Error in Proxy to RFC

Hai All,
Plz have a look at my scenario.
I am using proxies in my XI system itself .
landscape is XI--->R3
thatsit.
So here i have taken Two clients in XI lets say 105 and 100.I set
clnt105 is an APPlication System where as clnt100 is my Integrationserver.
Coming to the R3 iam using clnt900.
i created three business systems lets say BS_XICLNT105(APPL),BS_XICLNT100(IS),
BS_R3CLNT900(Appl).
My business system(BS_XICLNT100) for XIClnt100 is Integration server that i defined in SLD.
And wen i created the other two Business systems(Applications) it asked for the related integration server then i defined business system called BS_XICLNT100 (which is our integration server )for both the business systems.
Then i configured the objects based in BS_XICLNT105(APPL as sender) and BS_R3CLNT900(APPL As receiver).
In SXMB_MONI i am getting an error called Recievr not found.
But the message is going to IE.Its not recognizing AE due to recever problem.
Do i need these steps.
Step1.I mean any configuration or Connection is required for communicating the IE in XI and R3 application.
Step2.Or else I need to change the SLD part for Technical syst and Business sys.
Step3.I think XIAPPLUSER password is wrong.How can i reset that.
Any Suggetsions???
Regards,
Kalyan.

Hi
There can be number of reasons for this,,,,
lets move one by one to diagnosis...
firstly,,, in Integration directory, using configuration test tool,, is every thing fine.. ??
if configuration tool is showing every thing fine,, than u need to check few things...
the message being sent and URL being used should have correct (sender) namespace and sender system defined init.. do check this... to check this more.,.. copy the message from Sxmb_moni (sender side ) and paste it in message mapping test in IR and see if it parse through correctly
if still no clue...
go to rwb->adapter engine-->communication channel monitoring
and check the status of your communication channel
if still every thing seems fine,,, check the j2ee log and do share it with us
moreover i dont think u need reset ur appluser pasword,, because in that case u would have recieved authorization error straight away...
hope things get fine for you,,
good luck
regards
Zahid

Similar Messages

Error in Proxy

Error in Proxy
SSL_ERROR_CONNECTION_LOST
Performing the connection test by clicking the "Test Connection" in transaction SM59, I am getting ICM_HTTP_SSL_ERROR.

Hi,
Check the following threads:
ICM_HTTP_SSL_ERROR for plain HTTPS with RFC Destination type G
ICM_HTTP_SSL_ERROR
SSL_ERROR_CONNECTION_LOST
Error 'Create failed : Argument not found' in SM59
Thnx
Chirag

Java Proxy - XI - RFC Synchronous Scenario OUTBINDING Problem.

Java Proxy -> XI -> RFC Synchronous Scenario. Problem
Hi,
 I'm doing a Java Proxy -> XI -> RFC Syncronous Scenario.
 A Java Server Socket is running as a Demon. When a client make a request to the Java Server Socket, this one call Java Proxy Client and set up the parameters.
 The first time that execute the scenario it works perfectly but no the next one and so on.
 The error when I check the monitor (TCODE: SXMB_MONI) is in PLSRV_OUTBOUND_BINDING.
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="1" type="T">no outbound binding found.</Trace>
<Trace level="1" type="T">No standard agreement found for , DES210_DEV, , JPX_DEV, urn:servipago:SERVIPAGO_SAP_02, mi_os_t1</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
And it has sense, because my scenario doesn't begin with the execution of FM (RFC).
A Hint, my services in the first try are:
 Sender Service: JPX_DEV (Java Proxy Client)
 Receiver Service: DES210_DEV (R/3 4.6C)
But the second try and so on the services that I saw in the monitor are:
 Sender Service: DES210_DEV (R/3 4.6C)
 Receiver Service: JPX_DEV (Java Proxy Client)
I can't understand why they swich each other.
Any idea?

