Error in Loading Process
While loading some Datasources in BW DEV I am getting the following error.
Overall Status: Errors Occurred: or Missing Message
Requests.(messages): everything OK
Extraction(message): Missing Messages
Transfer(idocs and TRFC):Errors Occurred
Request IDOC:Application document not posted
Info Idoc 1: sent, not arrived: IDOC ready for Dispatch(ALE Service)
Processing(data packet):no data
Please give some solution.
Regards
Deepak
If you are loading Via PSA, then you can push request from PSA to target. OR If data loaded successfully and activation only fails, them make request status (both Quality and total) to Green and try to activate.
If a delta fails it wont allow subsequent delta loads until failed one is reloaded /repeated.
As you deleted the last load and loaded it again, it should be ok.
Hope it helps..
Similar Messages
-
Failing to load processes after installing patch 10.1.2.3
I have installed patch 10.1.2.3 after Oracle advised that it may resolve some database adapter problems I was getting in 10.1.2.0.2. However after installing the patch, many of the BPEL processes are now failing to load when I bounce the OC4J component and I am getting ORABPEL-05215 errors.
I turned on debug logging and an extract of the log file is as follows, has anybody got any ideas on how I might resolve these errors;
<2008-07-09 15:32:33,311> <ERROR> <default.collaxa.cube.engine.deployment> <CubeProcessLoader::create>
<2008-07-09 15:32:33,310> <ERROR> <default.collaxa.cube.engine.deployment> Process "DRSSecuritiesReader" (revision "1.0") load FAILED!!
<2008-07-09 15:32:33,375> <DEBUG> <default.collaxa.cube.engine.dispatch> <BaseDispatchSet::receive> Receiving message log process event message afa47b51cbfc4dfa:4ee70b:11b0
83c6e51:-7ffc for set system
<2008-07-09 15:32:33,376> <DEBUG> <default.collaxa.cube.engine.dispatch> <Dispatcher::adjustThreadPool> Allocating 1 thread(s); pending threads: 1, active threads: 0, total
: 0
<2008-07-09 15:32:33,378> <DEBUG> <default.collaxa.cube.engine.dispatch> <QueueConnectionPool::getConnection> Fetched a queue connection from pool java:comp/env/jms/collaxa
/BPELWorkerQueueFactory, available connections=24, total connections=25
<2008-07-09 15:32:33,403> <DEBUG> <default.collaxa.cube.engine.dispatch> <DispatcherBean::send> Sent message to queue
<2008-07-09 15:32:33,403> <DEBUG> <default.collaxa.cube.engine.dispatch> <QueueConnectionPool::releaseConnection> Released queue connection to pool java:comp/env/jms/collax
a/BPELWorkerQueueFactory, available connections=25, total connections=25
<2008-07-09 15:32:33,404> <DEBUG> <default.collaxa.cube.engine.deployment> <CubeProcessHolder::bind> Exception while loading process
java.lang.AbstractMethodError
at com.collaxa.cube.engine.core.BaseCubeProcess.loadActivationAgents(BaseCubeProcess.java:946)
at com.collaxa.cube.engine.core.BaseCubeProcess.load(BaseCubeProcess.java:310)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:66)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:391)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.load(CubeProcessLoader.java:302)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAndBind(CubeProcessHolder.java:882)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.getProcess(CubeProcessHolder.java:790)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAll(CubeProcessHolder.java:362)
at com.collaxa.cube.engine.CubeEngine.loadAllProcesses(CubeEngine.java:910)
at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:284)
at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:250)
at com.collaxa.cube.ejb.impl.ServerBean.loadProcesses(ServerBean.java:219)
at IServerBean_StatelessSessionBeanWrapper14.loadProcesses(IServerBean_StatelessSessionBeanWrapper14.java:2466)
at com.collaxa.cube.admin.agents.ProcessLoaderAgent$ProcessJob.execute(ProcessLoaderAgent.java:401)
at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)
<2008-07-09 15:32:33,419> <ERROR> <default.collaxa.cube.engine.deployment> <CubeProcessHolder::loadAll> Error while loading process 'DRSSecuritiesReader', rev '1.0': Error
while loading process.
The process domain encountered the following errors while loading the process "DRSSecuritiesReader" (revision "1.0"): null.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "DRSSecuritiesReader" (revision "1.0"): null.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:1270)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAndBind(CubeProcessHolder.java:883)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.getProcess(CubeProcessHolder.java:790)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAll(CubeProcessHolder.java:362)
at com.collaxa.cube.engine.CubeEngine.loadAllProcesses(CubeEngine.java:910)
at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:284)
at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:250)
at com.collaxa.cube.ejb.impl.ServerBean.loadProcesses(ServerBean.java:219)
at IServerBean_StatelessSessionBeanWrapper14.loadProcesses(IServerBean_StatelessSessionBeanWrapper14.java:2466)
at com.collaxa.cube.admin.agents.ProcessLoaderAgent$ProcessJob.execute(ProcessLoaderAgent.java:401)
at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)I forgot to mention that I did flush the JAR cache to make sure the new JAR's would be downloaded.
Gerrit -
I have this error on deployed process (in BPEL console). What is this?
I have this error on deployed process (in BPEL console). What is this?
The following exception occured while loading this Process:
Exception Name:
java.lang.ClassCastException
Exception Description:
null
Suggested Fix:
Context:
Stack Trace:
--------------------------------------------------------------------------------------------There is some more log (debug mode on domain).
thanks.
<2006-07-05 09:53:43,276> <DEBUG> <askatin.collaxa.cube.activation> <AdapterFramework::Inbound> Looking up Resource Adapter JNDI location 'eis/AQ/aqSample'
<2006-07-05 09:53:43,276> <INFO> <askatin.collaxa.cube.activation> <AdapterFramework::Inbound> Creating new instance of Resource Adapter oracle.tip.adapter.aq.AQResourceAdapter
<2006-07-05 09:53:43,276> <DEBUG> <askatin.collaxa.cube.activation> <AdapterFramework::Inbound> Looking up Resource Adapter JNDI location 'eis/AQ/aqSample'
<2006-07-05 09:53:43,276> <INFO> <askatin.collaxa.cube.activation> <AdapterFramework::Inbound> Creating new instance of Resource Adapter oracle.tip.adapter.aq.AQResourceAdapter
<2006-07-05 09:53:43,431> <DEBUG> <askatin.collaxa.cube.engine.deployment> <DeploymentHelper::deployProcess> Deployed file /oracle/product/oas1012/ias/integration/orabpel/domains/askatin/deploy/bpel_NotifyUserOfChange_1.0.jar
<2006-07-05 09:53:43,809> <DEBUG> <askatin.collaxa.cube.engine.deployment> <CubeProcessMonitorWork::run> Loading process archive bpel_NotifyUserOfChange_1.0.jar
<2006-07-05 09:53:43,811> <DEBUG> <askatin.collaxa.cube.engine.deployment> <BPELArchive::unpack> Unpacking process 'NotifyUserOfChange', revision '1.0' from BPEL archive 'bpel_NotifyUserOfChange_1.0.jar'
<2006-07-05 09:53:43,841> <DEBUG> <askatin.collaxa.cube.engine.deployment> <BPELArchive::unpack> Extracted archive stale ... reextract
<2006-07-05 09:53:44,386> <DEBUG> <askatin.collaxa.cube.engine.deployment> <CubeProcessFactory::create> Creating process 'NotifyUserOfChange' (revision '1.0')
<2006-07-05 09:53:44,389> <DEBUG> <askatin.collaxa.cube.engine.deployment> <CubeProcessFactory::loadProcess> Cannot find process class bpel.p0.BPEL_BIN ... recompile process
<2006-07-05 09:53:44,389> <DEBUG> <askatin.collaxa.cube.compiler> home directory is: /oracle/product/oas1012/ias/integration/orabpel
<2006-07-05 09:53:44,426> <DEBUG> <askatin.collaxa.cube.compiler> lib dir is: /oracle/product/oas1012/ias/integration/orabpel/lib
<2006-07-05 09:53:44,426> <DEBUG> <askatin.collaxa.cube.xml> <ProcessSchemaManager::loadWSDLs> Begin loading wsdl for partner "ReceiveFromIfs" from "file:/C:/distr/oracle/collabration/ContentServices_WebServices/sample_code/sample_custom_workflows/jdev_projects/SetLinkOnNew/Dequeue.wsdl"
<2006-07-05 09:53:44,426> <ERROR> <askatin.collaxa.cube.engine.deployment> <CubeProcessFactory::generateProcessClass>
Process "NotifyUserOfChange" (revision "1.0") compilation failed.
