linked to a role. The role is the assigned to a user. We have synced all our users from BW to Hana using the standard concept (same username in BW and Hana).
    When the view is generated we can see that view in Hana and we can see that a role is also create in Hana. But there are no analytical privilege created and there are no entries added in the table RS2HANA_AUTH_STR. The user also do not get the role assigned to him.
    Are there any other steps that need to be done to be able to generate the authorizations in Hana based on BW authorizations?
    We use BW 7.4 and the generate function (not the import function into Hana).
    Kind regards
    Erik

    Hi Erik,
    Please check if below characteristics are included in the analysis authorization assigned to the user:
    0TCAIPROV = Info provider id
    0TCAACTVT = 03
    0TCAVALID = *
    0TCAKYFNM = *
    <authorization relevant characteristic of your info provider> = Required value.
    If you are assigning these authorizations now, run RS2HANA_CHECK tcode for this user. This should generate analytic privilege and user should get the role in HANA.
    Thanks

  • Error while starting the service

    Hi
    I am trying the web service example using j2ee from
    http://java.sun.com/j2ee/1.4/docs/tutorial/doc/JAXRPC3.html#wp124102
    when I try to deply the service I am getting an exception as follows :
    Can any one help me out ?
    Thanks ,
    Amol
    distribute: C:\j2sdkee1.4\helloapps\MyHelloService.war
    Deploy action running...
    Contacted Server...
    Application MyHelloService transferred
    Application MyHelloService transferred
    Storing final WSDL for Web Service MyHelloService at C:\j2sdkee1.4\repository\applications\MyHelloService\MyHelloService53797.wsdl
    Deployment of MyHelloService is complete.
    Deployment of MyHelloService is complete.
    Completed
    --- Operation Completed Successfully ---
    start: MyHelloService
    Running...
    java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
         java.rmi.RemoteException: null; nested exception is:
         javax.management.ReflectionException
         at com.sun.corba.se.internal.iiop.ShutdownUtilDelegate.mapSystemException(ShutdownUtilDelegate.java:64)
         at javax.rmi.CORBA.Util.mapSystemException(Util.java:65)
         at org.omg.stub.com.sun.enterprise.tools.deployment.backend._JarInstaller_Stub.start(Unknown Source)
         at com.sun.enterprise.deployapi.actions.ModuleStateAction.run(ModuleStateAction.java:58)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: java.rmi.RemoteException: null; nested exception is:
         javax.management.ReflectionException
         at com.sun.enterprise.tools.deployment.backend.JarInstallerImpl.start(JarInstallerImpl.java:1171)
         at org.omg.stub.com.sun.enterprise.tools.deployment.backend._JarInstallerImpl_Tie._invoke(Unknown Source)
         at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
         at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
         at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
         at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
    Caused by: javax.management.ReflectionException
         at com.sun.management.j2se.MOAgents.EmmaBeanUtil.invoke(EmmaBeanUtil.java:346)
         at com.sun.enterprise.management.model.emma.WebModuleMdlEmmaAgent.invoke(WebModuleMdlEmmaAgent.java:425)
         at com.sun.jdmk.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:334)
         at com.sun.jdmk.MetaDataImpl.invoke(MetaDataImpl.java:496)
         at com.sun.jdmk.DefaultMBeanAccessor.invoke(DefaultMBeanAccessor.java:528)
         at com.sun.jdmk.MBeanServerImpl.invoke(MBeanServerImpl.java:579)
         at com.sun.enterprise.management.agent.MEJBUtility.invoke(MEJBUtility.java:314)
         at com.sun.enterprise.management.util.J2EEManagementObjectManager.startModule(J2EEManagementObjectManager.java:636)
         at com.sun.enterprise.tools.deployment.backend.JarInstallerImpl.start(JarInstallerImpl.java:1161)
         ... 5 more
    !!! Operation Failed !!!
    [Completed (time=22.7sec, status=13)]
    **********************************************************************

    Hi Ray,
    I assuming you are on 5.0.2. If so, please refer to chapter 3(Pre-installation) of the install document, specifically the setup of the automation server user. The stated error indicates that the automation user info you entered into the installer does not match up with the entries in the pre-install steps.
    Hope that helps.
    Vasanth

  • Plumtree Job Dispatcher Service giving an error while starting the service

    Could not start the plumtree Job Dispatcher service service on LOcal Computer. The service did not return an error. THis could be an internal windows rror or an internal service error. If the problem persits, contact your system administrator

    Hi Ray,
    I assuming you are on 5.0.2. If so, please refer to chapter 3(Pre-installation) of the install document, specifically the setup of the automation server user. The stated error indicates that the automation user info you entered into the installer does not match up with the entries in the pre-install steps.
    Hope that helps.
    Vasanth

Maybe you are looking for