ERROR IN OUTPUR ALV GRID DISPLAY

Dear all,
can any one please analyse this below code and tell me where i did mistake, i am getting output only from it_tab1,
please any one solve this problem.
Thanks,
sujith.
<Garbled code removed>
Edited by: Suhas Saha on Aug 7, 2011 11:20 AM

Similar Messages

Error in field catalog in ALV grid display using classes at do_sum = "X'.

Hi,
I'm using classes in ALV Grid display.
the code for the field catalog is going to dump because of the statement in the field catalog for field 'netwr',do_sum = 'X'.
that do_sum = 'X' is not working and going to dump when executed.with out that do_sum it is working fine. the error in dump analysys is showing sap standard incude LSLVCF01.
    assign component
           <ls_fieldcat>-fieldname of structure rt_data to <g_field>.
    if sy-subrc ne 0.
      message x000(0k).
    endif.
sy-subrc is 4 when the program is being executed.
CODE:
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
ls_fcat-fieldname = 'VBELN1'.
ls_fcat-ref_field = 'VBELN'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Invoice No'.
ls_fcat-seltext = 'Invoice No'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'BUDAT'.
ls_fcat-ref_table = 'BKPF'.
ls_fcat-coltext = 'Invoice Date'.
ls_fcat-seltext = 'Invoice Date'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'NETWR'.
ls_fcat-ref_field = 'NETWR'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Value of Invoice'.
ls_fcat-seltext = 'Value of Invoice'.
ls_fcat-datatype = 'CURR'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ENDFORM.
can u please look in the code and rectify the error,
would appeciate ur response.
regards,
veera.

Hi,
try this..
ls_fcat-fieldname = 'NETWR'.
ls_fcat-ref_field = 'NETWR'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Value of Invoice'.
ls_fcat-seltext = 'Value of Invoice'.
ls_fcat-datatype = 'CURR'.
ls_fcat-do_sum = 'X'.
<b>ls_fcat-cfieldname = 'WAERS'.</b>
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
Regards
vijay

ALV GRID Display function module giving Run time error

Hello Experts,
I have ALV report, In which I am using ALV grid dispaly FM to display the report.
But when my out table which I am passing to FM is empty that time ALV grid display shows blank ALV report. but when out table is not empty that time I am getting the Run time error, which shows message "Field symbol has not yet been assigned".
Can any one please help me out in this.
Thanks