<2006-07-05 09:53:44,427> <DEBUG> <askatin.collaxa.cube.engine.deployment> <CubeProcessFactory::create> Error creating process
java.lang.NullPointerException
at com.collaxa.cube.engine.CubeContextHelper.getLocationResolver(CubeContextHelper.java:113)
at com.collaxa.cube.ws.wsdl.WSDLManager.getWSDL(WSDLManager.java:200)
at com.collaxa.cube.xml.xsd.xerces.ProcessSchemaManager.loadWSDLs(ProcessSchemaManager.java:214)
at com.collaxa.cube.lang.compiler.BPELProcessModel.loadWSDLs(BPELProcessModel.java:148)
at com.collaxa.cube.lang.compiler.bpel.BPELValidator.validateServerSide(BPELValidator.java:56)
at com.collaxa.cube.lang.compiler.CubeProcessor.validateServerSide(CubeProcessor.java:1192)
at com.collaxa.cube.lang.compiler.CubeProcessor.transformServerSide(CubeProcessor.java:663)
at com.collaxa.cube.lang.compiler.CubeParserHelper.compileServerSide(CubeParserHelper.java:89)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.generateProcessClass(CubeProcessFactory.java:224)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.loadProcess(CubeProcessFactory.java:174)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.loadProcess(CubeProcessFactory.java:117)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:52)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:391)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.load(CubeProcessLoader.java:302)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAndBind(CubeProcessHolder.java:881)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadArchive(CubeProcessHolder.java:824)
at com.collaxa.cube.engine.CubeEngine.loadProcessArchive(CubeEngine.java:939)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.loadProcessArchive(BPELDomainManagerBean.java:390)
at IBPELDomainManagerBean_StatelessSessionBeanWrapper34.loadProcessArchive(IBPELDomainManagerBean_StatelessSessionBeanWrapper34.java:2157)
at com.collaxa.cube.engine.deployment.CubeProcessMonitorWork.run(CubeProcessMonitorWork.java:130)
at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:267)
at java.lang.Thread.run(Thread.java:534)
<2006-07-05 09:53:44,428> <DEBUG> <askatin.collaxa.cube.engine.deployment> <CubeProcessLoader::create>
java.lang.NullPointerException
at com.collaxa.cube.engine.CubeContextHelper.getLocationResolver(CubeContextHelper.java:113)
at com.collaxa.cube.ws.wsdl.WSDLManager.getWSDL(WSDLManager.java:200)
at com.collaxa.cube.xml.xsd.xerces.ProcessSchemaManager.loadWSDLs(ProcessSchemaManager.java:214)
at com.collaxa.cube.lang.compiler.BPELProcessModel.loadWSDLs(BPELProcessModel.java:148)
at com.collaxa.cube.lang.compiler.bpel.BPELValidator.validateServerSide(BPELValidator.java:56)
at com.collaxa.cube.lang.compiler.CubeProcessor.validateServerSide(CubeProcessor.java:1192)
at com.collaxa.cube.lang.compiler.CubeProcessor.transformServerSide(CubeProcessor.java:663)
at com.collaxa.cube.lang.compiler.CubeParserHelper.compileServerSide(CubeParserHelper.java:89)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.generateProcessClass(CubeProcessFactory.java:224)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.loadProcess(CubeProcessFactory.java:174)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.loadProcess(CubeProcessFactory.java:117)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:52)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:391)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.load(CubeProcessLoader.java:302)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAndBind(CubeProcessHolder.java:881)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadArchive(CubeProcessHolder.java:824)
at com.collaxa.cube.engine.CubeEngine.loadProcessArchive(CubeEngine.java:939)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.loadProcessArchive(BPELDomainManagerBean.java:390)
at IBPELDomainManagerBean_StatelessSessionBeanWrapper34.loadProcessArchive(IBPELDomainManagerBean_StatelessSessionBeanWrapper34.java:2157)
at com.collaxa.cube.engine.deployment.CubeProcessMonitorWork.run(CubeProcessMonitorWork.java:130)
at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:267)
at java.lang.Thread.run(Thread.java:534)
<2006-07-05 09:53:44,429> <ERROR> <askatin.collaxa.cube.engine.deployment> <CubeProcessLoader::create>
<2006-07-05 09:53:44,429> <ERROR> <askatin.collaxa.cube.engine.deployment> Process "NotifyUserOfChange" (revision "1.0") load FAILED!!
<2006-07-05 09:53:44,429> <DEBUG> <askatin.collaxa.cube.engine.dispatch> <BaseDispatchSet::receive> Receiving message log process event message 11d1def534ea1be0:1ee2c2c:10c3a1465c2:-7fea for set system
<2006-07-05 09:53:44,430> <DEBUG> <askatin.collaxa.cube.engine.dispatch> <Dispatcher::adjustThreadPool> Allocating 1 thread(s); pending threads: 1, active threads: 0, total: 463
<2006-07-05 09:53:44,430> <DEBUG> <askatin.collaxa.cube.engine.dispatch> <QueueConnectionPool::getConnection> Fetched a queue connection from pool java:comp/env/jms/collaxa/BPELWorkerQueueFactory, available connections=24, total connections=25
<2006-07-05 09:53:44,432> <DEBUG> <askatin.collaxa.cube.engine.dispatch> <DispatcherBean::send> Sent message to queue
<2006-07-05 09:53:44,432> <DEBUG> <askatin.collaxa.cube.engine.dispatch> <QueueConnectionPool::releaseConnection> Released queue connection to pool java:comp/env/jms/collaxa/BPELWorkerQueueFactory, available connections=25, total connections=25
<2006-07-05 09:53:44,433> <DEBUG> <askatin.collaxa.cube.engine.deployment> <CubeProcessHolder::bind> Exception while loading process
java.lang.NullPointerException
at com.collaxa.cube.engine.CubeContextHelper.getLocationResolver(CubeContextHelper.java:113)
at com.collaxa.cube.ws.wsdl.WSDLManager.getWSDL(WSDLManager.java:200)
at com.collaxa.cube.xml.xsd.xerces.ProcessSchemaManager.loadWSDLs(ProcessSchemaManager.java:214)
at com.collaxa.cube.lang.compiler.BPELProcessModel.loadWSDLs(BPELProcessModel.java:148)
at com.collaxa.cube.lang.compiler.bpel.BPELValidator.validateServerSide(BPELValidator.java:56)
at com.collaxa.cube.lang.compiler.CubeProcessor.validateServerSide(CubeProcessor.java:1192)
at com.collaxa.cube.lang.compiler.CubeProcessor.transformServerSide(CubeProcessor.java:663)
at com.collaxa.cube.lang.compiler.CubeParserHelper.compileServerSide(CubeParserHelper.java:89)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.generateProcessClass(CubeProcessFactory.java:224)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.loadProcess(CubeProcessFactory.java:174)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.loadProcess(CubeProcessFactory.java:117)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:52)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:391)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.load(CubeProcessLoader.java:302)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAndBind(CubeProcessHolder.java:881)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadArchive(CubeProcessHolder.java:824)
at com.collaxa.cube.engine.CubeEngine.loadProcessArchive(CubeEngine.java:939)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.loadProcessArchive(BPELDomainManagerBean.java:390)
at IBPELDomainManagerBean_StatelessSessionBeanWrapper34.loadProcessArchive(IBPELDomainManagerBean_StatelessSessionBeanWrapper34.java:2157)
at com.collaxa.cube.engine.deployment.CubeProcessMonitorWork.run(CubeProcessMonitorWork.java:130)
at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:267)
at java.lang.Thread.run(Thread.java:534)
<2006-07-05 09:53:44,434> <ERROR> <askatin.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "domain manager": Error while loading process.
The process domain encountered the following errors while loading the process "NotifyUserOfChange" (revision "1.0"): null.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "NotifyUserOfChange" (revision "1.0"): null.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:1269)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAndBind(CubeProcessHolder.java:882)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadArchive(CubeProcessHolder.java:824)
at com.collaxa.cube.engine.CubeEngine.loadProcessArchive(CubeEngine.java:939)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.loadProcessArchive(BPELDomainManagerBean.java:390)
at IBPELDomainManagerBean_StatelessSessionBeanWrapper34.loadProcessArchive(IBPELDomainManagerBean_StatelessSessionBeanWrapper34.java:2157)
at com.collaxa.cube.engine.deployment.CubeProcessMonitorWork.run(CubeProcessMonitorWork.java:130)
at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:267)
at java.lang.Thread.run(Thread.java:534) -
Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adilDo you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Error occured during load process com.essbase.api.base.EssException: (-1):
I am trying extract the Measures dimension from Sample application by following John's blog (ODI Series - Loading Essbase Metadata) . Its giving error on extracting metadata from Sample basic.
ODI Ver 10.1.3.6.3
Error
Error occured during load process com.essbase.api.base.EssException: (-1):
Error log :
2010-07-17 04:25:30,741 INFO [DwgCmdExecutionThread:null:9]: ODI Hyperion Essbase Adapter Version 9.3.1.1
2010-07-17 04:25:30,741 INFO [DwgCmdExecutionThread:null:9]: Connecting to Essbase application [Sample] on [M2BTG.BADAKLNG.COM]:[1423] using username [admin].
2010-07-17 04:25:30,760 INFO [DwgCmdExecutionThread:null:9]: Successfully connected to the Essbase application.
2010-07-17 04:25:30,760 INFO [DwgCmdExecutionThread:null:9]: Essbase Load IKM option RULES_FILE = prodload
2010-07-17 04:25:30,762 INFO [DwgCmdExecutionThread:null:9]: Essbase Load IKM option RULE_SEPARATOR = Tab
2010-07-17 04:25:30,762 INFO [DwgCmdExecutionThread:null:9]: Essbase Load IKM option PRE_LOAD_MAXL_SCRIPT =
2010-07-17 04:25:30,762 INFO [DwgCmdExecutionThread:null:9]: Essbase Load IKM option POST_LOAD_MAXL_SCRIPT =
2010-07-17 04:25:30,762 INFO [DwgCmdExecutionThread:null:9]: Essbase Load IKM option ABORT_ON_PRE_MAXL_ERROR = true
2010-07-17 04:25:30,763 INFO [DwgCmdExecutionThread:null:9]: Essbase Load IKM option RESTRUCTURE_DATABASE = KEEP_ALL_DATA
2010-07-17 04:25:30,774 INFO [DwgCmdExecutionThread:null:9]: Begining the load process.
2010-07-17 04:25:30,792 ERROR [DwgCmdExecutionThread:null:9]: Error occured during load process com.essbase.api.base.EssException: (-1): null.
2010-07-17 04:25:30,792 INFO [DwgCmdExecutionThread:null:9]: Load process completed.
2010-07-17 04:25:30,792 INFO [DwgCmdExecutionThread:null:9]: Logging out and disconnecting from the essbase application.
