Error in installing Java Add in
i am in the process of Installing EP in a Nw2004s system which was having AS-ABAP.
But EP was already installed before and it is not running.
I could not figure out the problem, so was planning to make a new installation
I selected the option Java ADd in for ABAP> MS SQL Server>central instance Java Add in
But while the program is executing i am getting the following error
<b>ERROR 2007-05-29 12:14:20
CJS-30051 Cannot insert a key value pair into the secure store fails; see output of log file SecureStoreInsert.log: SAP Secure Store in the File System - Copyright (c) 2003 SAP AG</b>
So when i see the securestoreinsert.log file i am getting the following message
<b>SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store.</b>
Pls help me in this
Hi,
Visit this link for the same problem and solution
1>A key/value pair with this key already exists in the store
Hope that helps
Similar Messages
-
Error while installing Java Add-Ins on ABAP
Hi All,
I am getting an error while doing installation of Jaba Add-Ins on existing ABAP.
Iam doing installation on AS/400 server having operating system OS/400.
Error appears at the end when instalaltion starts.
Following is the error.
ERROR 2006-07-20 11:49:49
CJS-20032 Cannot create the secure store; see output of log file E:\usr\sap\SAPinst\NW04SR1\WEBAS_JAVA_DB4\ONE_HOST/SecureStoreCreate.log: Attaching Java program to /usr/sap/SAPinst/NW04SR1/WEBAS_JAVA_DB4/ONE_HOST/install/sharedlib/tc_sec_secstorefs.jar.Attaching Java program to /usr/sap/SAPinst/NW04SR1/WEBAS_JAVA_DB4/ONE_HOST/install/sharedlib/exception.jar.Attaching Java program to /usr/sap/SAPinst/NW04SR1/WEBAS_JAVA_DB4/ONE_HOST/install/sharedlib/logging.jar.SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
And the SecureStoreCreate.log content is as follow.
Attaching Java program to /usr/sap/SAPinst/NW04SR1/WEBAS_JAVA_DB4/ONE_HOST/install/sharedlib/tc_sec_secstorefs.jar.
Attaching Java program to /usr/sap/SAPinst/NW04SR1/WEBAS_JAVA_DB4/ONE_HOST/install/sharedlib/exception.jar.
Attaching Java program to /usr/sap/SAPinst/NW04SR1/WEBAS_JAVA_DB4/ONE_HOST/install/sharedlib/logging.jar.
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
java.lang.ExceptionInInitializerError
at java.lang.Error.<init>(Error.java:37)
at java.lang.ExceptionInInitializerError.<init>(ExceptionInInitializerError.java:61)
at javax.crypto.Cipher.a(Unknown Source)
at javax.crypto.Cipher.getInstance(Unknown Source)
at iaik.security.provider.IAIK.addAsProvider(IAIK.java:1655)
at iaik.security.provider.IAIK.addAsJDK14Provider(IAIK.java:1612)
at iaik.security.provider.IAIK.addAsJDK14Provider(IAIK.java:1623)
at com.sap.security.core.server.secstorefs.Crypt.<clinit>(Crypt.java:82)
at com.sap.security.core.server.secstorefs.SecStoreFS.setSID(SecStoreFS.java:158)
at com.sap.security.core.server.secstorefs.SecStoreFS.handleCreate(SecStoreFS.java:804)
at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1274)
Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
at java.lang.Throwable.<init>(Throwable.java:195)
at java.lang.Exception.<init>(Exception.java:41)
at java.lang.RuntimeException.<init>(RuntimeException.java:43)
at java.lang.SecurityException.<init>(SecurityException.java:32)
at javax.crypto.b.<clinit>(Unknown Source)
... 9 more
Caused by: java.lang.SecurityException: Cannot locate policy or framework files|
at java.lang.Throwable.<init>(Throwable.java:195)
at java.lang.Exception.<init>(Exception.java:41)
at java.lang.RuntimeException.<init>(RuntimeException.java:43)
at java.lang.SecurityException.<init>(SecurityException.java:32)
at javax.crypto.b.a(Unknown Source)
at javax.crypto.b.g(Unknown Source)
at javax.crypto.b$0.run(Unknown Source)
... 10 more
I am not able to locate where the problem is.
Can any one suggest me some solution to this problem.