TYPES: BEGIN OF type_out,
        col00    TYPE   ytlet-rzzyyproduct,
        col01    TYPE   ytlet-kslvt,
        col02    TYPE   ytlet-kslvt,
        col03    TYPE   ytlet-kslvt,
        col04    TYPE   ytlet-kslvt,
        col05    TYPE   ytlet-kslvt,
        col06    TYPE   ytlet-kslvt,
        col07    TYPE   ytlet-kslvt,
        col08    TYPE   ytlet-kslvt,
        col09    TYPE   ytlet-kslvt,
        col10    TYPE   ytlet-kslvt,
        col11    TYPE   ytlet-kslvt,
        col12    TYPE   ytlet-kslvt,
        col13    TYPE   ytlet-kslvt,
        col14    TYPE   ytlet-kslvt,
        col15    TYPE   ytlet-kslvt,
        col16    TYPE   ytlet-kslvt,
        col17    TYPE   ytlet-kslvt,
        col18    TYPE   ytlet-kslvt,
        col19    TYPE   ytlet-kslvt,
        col20    TYPE   ytlet-kslvt,
        col21    TYPE   ytlet-kslvt,
        col22    TYPE   ytlet-kslvt,
        col23    TYPE   ytlet-kslvt,
        col24    TYPE   ytlet-kslvt,
        col25    TYPE   ytlet-kslvt,
        col26    TYPE   ytlet-kslvt,
        col27    TYPE   ytlet-kslvt,
        col28    TYPE   ytlet-kslvt,
        col29    TYPE   ytlet-kslvt,
        col30    TYPE   ytlet-kslvt,
        col31    TYPE   ytlet-kslvt,
        col32    TYPE   ytlet-kslvt,
        col33    TYPE   ytlet-kslvt,
        col34    TYPE   ytlet-kslvt,
        col35    TYPE   ytlet-kslvt,
        col36    TYPE   ytlet-kslvt,
        col37    TYPE   ytlet-kslvt,
        col38    TYPE   ytlet-kslvt,
        col39    TYPE   ytlet-kslvt,
        col40    TYPE   ytlet-kslvt,
        col41    TYPE   ytlet-kslvt,
        col42    TYPE   ytlet-kslvt,
        col43    TYPE   ytlet-kslvt,
        col44    TYPE   ytlet-kslvt,
      END OF type_out.
DATA: t_fieldcat   TYPE slis_t_fieldcat_alv,   "Field catelog table
      w_fieldcat   TYPE slis_fieldcat_alv,     "Field catelog Work area
      w_layout     TYPE slis_layout_alv,       "Layout structure
      w_event      TYPE slis_alv_event,        "Event structure
      t_event      TYPE slis_t_event,          "Event structure
      t_sort       TYPE STANDARD TABLE OF slis_sortinfo_alv,
      t_callback_main_user_command TYPE slis_formname,
      v_selfield TYPE slis_selfield.
FIELD-SYMBOLS: <ksl>.
FORM DISPLAY_REPORT .
*Prepare Field Catlog
PERFORM creat_field_catlog.
*Set layout
PERFORM set_layout.
*Get Event
PERFORM get_event.
*Display Report
PERFORM display_alv_report.
ENDFORM.                    " DISPLAY_REPORT
FORM creat_field_catlog .
PERFORM add_fields_catlog USING:
       '01'    'RZZYYPRODUCT'     'IT_OUT'    'MPMs' ' ',
       '02'    'KSLVT'     'IT_OUT'    'License Fee' ' ',
       '03'    'KSLVT'     'IT_OUT'    'Ad Sales' ' ',
       '04'    'KSLVT'     'IT_OUT'    'Promo Fees' ' ',
       '05'    'KSLVT'     'IT_OUT'    'Total Ad Sales/Promo' ' ',
       '06'    'KSLVT'     'IT_OUT'    'Other' ' ',
       '07'    'KSLVT'     'IT_OUT'    'Total' ' ',
       '08'    'KSLVT'     'IT_OUT'    'Dom Station' ' ',
       '09'    'KSLVT'     'IT_OUT'    'Basic Cable/Free VOD' ' ',
       '10'    'KSLVT'     'IT_OUT'    'License Fee' ' ',
       '11'    'KSLVT'     'IT_OUT'    'Ad Sales (incl Internet)' ' ',
       '12'    'KSLVT'     'IT_OUT'    'Promo Fees' ' ',
       '13'    'KSLVT'     'IT_OUT'    'Ad Sales & Promo Fees' ' ',
       '14'    'KSLVT'     'IT_OUT'    'Foreign' ' ',
       '15'    'KSLVT'     'IT_OUT'    'Pay TV' ' ',
       '16'    'KSLVT'     'IT_OUT'    'Other' ' ',
       '17'    'KSLVT'     'IT_OUT'    'Total' ' ',
       '18'    'KSLVT'     'IT_OUT'    'Home Entertainment' ' ',
       '19'    'KSLVT'     'IT_OUT'    'SPTI' ' ',
       '20'    'KSLVT'     'IT_OUT'    'All Other Divisions' ' ',
       '21'    'KSLVT'     'IT_OUT'    'Total' ' ',
       '22'    'KSLVT'     'IT_OUT'    'Total Revenue' ' ',
       '23'    'KSLVT'     'IT_OUT' 'PV Net Down & Producers Share' '',
       '24'    'KSLVT'     'IT_OUT'    'Total Net Revenue' ' ',
       '25'    'KSLVT'     'IT_OUT'    'Development Expense' ' ',
       '26'    'KSLVT'     'IT_OUT'    'SOP Deficits' ' ',