On checking the toplology manager, it gives error as shown below.
rg.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 23, in ?
com.hyperion.odi.essbase.ODIEssbaseException: (-1): null
at com.hyperion.odi.essbase.ODIEssbaseMetaWriter.loadData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx9.f$0(<string>:23)
at org.python.pycode._pyx9.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.k(e.java)
at com.sunopsis.dwg.cmd.h.A(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Caused by: com.essbase.api.base.EssException: (-1): null
at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
at com.essbase.server.framework.EssOrbPluginDirect.essMainBuildDimension(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
at com.essbase.api.session.EssOrbPlugin.essMainBuildDimension(Unknown Source)
at com.essbase.api.datasource.EssCube.buildDimension(Unknown Source)
at com.hyperion.odi.essbase.wrapper.EssbaseApplication.buildDimension(Unknown Source)
... 32 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: (-1): null
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.k(e.java)
at com.sunopsis.dwg.cmd.h.A(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Please Help me
Rgds
Uka FPYou won't get much response with an error like that, what I can suggest is have a look at one of the blogs I wrote going through loading metadata :- http://john-goodwin.blogspot.com/2008/11/odi-series-loading-essbase-metadata.html
Try building some test metadata loads against the sample.basic application to get a feel for how to do it.
Cheers
John
http://john-goodwin.blogspot.com/ -
"DD8x". Error message for loading process:Operating system error !
Using the OLE command I receive the following error:
Cannot load the file "File Name" with the loading process "DD8x". Error message for loading process:
Operating system error <> !
strCommand ="DATAFILEIMPORT('J:\ctf\GM\040119-2\dat7.dat','',0)"
lsuccess = IDIACommand.CmdExecuteSync(strCommand)
I get the same error with the "DataLoadHdFile" command.
After the error happens, I cannot load any files in the directory until I
reboot DIAdem.Hi punkmonkey,
I'm curious why you compare the results of the "DataLoadHdFile" command with that of the "DataFileImport" command. The former is a time-honored DAT-file-specific command for only reading the header file contents-- NOT the data, and the latter is a brand new DIAdem 9.0 function for loading all sorts of data files-- TDM files included.
If you want to load a DAT file using an OLE command, why don't you try the time-honored "DataLoad" command, which is specifically designed for loading DAT files? The "DataLoadHdFile" command is really only used to do selective loading (specific channels or rows) of part of a DAT file. Do you want to load selectively, or do you want to load all the channels from the DAT file?
When you get the same error with
the "DataLoadHdFile" command, are you executing that command also through OLE automation, or directly in DIAdem? What happens if you try both the "DataLoadHdFile" and the "DataFileImport" commands directly from DIAdem (no OLE)?
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
Hey there,
When i try to load the itunes introduction i only get: an error occured while processing this directive. What can i do!?Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Getting error While loading data from ERP integrator to HFM
Hello,
We are getting the following error while loading the data from ERPI to HFM.
2013-12-31 22:44:54,133 INFO [AIF]: ERPI Process Start, Process ID: 300
2013-12-31 22:44:54,137 INFO [AIF]: ERPI Logging Level: DEBUG (5)
2013-12-31 22:44:54,139 INFO [AIF]: ERPI Log File: C:\Windows\TEMP\/aif_501_300.log
2013-12-31 22:44:54,141 INFO [AIF]: Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
[Java HotSpot(TM) 64-Bit Server VM (Oracle Corporation)]
2013-12-31 22:44:54,143 INFO [AIF]: Java Platform: java1.7.0_25
2013-12-31 22:44:56,821 INFO [AIF]: COMM Process Periods - Insert Periods - START
2013-12-31 22:44:56,828 DEBUG [AIF]:
SELECT l.SOURCE_LEDGER_ID
,l.SOURCE_LEDGER_NAME
,l.SOURCE_COA_ID
,l.CALENDAR_ID
,'0' SETID
,l.PERIOD_TYPE
,NULL LEDGER_TABLE_NAME
FROM AIF_BALANCE_RULES br
,AIF_COA_LEDGERS l
WHERE br.RULE_ID = 27
AND l.SOURCE_SYSTEM_ID = br.SOURCE_SYSTEM_ID
AND l.SOURCE_LEDGER_ID = br.SOURCE_LEDGER_ID
2013-12-31 22:44:56,834 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_PERIODS (
PROCESS_ID
,PERIODKEY
,PERIOD_ID
,ADJUSTMENT_PERIOD_FLAG
,GL_PERIOD_YEAR
,GL_PERIOD_NUM
,GL_PERIOD_NAME
,GL_PERIOD_CODE
,GL_EFFECTIVE_PERIOD_NUM
,YEARTARGET
,PERIODTARGET
,IMP_ENTITY_TYPE
,IMP_ENTITY_ID
,IMP_ENTITY_NAME
,TRANS_ENTITY_TYPE
,TRANS_ENTITY_ID
,TRANS_ENTITY_NAME
,PRIOR_PERIOD_FLAG
,SOURCE_LEDGER_ID
SELECT DISTINCT brl.LOADID PROCESS_ID
,pp.PERIODKEY PERIODKEY
,prd.PERIOD_ID
,COALESCE(prd.ADJUSTMENT_PERIOD_FLAG, 'N') ADJUSTMENT_PERIOD_FLAG
,COALESCE(prd.YEAR,0) GL_PERIOD_YEAR
,COALESCE(prd.PERIOD_NUM,0) GL_PERIOD_NUM
,prd.PERIOD_NAME GL_PERIOD_NAME
,COALESCE(prd.PERIOD_CODE, CAST(COALESCE(prd.PERIOD_NUM,0) AS VARCHAR(38))) GL_PERIOD_CODE
,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) GL_EFFECTIVE_PERIOD_NUM
,COALESCE(ppa.YEARTARGET, pp.YEARTARGET) YEARTARGET
,COALESCE(ppa.PERIODTARGET, pp.PERIODTARGET) PERIODTARGET
,'PROCESS_BAL_IMP' IMP_ENTITY_TYPE
,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) IMP_ENTITY_ID
,prd.PERIOD_NAME IMP_ENTITY_NAME
,'PROCESS_BAL_TRANS' TRANS_ENTITY_TYPE
,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) TRANS_ENTITY_ID
,pp.PERIODDESC TRANS_ENTITY_NAME
,'N' PRIOR_PERIOD_FLAG
,1 SOURCE_LEDGER_ID
FROM (
AIF_BAL_RULE_LOADS brl
INNER JOIN TPOVCATEGORY pc
ON pc.CATKEY = brl.CATKEY
INNER JOIN TPOVPERIOD_FLAT_V pp
ON pp.PERIODFREQ = pc.CATFREQ
AND pp.PERIODKEY >= brl.START_PERIODKEY
AND pp.PERIODKEY <= brl.END_PERIODKEY
LEFT OUTER JOIN TPOVPERIODADAPTOR_FLAT_V ppa
ON ppa.PERIODKEY = pp.PERIODKEY
AND ppa.PERIODFREQ = pp.PERIODFREQ
AND ppa.INTSYSTEMKEY = 'FMTEST2'
INNER JOIN AIF_GL_PERIODS_STG prd
ON prd.SOURCE_SYSTEM_ID = 3
AND prd.CALENDAR_ID IN ('10000')
AND prd.SETID = '0'
AND prd.PERIOD_TYPE = 'Month'
AND prd.ADJUSTMENT_PERIOD_FLAG = 'N'
AND prd.START_DATE > pp.PRIORPERIODKEY
AND prd.START_DATE <= pp.PERIODKEY
WHERE brl.LOADID = 300
ORDER BY pp.PERIODKEY
,GL_EFFECTIVE_PERIOD_NUM
2013-12-31 22:44:56,915 INFO [AIF]: COMM Process Periods - Insert Periods - END
2013-12-31 22:44:56,945 INFO [AIF]: COMM Process Periods - Insert Process Details - START
2013-12-31 22:44:56,952 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_DETAILS (
PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,TARGET_TABLE_NAME
,EXECUTION_START_TIME
,EXECUTION_END_TIME
,RECORDS_PROCESSED
,STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
SELECT PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,'AIF_EBS_GL_BALANCES_STG' TARGET_TABLE_NAME
,CURRENT_TIMESTAMP EXECUTION_START_TIME
,NULL EXECUTION_END_TIME
,0 RECORDS_PROCESSED