Regards,
Rajesh PatelHI,
Are you installing J2EE Add-in with SSL option activated ? If so, I think there is some IAIK/SSL libraries that have to presented on server to proceed with installation successfully. You can also try installing Add-in without SSL/https option activated and configure SSL afterwards.
Regards,
Mike -
Install Java Add-in for ABAP - error
When I try to instal I got this error
WARNING[E] 2010-10-11 13:44:25.906
CJS-30109 <html> <head> </head> <body> The Java load in database ITM/ZEUS has already been configured.<br>SOLUTION: Remove the schema and load it with a new load before you run this installation. </body></html>
Where can remove this shema and how to load new load?
MirkoHi,
As per error log, Java schema which you are creating already exits in database. If Java Schema already there then why are you installing Java Add-in again ??
You can delete already existing Java Schema as below:
1. Log on as user ora<dbsid>.
2. Start sqlplus and connect to the database. Enter:
sqlplus /nolog
SQLPLUS>connect / as sysdba
3. Enter the following command to delete the database objects of the database schema:
SQLPLUS> drop user SAP<SCHEMA_ID>DB cascade;
4. Enter the following command to get the file name of the corresponding data file in the file system:
SQLPLUS> select file_name from dba_data_files where \
tablespace_name = 'PSAP<SCHEMA_ID>DB';
5. Enter the following command to delete the tablespace of the database schema:
SQLPLUS> drop tablespace PSAP<SCHEMA_ID>DB including contents;
6. Exit sqlplus:
SQLPLUS> exit
7. Delete the data file of tablespace PSAP<SCHEMA_ID>DB from the file system
Thanks
Sunny -
Install JAVA add-in for ABAP problem.
Hello.
I tried to install java Add-in for ABAP on SAP NetWeaver 7.0 Support Release3.
(OS : AIX 5.3 , database : DB2)
The installation of phase "Central Service Instance (SCS) Java Add-in" and "Database instance Java Add-in" is complete
But in the last phase "Central Instance Java Add-in"
It show error
"TYPE=A<BR>STATE=<BR>INFO_SHORT=IO EXCEPTION:
Unexpected end of file from server::<BR>CONFIGURATION="
at step "Configure System Landscape Directory".
(I read it from /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB6/CENTRAL/CI/java.log)
I checked the Environment variable for Java and is set correctly.
I stoped the instance and restart the server ,Then tried to re-install but the same error still appear.
Any idea?
Thanks.
Regards.
- Chai -Thanks for your reply.
I have clear all remain shared memory after stop instance and database.
But it still show the same error.
sapinst_dev.log:
ERROR 2009-05-25 13:45:33.277 [sixxcstepexecute.cpp:951]
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key
|NW_Addin_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|1
3|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|
0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR
( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS:
See output of logfile java.log: 'IO EXCEPTION: Unexpected end of file from
server:: '.).
TRACE 2009-05-25 13:45:33.323 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service
SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > Java Add-In
for ABAP > IBM DB2 for Linux, UNIX, and Windows > Central System > Central Instance
Java Add-In ( Last error reported by the step :Java EE Engine configuratio
n error. DIAGNOSIS: See output of logfile java.log: 'IO EXCEPTION:
Unexpected end of file from server:: '.). You may now </p> <ul> <li> choose <i>Retry</i> t
o repeat the current step. </li> <li> choose <i>View Log</i> to get more information
about the error. </li> <li> stop the task and continue with it later. </
li> </ul> <p> Log files are written to /db2/sourceSAP/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB6/CENTRAL/CI.
</p> </body></html>
TRACE 2009-05-25 13:45:33.323 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
sapinst.log :
ERROR 2009-05-25 13:45:32.830
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log:
'IO EXCEPTION: Unexpected end of file from server:: '.
java.log:
TYPE=A<BR>STATE=<BR>INFO_SHORT=IO EXCEPTION:
Unexpected end of file from server::<BR>CONFIGURATION=
log from Log Browser
ERROR 2009-05-25 13:45:32.830
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'IO EXCEPTION: Unexpected end of file from server:: '.
Please help.
Regards,
- Chai -
Edited by: ChaiChai2 on May 25, 2009 9:21 AM
Edited by: ChaiChai2 on May 25, 2009 9:22 AM
Edited by: ChaiChai2 on May 25, 2009 9:23 AM -
Erroe Message during installing Java Add-In for 2004s NetWeaver BI
Dear all:
I got the following error message when installing Java Add-in(Central Instance) for ABAP in Central system. It happened when the process came to "Start J2EE Engine".