       '27'    'KSLVT'     'IT_OUT'    'Amortization' ' ',
       '28'    'KSLVT'     'IT_OUT'    'Other COS ' ' ',
       '29'    'KSLVT'     'IT_OUT'    'Total COS' ' ',
       '30'    'KSLVT'     'IT_OUT'    'Profit Before Releasing' ' ',
       '31'    'KSLVT'     'IT_OUT'    'Gross Profit %' ' ',
       '32'    'KSLVT'     'IT_OUT'    'SPT' ' ',
       '33'    'KSLVT'     'IT_OUT'    'Home Entertainment' ' ',
       '34'    'KSLVT'     'IT_OUT'    'SPTI' ' ',
       '35'    'KSLVT'     'IT_OUT'    'All Other Divisions' ' ',
       '36'    'KSLVT'     'IT_OUT'    'Other' ' ',
       '37'    'KSLVT'     'IT_OUT'    'Total' ' ',
       '38'    'KSLVT'     'IT_OUT'    'Gross Profit' ' ',
       '39'    'KSLVT'     'IT_OUT'    'SPT' ' ',
       '40'    'KSLVT'     'IT_OUT'    'Home Entertainment' ' ',
       '41'    'KSLVT'     'IT_OUT'    'SPTI' ' ',
       '42'    'KSLVT'     'IT_OUT'    'All Other Divisions' ' ',
       '43'    'KSLVT'     'IT_OUT'    'Other' ' ',
       '44'    'KSLVT'     'IT_OUT'    'Total' ' ',
       '45'    'KSLVT'     'IT_OUT'    'Net Margin' ' '.
ENDFORM.                    " CREAT_FIELD_CATLOG
*&      Form ADD_FIELDS_CATLOG
      Filling of field Catlog
FORM add_fields_catlog USING    p_colpos
                                 p_fildname
                                 p_tabname
                                 p_fildtext
                                 p_ndisplay.
w_fieldcat-row_pos       = '1'.
w_fieldcat-col_pos       = p_colpos.
w_fieldcat-fieldname     = p_fildname.
w_fieldcat-tabname       = p_tabname.
w_fieldcat-reptext_ddic = p_fildtext.
w_fieldcat-no_out        = p_ndisplay.
APPEND w_fieldcat TO t_fieldcat.
CLEAR: w_fieldcat.
ENDFORM.                    " ADD_FIELDS_CATLOG
*&      Form SET_LAYOUT
      Set Layout
FORM set_layout .
w_layout-colwidth_optimize = 'X'.
ENDFORM.                    " SET_LAYOUT
*&      Form GET_EVENT
      text
FORM get_event .
w_event-name = 'TOP-OF-PAGE'.
w_event-form = 'F_TOP-OF_PAGE'.
APPEND w_event TO t_event.
ENDFORM.                    " GET_EVENT
*&      Form TOP-OF-PAGE
      Top of Page
FORM top-of-page.
DATA : t_list_commentry   TYPE slis_t_listheader,
           w_header           TYPE slis_listheader,
           lv_text(90)        TYPE c,
           l_text(90)         TYPE c,
           lv_rundate(10)     TYPE c,
           lv_runtime(10)     TYPE c.
CONSTANTS: c_space(2) TYPE c VALUE ' ',
             c_space2(6) TYPE c VALUE '      '.
w_header-typ = 'S'.
w_header-key = 'Program:'.
w_header-info = sy-repid.
APPEND w_header TO t_list_commentry.
WRITE: sy-datum TO lv_rundate MM/DD/YYYY.
WRITE: sy-uzeit TO lv_runtime USING EDIT MASK '__:__:__'.
CLEAR w_header.
w_header-typ = 'S'.
w_header-key = text-021.
w_header-info = lv_rundate.
APPEND w_header TO t_list_commentry.
CLEAR: w_header.
w_header-typ = 'S'.
w_header-key = 'User Id'.
w_header-info = sy-uname.
APPEND w_header TO t_list_commentry.
CLEAR: w_header.
w_header-typ = 'S'.
w_header-key = 'Run Date'.
w_header-info = lv_rundate.
APPEND w_header TO t_list_commentry.
CLEAR: w_header.
w_header-typ = 'S'.
w_header-key = 'Run Time'.
w_header-info = lv_runtime.
APPEND w_header TO t_list_commentry.
CLEAR: w_header.
w_header-typ = 'H'.
w_header-key = 'order'.
w_header-info = 'MCR Report'.
APPEND w_header TO t_list_commentry.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = t_list_commentry.
ENDFORM.                    "TOP-OF-PAGE
FORM display_alv_report .
CONSTANTS : gc_save TYPE c VALUE 'A'. "Save Layout
t_callback_main_user_command = c_user_command.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
    i_callback_user_command           = t_callback_main_user_command
     i_callback_top_of_page            = 'TOP-OF-PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
     is_layout                         = w_layout
     it_fieldcat                       = t_fieldcat
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
     i_save                            = gc_save
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = it_out
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
   ENDIF.