,'PENDING' STATUS
,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' LAST_UPDATED_BY
,CURRENT_TIMESTAMP LAST_UPDATE_DATE
FROM (
SELECT DISTINCT PROCESS_ID
,IMP_ENTITY_TYPE ENTITY_TYPE
,IMP_ENTITY_ID ENTITY_ID
,IMP_ENTITY_NAME ENTITY_NAME
,(COALESCE(SOURCE_LEDGER_ID,0) * 100000000 + GL_EFFECTIVE_PERIOD_NUM) ENTITY_NAME_ORDER
FROM AIF_PROCESS_PERIODS
WHERE PROCESS_ID = 300
) q
ORDER BY ENTITY_NAME_ORDER
2013-12-31 22:44:56,963 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_DETAILS (
PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,TARGET_TABLE_NAME
,EXECUTION_START_TIME
,EXECUTION_END_TIME
,RECORDS_PROCESSED
,STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
SELECT PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,'TDATASEG' TARGET_TABLE_NAME
,CURRENT_TIMESTAMP EXECUTION_START_TIME
,NULL EXECUTION_END_TIME
,0 RECORDS_PROCESSED
,'PENDING' STATUS
,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' LAST_UPDATED_BY
,CURRENT_TIMESTAMP LAST_UPDATE_DATE
FROM (
SELECT PROCESS_ID
,TRANS_ENTITY_TYPE ENTITY_TYPE
,MIN(TRANS_ENTITY_ID) ENTITY_ID
,TRANS_ENTITY_NAME ENTITY_NAME
,MIN(COALESCE(SOURCE_LEDGER_ID,0) * 100000000 + GL_EFFECTIVE_PERIOD_NUM) ENTITY_NAME_ORDER
FROM AIF_PROCESS_PERIODS
WHERE PROCESS_ID = 300
AND PRIOR_PERIOD_FLAG = 'N'
GROUP BY PROCESS_ID
,TRANS_ENTITY_TYPE
,TRANS_ENTITY_NAME
) q
ORDER BY ENTITY_NAME_ORDER
2013-12-31 22:44:56,970 INFO [AIF]: COMM Process Periods - Insert Process Details - END
2013-12-31 22:44:57,407 DEBUG [AIF]: EBS/FS GL Balances Print Variables - Printing Variables - START
2013-12-31 22:44:57,408 DEBUG [AIF]:
p_process_id: 300
p_sql_db_type: ORACLE
p_partitionkey: 12
p_rule_id: 27
p_source_system_id: 3
p_application_id: 26
p_target_application_type: HFM
p_is_multi_currency: true
p_data_load_method: CLASSIC_VIA_EPMI
p_bal_balance_method_code: STANDARD
p_bal_ledger_group_code: SINGLE
p_bal_amount_type: MONETARY
p_prd_entity_name: JAN-13
p_prd_period_id: 135
p_prd_gl_period_name: JAN-13
p_prd_source_ledger_id: 1
p_prd_source_coa_id: 101
p_source_ledger_id: 1
p_source_coa_id: 101
p_bal_actual_flag: A
p_bal_seg_column_name: SEGMENT1
p_max_ccid_loaded_to_stg: 148137
2013-12-31 22:44:57,408 DEBUG [AIF]: EBS/FS GL Balances Print Variables - Printing Variables - END
2013-12-31 22:44:57,806 INFO [AIF]: LKM EBS/FS Extract Type - Load Audit AND Full Refresh - START
2013-12-31 22:44:57,817 DEBUG [AIF]:
SELECT p.PROCESS_ID
,br.RULE_NAME
,l.SOURCE_LEDGER_NAME
FROM AIF_GL_LOAD_AUDIT aud
,AIF_PROCESSES p
,AIF_BALANCE_RULES br
,AIF_COA_LEDGERS l
WHERE aud.SOURCE_SYSTEM_ID = 3
AND aud.SOURCE_LEDGER_ID = 1
AND aud.GL_PERIOD_ID = 135
AND aud.BALANCE_TYPE = 'A'
AND p.PROCESS_ID = aud.LAST_LOADID
AND p.STATUS = 'RUNNING'
AND p.PROCESS_ID <> 300
AND br.RULE_ID = p.RULE_ID
AND l.SOURCE_SYSTEM_ID = aud.SOURCE_SYSTEM_ID
AND l.SOURCE_LEDGER_ID = aud.SOURCE_LEDGER_ID
2013-12-31 22:44:57,826 DEBUG [AIF]:
SELECT 'Y' VALID_FLAG
FROM GL_PERIOD_STATUSES
WHERE APPLICATION_ID = 101
AND SET_OF_BOOKS_ID = 1
AND PERIOD_NAME = 'JAN-13'
AND CLOSING_STATUS IN ( 'O','C','P' )
2013-12-31 22:44:57,847 DEBUG [AIF]:
SELECT 'Y' EXISTS_FLAG
FROM GL_TRACK_DELTA_BALANCES
WHERE SET_OF_BOOKS_ID = 1
AND PROGRAM_CODE = 'FEM'
AND PERIOD_NAME = 'JAN-13'
AND ACTUAL_FLAG = 'A'
AND EXTRACT_LEVEL_CODE = 'DTL'
AND CURRENCY_TYPE_CODE = 'B'
AND ENABLED_FLAG = 'Y'
2013-12-31 22:44:57,883 DEBUG [AIF]:
SELECT MAX(DELTA_RUN_ID) MAX_DELTA_RUN_ID
FROM GL_BALANCES_DELTA
WHERE SET_OF_BOOKS_ID = 1
AND PERIOD_NAME = 'JAN-13'
AND ACTUAL_FLAG = 'A'
2013-12-31 22:44:57,898 DEBUG [AIF]:
SELECT brl.EXECUTION_MODE
,( SELECT CASE COUNT(aud.DELTA_RUN_ID) WHEN 0 THEN 'N' ELSE 'Y' END
FROM AIF_GL_LOAD_AUDIT aud
WHERE aud.SOURCE_SYSTEM_ID = 3
AND aud.SOURCE_LEDGER_ID = 1
AND aud.GL_PERIOD_ID = 135
AND aud.BALANCE_TYPE = 'A'
AND aud.LAST_LOADID <> brl.LOADID
AND COALESCE( aud.STATUS, 'SUCCESS' ) = 'SUCCESS'
) GL_LOAD_AUDIT_SUCCESS_FLAG
,( SELECT CASE COUNT(aud.DELTA_RUN_ID) WHEN 0 THEN 'N' ELSE 'Y' END
FROM AIF_GL_LOAD_AUDIT aud
WHERE aud.SOURCE_SYSTEM_ID = 3
AND aud.SOURCE_LEDGER_ID = 1
AND aud.GL_PERIOD_ID = 135
AND aud.BALANCE_TYPE = 'A'
AND aud.LAST_LOADID <> brl.LOADID
AND aud.STATUS = 'RUNNING'
) GL_LOAD_AUDIT_RUNNING_FLAG
FROM AIF_BAL_RULE_LOADS brl
WHERE brl.LOADID = 300
2013-12-31 22:44:57,904 DEBUG [AIF]:
INSERT INTO AIF_GL_LOAD_AUDIT ( LAST_LOADID
,DELTA_RUN_ID
,SOURCE_SYSTEM_ID
,SOURCE_LEDGER_ID
,GL_PERIOD_ID
,BALANCE_TYPE
,GL_EXTRACT_TYPE
,STATUS
) VALUES ( 300
,0
,3
,1
,135
,'A'
,'FULLREFRESH'
,'RUNNING'
2013-12-31 22:44:57,907 DEBUG [AIF]:
DELETE FROM AIF_EBS_GL_BALANCES_STG
WHERE SOURCE_SYSTEM_ID = 3
AND SOURCE_COA_ID = 101
AND SOURCE_LEDGER_ID = 1
AND ACTUAL_FLAG = 'A'
AND PERIOD_NAME = 'JAN-13'
2013-12-31 22:44:59,283 INFO [AIF]: LKM EBS/FS Extract Type - Load Audit AND Full Refresh - END
2013-12-31 22:45:06,507 INFO [AIF]: COMM End Process Detail - Update Process Detail - START
2013-12-31 22:45:06,514 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'SUCCESS'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 57408
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 300
AND ENTITY_TYPE = 'PROCESS_BAL_IMP'
AND ENTITY_NAME = 'JAN-13'
2013-12-31 22:45:06,519 INFO [AIF]: COMM End Process Detail - Update Process Detail - END
2013-12-31 22:45:07,106 INFO [AIF]: EBS/FS Load Data - Load TDATASEG_T - START
2013-12-31 22:45:07,112 INFO [AIF]:
Import Data from Source for Period 'January 2013'
2013-12-31 22:45:07,115 DEBUG [AIF]:
SELECT brl.PARTITIONKEY
,brl.CATKEY
,brl.PLAN_TYPE
,CASE brl.PLAN_TYPE
WHEN 'PLAN1' THEN 1
WHEN 'PLAN2' THEN 2
WHEN 'PLAN3' THEN 3
WHEN 'PLAN4' THEN 4
WHEN 'PLAN5' THEN 5
ELSE 0
END PLAN_NUMBER
,brl.EXECUTION_MODE
,br.AMOUNT_TYPE
,br.BALANCE_SELECTION
,br.CURRENCY_CODE
,br.INCL_ZERO_BALANCE_FLAG
,br.BAL_SEG_VALUE_OPTION_CODE
,COALESCE(br.BALANCE_AMOUNT_BS, 'YTD') BALANCE_AMOUNT_BS
,COALESCE(br.BALANCE_AMOUNT_IS, 'PERIODIC') BALANCE_AMOUNT_IS
FROM AIF_BAL_RULE_LOADS brl
,AIF_TARGET_APPLICATIONS app
,AIF_BALANCE_RULES br
WHERE brl.LOADID = 300
AND app.APPLICATION_ID = brl.APPLICATION_ID
AND br.RULE_ID = brl.RULE_ID
2013-12-31 22:45:07,120 DEBUG [AIF]:
SELECT PERIODKEY
FROM TPOVPERIOD
WHERE PERIODDESC = 'January 2013'
2013-12-31 22:45:07,122 INFO [AIF]:
Import Data from Source for Ledger 'JWR Books'
2013-12-31 22:45:07,125 DEBUG [AIF]:
SELECT COA_SEGMENT_NAME
,ACCOUNT_TYPE_FLAG
,BALANCE_TYPE_FLAG
FROM AIF_COA_SEGMENTS
WHERE SOURCE_SYSTEM_ID = 3
AND SOURCE_COA_ID = '101'
AND (
ACCOUNT_TYPE_FLAG = 'Y'
OR BALANCE_TYPE_FLAG = 'Y'
2013-12-31 22:45:07,127 DEBUG [AIF]:
SELECT adim.BALANCE_COLUMN_NAME DIMNAME
,adim.DIMENSION_ID
,dim.TARGET_DIMENSION_CLASS_NAME
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID1
) COA_SEGMENT_NAME1
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID2
) COA_SEGMENT_NAME2
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID3
) COA_SEGMENT_NAME3
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID4
) COA_SEGMENT_NAME4
