Error in PSA Update

Hi,
I have this error in PSA Udate:
msg: "Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070530"
I have 10 records in PSA . 9 are ok. 1 record shows this error. 3 other records also have 0CALDAY = 20070530 as value. But, they did not return errors.
Why this particular record error ?
Thanks in advance

Hi Raj,
check this links:
Time conversion from u0085.Any help on this error in the PSA?
Re: Inventory Management extraction.
hope this helps
cheers
Sunil

Similar Messages

Error in PSA with special characters

Hello,
I'm having a problem with sprecial characters in PRD system.
This happen with standard extractor for Confirmations in SRM module, 0BBP_TD_CONF_1.
I have 5 records with error in PSA. The field that have the error is 0bbp_delref and it has the text: GUIA ENTREGA Nº2.
The error message says that field OBBP_DELREF has special characters that are not supported by BW.
The field is char 16 and in spro I have the characters:
QWERTYUIOPASDFGHJKLÇªNºZXCVBM/~^´`* '()"#$%&!?.-0123456789Â«»<>
In QUA, I created confirmations with this text and it worked fine and the characters in SPRO are the same.
Any idea?
Thanks and best regards,
Maria

Hi Maria,
There will be no issue with update rules as the issue is with Data..
ALL_CAPITAL should resolve your issue, .otherwise try individually executing those spl characters in RSKC..
have you tried in SPRO...
Check in this table RSALLOWEDCHAR in SE11 and find what all characters allowed(permitted) in PRD system...
please go through the above mentioned blog once
Thanks,
Sudhakar.

Error in PSA

Hi
While loading the Attributes, I get the following error:
CostcentX: Data record XXX (1000EI300E) :Duplicate data record.
Everything looks apparently alright. I am unable to understand the error and also how to correct the same. Any lead would be appreciated.

You should not load duplicate records when loading master data. You have two options -
1) Work with your process teams and understand why there are two records for a given master data object value and eliminate it in the source system.
2) In the infopackage, you have the option, LOAD TO PSA -> UPDATE FURTHER DATATARGETS and IGNORE DUPLICATE RECORDS. Check these two options and this will eliminate the error.
Hope this helps.

Removal of error from psa

hi friends
can any one tell me how can we remove an error from psa
thanks in advance
with regards
kalyan