Dump when summing up CURR field in ALV GRID display

Hi All,
I am getting dump when I try to sum the CURR field in my ALV Grid Display. The field is of CURR 23. I am using classes and methods to display alv grid.
I tried passing <fs_fieldcat>-do_sum = 'X'. When I did this, it is dumping without even displaying the alv grid.
Here is the part it is throwing dump:
        ls_lvc_data-value = space.
        clear ls_lvc_data-style.
        loop at it_fcat_local assigning <ls_fcat>
                where tech ne 'X' and no_out ne 'X'.
          if l_invisible eq 'X'.
            clear l_invisible.
            if <ls_fcat>-do_sum is initial.
              continue.
            else.
              clear ls_lvc_data-col_pos.
            endif.
          endif.
          add 1 to ls_lvc_data-col_pos.
          assign component <ls_fcat>-fieldname
                           of structure <ls_data> to <l_field_value>.
          _if sy-subrc ne 0.
            message x000(0k).
          endif._
Regards,
Guru

Thomas,
Here is the dump:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          10/22/2010 23:30:53
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Long text of error message:
Technical information about the message:
Message class....... "0K"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLSLVC" or "LSLVCF36"
"FILL_DATA_TABLE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Source Code Extract
Line
SourceCde
2708
is_subtottxt_info = ls_subtot_info
2709
ip_subtot_line    = lr_data
2710
changing
2711
c_subtottxt       = l_subtottxt.
2712
ls_lvc_data-value = l_subtottxt.
2713
2714
append ls_lvc_data to ct_lvc_data.
2715
endif.
2716
2717
2718
Column per Fieldcat Entry
2719
2720
ls_lvc_data-value = space.
2721
clear ls_lvc_data-style.
2722
loop at it_fcat_local assigning <ls_fcat>
2723
where tech ne 'X' and no_out ne 'X'.
2724
if l_invisible eq 'X'.
2725
clear l_invisible.
2726
if <ls_fcat>-do_sum is initial.
2727
continue.
2728
else.
2729
clear ls_lvc_data-col_pos.
2730
endif.
2731
endif.
2732
2733
add 1 to ls_lvc_data-col_pos.
2734
2735
assign component <ls_fcat>-fieldname
2736
of structure <ls_data> to <l_field_value>.
2737
if sy-subrc ne 0.
>>>>>
message x000(0k).
2739
endif.
2740
2741
*... work on average
2742
if <ls_fcat>-do_sum eq 'C'.
2743
          Initialize average result and entries
2744
<l_field_value> = 0.
2745
clear l_entries.
2746
2747
          retrive unit from fieldcatalog
2748
assign space to <l_unit>.
2749
if not <ls_fcat>-cfieldname is initial.
2750
assign component <ls_fcat>-cfieldname
2751
of structure <ls_data> to <l_unit>.
2752
endif.
2753
if not <ls_fcat>-qfieldname is initial.
2754
assign component <ls_fcat>-qfieldname
2755
of structure <ls_data> to <l_unit>.
2756
endif.
2757

Field symbol has not yet been defined-ALV Grid Display in Report

Hi all,
Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?