Thank you very much
SzuFen
========================================================
INFO 2006-11-01 15:37:10 [iaxxcmsclient.cpp:112]
CIaMsgClient::CIaMsgClient(sap15, 3904)
Connect to message server (sap15/3904) succeeded.
INFO 2006-11-01 15:37:10 [iaxxcmsclient.cpp:122]
CIaMsgClient::~CIaMsgClient()
Disconnect from message server (sap15/3904) succeeded.
INFO 2006-11-01 15:37:11
CJSlibModule::writeInfo_impl()
State of instance BW7/DVEBMGS04 changed from ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: STARTING) to ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: STARTING).
ERROR 2006-11-01 15:37:11
CJSlibModule::writeError_impl()
CJS-30153 Java process server0 of instance BW7/DVEBMGS04 reached state UNKNOWN after having state STARTING. Giving up.
ERROR 2006-11-01 15:37:11
FCO-00011 The step startJava with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|4|0|startJava was executed with status ERROR .Hi,
On which OS it is?
Please let me know the Java version,is it something like this
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142sr1aifx-20051020 (<b>SAP</b> 142SR1a + 88494 + 84428 + 83602 + 89528 + 90372 + 88233 + 66827 + 92741 + 95636 + 96556 + 96581) (JIT enabled: jitc))
It should be something like above,ie which should be specific for SAP.Otherwise you will experience similar issues.
Regards,
Cherry -
Error while installing J2EE Add- In to the ABAP system
Error while installing J2EE Add-In to the ABAP system
We are installing J2EE Add-In to the ECC5 System in the new hardware.
When are getting Error while installing J2EE Add-In to the ABAP system.
Transaction Begin*****************************
ERROR 2005-08-10 14:58:28
CJSlibModule::writeLogEntry()
CJS-20011 J2EE engine configuration error. DIAGNOSIS: Error when
configuring J2EE Engine. See output of
logfile /usr/sap/QSS/install/batchconfig.log: 'My Library Path
is: /usr/j2se/jre/lib/sparcv9/server:/usr/j2se/jre/lib/sparcv9:/usr/j2se/jre/../lib/sparcv9:/tmp/sapinst_exe.13084.1123702275:/usr/lib::/usr/openwin/lib:/usr/sap/QSS/SYS/exe/run:/oracle/QSS/920_64/lib:/oracle/QSS/920_64/lib32:/usr/lib
ElementInfoTask has finished successfully on dispatcher
ConsoleLogsTask has finished successfully on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on dispatcher
ElementInfoTask has finished successfully on server
ConsoleLogsTask has finished successfully on server
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on server
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on server
ChangeServicePropsTask has finished successfully. Service: dbpool on
server
ChangePasswordsTask finished successfully.
Error occured while connecting to database (UploadFile). Msg: No such
algorithm: DESede
Transaction end***********************************
We tried twice clean installation, after removing j2ee dir, SCS and
resp profiles and droping PSAPQSSDB tablespace and SAPQSSDB user.
I have also confirmed the passwords in ABAP system/000 for SAPJSF, DDIC, J2EE_ADMIN, J2EE_GUEST.
We are getting the same error in both tries.
Kindly advice us to resolve the problem.
Thanks and Regards,
SrinivasAnanda,
you saved my day! I've been banging my head against the wall with this same problem during a J2EE add-in installation for SRM 4.0 on Windows, in preparation of an LAC 2.0 installation. I had tried deleting the schema first, but that didn't work. After I removed the sys\global\security folder as well, it worked perfectly.
Thank you. -
Error: installing Java Add-in for Central instance
Dear experts,
i've installed the SCS and the Java Add-in for DB successful. While trying to install the java add-in for the central instance i get the following error:
An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > Java Add-In for ABAP > MaxDB > Central System > Central Instance Java Add-In ( Last error reported by the step :TypeError: instance has no properties (in script NW_Addin_CI|ind|ind|ind|ind, line 109346: ???)
Thanks in advance.
DanielHi,
Check below thread:
Error installing SAP NetWeaver 2004s Java Trial Version (SP9)
Thanks
Sunny -
Install error FJS-00003: JAVA Add-In on AMD64 platform (NW04 SR1)
Hi gurus:
I came over an ugly error while trying to install the XI.