Hi,
Outbound binding problem is because of Reciever Determination/Agreement is not activated or refreshed correctly.
Try to recreate or refresh and activate it. Then check it.
also do the cache refresh in SXI_CACHE.
Also in go to Integration Builder(XI home page)->Administration->Cache Overview and do all the cache refresh.
Hope this helps
Regards,
Moorthy

HTTP_POST - Error when opening an RFC connection

Performing POST-query. Works well in simple program, and in WebDynpro application:
Error when opening an RFC connection
l_dest = 'SAPHTTP'.
 CALL FUNCTION 'HTTP_POST'
 EXPORTING
 absolute_uri = l_uri
 rfc_destination = l_dest
 user = l_username
 password = l_password
 blankstocrlf = 'Y'
 REQUEST_ENTITY_BODY_LENGTH =
 PROXY =
 PROXY_USER =
 PROXY_PASSWORD =
 IMPORTING
 status_code = l_status
 status_text = l_statustext
 response_entity_body_length = l_rlength
 TABLES
 request_entity_body = req_body
 request_headers = req_headers
 response_entity_body = res_body
 response_headers = res_headers
 EXCEPTIONS
 connect_failed = 1
 timeout = 2
 internal_error = 3
 tcpip_error = 4
 system_failure = 5
 communication_failure = 6
 OTHERS = 7
Edited by: S S on Nov 28, 2008 4:01 PM

You can't use SAPHTTP for the destination. This RFC destination uses the SAPGUI to make the HTTP call. Either use SAPHTTPA (the A stands for Application Server) or better yet use the newer CL_HTTP_CLIENT class. The class uses the ICM instead of a standalone executable to make HTTP calls.

MSGVERS_EXISTING error in proxy call

Hi gurus!!
We have the following scenario: 3rd party -- SOAP -- XI -- PROXY -- R/3
We get the following error in sxmb_moni:
<SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SAP:Category>XIServer</SAP:Category>
 <SAP:Code area="PERSIST">MSGVERS_EXISTING</SAP:Code>
 <SAP:P1>6CE331F05CE111DF9B710003BAABC4DB</SAP:P1>
 <SAP:P2>CENTRAL</SAP:P2>
 <SAP:P3>004</SAP:P3>
 <SAP:P4>(loc: WM8 ; IM_VERSION : 004 ; MAST_VERSION: 004 ; TC: SXMSPMAST ; SM: 0 ; RR: 0 )</SAP:P4>
 <SAP:AdditionalText/>
 <SAP:ApplicationFaultMessage namespace=""/>
 <SAP:Stack>Message ID 6CE331F05CE111DF9B710003BAABC4DB for pipeline CENTRAL, version 004, already exists in system
</SAP:Stack>
 <SAP:Retry>N</SAP:Retry>
</SAP:Error>
We have one Outbound Message but two inbounds, and we don't know why.
If we change proxy to RFC it works great.
Any help would be appreciated ^^
Thx!
Ignasi

Hi Ignasi,
It seems that the particular message id is already existing in your system.
Are you using proxy in XI system itself. Means message is coming from soap then you are passing it to proxy of same xi system. If you are doing like this then system will definitely give error. So instead of using proxy use RFC only.
also did not understand We have one Outbound Message but two inbounds, and we don't know why.
Edited by: Rajhans Abhay on May 11, 2010 12:51 PM

Error generating proxy

Hello:
I am trying to create a proxy and receive this error message in VS.Net. Has anyone else encountered this?
Thanks in advance.
Error in Proxy-Generator
To create a proxy directly from a SAP system, you must install a Java VM from JavaSoft
Inner error was:
INFO: using logging implementation "AII Logging"
Exception caught in method createFunction for DD_GET_UCLEN Reason: null
com.sap.aii.upload.api.NotFoundException: Object <rfc><ZMODIFY_SALES_ORDER> not found
 at com.sap.aii.upload.tool.RFC2WSDLTool.getWSDLforRFCs(RFC2WSDLTool.java:111)
 at com.sap.aii.upload.tool.RFC2WSDLTool.getWSDLforRFCs(RFC2WSDLTool.java:82)
 at com.sap.aii.upload.tool.RFC2WSDLTool.main(RFC2WSDLTool.java:196)
Exception in thread "main"
OK

Hitesh:
I don't think thats the case. I do have JVM installed. I can successfully create a proxy for some (for ex: ABAP4_COMMIT_WORK).
The actual error is in the details "com.sap.aii.upload.api.NotFoundException: Object <rfc><ZMODIFY_SALES_ORDER> not found". But the function module is there, created using SE37.
Thanks
Naresh

Powershell Error for SharePoint Online -"The remote server returned an error: (407) Proxy Authentication Required."