Hi,
<li> This is problem with fieldcatalog.
<li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
<li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
Thanks
Venkat.O

Kindly help to develop alv grid display

Hi ,
I have a requirement in which I need to display ALV GRID display and in its tool bar 4 butons are required. In the same view down to alv display i want to develop a tabstrip and its functionalities.I have designed classic alv using SALV_WD_TABLE component. I want a good GRID Display, not like flat field names that comes in list display, looking for bulged fields(like what comes for ALV GRID in normal abap) display with print version etc hidden and buttons at the top of ALV. Kindly help
Highly rewarded
Kindly help
Regards,
Lakshmi
Edited by: Lakshmi Menon on Nov 27, 2008 4:49 PM

Well Web Dynpro is generally output in HTML so the output formatting is never going to quite look like a desktop application (which is the case with the ALV Grid). You have very little control over the look of the column headers. In fact you can only manipulate what is available via the Portal Theme.
There is a new Tradeshow Plus theme available in NetWeaver 7.01 which uses a gradiant background for the column headers. This gives them a little more depth:
http://www.flickr.com/photos/tjung/3068850120/
The other option is next year when NetWeaver Business Client version 3.0 comes out, you will be able to render Web Dynpro applications using the NWBC Smart Client Rendering. This will render Web Dynpro applications using desktop libraries instead of HTML/Browser. This gives Web Dynpro a more SAPGUI/Desktop appears of course.
http://www.flickr.com/photos/tjung/2685619882/in/set-72157606418550143/

Folder in alv grid display report

Hi Experts,
I have a requirement to generate the folder in alv grid display, to display the multiple line items where ever we have.
Actually I am displaying the material details and production order details.
If the material is having the multiple production order details , in that case we need to place all the production order details in one folder, and if you open that folder arrow, we have to display the production order details.
I am using REUSE_ALV_GRID_DISPLAY function module to develope this application. Here Hierseq list is recommended to use for this application, why because folder option is already available in grid display. that we can observe in CL6AN.
Is it possible to implement it through function modules or through OOABAP.
Actually, I have to generate the report which we can see in CL6AN Transaction code,,
Your valuable suggestions surely will attract the benifits.
Thanks in advance.
Ramesh.

Hi ramesh,
Hierseq list is not supported in the grid display. You could do this using an OO tree display but this could be rather complicated. What about displaying one field per material line with the number of production orders. At double-click on that field, open a second grid display (possibly as popup) to show the production order details.
Regards,
Clemens

Currency field in alv grid display

Hi,
I am using alv grid display.I am having one currency field netprice.I want it to be displayed as blank when i am not passing any value.But it gives 0.00 when it is not having any value.How to make it blank instead of 0.00.
Points will be rewarded.
Regards,
Sowmya.

HI,
If itab-curr = '0.00' .
itab-curr = ''.
modify itab.
endif.

Field Catolgue in alv grid display

Hi Abapers,
I need to display the percentage rows with decimals and other rows without decimal . Is their any option in field catalog to do like this. Or tell me any other alternative to achieve this.
sno total     col1      col2      col3
1      220       100        20       100
2      320      120         50        150
tot    540       220        70         250
per               40.74     1.87 and so on
or ,
I have two different internal tables how can i put it in one field catalog to pass it to alv grid display.
Regards,
Priya

Don't   do total by your self in the Pogram.
in the   Fieldcatalog there is an Attribute which will do total & Average .
Enable it so that from one internal table   data   it self it will do good.
example program
Below is an example ABAP program which will populate a simple internal table(it_ekpo) with data and
display it using the basic ALV grid functionality(including column total). The example details the main
sections of coding required to implement the ALV grid functionality:
                         Data declaration
                         Data retrieval
                         Build fieldcatalog
                         Build layout setup
REPORT zdemo_alvgrid                 .
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
*       Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
*               I.e. Field type may be required in-order for
*                    the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
* fieldcatalog-do_sum      = 'X'.
* fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.        "Display column total
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
* gd_layout-totals_only        = 'X'.
* gd_layout-f2code            = 'DISP'. "Sets fcode for when double
*                                         "click(press f2)
* gd_layout-zebra             = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text       = 'helllllo'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
*       Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
*            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
*            i_callback_user_command = 'USER_COMMAND'
*            i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
*            it_special_groups       = gd_tabgroup
*            IT_EVENTS                = GT_XEVENTS
            i_save                  = 'X'
*            is_variant              = z_template
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
*       Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform.                    " DATA_RETRIEVAL
gowri
Message was edited by:
        Gowri Krishna

Row seperator in the ALV grid display after the various highest level prod.

