Error in installing 11g
Dear gurus
as my installation is going on so still need your help
as written in documentation i need below patches for aix 6L
1.IZ41855
2.IZ51456
3.IZ52319
output of command oslevel -s is below
6100-06-01-1043
earlier the sys admin was saying that these packs are already install in aix by default and with higher precision .so i was not
getting with command #/usr/sbin/instfix -i -k
so i didn't checked and run installation ...now during installation its througing error for same patches
so the admin person is saying these are not required for this aix version.so i want whether the oracle 11g support
tl level 06
if its not required can i go with installation command ignore pre-requisite
Regards
Hi user;
I also faced same issue on AIX, my system has upper package but during i hit missing package message. You can safely ignore this errors
I already make on same system 11gR1 11gR2 installation(also rac) wiht those error message but all systems are healty
Regard
Helios
Similar Messages
-
Error/Issues Installing 11g R2 on Win7 64-bit Ultimate Ed
I know this question may have been posted before...but I'm also having issues installing 11g R2 on Windows 7 64-bit Ultimate edition with 4GB RAM.
It's consistently givine failed check during Prerequisite Checks:
- Physical Memory failed
- Available Physical Memory failed
- Swap Size failed
etc.
One of failed message says:
Physical Memory - This is a prerequisite condition to test whether the system has at least 922MB (944128.0KB) of total physical memory.
Expected Value : n/a
Actual Value : n/a
List of errors:
- PRVF-7531 : Physical memory check cannot be performed on node "M-PC"
- Cause: Could not perform check of physical memory on the node indicated.
- Action: Ensure ability to access the node specified and view memory information.
Added loopback and updated hosts file in system32... Ran setup as Administrator. Put zip files into one central directory C:\tempload\oracle11gR2\...
Am I missing something? Access issue somewhere? I had to run notepad as administrator to update hosts file...
Please advise...
Thank you very much in advance for your help!I was able to continue with the installation (with your suggestion) and loaded 11g R2.
Thank you again! -
Error while installing 11g obiee
I am trying to install obiee 11g on my windows 7system
i have installed oracle version 11.1.0.7 as backend
and when i creating rcu utility it getting me a warning
"The database you are connecting is with non-AL32UTF8 Character set. oracle strongly recommends using of AL32UTF8 as database character set."
I am ignoring it and while selecting the component from next step it throw me error
2011-06-28 08:23:44.356 ERROR rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: RCU Operation Failed
oracle.sysman.assistants.common.task.TaskExecutionException: RCU-6083:Failed - Check prerequisites requirement for selected component:BIPLATFORM
Please refer to RCU log at C:\ofm_rcu_win_11.1.1.5.0_disk1_1of1\rcuHome\rcu\log\logdir.2011-06-28_08-19\rcu.log for details.
Component : BIPLATFORM
Error : Repository creation check failed.
Cause : Must connect as SYSDBA to create BIPLATFORM repository.
Action : Connect to the database as SYSDBA. For example, you can login
to the database using the SYS account.
at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:76)
at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
at java.lang.Thread.run(Thread.java:662)
Please help
Edited by: user12116294 on Jun 28, 2011 8:34 AMHi,
The error which was mentioned "The database you are connecting is with non-AL32UTF8 Character set. oracle strongly recommends using of AL32UTF8 as database character set." can be ignored.
"Error : Repository creation check failed." came because while creating the RCU, u must provide the sys user and password as it would created the required "BIPLATFORM"and "BIDEV" users. The error came because u did not use the sys user ....
Please award points if helpful and close the post. -
"Could not find the main class" Error While installing 11g in windows 7
Dear All,
I am getting error message while installing oracle 11g R1(32 bit) on Windows 7(32 bit)
I have downloaded from oracle website only..
After Clicking the OUI I am getting the Error Message pop up is "Could not find the main class.Program will exit"
I don't know what is the reason behind this error .
what would be the reason for this error..
Pls help me....
By
MuthuI think you need to download oracle software again...
Oracle Universal Installer - Could not find main class -
Error while installing OFM 11g - Oracle Identity management suite 11g
Hi,
I am getting following error while installing Oracle Identity management suite 11g (Oracle Internet Directory & Oracle Virtual Directory) on Red Hat Linux 5.0.
"Error in invoking target 'client_sharedlib' of makefile '/apps/idm/Oracle/OracleHome/Oracle_Home/rdbms/lib/ins_rdbms.mk"
the same error is repeating for others also i.e. 'all', 'install" etc.