I am trying to call sharepoint online from powershell. Below is the code. I get
Exception calling "ExecuteQuery" with "0" argument(s): "The remote server returned an error: (407) Proxy Authentication Required."
$loadInfo1 = [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client")
$loadInfo2 = [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client.Runtime")
$webUrl = "ZZZZ"
$username = "XXX"
$password = "YYYY"
$ctx = New-Object Microsoft.SharePoint.Client.ClientContext($webUrl)
$ctx.Credentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($username, $password)
$web = $ctx.Web
$lists = $web.Lists
$ctx.Load($lists)
$ctx.ExecuteQuery()
$lists| select -Property Title
Raj-Shpt

Hi,
About how to access SharePoint online site using PowerShell, the blog below would be helpful:
http://social.technet.microsoft.com/wiki/contents/articles/29518.csom-sharepoint-powershell-reference-and-example-codes.aspx
Another two demos for your reference:
http://www.hartsteve.com/2013/06/sharepoint-online-powershell/
http://www.sharepointnutsandbolts.com/2013/12/Using-CSOM-in-PowerShell-scripts-with-Office365.html
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Finding an error while calling an RFC

Hi,
My requirement is as follows.
The internal table(ITAB) which i am using has a field X of length 20 and the Internal table(RFCITAB) field Y found the RFC is of length 10. Here i am creating another 3rd internal table(ITAB1) with field Z of length 10 and i am moving the content of field X from ITAB to ITAB1 and i am passing Z value of ITAB1 to the RFC.
While executing it i am getting the error 'Interface data error'.
please let me know why this error is getting populated.
Regards,
Sumi

Hi,
I have a field lenght of 20 digits in BKPF-AWKEY and it has value of only 10 digits.
I am moving this 10 digits to a new field in a new internal table and i am passing this value to the RFC.
I am getting error while calling the RFC.
Regards,
Yamini.A

Error while calling up RFC Message No. UPC202

Hi Experts,
Calling Thru Trans code : BPS0 in ECC6.
Getting This Error :
Error while calling up RFC message No. UPC202.
After i check in BW with Trans code : ST22
Following this error message:
Category Internal Kernal Error
Runtime Errors PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC.
More details Please find attached file.
Thanks & Regards,
Mohammed Kaleem.

Hi Mohammed,
If you are getting this error currently Please go to Sap market Place and Search with the Key words of Short Dump " PARAMETER_CONVERSION_ERROR".
Also you can raise this with your Basis team who should be able to help you out with the same.
Thanks & Regards,
RDS

Error while calling up RFC

Hi GuRuS,
I am working on BI 7.0. When I open the BPS workbench using Transaction bps0 and select the planning area 4TPM9000, and click on either "Variables" tab or "Master Data" tab or when I click on "Adhoc Package", I get this error " You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated: Error while calling up RFC. "
FYI I have done RFC connections between my CRM 2007 system and BI 7.0 system using Tr.SM59 and checked the connections from both the ends and it is working fine. So, pls show me the way out.
Thanks in advance,
Raghu