1. - I downloaded the corresponding software from the SAP Marketplace, as in the normal DVDs the AMD64 platform was not included.
2. - I copied the CDs for the EXPORT and the JAVA-Engine to one directory each, respective called export and JavaDVD. In directory JavaDVD I had to modify the LABEL.ASC file to be later accepted.
3. - I installed the ABAP WAS 6.40, unicode version. Everything worked ok. Also the post installation tasks could be carried out without problems.
4. - I wnated to install the JAVA Add-In. Everything starts fine, but the installation stops with the following lines in "sapinst_dev.log":
ERROR 2006-08-17 18:34:33 [iaxxejsbas.cpp:170]
EJS_ErrorReporter
FJS-00003 TypeError: fmgt.getNode(listOnCD) has no properties (in script InstallationScript_265, line 8607: ???)
TRACE [iaxxcwalker.cpp:301]
CDomWalker::processStep()
No way out - I can only stop the installation.
The respective lines in the install script are:
8591: var sdaPath = installer.getCD("J2EE-ENG")+"/FS";
8593: // OS400 needs its own kind of pathname
8594: if (installer.onOS400()) sdaPath = os4_convertPath(sdaPath);
8597: // fill table with SDA which are to be deployed
8599: deployUnitsTable.remove();
8601: var listOnCD = sdaPath+"/DEPLOY.LST";
8603: var sdaList = new Array ();
8605: var fmgt = new FileMgt();
8607: var fstream = fmgt.getNode(listOnCD).getFileStream("READ");
... (blank lines deleted)
I can not heal that problem, I only understand that such a file does not exist! The directory has the following files:
I:\JavaDVD\CDLABEL.ASC
I:\JavaDVD\CDLABEL.EBC
I:\JavaDVD\content of JavaDVD.txt
I:\JavaDVD\Copy of LABEL.ASC
I:\JavaDVD\COPY_TM.HTM
I:\JavaDVD\COPY_TM.TXT
I:\JavaDVD\CRCFILE.DAT
I:\JavaDVD\J2EE_OSINDEP
I:\JavaDVD\LABEL.ASC
I:\JavaDVD\LABEL.EBC
I:\JavaDVD\LABELIDX.ASC
I:\JavaDVD\SCS_NTAMD64
I:\JavaDVD\SHAFILE.DAT
I:\JavaDVD\sss.txt
I:\JavaDVD\VERSION.ASC
I:\JavaDVD\VERSION.EBC
I:\JavaDVD\J2EE_OSINDEP\CDVersion.txt
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG
I:\JavaDVD\J2EE_OSINDEP\JDI
I:\JavaDVD\J2EE_OSINDEP\JDKVersion.xml
I:\JavaDVD\J2EE_OSINDEP\KernelVersions.xml
I:\JavaDVD\J2EE_OSINDEP\LABEL.ASC
I:\JavaDVD\J2EE_OSINDEP\LABELIDX.ASC
I:\JavaDVD\J2EE_OSINDEP\PROD_LABEL
I:\JavaDVD\J2EE_OSINDEP\SDM
I:\JavaDVD\J2EE_OSINDEP\TEST-APP
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\FS
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\J2EENGINE
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\JDMP
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\LABEL.ASC
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\FS\TC_SEC_JAVA_CRYPTO_FS_LIB.SDA
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\J2EENGINE\J2EEINSTALL.SAR
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\J2EENGINE\SLDSERV.JAR
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\JDMP\EXPDUMP.001
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\JDMP\IMPORT.XML
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\JDMP\LABEL.ASC
I:\JavaDVD\J2EE_OSINDEP\JDI\LABEL.ASC
I:\JavaDVD\J2EE_OSINDEP\JDI\OFFLINE
I:\JavaDVD\J2EE_OSINDEP\JDI\ONLINE
I:\JavaDVD\J2EE_OSINDEP\JDI\OFFLINE\DEPLOY.LST
I:\JavaDVD\J2EE_OSINDEP\JDI\OFFLINE\SAPDEVINFF09_0.SCA
I:\JavaDVD\J2EE_OSINDEP\JDI\ONLINE\DEPLOY.LST
I:\JavaDVD\J2EE_OSINDEP\JDI\ONLINE\SAPBUILDT09_0.SCA
I:\JavaDVD\J2EE_OSINDEP\JDI\ONLINE\SAPDEVINF09_0.SCA
I:\JavaDVD\J2EE_OSINDEP\SDM\LABEL.ASC
I:\JavaDVD\J2EE_OSINDEP\SDM\SDMKIT.JAR
I:\JavaDVD\J2EE_OSINDEP\TEST-APP\630
I:\JavaDVD\J2EE_OSINDEP\TEST-APP\LABEL.ASC
I:\JavaDVD\J2EE_OSINDEP\TEST-APP\630\calculator.ear
I:\JavaDVD\J2EE_OSINDEP\TEST-APP\630\CalculatorLibrary.sda
I:\JavaDVD\J2EE_OSINDEP\TEST-APP\630\ShoppingCalculator.ear
I:\JavaDVD\J2EE_OSINDEP\TEST-APP\630\UtilityLibrary.sda
I:\JavaDVD\SCS_NTAMD64\LABELIDX.ASC