Hi,
   Using the Error Handling function on the Update Parameters tab page in the scheduler, you can control the behavior of the BI system if data records with errors occur in the data flow with 3.x objects (use of transfer and update rules) when you are loading data using the PSA.
The system checks for data records with errors:
      in the transfer rules
      in the update rules
      when data is updated to the master data tables, text tables, or hierarchy tables
      when data is updated to the InfoCube
      when checking for referential integrity within an InfoObject against the master data tables or DataStore objects on the communication structure level.
Features
Incorrect records arising in transfer rules, update rules, when updating to a data target, or when checking for referential integrity, are highlighted and returned to the error handler. The error handler locates the original PSA records and writes the corresponding log. This function is not yet available for updating to DataStore objects.
Using the Error Handling function on the Update Parameters tab page in the scheduler, you can control how the system responds to incorrect data records.
Activities
       1.      Define how the system should react to incorrect data records
a.       No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
b.       Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request (using a QM action, that is, by setting the Overall status on the Status tab page in the monitor).
c.       Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
With option a), the incorrect records are marked in red in the PSA maintenance. You can display the relevant error messages amodally, edit the records, and update the request manually. If it was not possible to write to the PSA (hierarchy or transfer method IDoc), an application log is written instead.
With options b) and c), a new request that is only updated to the PSA is formed from the incorrect records. Here you can edit the records of the new request in the PSA and start the update manually.
If errors arise when an InfoCube is updated, new requests are generated for incorrect records for each InfoCube combination. Among these requests, the incorrect records are updated to the PSA. These new requests have entered as data targets the InfoCubes for which there were incorrect records. If, for example, a record was updated to two InfoCubes by mistake, a request is generated for this record that contains both InfoCubes as data targets. In the PSA tree, the requests appear as successfully updated in the PSA. These new requests can then be triggered again for updating to the InfoCubes.
       2.      Specify the maximum number of incorrect data records that are allowed before the system terminates the load process. In the PSA, you can display the errors that have arisen up to that point. If you do not specify the maximum number of incorrect records after which termination should occur, the handling of incorrect data records is inactive and the update terminates after the first error.
       3.      Define how the BI system should react if the number of data records received by the BI system is not the same as the number of data records updated in BI.
A difference between the number of received and updated records can occur:
         in the transfer rules
         in the update rules
         when updating
Records are sorted, aggregated, or added.
If you set the No Aggregation Permitted indicator, the request is deemed incorrect if the number of received records is not the same as the number of updated records.
Regardless of this indicator, an error occurs if the number of selected records is not the same as the number of records received in the BI system.
Result
The monitor directs the user to the relevant error case and enables a direct navigation into the PSA or the respective error request.
If you want to continue processing the incorrect data records in a program that you have written yourself, you can use the method GET_ERRORS of class CL_RSSM_ERROR_HANDLER. The use of this method is documented in the RS_ERRORLOG_EXAMPLE.
To perform complex checks on data records, or to carry out specific changes to data records regularly, you can use delivered function modules (PSA-APIs) to program against a PSA table.
If you want to execute data validation with program support, select Tools ® ABAP Workbench ® Development ® ABAP Editor and create a program.
If you use transfer routines or update routines it may be necessary to read data in the PSA table afterwards.
Employee bonuses are loaded into an InfoCube and sales figures for employees are loaded into a PSA table. If an employees bonus is to be calculated in a routine in the transformation, in accordance with his/her sales, the sales must be read from the PSA table.
       1.      Call up the function module RSSM_API_REQUEST_GET to get a list of requests with request ID for a particular InfoSource of a particular type. You have the option of restricting request output using a time restriction and/or the transfer method.
You must know the request ID, as the request ID is the key that makes managing data records in the PSA possible.
       2.      With the request information received so far, and with the help of the function module, you can
         read RSAR_ODS_API_GET data records from the PSA table
         write RSAR_ODS_API_PUT changed data records in the PSA table.
RSAR_ODS_API_GET
You can call up the function module RSAR_ODS_API_GET with the list of request IDs given by the function module RSSM_API_REQUEST_GET. The function module RSAR_ODS_API_GET no longer recognizes InfoSources on the interface, rather it recognizes the request IDs instead. With the parameter I_T_SELECTIONS, you can restrict reading data records in the PSA table with reference to the fields of the transfer structure. In your program, the selections are filled and transferred to the parameter I_T_SELECTIONS.
The import parameter causes the function module to output the data records in the parameter E_T_DATA. Data output is unstructured, since the function module RSAR_ODS_API_GET works generically, and therefore does not recognize the specific structure of the PSA. You can find information on the field in the PSA table using the parameter E_T_RSFIELDTXT.
RSAR_ODS_API_PUT
After merging or checking and subsequently changing the data, you can write the altered data records into the PSA table with the function module RSAR_ODS_API_PUT. To be able to write request data into the table with the help of this function module, you have to enter the corresponding request ID. The parameter E_T_DATA contains the changed data records.

Error 4 in update

Hi All
While loading data into PSA, I am getting an error message.
Error 4 in update.
I understand that this is an error message for SID.
But I am not able to see any other message than this.
So , I am confused, how to make out which master data to load.
Kindly help.
Regards

Hi
Goto details tab.
Expand the erroreneous data packet
check both in proccesing and update
If you are not able to see the error there, then
Go to PSA button that you can see in the monitoring screen of the IP.
select the data packet which is having error.
selesct only erroreneous records.
Now in the psa double click the sysmbol you get for error recods.
It will give the error message.
Copy the message, and hence you will know for what value it is failing.
Then you can proceed normally with the steps of solving sid
Hope this helps
Regards
Shilpa

Error 18 in Update

Hi,.
While loading data to infocube, I get error as 'Error 18 in Update'. The data is loaded successfully in PSA. (Verified this by checking option 'Only PSA' in Update tab of infopackage). The data target is standard Quality Management infocube and it follows 3.5 data flow . We are using Support package 17.
As suggested in previous threads, I have activated all update rules, transfer rules,infocube. I have also included 'ALL_CAPITAL', ALL_CAPITAL_HEX, in RSKC. However the error still persists.
Can anyone please help?
Regards
Mohit

