Error in program 'igsmux': ====== CPIC-CALL: 'SAP_CMNOREGTP'
Hi All, After upgrading system to EHP 4 , dispatcher gets automatically turned off after few minutes and getting error as follows."Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP". Please find the logs file as attachment. Thanks, Sam
Dear Sam,
The problem is with your database DB2.
It has not been properly restore.
Checked the below error from dev_w0
C Supported features:
C
C ..retrieving configuration parameters
C ..done
C Running with UTF-8 Unicode
C Running with CLI driver
C
C Wed May 21 13:12:25 2014
C *** ERROR in DB6Connect[dbdb6.c, 1700] CON = 0 (BEGIN)
C &+ DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1116N A connection to or activation of database "EC6" cannot b
C &+ e made because of BACKUP PENDING. SQLSTATE=57019
C &+
C &+
C *** ERROR in DB6Connect[dbdb6.c, 1700] (END)
C *** ERROR => DbSlConnect to 'EC6' as 'sapec6' failed
[dbdb6.c 1705]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
With Regards
Ashutosh Chaturvedi
Similar Messages
-
STMS error - Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Dear Experts,
We are facing issue in releasing or importing TRs.
1.When releasing TRs in DEV server, it is showing error message "Could not start control program TP" on status bar. But repeating the same process went successful.
2. While Importing TRs into QAS, at the time of refreshing queue/adjusting import queue, it pops-up error " timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' .But after repeating same process, TRs were impoted successfully.
We had performed the following in DEV & QAs:
1. Upgraded kernel to patch level 137.
2. After that replaced TP & R3trans with latest patch levels 169.
3. Re-configured STMS
4. Restarted Server.
Also checked,
(i). Report RSTPTEST in se38- sometimes successful; sometimes error :"timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' (ii). RFC "CALLTP_WindowsNT" in sm59 Connection is OK.
Please help.
Thank you in advance.
RegardsHi,
Check below link if it helps:
Re: STMS
Pls also check below things :
- check that the "Gateway Options" are maintained in SM59 and the sapdp00/sapgw00 are maintained in the etc/services files. SAP Note 52959
- Please check SAP Note 773830 if you are on a cluster environment.
For the error regarding timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' please check SAP Notes 581509, 566566.
Thanks,
Rupali -
RFC error: timeout during allocate/CPIC-CALL: 'ThSAPCMRCV'#
Hi folks,
We experienced this error while trying to carry out transport into the Production Server- RFC error:timeout during allocate/CPIC-CALL: 'ThSAPCMRCV'#.
I have checked connection tests,RFC, they look fine.
Anyone experienced this before?
Thanks.hi,
please check :
SM59 > R/3 Connection > TMS Communication Interface generated --> is the connection OK ?
also check in :
STMS --> is the transport configured properly ?
rgds,
alfonsus guritno -
ODBO Error: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Hi Friends,
I'm getting following error, while accesing BI query data in management cockpit.
ODBO Error: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Pls suggest me steps to resolve issue.
thanks,
nareshhi,
i have query data in BI report and that is released for external access. I want to show that data in frame of managment cockpit based on key figure and characterstic. Simple query(region wise sales) with one char, two keyfigures & one time char and created mesure also. I want to show data in column chart.
when i checked in frame, error log: system says:
Error: ODBO error
Details: Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
ours is bi7 system. issue not resolved ..pls suggest me steps to resolve this.
thanks,. -
STMS distribution error - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Hello All
i am trying to confugreu STMS but i am facing this error when i am tryin to distribute the same,
System EC2 Command TMS_PM_DISTRIBUTE_PROFILE
Client 000 Service tp Profile Service
User TMSADM Start Online
Date 20.10.2009 Function TMS_PS_WRITE_PROFILE_TO_DISK
Time 17:36:23 Message SET_CODEPAGE_FAILED
description : Could not start transport control program tp
detail error is as below if i press on more information
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
some of the posts on forum suggested i should try from same domain i tried but in vain, then i updated the SAP kernel from 7.01 sp 14 to sp 55. but i am still facing the problem.
i created this system recently using system copy based upon export image of a system (ABAP stack ) but using ABAP+Java during export process (by mistake). then we tried to build system using import (ABAP stack only i know its weird but its up and running). I assume we should have builf export imgae using ABAP method but some how due to lack of time we proceeded this way.