Can you advice me how to overcome this?
Regards
ChintaHi Chinta,
Pl. check for all gcc and glibc OS packages compatibility with your your OS. This will solve your problem.
Also check that you are not installing a 32 bit IM software on a 64 bit machine or viceversa.
regards,
Sailesh -
Error while installing oracle 11g in centos 5.3
I got this error while installing oracle 11g in my laptop with centos 5.3
the error is:
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 76430 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6000 MB Passed
Checking monitor: must be configured to display at least 256 colors
Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-03-07_12-09-48PM. Please wait ...[oracle@www database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
please help me solve this...i am new to linux so can anyone give me detailed instructions.i tried using the installation guide and even though i got this error...Firstly Thank you everyone for giving me your suggestions.
I tried installing oracle 11g in centos using Tim's tutorial and i all went fine initially i got the oracle 11g installation GUI and i got an error while starting database configuration.
The error was : TNS failed
and i got two options in that dialog box "ignore" and "abort"
after press ignore a few times.the installation finished successfully.
When i opened terminal and typed
sqlplus SYS as SYSDBA
it asked for password
when i gave the password again it showed the error TNS failed
kindly help me solve this..... -
ERROR WHILE INSTALLING OIM 11G
Hi,
When i am installing the below error whille installing oim 11g on windows 7,
https://picasaweb.google.com/107742630291389085108/August42012#5772738295887214898
Could someone please help me.
Installations:
win32_11gR2_database
weblogic 10.3.5
ofm_iam_generic_11.1.1.5.0
ofm_soa_generic_11.1.1.6.0
Regards,
RaguCheck oracle certification matrix first. Your SOA is uncertified. What error you are getting in logs? Check log file shown in image.
regards,
GP -
Inst-5145 error when installing Indentity Management 11g
I have been trying to install 11g Identity Management to a small test server running OEL5 VM's
When I get to the step of Specify Schema Database and fill in to use existing Schema (I had created it with RCU prior I get an error
INST-5145 Exception thrown during second OID installation check and get no further
I cannot locate any reference material for these INST error codes and can't find anything in metalink for this error, perhaps i dint use the right search string
Any ideas as to what this really means much appreciated
This is a fresh installation
Cheers
PeterWLST is a scripting tool that create and manage OIMDomain. It llooks like it's trying to invoke some Jython files(eg:/home/oracle/Oracle/Middleware/Oracle_IDM1/../oracle_common/common/wlst/oracle-jrf-config.py). For some reason it's not finding AppDeployment configuration. THis, probably, will create or manage OIMDomain thru WebLogic. Are you running in GUI mode or silent mode? I will suggest you try to install in silent mode and see if this error will happen.
Question: Are you installing it and configuring this Managed Server in cluster?
I hope this helps,
Thiago Leoncio. -
Can't Install 11g Db, Error ORA 28547/24324/01041
hi,
I was trying to install db 11g and the installation stopped half way through with 3 errors.
1.ORA 24324: SERVICE HANDLE NOT IDENTIFIED
2.ORA 01041: INTERNAL ERROR, HOSTDEF EXTERIOR DOES'NT EXIST
3.ORA 28547: CONNECTION TO SERVER FAILED, PROABLY NET ADMIN ERROR.
I have just trained on oracle application developper and very new to installing a personal database.
My machine is a pentium duo core 1.7, 2gb ram and 120 hdd and my OS is XP professional sp2. I connect through this machine
through my office lan to oracle 9i db in my company server.
I have tried to set up a 11i DB Personal and 10g developer suite on the same machine.
I could figured out the 1st error ORA-01041 and understand that the Environment variables have to be changed before I try to
reinstall 11g.
As I checked up the variable from System>advanced>environment variables it is showing a very long string which is
(C:\app\ravid\product\11.1.0\db_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program
Files\Intel\Wireless\Bin\;C:\ORANT\BIN;)
After looking this up in the c:\oracle folder trace the string only uptil 'bin'.
I have DEVELOPER 2000 NT with Forms runtime and Graphics runtime already on the machine however i did not see any path in the
system environment variable for this, or could it be that the string i mentioned above has that included too..one thing i know for
sure is there was no oracle home before i tried to install the 11g db.
Could someone also help me out with the 1st and 3rd errors as i don't know what they mean?