Hi...
The roles SAP_ALL and SAP_NEW are assigned for the RFCUser.
Regards,
Raghu

Error authenticating proxy while running agent job

I am trying to schedule a SSIS2014 package via SQL Server Agent job. Both SSIS and SSMS are running on my local machine in the same domain. I am running SSMS with the same user
Domain\Admin which is the creator of the SSIS package. SSMS 32-Bit and SSIS 32-Bit are running on Windows 7 64-Bit machine. I can run the package within SSIS without problems.
When I use a proxy account to run the job step, the following message occurs:
Unable to start execution of step 1 (reason: Error authenticating proxy `Domain\Admin`, system error: Logon failure: unknown user name or bad password.). The step failed.
The proxy account uses the credentials identity Domain\Admin. Since the password fields for credential properties in SSMS cannot be left blank, I typed any password although my corresponding windows account has no password. So as mentioned above
it's the same user account that created the SSIS package since Domain\Admin is stated in the CreatorName property of the SSIS package.
With this proxy, I tried to run SSIS jobs using the package ProtectionLevel's
EncryptSensitiveWithUserKey and EncryptSensitiveWithPassword. Running the package manually within SSDT without problems, but from SSMS agent job the same error message appears. I tried the package sources "File System" and, after
importing the package to MSDB, "SQL Server" and "SSIS Package Store". But exactly the same error message appears with each method.
Task manager shows that SSMS is running in administrator mode. Using Windows Component Services I added DCOM permissions for
Domain\Admin to start and activate "Microsoft SQL Server Integration Services 12.0" from local. But the same error message appears. So in my opinion it's a problem with SSMS user account permissions (???) but unfortunately I don't know
what exactly to do here. I tried the following:
In the system database MSDB (full path: Databases / System Databases / MSDB / Security / Logins) I assigned all available role memberships (Including db_ssisoperator, db_ssisltduser, db_ssisadmin) to
Domain\Admin.
In server security (full path: Security / Logins) I assigned all available server roles. In the tab User Mapping, I assigned the MSDB database.
Still the same error message appears when I try to run the job. Does anybody have some ideas what I can try?

If you use the Agent then set the package protection to "Rely on server".
Then Domain/Admin is probably not an actual proxy but the account the Agent is running under, in this or even any case follow http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/ to create the
proper proxy for the packages.
Arthur My Blog

Java Communication error:Error while opening an RFC connection

Hi,
I am getting Java Communication error:Error while opening an RFC connection when i try to run a query from Bex analyser.
please let me know how to resolve this
Thanks
Bala Duvvuri

This error usually comes when the java stack is not upgraded.
when you upgrade yourABAP stack, simultaneously you have to upgrade the java stack also.
Please co-ordinate with your basis team to inform EP team to upgrade the java stack when basis team do ABAP stack upgrade.
Hope this would help you.

Error while importing an RFC from R/3

Hello,
I am getting the following error while importing an RFC from an R/3 system in the Repository:
***Ready for import***
Import started...
/XXX/YYY_CREATE_NOTIFICATION:
+ com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: PERMISSION_ERROR
Import failed with 1 error
Does any one know what is required? Is it missign authorizations on the R/3 side or on the XI side?
Thank you,
Sumant.

Hi,
please check your User (used for importing RFC) authorizations,
it should have RFC authorization .
Thanks,
Madhav
Note: Points If Useful.

Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679

Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
Bruno

Hi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James

Error when opening an RFC connection (LB : Hostname or service of the messa

Hi All,
Im trying to transport datasources in BW, they are 7.x RSDS datasources. but we did not change the source system, it was existing and we are using the same source for older BW version. we now installing new BW 7.x system.
These transports went fine in BQ system but failing in BP system with the below error :
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when activating DataSource 2LIS_17_I0NOTIF RP1CLT100
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when resetting DataSource 2LIS_17_I0NOTIF RP1CLT100 to the active version
the datasource 2LIS_17_I0NOTIF is active in RP1CLT100 system. when this transport goes to prod it tries to overwrite the existing one, as there are no changes to the datasource the structure will be the same.
but after that it cant able to activate that datasource.
so my question is can we able to activate this datasource in RP rather than doing transport again from R/3 Dev---R/3 PRD.
i tried RSDS_DATASOURCE_ACTIVATE_ALL but it doesn't help.
another question is when we migrate from 3.x datasource to 7.x, does this change any metadata in R/3 system as well.
Best Regards
Robyn.

Hi Rizwan,
Looking at the error message it seems like there is some issue with RFC connection and whatever objects you are trying to move are not reaching to target system. Just have a check with basis team.
Once you migrate DS from 3.x to 7.0 yes there will be some meta data changes e.g. the DS type will be changed from ISFS to RSDS. You will have to send the migration along with current data source.
Regards,
Durgesh.

Error in Proxy to RFC

Similar Messages

Maybe you are looking for