Hi,
I have a requirement like user wants a row seperator against the various high level products (Each parent material)in ALV Grid display.We made this change but quantity and pricey fields showing the zero's in the blank line.i know that if we use NO-ZERO
in the ALV field catalog , we can remove the zero's from blank line. But other zerou2019s will remove from rest of the line items. User want's the zero's in other line items, but not in the blank line.
We can convert packed fileds into character format, but this will effect to the summing the quantity, price coumns.
If any body have idea on above mentioned.
Regards,
SK.

Hi Suresh,
There is no short cut for this requirement. You have to do following steps.
1. Change the data type of column to char.
2. Programatically find the totals.
Reagards,
Anversha

EDIT THE FIELV VALUE IN ALV GRID DISPLAY

Hi Guru ,
How can I edit the value of a particular one or two fields in ALV GRID DISPLAY .
Please reply me

hi,
1.Set status of all cells to editable using the layout structure.
2.Use SET_READY_FOR_INPUT to activate the edit feature initially.
   (state "editable activated").
3.Use IS_READY_FOR_INPUT to fetch current substate of editable cells.
4.Use SET_READY_FOR_INPUT to switch between the substates.
    CALL METHOD g_grid->set_table_for_first_display
         EXPORTING i_structure_name = 'SFLIGHT'
                   is_layout        = gs_layout
         CHANGING it_outtab        = gt_outtab.
*§2.Use SET_READY_FOR_INPUT to allow editing initially.
*   (state "editable and ready for input").
    CALL METHOD g_grid->set_ready_for_input
          EXPORTING i_ready_for_input = 1.
*Use IS_READY_FOR_INPUT to fetch current substate of editable cells.
IF g_grid->is_ready_for_input( ) EQ 0.
*Use SET_READY_FOR_INPUT to switch between the substates.
    CALL METHOD g_grid->set_ready_for_input
                     EXPORTING i_ready_for_input = 1.
ELSE.
    CALL METHOD g_grid->set_ready_for_input
                     EXPORTING i_ready_for_input = 0.
ENDIF.

Update values in AlV grid display after entering value

Hi,
     I have an issue in ALV grid display.
    Let me explain.
    i have 8 fields to display in which one is editiable.
   Fields are: date
                   material,
                   material Description,
                   Opening Stock,
                   Closing stock- ( this field is editiable)
                   Closing stock,
                   Received Stock,
                   Actual production.
Actual production = Closing stock + removal stock
                             - receipt stock - opening stock.
when i change the value of closing stock and press enter, actual production should get update, the new values should display.
Thany you in advance.

