Error in maintaining data in V_T510P Premium table

Hi All,
When I try to maintain the data in maintenance view V_T510P, it is giving an error message "Entry USD does not exist in T500W - check your entry". Though currency maintained in table T500W, still the error comes. Please help.
Regards,
Jeetu

Hi,
Check whether its maintained in the table T001.
Regards,
Rahul Wagh

Similar Messages

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Error while retrieving data from PL/SQL Table using SELECT st. (Urgent!!!)

Hi Friends,
I am using Oracle 8.1.6 Server, & facing problems while retrieving data from a PL/SQL Table:
CREATE or REPLACE PROCEDURE test_proc IS
TYPE tP2 is TABLE of varchar2(10); --declared a collection
dt2 tP2 := tP2('a','b','c');
i NUMBER(8);
begin
SELECT COUNT(*) INTO i FROM TABLE(CAST(dt2 as tP2));
DBMS_OUTPUT.PUT_LINE('**'||i);
end;
While executing the above procedure, I encountered foll. error:
ERROR at line 1:
ORA-00600: internal error code, arguments: [15419], [severe error during PL/SQL execution], [], [],
ORA-06544: PL/SQL: internal error, arguments: [pfrrun.c:pfrbnd1()], [], [], [], [], [], [], []
ORA-06553: PLS-801: internal error [0]
Can anyone please help me, where the problem is??
Is it Possible to retrieve data from PL/SQL TABLE using SELECT statement? & How ?
Thanks in advance.
Best Regards,
Jay Raval.

Thanks Roger for the Update.
It means that have to first CREATE TYPE .. TABLE in database then only I can fire a Select statement on that TYPE.
Actually I wanted to fire a Select statement on the TABLE TYPE, defined & declared in PLSQL stored procedure using DECLARE TYPE .. TABLE & not using CREATE TYPE .. TABLE.
I was eager to know this, because my organization is reluctant in using CREATE TYPE .. TABLE defined in the database, so I was looking out for another alternative to access PL/SQL TABLE using Select statement without defining it database. It would have been good if I could access a PLSQL TABLE using Select statement Declared locally in the stored procedure.
Can I summarize that to access a PL/SQL TABLE using SELECT statement, I have to first CREATE TYPE .. TABLE?
If someone have any other idea on this, please do let me know.
Thanks a lot for all help.
Best Regards,
Jay Raval.
You have to define a database type...
create type tP2 is table of varchar2(10)
CREATE OR REPLACE PROCEDURE TEST_PROC
IS
dt2 tP2 := tP2('a','b','c');
i NUMBER(8);
begin
SELECT COUNT(*) INTO i FROM TABLE(CAST (dt2 AS tP2));
DBMS_OUTPUT.PUT_LINE('**'||i);
end;
This will work.
Roger

Java.lang.OutOfMemory error while retrieving data from a large table

Hi,
i am trying to fetch data using "executeQuery()" into a ResultSet from the database. But since the data in that table is large. i am recieving "java.lang.OutOfMemory" Error. So, to resolve that, i have used "setMaxRows()" for my statement object. This resolved the error but i don't recieve the entire data. If i call "executeQuery()" again, i recieve the same data. I don't even know a filtering criterion where by i can filter the data for each "executeQuery()"..
How can i resolve this problem
Thanx in advance
--Chaitanya

Either use some criteria you develop related to one of the keys on the table or use some sort of record limiting method.
Note the method of limiting will vary related to the database you are using. You will have to look at the documentation.
For example I am told this will work in MySQL to get 200 records starting at record 100.
SELECT * FROM myTable ORDER BY whatever ASC LIMIT 100,200
Because you are running out of memroy I assume the table is large,
I am not sure what the impact of the above will have on performance because if in the above if the order by is not based on an index at the server level all the records will be selected and sorted before the records are limited.
I would make sure you have an appropriate index.
If you use the advanced search over the user forums using "resultset paging" and possibility the database you are using you should be able to get some ideas.
I hope this makes sense to you.
rykk

Error when insert data in Sql Server table(DateTime data type)

Hello all,
I have created a database link in oracle 11g to SQL Server 2008 using Sqlserver gateway for oracle,Oracle run on Linux and SQL Server run on Windows platform.
I have queried a table and it fetches rows from the target table.
I am using this syntax for insert a row in Sql Server table.
Insert into Prod@sqlserver (NUMITEMCODE, NUMPREOPENSTOCK, NUMQNTY, NUMNEWOPENSTOCK, DATPRODDATE , TXTCOMPANYCODE, "bolstatus", NUMRESQNTY )
Values (1118 , 1390.0 , 100.0 ,1490 , '2012-06-23 12:37:58.000','SFP' ,0 , 0 );
but it give me error on DATPRODDATE,The data type of DATPRODDATE column in Sql Server is DATETIME.
My Question is how can i pass the date values in INSERT statement for Sql Server DateTime data type.
Regards

Just as with Oracle, you have to specify the date using the to_date() function or use the native date format for the target database (if you can figure out what that is). This is good practice anyway and a good habit to get into.