The main problem i see is TP RFC . The output from prgram RSTPTEST is as below
everythign is fine except below entries
under RFC destination
EFC ping - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time out during connection setup (check that partner exists
under TP call
RFC link and Offline Call shws me the same error as RFC ping. and there is no output from tp version and DB connect.
Can anybody please help me on the same.
ManiHello All,
thanks a lot for you reply, i want to clear some point here
- I have no other physical attached to the system, i created other system as virtual system.
- to Sunny - i allready went through that thread and upgraded my Kernel also accordign to thread but problem still persist.
- to Anil .. i did as u said but nothing changed after that.
here is the log from trans log file
4 ETW000 r3trans.exe version 6.14 (release 701 - 12.06.09 - 15:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 20.10.2009 - 17:37:33
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans.exe -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Oct 20 17:37:37 2009 12584 0.012584
4 ETW000 [dev trc ,00000] db_con_init called 65 0.012649
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 401 0.013050
4 ETW000 [dbcon.c ,00000] *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
4 ETW000 160 0.013210
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
i have dbms/type = mss in profile parameters
I am still getting the same error.
Mani -
Hello everyone,
while trying to execute an MDX Statement on NW 7s SAP BI i ran into the "timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'" error.
I searched these forums for a solution an found SAP Note 1032461.
The Problem is: it only applys to older versions of the NetWeaver. NW 7 seems to have a new RFC library.
Is there another solution for this problem in NW 7?I found the solution.
The note was right, but i used the wrong .dll. -
Error in program 'listenerrfc'
Hi all,
Below is the error that I am getting in dev_trc.trc file
>TS> Wed Jul 14 03:15:49 2010
T:6236 Error in program 'listenerrfc': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2605
>TS> Wed Jul 14 03:16:54 2010
T:6236 Error in program 'listenerrfc': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2605
>TS> Wed Jul 14 03:17:59 2010
T:6236 Error in program 'listenerrfc': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2605
>TS> Wed Jul 14 03:19:04 2010
T:6236 Error in program 'listenerrfc': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2605
I am unable to figure this error. Do RFC's fail because of this error?
Thanks,
VishiHi Sreenivas,
The test connection was succesful.
GFW_ITS_RFC_DEST
IGS_RFC_DEST, both these RFC's of type T work.
This is the error that I found in the trace file
T:6552 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
ERROR partner 'ipaddress:3300' not reached
TIME Fri Jul 16 04:58:37 2010
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -10
MODULE nixxi.cpp
LINE 2985
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
>TS> Fri Jul 16 04:58:38 2010
T:6552 Error in program 'listenerrfc': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.CC5, GWHOST=servername, GWSERV=3300
ERROR partner 'ipaddress:3300' not reached
TIME Fri Jul 16 04:58:38 2010
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -10
MODULE nixxi.cpp
LINE 2985
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
>TS> Fri Jul 16 05:00:43 2010
My apologies to Juan
Regards,
Vishi -
CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=244
Hi All,
I am getting the below short dump for Remote function call. I do not know the target system.
I would like to know the process through which I can know the target system from the dump.
I only have the short dump with me and want to know the possible reason for the short dump.
Runtime Errors CALL_FUNCTION_REMOTE_ERROR
Short text
"CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=244#Partner heeft de verbinding
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WFD_HCM_ADA================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The error occurred during an RFC call to another system.
In the target system, a short dump has been written as well.
More detailed information on the error cause can be found there.
Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name " "
on the called page.
Edited by: SAPsuchi on Apr 8, 2010 4:39 PMDear sir/madam,
I would like to know if you have solved this issue because I've the same problem.
Kind regards,
Jelmer Oenema -
Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' (managment cockpit)
Hi Friends,
I'm getting following error, while accesing BI query data in management cockpit.
ODBO Error:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Pls suggest me steps to resolve issue.
thanks,
nareshNaresh,
Couple of suggestions...If this thread is still relevant....or please close this thread...
1) Make sure you are not having any issues with running the query, try running it directly in BEX/RSRT.
2)Once we know that there is no issue with teh query...try running the Trace on the user (ST05) to get further details on the error by trying to run it from management cockpit..
3) Check Note 1285242 - CPIC-CALL: 'ThSAPCMRCV' no data received.
Hope this helps..
Vishal. -
Timeout during allocate / CPIC-CALL: ThSAPCMRCV
We have the error: "timeout during allocate / CPIC-CALL: ThSAPCMRCV" when test our RFC "MDX PARSER". Windows 2003 x64 Server, SAP NetWeaver 7.0 Unicode. We read notes about this error (for example 1032461) but we have another problem. Our problem concerned librfc32.dll registration (we doing this using command: regsvr32 C:\Windows\system32\librfc32.dll) because of this we can't starts mdxsvr. Anybody doing same operation on Windows 2003 x64 server?
Hi
I think you should post this in basis and security forum.
Cheers
Chanda -
CPIC-CALL Transaction program not registered Error while creating RFC Desti
Hi All,
I am trying to create a new RFC Destination.
Details I have provided are..
1.RFC Destination Name
2.Connection Type - TCP/IP
3.Description
4. Activation Type - Registered Server Program.
5.Program Id.
6. Gateway Host and Gateway Service.
But When I Test the connection, I am getting the following error.
<b>" program xyz not registered / CPIC-CALL: 'ThSAPECMINIT'# Transaction program not registered"</b>
However I was able to create and connect RFC Destinations successfully previously.
I am not SAP guy. Could someone help resolve this issue.
Thanks,
Phanihi Sekhar,
I request you to please help me out in this issue. I am getting similar kind of problem. I am trying to replicate the customer from CRM to R/3 and i get a bdoc message in SMW01 that "RFC connection failed please press the save button again". When the basis team further investigated they came up with the below error..
User: CRREMOTE (Client: 071)
Destination: OCR (handle: 1, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1462
CPIC-CALL: 'ThSAPECMINIT'
Transaction program not registered
DEST =OCR
HOST =%%RFCSERVER%%
PROG =dpssrfc
Trace file opened at 20061121 140451 EST SAP-REL 640,0,109 RFC-VER
3 804778
resize I/O buffer to 28000 bytes
>>>> [2] MQ_LINK : TCP <ac: 3> K %%RFCSERVER%% >>> OPEN
{45632F14-288E-0046-0000-0000A888A7AA}-
======> CPIC-CALL: 'ThSAPECMINIT'
can you please tell me where can be probelm. Regarding your message, where can i get the communication channel to assign the program id.
Awaiting your reply,
Thanks & Regards,
Yogesh -
Sap to non sap connection ( program not registered/cpic-call
Hi all,
Im trying to connect sap to siebel system.IN TCP/IP connections iv selected register program id & passed the parameters ...program id,gateway host and gateway service
i followed michal krawczyk steps & also checked in smgw
transaction also but program id is not registered there
im getting error like program sapprog not registerd cpic/call
<b>Detailed error</b>
<b>Error</b> - program sapprog is not registsred
<b>location</b> - sap gateway on host saple / sapgw01
<b>detail</b> - Tp sapprog is not register
<b>component</b> - gateway
<b>counter</b> - 387
<b> module</b> -gwr3cpic
<b>line-</b> 1621
<b>return code</b> - 679
<b>subrc</b> - 0
please try to help me out in this issue. all inputs r rewarded.
