Error in posting document in FPE1

Hi Gurus,
I tried to post a document in FPE1 and it returned an error " Manual postings not permitted". Can anyone please help me finish the posting.
Points awarded for all useful solutions.
Thanks
Santosh

You should check if the main and sub transactions are allowed for manual postings, as well as the document type.
Financial Accounting (New)->Contract Accounts Receivable and Payable->Basic Functions->Postings and Documents->Document->Maintain Document Assignments->Maintain Transactions for IS-U->Maintain Transactions for Charges
Here you have to mark the flag "Manual postings allowed"
Best regards.

Similar Messages

Error while Posting Document in FBV0

Hi Guys,
Iam getting following error while Posting Document in FBV0 which is already parked and it is with tax code.
Error: "No batch input data for screen SAPMF05A 0700"
Kindly suggest
Thanx and Regards
Munender

Also have a look at the following notes:-
=> Note 26050 - FIPP:Posting not poss. (SAPMF05A,0700,batch input)
=> Note 800177 - FB01: No batch input data for SAPMF05A 0700
thanks
G. Lakshmipathi

Error While Posting documents using F-28

Dear Friends,
While posting Documents using 'F-28' after I passed posting key and account number I m getting the Error
'Entry not Possible'. Can anyone tell what may be the problem how to clear this error.
Regards
Balamurugan N
Moderator message: duplicate post locked, follow up on your previous one instead of opening a new thread for the identical problem.
Edited by: Thomas Zloch on Apr 26, 2011 8:34 PM

Hi,
I Guess this error is occuring because of the posting key and account number (Account type) combination is not correct. For each account type a perticular posting is is defined for debit and credit entries.
Check with your functional the correct posting key for account type and account number you are using.

FIPP object, getting error while posting document in background step

Hi Experts,
Once approval is done we are posting document in background, but getting following error
No batch input data for screen SAPMF05A 0607
We have delegeted object FIPP to ZFIPP and added method zpost with same code as post with some initial validations.
Your help in solving this error would be really appreciated.

If you really haven't done any relevant changes to the SAP standard post method, I would look for an answer from OSS. And if not found, then ask from SAP. But if you have replaced the standard post method code with for example some BDC code, then you need to check this with your ABAP guys... I don't think that it has anything to do with workflow.
Regards,
Karri

Lock Error while posting document through bapi_acc_document_post

Hi,
We are trying to Post documents in R/3 using Bapi_acc_document_post from BW system using ABAP report. The report groups data using certain criteria and makes a Bapi call for each group.
Problem : The program has 2 modes test mode and actual run.
When the program was run in a test mode 15 groups were created. Hence 15 documents should get created in R/3.
Now when the actual run was done the program gave an output saying doc1 created,doc2 created....doc11 created.. and suddenly Bapi error .. doc1 is locked by another user, doc1 is locked by another user, doc1 is locked by another user, doc1 is locked by another user.
Moreover Doc1 never got created in R/3. Doc 2 to Doc11 were created in R/3 and then the BApi error.
Can anyone please help me understand why this could have happened?
P.S : We use same Bapi for Check run as well as Actual run. Only difference is that in actual run a BApi_commit is done.
Do you think using BAP_ACC_DOCUMENT_CHECK during check run will help ?
PLease advice.

Setting the WAIT parameter = 'X' will make your updates synchronous which might solve your problem.
Please try and let me know.

System Error when posting document

Hi, all!
We are using SAP BPC 7.0 SP3 on SQL 2005. When we try post document to content library and select option "Send mail notification" the system error occur "The system encountered an error an cannot proceed", Detail information: "Could not access CDO.Message object". We had set right parameters for smtp in WebAdministration before post document. Then we don't select option "Send mail notification" document is posted without any error.
Have anybody faced with such error?
Thank you for help.
Best regards, Iaroslav

Hi, all!
I use the same smtpuser login, as in email of user which public document and everything post ok. When I try to post document by another user when error appear again.
Is in BPC only one user able to post document, or every user have to change smtpuser in Web-Admin before posting of document?
Best regards,
Iaroslav

Error in Posted document of Depreciation.

Hi
Before running the depreciation with no error in test run, after the deperciation run. when we are checking the same in AFBP (Posted Log), it is showing error in some posted document.
If anyone have some idea of it please share with me.
thanks in advance for all your support.
Regards
Shiv

Dear Mr Shiva,
Please go to the error message and check against which asset class the said error message is coming.
Then check the respective account determination in AO90
I Thing you have not assigned the GL account to the Account Determination for that Asset Class.
Every thing is OK then,
Please also check any AUC u have created and in Asset Master of the AUC u have by mistake assigned the depr Key.
As a practice u should assign '0' depr key to the AUC.
Regards,
Alok

System error on posting document

Hi,
Since a week we have been experiencing problems when trying to post documents through the SAP BPC WEB funcitonality. When selecting the content library from the web we get a system error. For as far as I can recall nothing has changed in the settings of the application. This is the error message which appears:
System error:
The system has encountered an error and cannot proceed. Please select the back button and try again. If the problem persists, cantact your system administrator.
Job name : http://10.101.10.198/OSoft/Contents/WebContentsList.aspx
Detail : The , character, hexadecimal value 0x2C, cannot begin with a name. Line 8, position 102.
We are running on a Windows 2003 server. SQL 2005 and SAP BPC SP3
Does anyone has a clue?
regards,
Sander