Error while extracting data from Generic VBAK Table

Hi,
When i am extracting data from VBAK using generic extraction via tavle, i am, getting the error "Syntax error in program "SAPLXRSA ""
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLRSAP" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLXRSA " in include "ZXRSAU01
     " in
    line 159:
    "The type of the database table and work area (or internal table) "L_ST"
    "R_CE1IDEA" are not Unicode convertible. ."
Please help me out in fixing this,
Thansk,

do you have an user-exit? if yes, post the code....
did you try regenerating the entire stuff (ds, structure,...)...there might be a mismatch between the structures of datasource and the generated extraction program....
M.

BAPI to Maintain data in tcode WB0n/table WRF6

Hi,
Is there a BAPI to maintain the data in transaction WB0n or table WRF6? I find the standard tcode WBTI/E that may do the job, is it still supported by SAP?
thanks,
J.Wong
Edited by: JIWONG on Aug 9, 2011 12:19 AM

Hi
I think that it's not possible. The most similar that I have found is BAPI_RETAILSITE_GETMATGROUPS, that call the FM LOCATION_MERCHGROUPS_WITH_TEXT that read in WRF6, but not to mantain it.
I'm sorry
Regards
Eduardo

Error in Import data in oracle 11g table

I have a table with structure as
SQL> desc PSACTIVIMG
Name Null? Type
ACTIVITYNAME NOT NULL VARCHAR2(30 CHAR)
SEQNO NOT NULL NUMBER(38)
PSIMAGEVER NOT NULL NUMBER(38)
IMGSEG BLOB
when the script try to insart data into this table ,after 5 row it fails and rollback all 5 row . i have taken a trace file for the same
4-168 17.30.24 0.000000 Cur#1.3396.HRGOV RC=0 Dur=0.000000 Disconnect
4-169 17.30.24 0.015000 Cur#1.3396.notSamTran RC=0 Dur=0.000000 Open Cursor Handle=04558628
4-170 17.30.24 0.000000 Cur#1.3396.HRGOV RC=0 Dur=0.000000 COM Stmt=INSERT INTO PSACTIVIMG (ACTIVITYNAME, SEQNO, PSIMAGEVER, IMGSEG) VALUES (:1, :2, :3, :4)
4-171 17.30.24 0.000000 Cur#1.3396.HRGOV RC=0 Dur=0.000000 Bind-1 type=2 length=30 value=Create Reqs for Open Positions
4-172 17.30.24 0.000000 Cur#1.3396.HRGOV RC=0 Dur=0.000000 Bind-2 type=19 length=1 value=0
4-173 17.30.24 0.000000 Cur#1.3396.HRGOV RC=0 Dur=0.000000 Bind-3 type=19 length=1 value=1
4-174 17.30.24 0.000000 Cur#1.3396.HRGOV RC=0 Dur=0.000000 Bind-4 type=23 length=2531 LONG BINARY DATA
4-175 17.30.24 0.082000 Cur#1.3396.HRGOV RC=0 Dur=0.000000 Bind-1 type=2 length=17 value=Create W-2 Output
4-176 17.30.24 0.000000 Cur#1.3396.HRGOV RC=0 Dur=0.000000 Bind-2 type=19 length=1 value=0
4-177 17.30.24 0.000000 Cur#1.3396.HRGOV RC=0 Dur=0.000000 Bind-3 type=19 length=1 value=1
4-178 17.30.24 0.000000 Cur#1.3396.HRGOV RC=0 Dur=0.000000 Bind-4 type=23 length=18170 LONG BINARY DATA
2-5712 17.30.28 7.093000 Tuxedo session opened { DisconnectAll at044AE780, pid=2524}
4-179 17.30.43 18.808000 Cur#1.3396.HRGOV RC=3114 Dur=0.006000 Rollback
4-180 17.30.43 0.000000 Cur#1.3396.HRGOV RC=0 Dur=0.000000 Disconnect
4-181 17.30.55 11.760000 Cur#1.3396.notSamTran RC=0 Dur=0.000000 Open Cursor Handle=04558628
4-182 17.30.55 0.000000 Cur#1.3396.HRGOV RC=3114 Dur=0.000000 Commit
4-183 17.30.55 0.001000 Cur#1.3396.HRGOV RC=3114 Dur=0.001000 Rollback
4-184 17.30.55 0.000000 Cur#1.3396.HRGOV RC=0 Dur=0.000000 Disconnect
4-185 17.30.56 1.544000 Cur#1.3396.HRGOV RC=8002 Dur=0.000000 Disconnect
How to overcome this problem, please suggest some way .