Will really appreciate if you can help me through this.
Thanks in advance for your time and advice.Re: Can't Install 11g Db, Error ORA 28547/24324/01041
-
Weblogic OMS Configuration Error on OEM 11g install
Hi all,
Please help me, I am trying to install 11G Grid Control EM and on the OEM Installation it fails at step 12 on OMS Configuration with the following error:
FINE: MDS Schema is there
Oct 28, 2011 6:03:18 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil chec
kPort
SEVERE: Exception:
java.net.BindException: Address already in use
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:365)
at java.net.ServerSocket.bind(ServerSocket.java:319)
at java.net.ServerSocket.<init>(ServerSocket.java:185)
at oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil.checkPort(CoreOMS
ConfigAssistantUtil.java:2251)
at oracle.sysman.omsca.adapter.wls.OMSWLSAdapterUtil.checkNodeMgrPort(OM
SWLSAdapterUtil.java:656)
at oracle.sysman.omsca.adapter.wls.OMSWLSAdapter.adapterPreReq(OMSWLSAda
pter.java:1173)
at oracle.sysman.omsca.framework.OMSGenericAdapter.doPreRequisiteChecks(
OMSGenericAdapter.java:264)
at oracle.sysman.omsca.framework.OMSCAFreshInstall.execute(OMSCAFreshIns
tall.java:90)
at oracle.sysman.omsca.framework.OMSConfigAssistantDriver.main(OMSConfig
AssistantDriver.java:210)
Oct 28, 2011 6:03:18 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterPre
Req
FINE: OMSWLSAdapter::Failed to validate node manager port
Oct 28, 2011 6:03:18 AM oracle.sysman.omsca.framework.OMSCAFreshInstall execute
SEVERE: ERROR: Pre req checks of EM failed.
Oct 28, 2011 6:03:18 AM oracle.sysman.omsca.framework.OMSConfigAssistantDriver m
ain
FINE: Got resultfalse
Any ideas would be gratefully appreciated.
I have put the correct JDK on - 1.6
and also 10.3.2 Web logic.
Cheers,
VIBMany thanks for the response however I tried to re-instll my grid control after the process of installing the weblogic and it still fails to recognise the ports.
I have greapped for all port ranges for the EM Upload port:
[root@dc1-eng-poem01 ~]# netstat -an | grep 5556
[root@dc1-eng-poem01 ~]# netstat -an | grep 48890
[root@dc1-eng-poem01 ~]# netstat -an | grep 4890
[root@dc1-eng-poem01 ~]# netstat -an | grep 4889
[root@dc1-eng-poem01 ~]# netstat -an | grep 4891
[root@dc1-eng-poem01 ~]# netstat -an | grep 4892
[root@dc1-eng-poem01 ~]# netstat -an | grep 4893
[root@dc1-eng-poem01 ~]# netstat -an | grep 4894
[root@dc1-eng-poem01 ~]# netstat -an | grep 4895
[root@dc1-eng-poem01 ~]# netstat -an | grep 4896
[root@dc1-eng-poem01 ~]# netstat -an | grep 4897
[root@dc1-eng-poem01 ~]# netstat -an | grep 4898
[root@dc1-eng-poem01 ~]# netstat -an | grep 4899
and no results - yet the port is defaulting to -1 (I am not familair with node manager) Can i bounce the box shutting down weblogic and then try install with weblogic down - or does this need to be active during the install?
Many thanks,
Ric -
Error while installing oracle enterprise manager 11g
Hello,
I am trying to install Oracle enterprise manager 11g & keep on
getting following error at install progress stage :
Error in setting permission of file/directory
/u01/labuser/Oracle/Middleware/oracle_common/oui/jlib/emocmul.jar
with 3 options Retry,Ignore & cancel.
Could anyone guide why i am getting this error & how to fix this problem ?
Thank-You
Rahul Shah.Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Enterprise Manager which you can get more quick response
Regard
Helios -
Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh. -
Hello All,
I have tried to install OBIEE 11g on my system. When I install OBIEE 11g on my system, for 1st time it works very fine, I mean all services up, but the moment i restart my system. The problem starts, even though the services are up, i am not able to open anything, not even console manager.
I got error like:
obiee 11g “Error 404–Not Found From RFC 2068 Hypertext Transfer Protocol — HTTP/1.1: 10.4.5 404 Not Found
Next time I uninstall and install back it works fine, but if i restart again the same story.