I:\JavaDVD\SCS_NTAMD64\SCS
I:\JavaDVD\SCS_NTAMD64\SCS\LABEL.ASC
I:\JavaDVD\SCS_NTAMD64\SCS\NT
I:\JavaDVD\SCS_NTAMD64\SCS\NT\AMD64
I:\JavaDVD\SCS_NTAMD64\SCS\NT\AMD64\SCS.SAR
I:\JavaDVD\SCS_NTAMD64\SCS\NT\AMD64\SCSCLIENT64NUC.SAR
I:\JavaDVD\SCS_NTAMD64\SCS\NT\AMD64\SCSCLIENT64UC.SAR
Any help appreciated!!
Many thanks in advance!
stephanSOLVED
hi peers. Finally I've got an answer from SAP. The file was simply missing from the distribution! I created it in the corresponding subdirectory:
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\FS\
with just one line of text in it:
TC_SEC_JAVA_CRYPTO_FS_LIB.SDA
This solved that problem - the step could be carried out without any more problems.
BTW: What I do not understand is that the file was missing. Not only from the downloaded media, also from SPA's original DVDs. No such installation can work.... -
Installing Java Add-In for an existing ABAP System -Error SQL compatibility
Hello gurus,
We have a system and it has only the ABAP instance! So my goal is install the JAVA iinstance. In this momment I´m reading the section "4.4.2 Installing the Java Add-In for an Existing ABAP System (Optional)" in installation guide "SAP ERP 6.0 SR3" (ABAP+JAVA). So, I want to install the JAVA instance which is the Java Add-In for an existing ABAP system!
So what I did was followed that instructions on that section in guide!
As you certainly know this process has three sequential phases:
1) Central Services Instance (SCS) Java Add-In
2) Database Instance Java Add-In
3) Central Instance Java Add-In
The first phase - Central Services Instance (SCS) Java Add-In - it already finished with success, but I´m faccing with a weird error in second phase Database Instance Java Add-In when I entered all required input parameters, SAPinst shows an error that says:
The database PRD has the wrong compatibility level. The database used for the installation of an SAP system must have compatibility level: 80 for MS SQL Server 2000 90 for MS SQL Server 2005 SOLUTION: See the MS SQL Server documentation on how to set the compatibility level for a database.
I don´t know what´s happen, in fact my database is an SQL Server 2008 (100), but I already change it at management studio, the compatibility level to MS SQL Server 2005, but still the error remains!!! I also tried to ran again the sapinst process, I restarted it but it still show me this error!!
Can you tell me why and how can I solve this problem?
Best regards,
João Dimas - PortugalHello Sunny,
I still have this error... I don´t know what do to more for this situation!
I found one not which report this error of compatibility - Note 1152240 - Setting Up Microsoft SQL Server 2008 (R2) - in chapter "VII TROUBLESHOOTING" which said to follow the instructions in chapter III - "Installing SAP systems based on SAP NetWeaver 7.0 SR3".
When I read this last chapter (III) it tell us to do:
If you want to install an SAP system based on SAP NetWeaver 7.0 SR3 on SQL Server 2008, you cannot use the Installation Master and Kernel DVD that you received from SAP or downloaded from SAP Service Marketplace. Instead, you have to do the following:
Patch your runtime libraries by applying the procedure that is described in note 684106 for your release and machine architecture.
Use a modified Installation Master DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Installation Master DVD".
Use a modified Kernel DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Kernel DVD".
I did everything that is said in the note (except the "Creating a modified Kernel DVD") because I can not access to the note 1480785 (it say: "The requested SAP Note is either in reworking or is released internally only")
Can you help me... can you guide me... please!?