Hi,
Please refer the code below:
REPORT z_demo_alv_jg.*******************************************************************
* TYPE-POOLS                                                      *
TYPE-POOLS: slis. *******************************************************************
* INTERNAL TABLES/WORK AREAS/VARIABLES     *
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
      i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
      w_field TYPE slis_fieldcat_alv,
      p_table LIKE dd02l-tabname,
      dy_table TYPE REF TO data,
      dy_tab TYPE REF TO data,
      dy_line TYPE REF TO data.*******************************************************************
* FIELD-SYMBOLS                                                   *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
               <dyn_wa> TYPE ANY,
               <dyn_field> TYPE ANY,
               <dyn_tab_temp> TYPE STANDARD TABLE.*******************************************************************
* SELECTION SCREEN                                                *
PARAMETERS: tabname(30) TYPE c,
            lines(5) TYPE n.*******************************************************************
* START-OF-SELECTION                                              *
START-OF-SELECTION.* Storing table name
p_table = tabname.* Create internal table dynamically with the stucture of table name
* entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
    MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'.    LEAVE TO LIST-PROCESSING.
ENDIF.
* Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.* Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>. SORT i_fieldcat BY col_pos.* Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS. REFRESH <dyn_tab_temp>.* Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program       = sy-repid
      i_structure_name         = p_table
      i_callback_user_command = 'USER_COMMAND'
      i_callback_pf_status_set = 'SET_PF_STATUS'
    TABLES
      t_outtab                 = <dyn_table>
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2. IF sy-subrc <> 0. ENDIF.*&-----------------------------------------------------------------*
*&      Form SET_PF_STATUS
*       Setting custom PF-Status
*      -->RT_EXTAB   Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab. SET PF-STATUS 'Z_STANDARD'.ENDFORM.                    "SET_PF_STATUS*&----------------------------------------------------------------*
*&      Form user_command
*       Handling custom function codes
*      -->R_UCOMM      Function code value
*      -->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING    r_ucomm LIKE sy-ucomm
                           rs_selfield TYPE slis_selfield.* Local data declaration
DATA: li_tab TYPE REF TO data,
        l_line TYPE REF TO data.* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
                <l_wa> TYPE ANY.* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>. CASE r_ucomm.*   When a record is selected
    WHEN '&IC1'.*     Read the selected record
      READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
      rs_selfield-tabindex.      IF sy-subrc = 0.*       Store the record in an internal table
        APPEND <dyn_wa> TO <l_tab>.*       Fetch the field catalog info
        CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
          EXPORTING
            i_program_name         = 'Z_DEMO_PDF_JG'
            i_structure_name       = p_table
          CHANGING
            ct_fieldcat            = i_fieldcat
          EXCEPTIONS
            inconsistent_interface = 1
            program_error          = 2
            OTHERS                 = 3.
        IF sy-subrc = 0.*         Make all the fields input enabled except key fields
          w_field-input = 'X'.          MODIFY i_fieldcat FROM w_field TRANSPORTING input
          WHERE key IS INITIAL.        ENDIF.*       Display the record for editing purpose
        CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
          EXPORTING
            i_callback_program    = sy-repid
            i_structure_name      = p_table
            it_fieldcat           = i_fieldcat
            i_screen_start_column = 10
            i_screen_start_line   = 15
            i_screen_end_column   = 200
            i_screen_end_line     = 20
          TABLES
            t_outtab              = <l_tab>
          EXCEPTIONS
            program_error         = 1
            OTHERS                = 2.        IF sy-subrc = 0.*         Read the modified data
          READ TABLE <l_tab> INDEX 1 INTO <l_wa>.*         If the record is changed then track its index no.
*         and populate it in an internal table for future
*         action
          IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
            <dyn_wa> = <l_wa>.
            i_index = rs_selfield-tabindex.
            APPEND i_index.
          ENDIF.
        ENDIF.      ENDIF.*   When save button is pressed
    WHEN 'SAVE'.*     Sort the index table
      SORT i_index.*     Delete all duplicate records
      DELETE ADJACENT DUPLICATES FROM i_index.      LOOP AT i_index.*       Find out the changes in the internal table
*       and populate these changes in another internal table
        READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
        IF sy-subrc = 0.
          APPEND <dyn_wa> TO <dyn_tab_temp>.
        ENDIF.      ENDLOOP.*     Lock the table
      CALL FUNCTION 'ENQUEUE_E_TABLE'
        EXPORTING
          mode_rstable   = 'E'
          tabname        = p_table
        EXCEPTIONS
          foreign_lock   = 1
          system_failure = 2
          OTHERS         = 3.      IF sy-subrc = 0.*       Modify the database table with these changes
        MODIFY (p_table) FROM TABLE <dyn_tab_temp>.        REFRESH <dyn_tab_temp>.*       Unlock the table
        CALL FUNCTION 'DEQUEUE_E_TABLE'
          EXPORTING
            mode_rstable = 'E'
            tabname      = p_table.      ENDIF.
ENDCASE. rs_selfield-refresh = 'X'.ENDFORM.                    "user_command
Thanks,
Sriram Ponna.

How to change a color for a row in ALV grid display

Hi,
how to change a color for a row in ALV grid display based on a condition.Any sample code plz

Hello Ramya,
Did you check in [SCN|How to color a row of alv grid]
Thanks!