As long as I remember, you first have to insert empty_blob() and then update it.
Check out these links:
http://www.orafaq.com/wiki/BLOB
http://arjudba.blogspot.com/2008/06/how-to-insert-blob-dataimage-video-into.html
http://www.herongyang.com/JDBC/Oracle-BLOB-SQL-INSERT.html
Or you can just Google it...
:p

SSIS 2012 is intermittently failing with below "Invalid date format" while importing data from a source table into a Destination table with same exact schema.

We migrated Packages from SSIS 2008 to 2012. The Package is working fine in all the environments except in one of our environment.
SSIS 2012 is intermittently failing with below error while importing data from a source table into a Destination table with same exact schema.
Error: 2014-01-28 15:52:05.19
   Code: 0x80004005
   Source: xxxxxxxx SSIS.Pipeline
   Description: Unspecified error
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC0202009
   Source: Process xxxxxx Load TableName [48]
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid date format".
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC020901C
   Source: Process xxxxxxxx Load TableName [48]
   Description: There was an error with Load TableName.Inputs[OLE DB Destination Input].Columns[Updated] on Load TableName.Inputs[OLE DB Destination Input]. The column status returned was: "Conversion failed because the data value overflowed
the specified type.".
End Error
But when we reorder the column in "Updated" in Destination table, the package is importing data successfully.
This looks like bug to me, Any suggestion?

Hi Mohideen,
Based on my research, the issue might be related to one of the following factors:
Memory pressure. Check there is a memory challenge when the issue occurs. In addition, if the package runs in 32-bit runtime on the specific server, use the 64-bit runtime instead.
A known issue with SQL Native Client. As a workaround, use .NET data provider instead of SNAC.
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Error while Loading data through .csv file

Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak

1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak

Error in the Data Transfer phase

Dear all,
During the Data Transfer phase, we get 117 errors.
The error for each failed process is:
Execution of program /1CADMC/OLC_500000000043327 failed, return code 3
Message no. DMC_RT_MSG046
RC = 3: Error writing the data
I compared the table structures in source and target system, and they are the same.
Therefore I suspect that something went wrong during the Data Selection phase.
Does anyone else have this problem?

Hi Nicolas,
Error code 3 suggests that there was a problem writing data to the receiver system. This may happen due to various reasons (For example: No tablespace available in the target system). To be sure, please check the System Logs (SM21) and Error Logs (ST22).
In oder to check if something went wrong during data selection, you may refer to the selection logs for the tables for which data transfer is aborted.
In case you are not able to identify the issue, kindly open an OSS Message for faster resolution of the problem.
Regards,
Suman

Sequence error: No more data to read from socket

We are getting the following error when inserting data into the center table. What does this error mean? We noticed if we take sequencing off the second table we do not get the error. ARe triggers for sequence are as follows.
begin
select db.insequence.nextval into :new.id from dual;
end;
begin
select db.centerseq.nextval into :new.id from dual;
end;
Thanks in advance.

Narsimha (guest) wrote:
: I am getting the following error:
: "No more data to read from Socket"
: I am using Oracle 8.0.3 + Jdk 1.1.5 + JDBC Driver 7.3.3.1.3
: Follwing is my simple program. I got struck here.
: <<< Please provide me the solution. >>>
: import java.sql.*;
: class JDBCTest{
: public static void main (String args []) throws SQLException,
: ClassNotFoundException{
: Class.forName ("oracle.jdbc.driver.OracleDriver");
: Connection conn =DriverManager.getConnection
: ("jdbc:oracle:thin:@myHost:1521:orcl","scott", "tiger");
: Statement stmt = conn.createStatement ();
: ResultSet rset = stmt.executeQuery ("select * from
FDMainList");
: while (rset.next ())
: System.out.println (rset.getString (1));
I have the same problem with thin jdbc driver against 8.0.3
server.
Try to use oci8 driver - You have to install sql*net8 client
first. It works for me.
Looking at:
http://technet.oracle.com/tech/java/access/info/jdbc_faq.htm#_1_
I think no thin driver supports 8.0.3 unfortunately.
null

BW Datasource and DBConnect with Oracle - Error while Loading Data

Hi,
I have made a DBconnect to Oracle Db and made a datasource for the same.
When I do R Click - Additional Properties - Select Database table - and select one table/view and do"Display Table Properties"
I am able to see the data/records.
After generating the datasource for that table/view and making Infopackage on the same and executing it I get the
following error
"System Response
Caller 09 contains an error message."
"Unknown error while uploading data from the DB table"
"Error in Source System"
Regards,
Surya Kumar

Hi Kumar:
Please check if the SAP below is applicable to your system.
Note 1062350 - "Error when migrating DB connect DataSources"
Regards,
Francisco Milán.

How to select the data from a Maintainance View into an internal table

Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.

HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Error in maintaining data in V_T510P Premium table

Similar Messages

Maybe you are looking for