Best regards,
João Dimas - Portugal -
Error Message with Installing Java Add in Component 640
We are trying to install a JAVA Add-in for ABAP using the Installation
Master CD 51031149. From SAPINST, SAP Netweaver '04 Support
release 1 > JAVA Add-in for ABAP > IBM DB2 UDB for iSeries >
Central System > JAVA Finalization, we are getting the error message
on the screen JAVA System - General Parameters: Cannot find the default
profile for the SAP system SDS (where we are trying to install the
addinat the default location "\ac4sap02.nmhg.com/sapmnt/SDS/profile/
DEFAULT.PFL. Make sure the installation step 'Preparation of Central
Instance Host' has run successfullyon the central instance host for the
SAP system SDSand that the profile directory is mounted at
'undefined/SDS/profile'.
From our install server @ '/usr/sap'SDS/SYS/profile' I have a
DEFAULT.PFL, DEFAULT.1.PFL, (2) SDS_DVEBMGS86_ac4sap files.
We are on an iSeries 570 4-way, installing SRM4.0, XI3.0 with SUS, CCM, TREX LAC and IPC.
Thanks
Chris Sugg
NACCO Inc.Hi Chris,
I am also getting the same error while installing the SAP Web AS 6.40 SR1 on IBM iSeries OS.
Error Message:"Cannot find the default profile for the SAP system <SID> at the default location /sapmnt/SDS/profile/
DEFAULT.PFL Make sure the installation step 'Preparation of Central
Instance Host' has run successfullyon the central instance host for the
SAP system SDSand that the profile directory is mounted at
'undefined/SDS/profile'."
I already apply Note: 789188
Can U Guide me the solution...
Regards -
Error when install Java Central Intance Add in
I've installed an ABAP stack and it works smoothly. Java Central Instance Service(add-in) and Java Database Instance(add-in) are both installed successfully. When I install Java Central Instance(Add-in), I get an error when system asks me to input passwords of Java admin accounts. I use same password for all sap account, eg. james123, but in this step, I input same password, the screen does not change to the next.
I paste error info below for reference.
=====================
=======sapinst.log======
=====================
WARNING 2008-08-06 20:08:01
Execution of the command "/tmp/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/DB6/DISTRIBUTED/CI/install/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/DB6/DISTRIBUTED/CI/install/lib:/tmp/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/DB6/DISTRIBUTED/CI/install/sharedlib:/tmp/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/DB6/DISTRIBUTED/CI/install -c sysnr=00 -c ashost=eccdev -c client=001 -c user=DDIC -c XXXXXX -a checkBeforeCreate -u J2EE_ADMIN -p XXXXXX -r SAP_J2EE_ADMIN -message_file UserCheck.message" finished with return code 2. Output:
java.lang.ClassNotFoundException: com.sap.security.tools.UserCheck
at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)
Also, I issued following commands to extract J2EEINSTALL.SAR to the temp directory.
cd /tmp/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/DB6/DISTRIBUTED/CI
/sapmnt/DEV/exe/SAPCAR -xvf /ECC6_setup/java/51032257/J2EE_OSINDEP/J2EE-INST/J2EEINSTALL.SAR
In client 001, I did following with SU01.
1. Create user SAPJSF, user type is system, grant role SAP_BC_JSF_COMMUNICATION_RO and SAP_BC_JSF_COMMUNICATION.
2. Create user J2EE_ADMIN, user type dialog, grant role SAP_J2EE_ADMIN .
3. Create user J2EE_GUEST, user type dialog, grant role SAP_J2EE_GUEST .
User J2EE_ADMIN and J2EE_GUEST can log on to client 001 successfully.
I still have the same problem after that. Please advise.
BTW, platform is RedHat AS4U5, database is DB2 V9.
James1. Yes, it's a distributed installation. I choose ABAP stack installation and then choose Java installation as add in.
2. Yes, J2EE_ADMIN & J2EE_GUEST can log on to system with password james123.
3. In usercheck log file, it contains a part of information of sapinst.log, shows below.
java.lang.ClassNotFoundException: com.sap.security.tools.UserCheck
at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79) -
Error while installing Java on Web AS ABAP on AS/400
Hi ,
I am trying installation of Java Add-Ins on Web AS ABAP.