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID5
) COA_SEGMENT_NAME5
,(SELECT CASE mdd.ORPHAN_OPTION_CODE
WHEN 'CHILD' THEN 'N'
WHEN 'ROOT' THEN 'N'
ELSE 'Y'
END DIMENSION_FILTER_FLAG
FROM AIF_MAP_DIM_DETAILS_V mdd
,AIF_MAPPING_RULES mr
WHERE mr.PARTITIONKEY = tpp.PARTITIONKEY
AND mdd.RULE_ID = mr.RULE_ID
AND mdd.DIMENSION_ID = adim.DIMENSION_ID
) DIMENSION_FILTER_FLAG
,tiie.IMPCONCATCHAR
FROM TPOVPARTITION tpp
INNER JOIN AIF_TARGET_APPL_DIMENSIONS adim
ON adim.APPLICATION_ID = 26
INNER JOIN AIF_DIMENSIONS dim
ON dim.DIMENSION_ID = adim.DIMENSION_ID
LEFT OUTER JOIN TBHVIMPITEMERPI tiie
ON tiie.IMPGROUPKEY = tpp.PARTIMPGROUP
AND tiie.IMPFLDFIELDNAME = adim.BALANCE_COLUMN_NAME
AND tiie.IMPMAPTYPE = 'ERP'
WHERE tpp.PARTITIONKEY = 12
AND adim.BALANCE_COLUMN_NAME IS NOT NULL
ORDER BY adim.BALANCE_COLUMN_NAME
2013-12-31 22:45:07,154 DEBUG [AIF]:
INSERT INTO TDATASEG_T (
LOADID
,PARTITIONKEY
,CATKEY
,RULE_ID
,PERIODKEY
,VALID_FLAG
,CHANGESIGN
,CODE_COMBINATION_ID
,SOURCE_LEDGER_ID
,GL_PERIOD_YEAR
,GL_PERIOD_NUM
,YEAR
,PERIOD
,ATTR1
,ATTR2
,ATTR3
,ATTR4
,ATTR5
,ATTR6
,ATTR7
,ATTR8
,ATTR9
,ATTR10
,ATTR11
,ATTR12
,ATTR13
,ATTR14
,ACCOUNT
,ACCOUNTX
,ENTITY
,ENTITYX
,ICP
,ICPX
,UD1
,UD1X
,UD2
,UD2X
,UD3
,UD3X
,UD4
,UD4X
,DATAVIEW
,DATAKEY
,STAT_BALANCE_FLAG
,CURKEY
,AMOUNT_PTD
,AMOUNT_YTD
,AMOUNT
,AMOUNTX
SELECT pprd.PROCESS_ID LOADID
,12 PARTITIONKEY
,4 CATKEY
,27 RULE_ID
,pprd.PERIODKEY
,'Y' VALID_FLAG
,0 CHANGESIGN
,ccid.CODE_COMBINATION_ID
,bal.SOURCE_LEDGER_ID
,pprd.GL_PERIOD_YEAR
,pprd.GL_PERIOD_NUM
,pprd.YEARTARGET YEAR
,pprd.PERIODTARGET PERIOD
,pprd.PROCESS_ID ATTR1
,bal.SOURCE_SYSTEM_ID ATTR2
,bal.SOURCE_LEDGER_ID ATTR3
,pprd.GL_PERIOD_YEAR ATTR4
,pprd.GL_PERIOD_NAME ATTR5
,bal.ACTUAL_FLAG ATTR6
,bal.BUDGET_VERSION_ID ATTR7
,bal.ENCUMBRANCE_TYPE_ID ATTR8
,ccid.ACCOUNT_TYPE ATTR9
,NULL ATTR10
,NULL ATTR11
,NULL ATTR12
,NULL ATTR13
,NULL ATTR14
,ccid.SEGMENT4 ACCOUNT
,NULL ACCOUNTX
,ccid.SEGMENT1 ENTITY
,NULL ENTITYX
,NULL ICP
,NULL ICPX
,ccid.SEGMENT5 UD1
,NULL UD1X
,ccid.SEGMENT3 UD2
,NULL UD2X
,ccid.SEGMENT6 UD3
,NULL UD3X
,ccid.SEGMENT2 UD4
,NULL UD4X
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN 'Periodic' ELSE 'YTD' END ) DATAVIEW
,TDATASEG_DATAKEY_S.NEXTVAL
,'N' STAT_BALANCE_FLAG
,bal.CURRENCY_CODE CURKEY
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) * ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR ) AMOUNT_PTD
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) * ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR ) AMOUNT_YTD
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) *
( CASE
WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
ELSE ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
END
AMOUNT
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) *
( CASE
WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
ELSE ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
END
AMOUNTX
FROM AIF_EBS_GL_BALANCES_STG_V bal
,AIF_EBS_GL_CCID_STG ccid
,AIF_PROCESS_PERIODS pprd
WHERE bal.SOURCE_SYSTEM_ID = 3
AND bal.SOURCE_LEDGER_ID = 1
AND bal.ACTUAL_FLAG = 'A'
AND ccid.SOURCE_SYSTEM_ID = bal.SOURCE_SYSTEM_ID
AND ccid.SOURCE_COA_ID = bal.SOURCE_COA_ID
AND ccid.CODE_COMBINATION_ID = bal.CODE_COMBINATION_ID
AND pprd.PROCESS_ID = 300
AND pprd.PERIODKEY = '2013-01-01'
AND pprd.SOURCE_LEDGER_ID = bal.SOURCE_LEDGER_ID
AND pprd.GL_PERIOD_NAME = bal.PERIOD_NAME
AND (
bal.BEGIN_BALANCE_DR <> 0
OR bal.BEGIN_BALANCE_CR <> 0
OR bal.PERIOD_NET_DR <> 0
OR bal.PERIOD_NET_CR <> 0
AND bal.CURRENCY_CODE <> 'STAT'
AND bal.TRANSLATED_FLAG IS NULL
2013-12-31 22:45:09,269 INFO [AIF]: Monetary Data Rows Imported from Source: 12590
2013-12-31 22:45:09,293 DEBUG [AIF]:
INSERT INTO AIF_APPL_LOAD_AUDIT (
LOADID
,TARGET_APPLICATION_TYPE
,TARGET_APPLICATION_NAME
,PLAN_TYPE
,SOURCE_LEDGER_ID
,EPM_YEAR
,EPM_PERIOD
,SNAPSHOT_FLAG
,PARTITIONKEY
,CATKEY
,RULE_ID
,PERIODKEY
,EXPORT_TO_TARGET_FLAG
SELECT DISTINCT PROCESS_ID LOADID
,'HFM' TARGET_APPLICATION_TYPE
,'FMTEST2' TARGET_APPLICATION_NAME
,NULL PLAN_TYPE
,SOURCE_LEDGER_ID
,YEARTARGET EPM_YEAR
,PERIODTARGET EPM_PERIOD
,'Y' SNAPSHOT_FLAG
,12 PARTITIONKEY
,4 CATKEY
,27 RULE_ID
,PERIODKEY
,'N' EXPORT_TO_TARGET_FLAG
FROM AIF_PROCESS_PERIODS
WHERE PROCESS_ID = 300
AND PERIODKEY = '2013-01-01'
AND SOURCE_LEDGER_ID = 1
2013-12-31 22:45:09,297 DEBUG [AIF]:
INSERT INTO AIF_APPL_LOAD_PRD_AUDIT (
LOADID
,SOURCE_LEDGER_ID
,GL_PERIOD_ID
,DELTA_RUN_ID
,PARTITIONKEY
,CATKEY
,RULE_ID
,PERIODKEY
SELECT DISTINCT pprd.PROCESS_ID LOADID
,pprd.SOURCE_LEDGER_ID
,pprd.PERIOD_ID GL_PERIOD_ID
,(SELECT MAX(gl.DELTA_RUN_ID)
FROM AIF_GL_LOAD_AUDIT gl
WHERE gl.SOURCE_SYSTEM_ID = 3
AND gl.SOURCE_LEDGER_ID = pprd.SOURCE_LEDGER_ID
AND gl.BALANCE_TYPE = 'A'
AND gl.GL_PERIOD_ID = pprd.PERIOD_ID
) DELTA_RUN_ID
,12 PARTITIONKEY
,4 CATKEY
,27 RULE_ID
,pprd.PERIODKEY
FROM AIF_PROCESS_PERIODS pprd
WHERE pprd.PROCESS_ID = 300
AND pprd.PERIODKEY = '2013-01-01'
AND pprd.SOURCE_LEDGER_ID = 1
2013-12-31 22:45:09,302 INFO [AIF]:
Total Data Rows Imported from Source: 12590
2013-12-31 22:45:09,305 INFO [AIF]: EBS/FS Load Data - Load TDATASEG_T - END
2013-12-31 22:45:09,381 INFO [AIF]: COMM Update Data - Init DataLoadUtil - START
2013-12-31 22:45:09,385 INFO [AIF]: COMM Update Data - Init DataLoadUtil - END
2013-12-31 22:45:09,485 INFO [AIF]: COMM Update Data - Update TDATASEG_T/TDATASEGW - START
2013-12-31 22:45:09,491 DEBUG [AIF]:
DELETE FROM TDATASEG_T
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND AMOUNT = 0
2013-12-31 22:45:09,559 WARN [AIF]:
Warning: Data rows with zero balances exist
2013-12-31 22:45:09,636 INFO [AIF]: Zero Balance Data Rows Deleted: 1879
2013-12-31 22:45:09,654 DEBUG [AIF]:
SELECT DIMNAME
,CASE WHEN RULE_ID IS NULL THEN 'N' ELSE 'Y' END RULE_MAP_FLAG
,SRCKEY
,TARGKEY
,WHERECLAUSETYPE
,WHERECLAUSEVALUE
,CHANGESIGN
,SEQUENCE
,DATAKEY
,MAPPING_TYPE
FROM (
SELECT DISTINCT tdm.DIMNAME
,tdm.RULE_ID
,NULL SRCKEY
,NULL TARGKEY
,tdm.WHERECLAUSETYPE
,tdm.WHERECLAUSEVALUE
,NULL CHANGESIGN
,1 SEQUENCE
,COALESCE(tdm.SYSTEM_GENERATED_FLAG,'N') SYSTEM_GENERATED_FLAG
,NULL DATAKEY
,CASE
WHEN tdm.WHERECLAUSETYPE IS NULL THEN 1
ELSE 3
END MAPPING_TYPE
FROM TDATAMAP_T tdm
WHERE tdm.LOADID = 300
AND tdm.PARTITIONKEY = 12
AND tdm.TDATAMAPTYPE = 'ERP'
AND (tdm.RULE_ID IS NULL OR tdm.RULE_ID = 27)
AND tdm.WHERECLAUSETYPE IS NULL
UNION ALL
SELECT tdm.DIMNAME
,tdm.RULE_ID
,tdm.SRCKEY
,tdm.TARGKEY
,tdm.WHERECLAUSETYPE
,tdm.WHERECLAUSEVALUE
,tdm.CHANGESIGN
,CASE tpp.PARTSEQMAP
WHEN 0 THEN CASE
WHEN (tdm.WHERECLAUSETYPE = 'MULTIDIM') THEN 2
WHEN (tdm.WHERECLAUSETYPE = 'BETWEEN') THEN 3
WHEN (tdm.WHERECLAUSETYPE = 'LIKE') THEN 4
ELSE 0
END
ELSE tdm.SEQUENCE
END SEQUENCE
,COALESCE(tdm.SYSTEM_GENERATED_FLAG,'N') SYSTEM_GENERATED_FLAG
,tdm.DATAKEY
,CASE
WHEN tdm.WHERECLAUSETYPE IS NULL THEN 1
ELSE 3
END MAPPING_TYPE
FROM TDATAMAP_T tdm
INNER JOIN TPOVPARTITION tpp
ON tpp.PARTITIONKEY = tdm.PARTITIONKEY
WHERE tdm.LOADID = 300
AND tdm.PARTITIONKEY = 12
AND tdm.TDATAMAPTYPE = 'ERP'