Hi,
Please go through the SAP Note below.
[Note 1162433 - Error 18 in update (Support Package 17)|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1162433]
Regards,
Gaurav

Unknown error in PSA

Hi All,
can anyone tell me reason for this error to occur while loading from ODS to cube and the way to correct the below mentioned error in PSA...
"Record 0 :Error in a formula function (routine ROUTINE_0002 ), record 0 "?
Thanks for your quick reply.
NAV

Hi NAV,
It seems the error is in the routine you have written in the transfer rules or update rules. Check the Routines u have written first.
It may solve the problem..
Thanks,
Phani

Error 4 in update or RSAR 119

Hi Gurus,
I got the following error Error 4 in update or RSAR 119.
Error check load is IS_IBm_TD.
I checked the details in the monitor session. I noticed the status as green . But it is showing red for PSA maintainence error
I did according to the procedure. Even I did simulated the update but it is of no use.
Any help is highly appreciated,
Namrata

HI
If you're using a DSO before the InfoCube
T-CODE: RSRV
Tests in Transaction RSRV
--> All Elementary Tests
--> ODS Objects
--> Check the Status of the Generated Program of a Data Store Object
Double-click. Put the name of your DSO and execute
If a red-light appears means, go back one-step and press "Correct error"
It's suppose that a Green Light should appear.
or another you can try for below
Have you execute the program RSDD_RSTMPLWIDTP_GEN_ALL with the following parameters?
p_prov (Infocube Name): leave it empty
p_ic_act: 'X' activates an active InfoCube if WIPROGID is empty.
p_pg_gen: 'X' generates all write programs for active InfoCubes
Hope this would be help ful to you
Many thanks
kiran

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

Error U44M1P7 while updating Photoshop CC

I got allways this error code while updating PS CC using Adobe Creative Cloud.
What do i do?
Harry

http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
Mylenium

Error U44M1l11 when updating Photoshop CC

I got this message when I try to update Photoshop CC: Error U44M1l11. Any idea?
Thks!

Take a look at this article:
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
Alessandro.

SCCM 2012 SP1 errors when downloading updates

Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
The Environment is:
Server 2008 R2
SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
trying to get it from. I then see the .1 removed from the directory name and there are updates within them.
Just for clarity here are the steps I go through from SCUP to Syncing...
Log in to WSUS server
Run SCUP as administrator
Get notified there are updates from Adobe and let SCUP download updates
Find the updates the specify the following publishing options
Full Content
Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
Then click Next
After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
What am I missing?
Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
then I waited, maybe 30 days or so before I could add the updates back in.
Thanks for the help!

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Have you seen the note at the bottom of this page about this error?
http://technet.microsoft.com/en-us/library/bb932193.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

There was a problem updating InDesign CC For more information see the specific error below. Update Failed Download error. Press Retry to try again or contact customer support.(49)