Please experts if you have any solution to this problem, please help....i have gone through blogs but not a solution is working.
Thanks a lot
AI can understand your frust everytime ur installing and uninstalling......11g is somewat typical
-->Get the VMware software and install on your lappy,it will function just as another program on windows.
download link :- http://www.oracle.com/technetwork/server-storage/virtualbox/downloads/index.html
installation guide :- http://download.virtualbox.org/virtualbox/UserManual.pdf
-->secondly i used windows 2003 server sp2 and installed on VM
-->third we need to install Oracle DB,before doing tat set the loppback adaptor
-->fourth install the BI software by unzipping it
The same is shown by skura as parts follow these steps for smooth installation.
http://www.skurabigroup.com/blog/?p=676
http://www.skurabigroup.com/blog/?p=700
http://www.skurabigroup.com/blog/?p=719
Cheers,
KK
Edited by: Kranthi.K on Jul 28, 2011 3:51 AM -
How to Install 11g Management Agent
Hi
I installed 11g EM Grid Control (11.1.0.1.0) on RHES 5U2 64bit server. Installation was successful. Now I wish to monitor my other database servers through this OEM. My servers are RHES 4U5 32bit so I downloaded 11g Agent Software for 32bit. runInstaller doesnt seem to work in GUI hence I had to modify the additional_agent.rsp file in the unzipped directory /../response and included details. When I run the installer with -silent option it fails after 5 minutes with Error: Connection timed out.
Since I cannot access internet therefore I have set these values in the .rsp file
SECURITY_UPDATES_VIA_MYORACLESUPPORT="false"
DECLINE_SECURITY_UPDATES="true"
Is there a workaround?
Thank you all
Edited by: user560883 on Jun 10, 2010 3:52 AMHi Rob
It worked while I was typing my response. Now I can see the target in OEM but when I try to set Target Credentials for the DB it fails.
OEM->Home->Preferences->Preferred Credentials->Database Instance->Set Credentials-> Target Credentials
I tried with two different user accounts but both are not accepted. I verified that the accounts are not locked.
Also if I go to Database Instance Page and click on Configure, it doesnt show the property where I can set username and password (dbsnmp). Instead it is showing following error on top
Error occurred while getting information for the specified target. Possible reasons include: the target doesn't exist; connection to the target failed
Any clues? -
Web Interface doesn't work after installing 11g
A couple days ago I decided to install Oracle 11g (after already having 10g Express Edition), after successfully installing 11g, I tried to access 10g EE using http://127.0.0.1:8080/apex/apex, and it doesn't work anymore. I tried using a java program with Netbeans that connects to my 10g Database and there's connection with no problems and I can upload/download data with no problems, I just can't access the web interface.
Thanks in advance.jalvarito wrote:
A couple days ago I decided to install Oracle 11g (after already having 10g Express Edition), after successfully installing 11g, I tried to access 10g EE using http://127.0.0.1:8080/apex/apex, and it doesn't work anymore. I tried using a java program with Netbeans that connects to my 10g Database and there's connection with no problems and I can upload/download data with no problems, I just can't access the web interface.
Thanks in advance.And the error message is . . . ????
Maybe you are looking for
-
Error in writing to file 'C:\WINDOWS\Systems32\msjet35.dll'
Got the follow error message when installing oracle 10.2 on win 2003 server. Error in writing to file 'C:\WINDOWS\Systems32\msjet35.dll' Access is denied. Any ideas?
-
Cant use Export to Excel functionality for ALV if I add a custom button
Hi, I have added a custom button the the ALV toolbar by creating a GUI status and using the USER_COMMAND event. However. Now I dont the get the standard ALV toolbar with all the options for sorting, exporting to excel etc. Can someone show me how
-
Hi: I'm looking for a best practice to centralizing access to the database. All the examples that I have seen on the Sun site and the Internet look a little clumsy. What I'm trying to ask is this. Instead of CODING a connection object, Statment objec
-
Hi, I have an existing BAM Set up. I have changed the DB Name from xyz to abc. I have done changes accordingly in tnsnames.ora file in orabam client-network-admin. When im trying to start the ADC service , it fails. The below mentioned error is writt
-
When I start up my mac it goes to the apple screen then to a gray screen with a circle with a line through it. I recently re-installed the OS. I can't get to the screen for disk utility. What is happening?