AND (tdm.RULE_ID IS NULL OR tdm.RULE_ID = 27)
AND tdm.WHERECLAUSETYPE IN ('MULTIDIM','BETWEEN','LIKE')
) q
ORDER BY DIMNAME
,RULE_ID
,SEQUENCE
,SYSTEM_GENERATED_FLAG
,SRCKEY
2013-12-31 22:45:09,672 INFO [AIF]:
Processing Mappings for Column 'ACCOUNT'
2013-12-31 22:45:09,677 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ACCOUNTX = ACCOUNT
,ACCOUNTR = 121
,ACCOUNTF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ACCOUNTX IS NULL
AND (1=1)
2013-12-31 22:45:10,044 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,053 INFO [AIF]:
Processing Mappings for Column 'ENTITY'
2013-12-31 22:45:10,057 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ENTITYX = ENTITY
,ENTITYR = 122
,ENTITYF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ENTITYX IS NULL
AND (1=1)
2013-12-31 22:45:10,426 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,435 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ENTITYX = ENTITY
,ENTITYR = 132
,ENTITYF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ENTITYX IS NULL
AND (1=1)
2013-12-31 22:45:10,446 INFO [AIF]: Data Rows Updated by Location Mapping 'DEFAULT' (LIKE): 0
2013-12-31 22:45:10,448 INFO [AIF]:
Processing Mappings for Column 'ICP'
2013-12-31 22:45:10,452 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ICPX = '[ICP None]'
,ICPR = 130
,ICPF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[ICP None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ICPX IS NULL
AND (1=1)
2013-12-31 22:45:10,784 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,798 INFO [AIF]:
Processing Mappings for Column 'UD1'
2013-12-31 22:45:10,802 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD1X = '[None]'
,UD1R = 124
,UD1F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD1X IS NULL
AND (1=1)
2013-12-31 22:45:11,134 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,156 INFO [AIF]:
Processing Mappings for Column 'UD2'
2013-12-31 22:45:11,160 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD2X = '[None]'
,UD2R = 123
,UD2F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD2X IS NULL
AND (1=1)
2013-12-31 22:45:11,517 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,531 INFO [AIF]:
Processing Mappings for Column 'UD3'
2013-12-31 22:45:11,535 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD3X = '[None]'
,UD3R = 125
,UD3F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD3X IS NULL
AND (1=1)
2013-12-31 22:45:11,870 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,883 INFO [AIF]:
Processing Mappings for Column 'UD4'
2013-12-31 22:45:11,887 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD4X = '[None]'
,UD4R = 128
,UD4F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD4X IS NULL
AND (1=1)
2013-12-31 22:45:12,192 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:12,204 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ATTR14 = DATAKEY
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:12,739 DEBUG [AIF]:
UPDATE TDATASEG_T
SET VALID_FLAG = 'N'
WHERE 1=1
AND (
(1=0)
OR TDATASEG_T.ACCOUNTX IS NULL
OR TDATASEG_T.ENTITYX IS NULL
OR TDATASEG_T.ICPX IS NULL
OR TDATASEG_T.UD1X IS NULL
OR TDATASEG_T.UD2X IS NULL
OR TDATASEG_T.UD3X IS NULL
OR TDATASEG_T.UD4X IS NULL
AND LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND VALID_FLAG = 'Y'
2013-12-31 22:45:12,754 INFO [AIF]:
Total Data Rows available for Export to Target: 10711
2013-12-31 22:45:12,773 INFO [AIF]: COMM Update Data - Update TDATASEG_T/TDATASEGW - END
2013-12-31 22:45:12,808 INFO [AIF]: COMM End Process Detail - Update Process Detail - START
2013-12-31 22:45:12,823 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'SUCCESS'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 10711
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 300
AND ENTITY_TYPE = 'PROCESS_BAL_TRANS'
AND ENTITY_NAME = 'January 2013'
2013-12-31 22:45:12,829 INFO [AIF]: COMM End Process Detail - Update Process Detail - END
2013-12-31 22:45:12,987 INFO [AIF]: COMM Update YTD Amounts - Update YTD Amounts - START
2013-12-31 22:45:12,993 DEBUG [AIF]:
SELECT brl.PARTITIONKEY
,brl.CATKEY
,pprd.YEARTARGET
,pprd.PERIODTARGET
,pprd.SOURCE_LEDGER_ID
FROM AIF_BAL_RULE_LOADS brl
,AIF_PROCESS_PERIODS pprd
WHERE brl.LOADID = 300
AND pprd.PROCESS_ID = brl.LOADID
GROUP BY brl.PARTITIONKEY
,brl.CATKEY
,pprd.YEARTARGET
,pprd.PERIODTARGET
,pprd.SOURCE_LEDGER_ID
HAVING COUNT(*) > 1
2013-12-31 22:45:12,995 INFO [AIF]: COMM Update YTD Amounts - Update YTD Amounts - END
2013-12-31 22:45:13,052 INFO [AIF]: COMM Load TDATAMAPSEG/TDATASEG - Load TDATAMAPSEG/TDATASEG - START
2013-12-31 22:45:13,057 DEBUG [AIF]:
SELECT brl.PARTITIONKEY
,brl.CATKEY
,brl.EXECUTION_MODE
FROM AIF_BAL_RULE_LOADS brl
WHERE brl.LOADID = 300
2013-12-31 22:45:13,059 DEBUG [AIF]:
SELECT PERIODKEY
FROM AIF_APPL_LOAD_AUDIT
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND RULE_ID = 27
ORDER BY PERIODKEY
2013-12-31 22:45:13,061 INFO [AIF]:
Processing Data for PeriodKey '2013-01-01'
2013-12-31 22:45:13,065 DEBUG [AIF]:
DELETE FROM TDATAMAPSEG
WHERE PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND (
TDATAMAPTYPE = 'ERP'
OR (
TDATAMAPTYPE = 'MULTIDIM'
AND EXISTS (
SELECT 1
FROM TDATAMAPSEG parent
WHERE parent.PARTITIONKEY = TDATAMAPSEG.PARTITIONKEY
AND parent.DATAKEY = TDATAMAPSEG.TARGKEY
AND parent.CATKEY = TDATAMAPSEG.CATKEY
AND parent.PERIODKEY = TDATAMAPSEG.PERIODKEY
AND parent.TDATAMAPTYPE = 'ERP'
2013-12-31 22:45:13,074 INFO [AIF]: Number of Rows deleted from TDATAMAPSEG: 8
2013-12-31 22:45:13,077 DEBUG [AIF]:
INSERT INTO TDATAMAPSEG (
DATAKEY
,PARTITIONKEY
,CATKEY
,PERIODKEY
,DIMNAME
,SRCKEY
,SRCDESC
,TARGKEY
,WHERECLAUSETYPE
,WHERECLAUSEVALUE
,CHANGESIGN
,SEQUENCE
,VBSCRIPT
,TDATAMAPTYPE
,SYSTEM_GENERATED_FLAG
SELECT DATAKEY
,PARTITIONKEY
,4
,'2013-01-01'
,DIMNAME
,SRCKEY
,SRCDESC
,TARGKEY
,WHERECLAUSETYPE
,WHERECLAUSEVALUE
,CHANGESIGN
,SEQUENCE
,VBSCRIPT
,TDATAMAPTYPE
,SYSTEM_GENERATED_FLAG
FROM TDATAMAP_T
WHERE LOADID = 300
2013-12-31 22:45:13,081 INFO [AIF]: Number of Rows inserted into TDATAMAPSEG: 8
2013-12-31 22:45:13,083 DEBUG [AIF]:
DELETE FROM TDATASEG
WHERE LOADID < 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND RULE_ID = 27
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:15,659 INFO [AIF]: Number of Rows deleted from TDATASEG: 10711
2013-12-31 22:45:15,728 DEBUG [AIF]:
INSERT INTO TDATASEG (
DATAKEY
,PARTITIONKEY
,CATKEY
,PERIODKEY
,CURKEY
,DATAVIEW
,CALCACCTTYPE
,CHANGESIGN
,JOURNALID
,AMOUNT
,AMOUNTX
,AMOUNT_PTD
,AMOUNT_YTD
,DESC1
,DESC2
,ACCOUNT
,ACCOUNTX
,ACCOUNTR
,ACCOUNTF
,ENTITY
,ENTITYX
,ENTITYR
,ENTITYF
,ICP
,ICPX
,ICPR
,ICPF
,UD1
,UD1X
,UD1R
,UD1F
,UD2
,UD2X
,UD2R
,UD2F
,UD3
,UD3X
,UD3R
,UD3F
,UD4
,UD4X
,UD4R
,UD4F
,UD5
,UD5X
,UD5R
,UD5F
,UD6
,UD6X
,UD6R
,UD6F
,UD7
,UD7X
,UD7R
,UD7F
,UD8
,UD8X
,UD8R
,UD8F
,UD9
,UD9X
,UD9R
,UD9F
,UD10
,UD10X
,UD10R
,UD10F
,UD11
,UD11X
,UD11R
,UD11F
,UD12
,UD12X
,UD12R
,UD12F
,UD13
,UD13X
,UD13R
,UD13F
,UD14
,UD14X
,UD14R
,UD14F
,UD15