Thanks for all the help guys. The problem is solved now. It appeared that there were some duplicate values in the table dbo.tblcollabtype which caused the errors.
Budget 2008     Budget 2008
Estimate1 2008     Estimate1 2008
Estimate2 2008     Estimate2 2008
Budget 2009     Budget 2009
Estimate1 2009     Estimate1 2009
Estimate2 2009     Estimate2 2009
Budget 2010     Budget 2010
Estimate1 2010     Estimate1 2010
Estimate2 2010     Estimate2 2010
Budget 2011     Budget 2011
Estimate1 2011     Estimate1 2011
Estimate2 2011     Estimate2 2011
Budget 2008     Budget 2008
Estimate1 2008     Estimate1 2008
Estimate2 2008     Estimate2 2008
NULL                     NULL
cheers,

3rd Party Remittance Posting Error - No Posting Document Created (ECC 6.0)

Hello Everyone,
When running 3rd Party Remittance process, the system does not create a posting document to be released/posted in PCP0. In PCP0, Run Type: TP -posting thrid-party remittance does not exist. Also, the T51R* tables are not updating properly as well when I execute the 3rd party processes.
I've compared configuration from the old to the new system and it appears to be okay. I need some assistance to figure out this issue. Can someone give some advice on how to resolve my issue.
Fyi...we run the following processes:
PC00_M99_U500 - Evaluation Run
PC00_M10_URMU- Store Evaluation Run
PC00_M99_URMUP- Create Posting Run
PCP0 - Process Posting Run
Since we are not using the new Evaluation Run program(PC00_M99_URME), do we need to deactivate it to use the old evaluation run (PC00_M99_U500)?
Your advice will be greatly appreciated.
Brenda Goodwin
IT System Analyst
Roche Diagnostics Operations, Inc

Naveen,
Thank you for your suggestion. My configuration was correct. The issue was a system issue in which was forwarded to SAP for immediate attention. To correct my issue, I had to apply SAP Note 1039104 - GEN: No Posting run number for 3PR posting run (RPURMP00).
Kind Regards,
Brenda Goodwin

Non PO Invoice Workflow - Error while Posting Document

Hi Experts
Hope I am posting this in the right forum as I am new to SDN!
We have customized a multi-level non PO invoice workflow which triggers at the time of clicking 'Save as Completed' in tcode FV60.
It has been configured to automatically post the document once it is approved at all the required levels. However, the document cannot be posted even after it receives all levels of approval. The status shows as 'Complete' but the error message shown is 'No Amount Authorization for Customer/Vendor in Company Code' in the workflow screen (MSGID F5, MSGNO 155).
Now as I understand, this is the error for maintenance of user ID in tolerance groups. However, all user IDs have already been maintained and no matter who parks the document, the same error appears in the workflow screen.
We have no idea whether this is happening due to some missing config from FI side or WF side.
Regards

Hi
Go to Tcode: OBA3 Assign tolerance group under your company code and give all limits for each group. If you done this one your properly your problem should solve.

Error while posting document

Hi,
While we try to post a payment document for a customer invoice with Spl GL indicator, the system gives an error message - Reference to order is missing.
Help does not give any information except the message number - WHT-BR003.
Can anyone help me to find out the reason?
Regards,
Mike

Hi Ravi,
Thanks for your response.
Let me elaborate a little more. We are running a BRAZIL specific functionality - Vendor Financial Operation. The vendor arranges for finance options from banks to the customer for making the payment. Hence, the customer invoice is cleared by a payment document with a Spl GL indicator. Later, the vendor will recieve the money from the bank.
How to see the error message WHT-BR003?
Regards,
Mike

Error while Posting document in MB1B

Hi all,
When posting transfer document in transaction MB1B for
Movement type 311 for particular plant, System posts the
document and generates document no also, But as soon
as I press any key to back from that screen i am getting
error 'Express Document : update was terminated'.
If i check the material document number in MKPF table, there is no entry for that document number.
Could you please help.
Thanks,
Shankar.

Hi
There are many reasons why an update could be terminated, not
just
number ranges.
Go to transaction SM13.
Enter the date and user ID if known and find your transaction that was
terminated. Drill-down until you find which function (line) caused the
termination and double click. That should help you determine why the update failed.
update was terminated
regards
kunal
Edited by: kunal ingale on Nov 7, 2008 7:03 AM

Error while posting document in FS-CD

Hello,
When trying to post a document in FS-CD, I am getting the following error. Can someone please guide as to what could be the reason.
Central settings not maintained
Message no. >4071
Procedure for System Administration
Check and where necessary change your system settings.
To do this, choose Maintain entries or Customizing.
Thanks and Regards

Also have a look at the following notes:-
=> Note 26050 - FIPP:Posting not poss. (SAPMF05A,0700,batch input)
=> Note 800177 - FB01: No batch input data for SAPMF05A 0700
thanks
G. Lakshmipathi

Error in posting Document

Friends,
When i use single costcenter for employees Posting is done.
But when i use different CC for different employees and try to post at a time getting error saying that
Error in document :HRPAY 00000000103 QA1_L (Given document split based on accouint assignment in table V_T52E2)
Also error "balancing field in profit center in line item is 013 not filled (Given Split based on Company code in V_T52E2).
Also please let me know what to configure in V_T52E2 and how to fix this?

Hi,
Please let me know wthat to fill in table V_T52E2
Country :40
Run type :PP
Document Type :SA
Language:EN
Diocument split : Based on company code
Please let me know what else to fill or tell us if there is any correction or please send us the screen-shot.

Error while posting document in FB01

Hello All,
While creating a document I encounter th below error:
Please specify LBZ code
Kindly help me what the meaning of this.
Thanks in advance,
Jhero

hello,
thanks for the feedback.
its ZH285
thanks in advance,
Jhero

Error in posting document in FPE1

Similar Messages

Maybe you are looking for