Posted the entire text from the error window, when trying to update, using the normal NON-TECHIE way to update any and all Adobe CC products, via the Creative Cloud updater installed when Adobe Creative Cloud subscription was purchased when first offered.
The following occurs, ad nauseam:
There was a problem updating InDesign CC
For more information see the specific error below.
Update Failed
Download error. Press Retry to try again or contact customer support.(49)
Here's the crux of my frustration:
(1) Customer Service is NOT contact-able, to receive LIVE help.
(2) There is NO way for me to mitigate this "Download error", being a student learning InDesign, and NOT in any way capable of tweaking folders/files here and there.
Therefore, the real question:
Given that a significant number of subscribers are having the above referenced issue with attempting to download the current update for InDesign, WHAT ARE WE SUPPOSED TO DO, in order to get our contractually paid-for updates to our legally and contractually paid-for Adobe software, specifically in my case, InDesgin's current update?
Please, NO TECHNICAL mumbo-jumbo which most likely will cause the overwhelming majority of users, like me, to seriously corrupt their computer files, but rather an honest, straightforward "what to do" from real CS/Engineers working for Adobe, as to how to FIX this issue, period.
===========================================================
UPDATE:
Here is a way in which I think I was able to "update" my InDesign CC application:
(1) Sign-In to your Adobe Account
https://www.adobe.com/
(2) Click on the MENU icon
(3) Click on the product InDesign icon
Your browser should display the page for Adobe InDesign CC
https://www.adobe.com/products/indesign.html?promoid=KLXLU
(4) Click on the Download icon,
Your browser should now display the page to download InDesign,
https://creative.adobe.com/products/download/indesign
(5) a Pop-Up window should open, and display:
Launch Application
This link needs to be opened with an application.
with the first option to select being the CreativeCloud(URIHandler)
(5) Select this application and click OK.
What happened when I followed steps (1) thorugh (5) is that:
(a) InDesign CC(2014) was installed,
(b) InDesign CC, updated, and then
(c) InDesign CC(2014), also updated.
Why this all worked, is a mystery to me.
Looks like a separate, "new" version of InDesign, InDesign CC(2014), was installed, the existing "old" InDesign was updated, and then the newly installed Indesign CC(2014) was further updated.
A BIT MORE, when I launched my InDesign CC app, and checked to see if there were Updates Available, there in fact was an Adobe InDesign CC 64 bit (9.2.2) update.
I clicked on UPDATE and my "old" InDesign CC app was "successfully updated."
FURTHER INFO: I may have neglected to list some important info ... OS: Windows 8.1 Pro with Media Center, 64-bit
Confused, I am able to launch BOTH of these apps, and hopefully I may use one of these versions of the InDesign CC app, to do some InDesign work.
Will keep y'all posted!
Message was edited by: Richard Yapkowitz, about an hour after I first posted this issue.

Jackdan error 49 indicates the installer was unable to access a critical file or directory. You can find additional details at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

'L_CHAVL_IN' Error while Activating Update Rules.

Hi All,
 when i am tring to activate my update rules, it is giving error, field "L_CHAVL_IN' in unknown. I dont have that field in my objects.
 i found that field in 'Progarm' for the update rules. that field is used in the exit of one of the feild in the update rules.
 Please give me a solution how to solve this.
Regards,
Ramana.

Check the following SAP Note (# 782858)
Symptom
When you activate the update rules, the system issues a syntax error: 'Syntax error: Field "L_CHAVL_IN" is unknown'.
Other terms
Syntax error; generation; l_chavl_in; update rules
Reason and Prerequisites
This is a program error. The error only occurs under the following circumstances:
You generate an optimized update rule;
An alpha conversion is required.
Solution
BW 3.0B
 Import Support Package 25 for BW 3.0B (BW3.0B Support Package 25 or SAPKW30B25) into your BW system. The Support Package will be available once note 0723254 with the short text, "SAPBWNews BW3.0B Support Package 25", which describes the Support Package in more detail, is released for customers.
BW 3.10 Content
 Import Support Package 19 for BW 3.10 (BW3.10 Support Package 19 or SAPKW31019) into your BW system. The Support Package will be available once note 0723261 with the short text, "SAPBWNews BW 3.1 Content Support Package 19", which describes the Support Package in more detail, is released for customers.
BW 3.50
 Import Support Package 10 for BW 3.5 (BW3.50 Support Package 10 or SAPKW35010) into your BW system. The Support Package will be available oncenote 0763336 with the short text, "SAPBWNews BW Support Package 10 NetWeaver'04 stack 10", which describes the Support Package in more detail, is released for customers.
Assign pts if helpful.

Error while schedulingg update stat in db13

Dear Experts,
Please look into my issue we are facing an error while scheduling update statistics in db13 and I tried to open detailed log
It is given
SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: program_start_error: For More Information, See SYS
Please help me how to solve this my error
Regards

Hi,
Check the owner for BRBACKUP, BRARCHIVE, and BRCONNECT in kernel,
these files should be with SIDADM, if not change the owner to SIDADM and rerun the update stats.
and also Refer the note 446172
Regards,
Ram

Error in PSA Update

Similar Messages

Maybe you are looking for