,UD15X
,UD15R
,UD15F
,UD16
,UD16X
,UD16R
,UD16F
,UD17
,UD17X
,UD17R
,UD17F
,UD18
,UD18X
,UD18R
,UD18F
,UD19
,UD19X
,UD19R
,UD19F
,UD20
,UD20X
,UD20R
,UD20F
,ATTR1
,ATTR2
,ATTR3
,ATTR4
,ATTR5
,ATTR6
,ATTR7
,ATTR8
,ATTR9
,ATTR10
,ATTR11
,ATTR12
,ATTR13
,ATTR14
,ARCHIVEID
,HASMEMOITEM
,STATICDATAKEY
,LOADID
,RULE_ID,
CODE_COMBINATION_ID
,STAT_BALANCE_FLAG
,VALID_FLAG
SELECT
DATAKEY
,PARTITIONKEY
,CATKEY
,PERIODKEY
,CURKEY
,DATAVIEW
,CALCACCTTYPE
,CHANGESIGN
,JOURNALID
,AMOUNT
,AMOUNTX
,AMOUNT_PTD
,AMOUNT_YTD
,DESC1
,DESC2
,ACCOUNT
,ACCOUNTX
,ACCOUNTR
,ACCOUNTF
,ENTITY
,ENTITYX
,ENTITYR
,ENTITYF
,ICP
,ICPX
,ICPR
,ICPF
,UD1
,UD1X
,UD1R
,UD1F
,UD2
,UD2X
,UD2R
,UD2F
,UD3
,UD3X
,UD3R
,UD3F
,UD4
,UD4X
,UD4R
,UD4F
,UD5
,UD5X
,UD5R
,UD5F
,UD6
,UD6X
,UD6R
,UD6F
,UD7
,UD7X
,UD7R
,UD7F
,UD8
,UD8X
,UD8R
,UD8F
,UD9
,UD9X
,UD9R
,UD9F
,UD10
,UD10X
,UD10R
,UD10F
,UD11
,UD11X
,UD11R
,UD11F
,UD12
,UD12X
,UD12R
,UD12F
,UD13
,UD13X
,UD13R
,UD13F
,UD14
,UD14X
,UD14R
,UD14F
,UD15
,UD15X
,UD15R
,UD15F
,UD16
,UD16X
,UD16R
,UD16F
,UD17
,UD17X
,UD17R
,UD17F
,UD18
,UD18X
,UD18R
,UD18F
,UD19
,UD19X
,UD19R
,UD19F
,UD20
,UD20X
,UD20R
,UD20F
,ATTR1
,ATTR2
,ATTR3
,ATTR4
,ATTR5
,ATTR6
,ATTR7
,ATTR8
,ATTR9
,ATTR10
,ATTR11
,ATTR12
,ATTR13
,ATTR14
,ARCHIVEID
,HASMEMOITEM
,STATICDATAKEY
,LOADID
,RULE_ID,
CODE_COMBINATION_ID
,STAT_BALANCE_FLAG
,VALID_FLAG
FROM TDATASEG_T
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:16,838 INFO [AIF]: Number of Rows inserted into TDATASEG: 10711
2013-12-31 22:45:16,858 DEBUG [AIF]:
DELETE FROM TDATASEG_T
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:17,123 INFO [AIF]: Number of Rows deleted from TDATASEG_T: 10711
2013-12-31 22:45:17,153 DEBUG [AIF]:
DELETE FROM TDATAMAP_T
WHERE LOADID = 300
2013-12-31 22:45:17,156 INFO [AIF]: Number of Rows deleted from TDATAMAP_T: 8
2013-12-31 22:45:17,161 INFO [AIF]: COMM Load TDATAMAPSEG/TDATASEG - Load TDATAMAPSEG/TDATASEG - END
2013-12-31 22:45:17,993 DEBUG [AIF]:
SELECT CASE app.METADATA_LOAD_METHOD
WHEN 'EPMA' THEN CASE dim.TARGET_DIMENSION_CLASS_NAME
WHEN 'Generic' THEN dim.TARGET_DIMENSION_NAME
ELSE dim.TARGET_DIMENSION_CLASS_NAME
END
ELSE dim.TARGET_DIMENSION_NAME
END TARGET_DIMENSION_NAME
,adim.BALANCE_COLUMN_NAME
FROM AIF_TARGET_APPLICATIONS app
,AIF_TARGET_APPL_DIMENSIONS adim
,AIF_DIMENSIONS dim
WHERE app.APPLICATION_ID = 26
AND adim.APPLICATION_ID = app.APPLICATION_ID
AND dim.DIMENSION_ID = adim.DIMENSION_ID
AND dim.TARGET_DIMENSION_CLASS_NAME IN ('Custom1','Custom2','Custom3','Custom4','Generic')
2013-12-31 22:45:17,997 DEBUG [AIF]:
SELECT SCENARIO "Scenario"
,YEAR "Year"
,PERIOD "Period"
,DATAVIEW "View"
,DATAVALUE "Value"
,ACCOUNT "Account"
,ENTITY "Entity"
,ICP "ICP"
,UD2 "Area"
,UD1 "Tail"
,UD3 "Special"
,UD4 "Facility"
,AMOUNT "DataValue"
FROM AIF_HS_BALANCES
WHERE LOADID = 300
2013-12-31 22:45:18,000 INFO [SimpleAsyncTaskExecutor-9]: ODI Hyperion Financial Management Adapter
2013-12-31 22:45:18,002 INFO [SimpleAsyncTaskExecutor-9]: Load task initialized.
2013-12-31 22:45:18,028 INFO [AIF]: LKM COMM Load Data into HFM - Load Data to HFM - START
2013-12-31 22:45:18,031 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_DETAILS (
PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,TARGET_TABLE_NAME
,EXECUTION_START_TIME
,EXECUTION_END_TIME
,RECORDS_PROCESSED
,STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
) VALUES (
300
,'PROCESS_BAL_EXP_HFM'
,NULL
,'FMTEST2'
,NULL
,NULL
,CURRENT_TIMESTAMP
,NULL
,NULL
,'RUNNING'
,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
,CURRENT_TIMESTAMP
2013-12-31 22:45:18,034 INFO [SimpleAsyncTaskExecutor-9]: Connecting to Financial Management application [FMTEST2] on [10.150.20.40] using user-name [admin].
2013-12-31 22:45:18,155 INFO [SimpleAsyncTaskExecutor-9]: Connected to Financial Management application.
2013-12-31 22:45:18,157 INFO [SimpleAsyncTaskExecutor-9]: HFM Version: 11.1.2.2.300.
2013-12-31 22:45:18,160 INFO [SimpleAsyncTaskExecutor-9]: Options for the Financial Management load task are:
<Options>
<Option name=LOG_FILE_NAME value=C:\Windows\TEMP\/aif_501_300.log/>
<Option name=IMPORT_MODE value=Replace/>
<Option name=CONSOLIDATE_ONLY value=false/>
<Option name=CONSOLIDATE_PARAMETERS value=""/>
<Option name=LOG_ENABLED value=true/>
<Option name=ACCUMULATE_WITHIN_FILE value=false/>
<Option name=DEBUG_ENABLED value=true/>
<Option name=CONSOLIDATE_AFTER_LOAD value=false/>
<Option name=FILE_CONTAINS_SHARE_DATA value=false/>
</Options>
2013-12-31 22:45:18,168 INFO [SimpleAsyncTaskExecutor-9]: Load Options validated.
2013-12-31 22:45:18,176 ERROR [SimpleAsyncTaskExecutor-9]: Error occurred during load process ORA-00904: "DATAVALUE": invalid identifier
com.hyperion.odi.common.ODIHAppException: ORA-00904: "DATAVALUE": invalid identifier
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:216)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
at org.python.core.PyObject.__call__(PyObject.java:355)
at org.python.core.PyMethod.__call__(PyMethod.java:215)
at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
at org.python.core.PyMethod.__call__(PyMethod.java:206)
at org.python.core.PyObject.__call__(PyObject.java:397)
at org.python.core.PyObject.__call__(PyObject.java:401)
at org.python.pycode._pyx161.f$0(<string>:98)
at org.python.pycode._pyx161.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1889)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:580)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$StartScenTask.doExecute(StartScenRequestProcessor.java:1066)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:724)
Caused by: java.sql.SQLSyntaxErrorException: ORA-00904: "DATAVALUE": invalid identifier
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:942)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1690)
at oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:446)
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:212)
... 38 more
2013-12-31 22:45:18,208 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'FAILED'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 0
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 300
AND ENTITY_TYPE = 'PROCESS_BAL_EXP_HFM'
AND ENTITY_NAME = 'FMTEST2'
2013-12-31 22:45:18,210 FATAL [AIF]: Error in LKM CThe issue is that you are mapping "Data Value" to amount in the Target Application import format:
SELECT SCENARIO "Scenario"
,YEAR "Year"
,PERIOD "Period"
,DATAVIEW "View"
,DATAVALUE "Value"
,ACCOUNT "Account"
,ENTITY "Entity"
,ICP "ICP"
,UD2 "Area"
,UD1 "Tail"
,UD3 "Special"
,UD4 "Facility"
,AMOUNT "DataValue"
FROM AIF_HS_BALANCES
WHERE LOADID = 300
You need to map AMOUNT to "AMOUNT" in the HFM Application. Check that the dimension mapping is correct for the class in the target application and that your import format is going to the proper target dimension(Amount). -
Process chain Error: This AND process is not waiting for event RSPROCESS
Hi All,
I am facing an error in the process chain in PRD.