Regards,
LavanyaHi
Thanks prince,iv checked entries in sm59, i checked smgw tranaction(gateway monitor) for logged on clients
its showing like this
number/luname/tpname/sys.type/hostname/hostaddres/last req
0 /sapnav/sapgw00/local_r3/sapnav.sapdomain.com/192.158.3.219
if i double click on above...
read/write socket = 4
handle = 4
time = tue jan 26 16:54:13 2006
socket = 1652
stat = ni_connected
type = stream ipv4
out = 1122 messages 64 bytes
in = 1 messages 64 bytes
local =127.0.0.1:3300
remote = 127.0.0.1:1848
options =
lu = sapnav
tp = sapgw00
lon lu = sapnav
long tp = sapgw00
ext program = 0
no conversation = 24
appc version = 6
hostaddr[0] =
hostaddr[1] = 127.0.0.1
offset in = 0
timeouts in = 0
connected = tue jan 24
last req = mon jan
request block number in= -1
connection out = -1
target out = -1
offset out = 0
restlen out = 0
timeouts out = 0
request block number out = -1
accept info = einfo
snc forced = 0
<b>just see gateway monitor 4 sapnav/parameters & attributes</b>Profile
parameter Value
gw/max_sleep 20
gw/conn_disconnect 900
gw/conn_pending 60
gw/gw_disconnect 1800
gw/req_stack_size 30
gw/max_conn 500
gw/max_wp 0
gw/max_conn_per_wp 10
gw/cpic_timeout 20
gw/deallocate_timeout 600
gw/reg_timeout 60
gw/reg_lb_level 1
gw/reg_lb_default 20
gw/side_info C:\usr\sap\D01\DVMGS00\data\sideinfo.DAT
gw/sec_info C:\usr\sap\D01\DVMGS00\data\secinfo.DAT
gw/startup C:\usr\sap\D01\DVMGS00\data\gwstartup.DAT
gw/stat 0
gw/tcp_security 1
gw/cpic_security 1
gw/max_sys 300
gw/max_shm_req 50
gw/max_shm_req_per_conn 10
gw/max_overflow_size 5000000
gw/max_overflow_usage 10
gw/keepalive 300
gw/reg_keepalive 300
gw/compatibility 0
gw/monitor 1
gw/netstat_once 1
gw/close_routes 120
gw/timeout 0
gw/internal_timeout 0
gw/nitrace 0
gw/accept_remote_trace_level 1
gw/resolve_timeout 0
rdisp/max_gateways 100
rdisp/max_comm_entries 500
rdisp/sna_gateway sapnav
rdisp/sna_gw_service sapgw00
rdisp/TRACE_LOGGING OFF
gw/rem_start REMOTE_SHELL
gw/remsh rsh
exe/gwrd C:\usr\sap\D01\SYS\exe\run\gwrd.EXE
snc/enable 0
snc/permit_insecure_start 0
Attributes
Release 640
Release no 6400
internal version 2
start time Tue Jan 24 16:53:47 2006
build time Aug 17 2004 23:33:51
build with Unicode TRUE
build with Threads TRUE
gateway hostname sapnav
gateway service sapgw00
req_sync_limit 24
appc_ca_blk_size 34396
gwreq_ln 34588
appcdata_ln 34316
overflow_size_limit 500000
overflow_use 0
trace level 1
trace level external programs 2
PID Gateway Reader 4952
internal version 2
Shared memory Sizes in bytes
CONN_TBL entry 1748
CONN_TBL total 874000
STATISTIC area 1392
iv changed some values for my safety.plz check it and let me know the error to register program id. Hope ull solve my issue this time.
Thanks in advance,
Lavanya. -
Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
BrunoHi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James -
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
I am having this error pop up very frequently on some new SAP systems. This will randomly happen and keep us from being able to release transports and import them in STMS. I receive the following error:
There was an attempt to start the transport control program tp using the local RFC interface.