Installation is being done on IBM iSeries server having operating
system OS/400.
But when I am supplying JDK path in setup , It is showing me
error "Directory given in path is not a valid JDK directory."
I went through all the relevent notes but it could not resolve the
problem.
This error has not occurred while I have done installation on
development system , And Whole installation has been completed
successfully on Development system. But on production system it is
giving this error.
By going thourgh SAPInst_dev.log, It seems me that It is an error in
creating a new stub job by TMKSVR.
Find the following sample log for your reference from sapinst_dev.
TRACE [synxctask.cpp:345]
CSyTaskImpl::start(false)
OS4Trace: "E:\QIBM\ProdData\Java400\jdk14/bin/java" does not exist or
is no Windows executable. Checking remote iSeries host.
TRACE [synxctask.cpp:448]
CSyTaskImpl::start(false)
OS4Trace: "/QIBM/ProdData/Java400/jdk14/bin/java" is an existing IFS
object. Creating remote iSeries process.
TRACE [synxctask.cpp:592]
CSyTaskImpl::start(false)
OS4Trace: Could not create new TMKSVR stub job named "java".
INFO 2006-08-17 14:59:13
CJSlibModule::writeInfo_impl()
Execution of the command "E:\QIBM\ProdData\Java400\jdk14/bin/java '-
version'" finished with status TST_ERROR.
INFO 2006-08-17 14:59:13
CJSlibModule::writeInfo_impl()
Execution of the command "E:\QIBM\ProdData\Java400\jdk14/bin/java '-
version'" finished with return code -1. Output:
This is some portion of error.
Following sentance seems to me , which may be root .
<b>CSyTaskImpl::start(false)
OS4Trace: Could not create new TMKSVR stub job named "java".</b>
And I checked in log files for TMKSVR , There are not stub log files
has been created for this command. So it seems new stub job is not
being created.
I am not able to proceed for installation due to this error.
Please suggest some solution at the earliest.
Regards,
Rajesh Patel
mail to : [email protected]
(m) 001-619-886-4149Dear, Please check my guide regarding this problem at
http://scn.sap.com/community/netweaver-administrator/blog/2012/07/12/install-tmksvr-and-create-an-installation-share-for-ibm-as400
Best Regards. -
SAP is not coming up after installing Java Add-in
Hi,
I have installed a Java Add-in for an existing ABAP system. At the stage of "start J2EE engine" it is throwing an error message saying that Java is not coming up after 1142 seconds. I checked config tool and it is working fine. I restarted SAP. After restarting SAP, SAP is coming up and after 1 or 2 mins the disp+work is getting stopped and all the work processes are getting died. I couldn't able to understand & resolve the issue. The system is NetWeave 04. Here is the dev_w0 trace information.
*dev_w0 trace file information*
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Feb 05 12:06:29 2009
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4489]
M sysno 00
M sid IDS
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 247
M intno 20020600
M make: multithreaded, Unicode
M pid 4780
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4780) [dpxxdisp.c 1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 20328 (1452)
M DpShMCreate: sizeof(tm_adm) 2969176 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07530040, size: 3391480)
M DpShMCreate: allocated sys_adm at 07530040
M DpShMCreate: allocated wp_adm at 07531B88
M DpShMCreate: allocated tm_adm_list at 07536AF0
M DpShMCreate: allocated tm_adm at 07536B18
M DpShMCreate: allocated wp_ca_adm at 0780B970
M DpShMCreate: allocated appc_ca_adm at 07811730
M DpShMCreate: allocated comm_adm_list at 07813670
M DpShMCreate: allocated comm_adm at 07813688
M DpShMCreate: allocated vmc_adm_list at 0785A358
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0785A380
M DpShMCreate: allocated wall_adm at 0785A388
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X
X Thu Feb 05 12:06:30 2009
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Feb 05 12:06:31 2009
M calling db_connect ...
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4489]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9708]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ord-sapproj_IDS_00 on host ord-sapproj (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Feb 05 12:06:31 2009
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9893
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4780) [dpnttool.c 357]
Kindly help me in getting the solution ASAP.
Thaks in Advance.