Error message: This AND process is not waiting for event RSPROCESS.
We had a process chain which had two sub chains which run parallel and below of this we had AND process type and below of the AND process we had 4 more jobs.
Once the two subchains got successfully loaded, the and process should turn to green and further 4 jobs should start.
It is a daily load , it worked fine from past years,but suddenly the AND processtype is getting failed.The thing is in the two subchains if one got completed, the AND process process is not waiting for 2nd subchain to get completed.The AND process is turning to RED (status: cancelled) . I tried to repeat the AND process once after above 2 subchains loaded, but it didnt worked.
And i removed the existing AND process and created a new one and placed it in same place and activated and schedules again.but still it is getting failed with same error.
Thanks in advance,
Sai Chand.SHi,
If you did any transports related to that metachain we face similar kind of issues.
not only the AND process , we need to remove all the process before executing the AND process and create it again.
It helps you, you said your in production So you should take the proper approvals and do it.
Regards,
Yerrabelli. -
Error message during processing in BI
1.i am loading the data into infoobject.
2.got error in text data load.
3.master info object have compound obj 0COUNTRY
4.and other normal fields are 0TXTSH,0LANGU,sold-to-party.
5.there is no PSA in this..its direct update to INFOobject.
The error message is:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update
Diagnosis
There are duplicates of the data record 2. with the key '3.' for characteristic 1..
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.Hi KP,
In the details tab,
1.under Transfer (IDOC and Trfc):
Data Package 1 : arrived in BW ; Processing : Error records written to application log
2.Processing (data packet): Errors occurred
Update ( 0 new / 0 changed ) : Errors occurred
Error records written to application log
0TRZONE : Data record 1 ('0000000001D ') : Duplicate data record
0TRZONE : Data record 2 ('0000000002D ') : Duplicate data record
Error 4 in the update
3. Process chain error
these are the error details. -
Error in Loading FIGL data into a standard ODS
Hi,
I have encountered an error when i attempted to load FIGL data into a standard ODS. Below is the error i received:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Second step in the update
Second step in the update
Second step in the update
Second step in the update
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Initially i discovered a work around wherein i loaded the data into a write optimize ODS. It was successful. However, when i attempted to data mart the data and put it into a standard ODS, the similar error occurred.
Please help me with this problem.
RamonHi,
Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the new data table.
Thanks,
JituK -
'Error in Loading Master -Text data'
hi Experts,
i am Novice in BW Tech. Today i have tries to Load Master data Attr and Text from Flat file(CSV ) format .
AttrData Load was Successful but I My Text is failed to Load.
My Text Data file has Three fields
(1) Langu for this filed i have Loaded data 'E'
(2) Materailnumber it is my key field it size is char
15 and values in the file 'MAT01' ' MAT02 ' and so on
(3) Third is the Description and its size 20 char
I can see following error
First field 'langu' is successful in loading.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Advance thanks
Cheers,
AnilHi Nagesh ,
These are the Messages
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
In Preview only Language Fields 'E" filled
Remaining two fields are Empty.
I remained you Transfer rules are Ok
Thanks -
500 Internal Server Error Failed to process request in portal
Hi ,* We face problems to run Dev and Qual systems on our Sap portal devices. Production is OK The error message (see hereafter) does not occur on welcome page but on any page that communicate by Web Dynpro with ECC SAP system 500 Internal Server Error SAP NetWeaver Application Server 7.00/Java AS 7.00 Failed to process request. Please contact your system administrator. [Hide] Error Summary While processing the current request, an exception occured which could not be handled by the application or the framework. If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, ... com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WS metadata destination 'SSOL_WS_METADATA_DEST' and WS interface 'ZGetListCustomerAgent'. One possible reason is that the metadata destination 'SSOL_WS_METADATA_DEST' has not been properly configured; check configuration. at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:440) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.readOperationsFromWSDL(WSModelInfo.java:372) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadataInternal(WSModelInfo.java:342) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:326) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo$Cache.getModelInfo(WSModelInfo.java:199) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getModelInfoFromCacheOrCreate(WSModelInfo.java:1035) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getModelInfoFromCacheOrCreate(WSModelInfo.java:248) at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModel.(WSTypedModel.java:41) at com.bluestarsilicones.ssol.models.customer.WS_GetListCustomersForAgentModel.(WS_GetListCustomersForAgentModel.java:53) at com.bluestarsilicones.ssol.wd.ordercreation.OrderCreationComponent.initalListCustomerAgentModel(OrderCreationComponent.java:587) at com.bluestarsilicones.ssol.wd.ordercreation.OrderCreationComponent.initalModels(OrderCreationComponent.java:555) at com.bluestarsilicones.ssol.wd.ordercreation.OrderCreationComponent.wdDoInit(OrderCreationComponent.java:193) at com.bluestarsilicones.ssol.wd.ordercreation.wdp.InternalOrderCreationComponent.wdDoInit(InternalOrderCreationComponent.java:943) at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108) at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215) at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200) at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430) at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:783) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:303) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73) at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869) at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229) at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344) at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356) at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549) at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:193) at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150) at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108) at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215) at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200) at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430) at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:783) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:303) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model. See nested exception for details. at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:157) at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.(DGenericServiceImpl.java:56) at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:88) at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:141) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:429) ... 60 more Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Proxy generation problem. See nested exception. at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:284) at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:154) ... 64 more Caused by: java.io.IOException: Compilation fails... Compilation process error : Not enough space at com.sap.engine.services.webservices.jaxrpc.util.Compiler.compile(Compiler.java:53) at com.sap.engine.services.webservices.jaxrpc.util.PackageBuilder.compileExternal(PackageBuilder.java:328) at com.sap.engine.services.webservices.jaxrpc.util.PackageBuilder.traversThrough(PackageBuilder.java:291) at com.sap.engine.services.webservices.jaxrpc.util.PackageBuilder.compileExternal(PackageBuilder.java:485) at com.sap.engine.services.webservices.jaxrpc.util.PackageBuilder.compilePackage(PackageBuilder.java:215) at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:271) ... 65 more Thanks for your help. TY.
Hi,
I think you are accessing the portal via one of the dialog instance and not using the Central instance.So you are not getting the error displayed in iview. If you want to activate navigate to system administration-system configuration-services and in portal runtime central configuration open the object and in portal .runtime .print cause .exception make it to true and restart the service. This may be for print but some where here in the services you can activate that.
For productive environment detailed exception is not recommended.Administrator can see the error log in
log files.
Thanks and regards,
gopal.sattiraju -
Hi All,
I am getting error while loading POS Data i.e 0RT_PA_TRAN_CONTROL..
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Error is: Update mode When Others is not supported by the extraction API
Long Text:
Update mode When Others is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using
update mode When Others. However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
And also Please can anybody tell me what is the Update Mode i have to use in BI7 if our Data Source being loaded in other target with Delta Upload..?
Your help will be appreciated..
Regards,
Kiran TelkarHi,
Caller 09 is basically Memory related error. Ask your BASIS to increase the size.
Also check in the error log, the user ID u r using should have the proper authorization. -
Error While loading data for LIS InfoSources.
Hi All,
I am repeatedly receiving load failure errors while loading data using 2lis_01_s001 (This is the case with all the InfoSources).
The error message is:
An error occurred in the source system.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
in our Quality system, we disabled the LIS Updation to No Update(R3) and loaded data and then again changed the Update Mode for No Updating to Asynchronous Update(R3). But now we are doing dataloading in Production. How to proceed. Should we have to disable the LIS Updating whenever we have to load the loads from R3 to BW.
Regards
JayHi Jayanthy,
Pls. check the order of the fields in the two set up tables for the S001 structure. The order of fields in both the tables should be the same.
You can see the structure in the TCode - SE11.
If the order is different, then you bneed to ask the BASIS person to change the order so that the order of fields in both the setup tables is same. This should fix the issue.
Thanks,
Raj
Maybe you are looking for
-
Where are my pictures from iPhoto?
Where did all of my pictures from iPhoto go? I can't find them on my Mac? How do I download my pictures from my iPhone? If I can't download pictures from my iPhone then Apple just killed part of the reason I have an iPhone in the first place. Fix it.
-
Is it possible to remove the white borders that appear on all my import and export images? The white interferes with what I am reviewing in folders on my desktop and in Aperture. Would rather have just a solid neutral color around them. Thank you.
-
I just posted a message asking about filtering on metadata, but I didn't want to confuse that thread with this second question: Can I sort on metadata? For example, can I sort on "Date Time Original"? I know I can sort on "Date Created," but that's n
-
BRAND NEW Mac Pro won't boot from Leopard DVD, kernel panics!
I just received my brand new Mac Pro today. It's a BTO machine with the upgrade to the NVIDIA 8800GT, a second optical drive and a Mac OS X Server license. The system has Mac OS X server installed on the default 320GB drive. I decided to use the serv
-
Opening a web address though a java file help
Hello, I am currently creating a game, made in java. I have a game website but i want to make it so that when someone clicks on an item or object in the game, it starts the default web browser and opens our website. I have no idea how to do this as i