An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
- When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup (check that partner exists
- When checking the TP System Log I receive the same error. The RSTPTEST report does not give any additional information. SM21 shows a warning and an error:
Warning:
Communication Error, CPIC return code 020, SAP Return code 456
Dialog Process No. 000
Problem cl: SAP web AS problem
Package: STSK
Further Details:
Module Name: thxxhead
Line: 7488
Error Text: 020456
Caller: ThRecei
Error:
Problem cl: transaction problem
Package: STTO
All of these errors are only pointing to a time out. I cannot figure out why this is happening. I checked the TMS RFC connection in SM59 and they are fine. I have been able to work around this issue in 2 different ways. First, I can delete the files in the "\trans\tmp" directory on the server. Sometimes this resolves the error. Else I have to restart the system.
I need to understand where this issue is coming from and how to resolve it. It is becoming more and more frequent. Thank you for your help!Hi,
i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
Symptoms were:
se38 > RSTPTEST timed out sometimes(not always)
sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
Transports failed mostly with the same error.
The error log was somewhere deep in ST11. It could not resolve our FQDN.
The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
127.0.0.1 localhost computer-name.ourSuffix.com
After this line has been added, the error stopped and the transports work again.
I hope it helps. Good luck. -
SAP ERP - CTS and Backup error CPIC-CALL: 'ThSAPCMRCV'
hello All,
I have some issues with transport system and when I try to schedule backup jobs in my ERP system. When I try to reconfigure my transport system the following message:
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
Al ejecutar el reporte RSTPTEST se presenta:
Check Transport Tool 12.10.2011 16:32:11
DES System DES
tp Interface
Transport Profile
RFC Destination
tp Call
I executed the report RSTPTEST and the result was successful.
Another error is generated when I try to schdule the backup jobs in DB13:
Name and Server : cobogsap01 - cobogsap01
DBMRFC Function : DBM_GETF
Command : DBMMDF
Error : System Error
Error Message : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20
I checked the connection between SAP and DB and is OK. I found in some forums and SAP Notes that this error can be fixed with a kernel update, so I updated the SAP kernel, TP and R3trans files but the error continue.
I don't know what more I've to check, so I need your help to solve this issue.
Thanks
HEPChello Michael,
I could fix the transport system, was a network issue, but the DB13 error continue, now when I test the DB connection the following error is show by the PRD system.
Connect. test with "dbmcli db_state" Unsuccessful
I decided to close this message and open another in MaxDB forum.
Thanks
HEPC
Edited by: Hernando Polanía C on Oct 18, 2011 6:32 PM
Maybe you are looking for
-
HT1338 iPhoto library won't open.
My iPhoto library was working fine until recently when I tried to import photos from my camera to my library. Now when I try to open iPhoto, I get a spinning wheel and none of the pictures in my library show up. I have the latest software update, an
-
ITunes doesn't fit my Samsung screen. Why is it too big?
The iTunes interface is too large for my Samsung screen. There is no menu bar at the top. What must I do to make it fit?
-
User-Exit/Badi for F-47/F-58
Hi All, I have a developed a custom workflow for f-47 (vendor down payment request). Now whenever the document is approved/rejected the status is stored in a custom ztable. This document is posted in f-58. My requirement is whenver the document is re
-
Labels in Property Manager in DW-MX - are large
DW-MX, Windows XP Pro SP-2, Ram 2G, 1024 x 768 Pixels screen Res - Dell Latitude 510 I opened DreamWeaver MX for the first time in several months. The property manager drop down menus and their labels have a font size that looks to be 2+ from what I
-
Good afternoon, I am new on oracle spatial and I have to do a simple spatial join view. So from two table name and a operation I have to create a view that makes a join of type "operation" between two table. For example, in a high level language: cre