How to capture the checkbox status in ALV Grid display

I need some immediate help regarding Grid ALV.
My Requirement: I need to display an ALV grid report along with checkboxes. Further, I need to provide an option wherein the user can checkboxes and select the records that I need to process further (by clicking the process button on the ALV Report).
My Query: The problem here is that I am not able to capture the status of the checkboxes. This means that I am not able to capture which of the records have been selected by checking their resp checkboxes.
Solutions that I have tried: I have tried capturing the same at user command by checking the value in slis_selfield. But all the records show the value as 1 for the checkbox field.
Kinldy suggest how to go about it.
I am not using Object Oriented ALV. Please suggest something to be used in ALV Grid display in 4.6C version.
Regards,
Namrata

Here is a Sample code , it might help you
TABLES : sflight.
TYPE-POOLS: slis.
DATA : w_repid LIKE sy-repid.
w_repid = sy-repid.
DATA: BEGIN OF it_sflight OCCURS 0,
checkbox(1),
carrid LIKE sflight-carrid,
END OF it_sflight.
*layout
DATA: wa_layout TYPE slis_layout_alv.
*field catalog
DATA: it_fieldcatalog TYPE slis_t_fieldcat_alv,
          wa_fieldcatalog TYPE slis_fieldcat_alv.
START-OF-SELECTION.
SELECT carrid FROM sflight
     INTO CORRESPONDING FIELDS OF TABLE it_sflight.
END-OF-SELECTION.
CLEAR it_fieldcatalog.
REFRESH it_fieldcatalog.
wa_fieldcatalog-fieldname = 'CHECKBOX'.
wa_fieldcatalog-outputlen = '3'.
wa_fieldcatalog-col_pos = '1'.
wa_fieldcatalog-seltext_m = 'Chk'.
wa_fieldcatalog-checkbox = 'X'.
wa_fieldcatalog-edit = 'X'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_fieldcatalog-fieldname = 'CARRID'.
wa_fieldcatalog-outputlen = '10'.
wa_fieldcatalog-col_pos = '2'.
wa_fieldcatalog-seltext_m = 'Carrid'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = w_repid
      is_layout = wa_layout
      i_callback_user_command = 'USER_COMMAND'
      it_fieldcat = it_fieldcatalog
    TABLES
      t_outtab = it_sflight
    EXCEPTIONS
      program_error = 1
      OTHERS = 2.
*& Form USER_COMMAND
FORM user_command USING p_ucomm TYPE sy-ucomm
p_selfld TYPE slis_selfield.
CASE p_ucomm.
   WHEN '&DATA_SAVE'.
      DATA ref1 TYPE REF TO cl_gui_alv_grid.
      CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
         IMPORTING
           e_grid = ref1.
      CALL METHOD ref1->check_changed_data.
      LOOP AT it_sflight WHERE checkbox = 'X'.
         DELETE it_sflight INDEX sy-tabix.
      ENDLOOP.
      p_selfld-refresh = 'X'.
ENDCASE.
ENDFORM. "user_command

How to color a row in ALV grid display

Hi,
A few rows in the output of ALV grid display should be shown in different color.How can I achieve this?

Hi,
Try out this code
DATA : BEGIN OF G_T_CASH OCCURS 0,
       PARTICULARS TYPE CHAR120,
       AMOUNT1 TYPE CHAR20,
       AMOUNT2 TYPE CHAR20,
       AMOUNT3 TYPE CHAR20,
       ROW_COLOR TYPE CHAR4,----
add this in the internal table for alv
      END OF G_T_CASH.
CLEAR G_WA_CASH.
G_WA_CASH-PARTICULARS = 'Opening Cash Balance'.
G_WA_CASH-AMOUNT1 = G_DMBTR.
G_WA_CASH-AMOUNT2 = ''.
G_WA_CASH-AMOUNT3 = ''.
while appending other values also add the following code
G_WA_CASH-ROW_COLOR = 'C200'.----- C200 depicts light gray color
APPEND G_WA_CASH TO G_T_CASH.
add the following code in layout
MOVE 'ROW_COLOR' TO WA_LS_LAYOUT-INFO_FIELDNAME.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_BYPASSING_BUFFER = ' '
      I_SAVE             = 'A'
    I_CALLBACK_PROGRAM                = SY-REPID
I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
     IS_LAYOUT                        = WA_LS_LAYOUT
     IT_FIELDCAT                      = G_T_CATALOG
     IT_EVENTS                         = GT_EVENTS
     TABLES
       T_OUTTAB                       = G_T_CASH[]
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Let me know if the problem still persist.
Regards,
Janaki

ERROR IN OUTPUR ALV GRID DISPLAY

Similar Messages

Maybe you are looking for