Kind Regards,
MogileeswarYour profile parameters are messed up; check your instance profile has below parameters:
jstartup/trimming_properties = off
jstartup/protocol = on
jstartup/vm/home = /opt/java1.4
jstartup/max_caches = 500
jstartup/release = 700
jstartup/instance_properties = $(jstartup/j2ee_properties):$(jstartup/sdm_properties)
j2ee/dbdriver = $(DIR_EXECUTABLE)/db2jcc.jar:$(DIR_EXECUTABLE)/db2jcc_license_cu.jar
rdisp/j2ee_start_control = 1
rdisp/j2ee_start = 1
rdisp/j2ee_libpath = $(DIR_EXECUTABLE)
exe/j2ee = $(DIR_EXECUTABLE)/jcontrol$(FT_EXE)
rdisp/j2ee_timeout = 600
rdisp/frfc_fallback = on
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00 -
Install Java Add-In for existing ABAP == 'First MSCS Node' step fails
I am in the process of installing the Java Add-In for an existing ABAP System.
I am doing the High-Availability Installation Services.
There are seven (7) steps:
1. Central Services Instance (CSC) Java Add-In
2. First MSCS Node
3. Database Instance Java Add-In
4. Additional MSCS Node
5. Enqueue Replication Server
6. Central Instance Java Add-In
7. Dialog Instance
Step #1 was completed successfully.
Step #2 (First MSCS Node) keeps failing with the following warnings/error:
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
WARNING 2011-11-02 07:38:04.928
Execution of the command "cluster.exe RESOURCE "SAP BWP 00 Service"" finished with return code 5007. Output:
Listing status for resource 'SAP BWP 00 Service':
Resource Group Node Status
System error 5007 has occurred (0x0000138f).
The cluster resource could not be found.
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
WARNING 2011-11-02 07:40:29.085
Execution of the command "M:\usr\sap\BWP\ASCS00\exe\sapstartsrv.exe -u -q -s BWP -n 00" finished with return code 128. Output:
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
ERROR 2011-11-02 07:40:29.210
FCO-00011 The step dCreateSecondNewSCSServiceWithVirtualHostName with step key |MSCS_A|windows|ind|ind|ind|0|0|SAPServices|windows|ind|ind|ind|9|0|dCreateSecondNewSCSServiceWithVirtualHostName was executed with status ERROR .This seems to be an issue with the clustering solution. Please, refer to the following article link:
http://support.microsoft.com/default.aspx?scid=kb;en-us;281796
See if that helps
Edited by: David Fitzgibbon on Nov 2, 2011 2:18 PM -
Trouble Installing Java Add-In
Hello, I am having trouble installing the Java Add-In to the existing ABAP Web AS 6.40. The installation fails during the step "SAP System Installation". When I check the log files, the error that occured involves a system service not starting. Upon further investigation I found out the the system service SAPSID_Number will not start. This is the system number designated for the Java Add-In. The service for the ABAP system starts up fine. I can not manually turn this service on. Does anyone know why this problem may have occured, and what possible solutions exist?
Hello Holland,
Check:
-what user runs the service
-maybe the user is locked
-try to run it manualy and check your event viewer in application and security tabs.
write down the details you got.
Kind Regards,
Dimitry Haritonov
Maybe you are looking for
-
File to Soap synchronous Scenario
Hi Experts, I have designed an synchronous File to SOAP scenario in PI 7.31. I am able to send the request am getting the response to target path also correctly but am not able to see the msg in SXMB_MONI.am not using ICO am using dual stack in
-
How to convert inode number to path (for Eudora to Mail conversion)
I've seen a header line in my Eudora client that has what I believe to be an inode number in it that represents a path: X-Attachments: :Server:622049:style.css: Server is the volume name and the 622049 appears to be the inode file system path to the
-
Characteristics of Purchase requisition
Hi Gurus, I am looking for a FM which can update the characteristics values of paritcular purchase requisition. I found a BAPI 'BAPI_OBJCL_CHANGE' which can update the characteristic values of material, but I am not sure how this can be used for upda
-
After Upgrading the SOLMAN to SPS12 the SAP EWA generation to word fail!
Hello, <p> after Upgrading the SOLMAN system to SPS12 the SAP Early WatchAlert generation to word fail. We use MS Word 2002 SP3! EarlyWatch Alert Report, EarlyWatch Alert Report with Graphics, all Service Level Reportings - No report can generate to
-
Using Flex/PHP to Display MYSQL data and Images
Does anyone have any good examples of using Flex 3 in conjunction with PHP to display data and images from a mysql database? I've searched a lot and it seems hard to find this combination. I have manged to create a login system using this which allow