Error in reading core on Solaris 2.8 using pstack command

We are unable to read core file on Solaris 2.8 using pstack command. We are getting warning that librtld_db failed to initialize; symbols from shared libraries will not be available.
Man page of pstack says that such error can occur if a core file from one operating system release is examined on a different operating system release.
But we are trying to read the core on the same machine on which it occurred.
Does any one know what could be reason and what are the alternative to read core in such situation?

Dear Gopinath,
Thanks for the response.
The problem occurred again.
In fact now it is repeatable.
We have not installed any Solaris patches after original OS installation. We have checked the core using pstack immediately after it was dumped.
We have tried reading it using dbx but it is also giving same error.
Here is the output of dbx
dbx: could not initialize rtld_db.so -- verify that corefile was generated on a compatible machine
Note: We compile our program on Solaris 2.6 as 32 bit and then install it on Solatis 2.8.
We have tried reading the core using dbx on both Solaris 2.6 as well as Solaris 2.8.
We know that this must be problem in our program (some memory violation) and has nothing to do with 2.8 or 2.6.
But inability to analyze core is happering the debugging.
Thanks
Dhananjay

Similar Messages

  • Recently bought  a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found."

    Recently bought  a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found. Would you like to locate it?" Hope you can help me solve this issue.
    Thanks,
    Shellyboo

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • Compilation error - cannot read filename

    Hello,
    I am just a starter in Java. I have installed the standard Development kit j2sdk1.4.1_01 on a Windows NT machine. The installation went well.
    When I tried compiling my first file HelloWorldApp.java which is in a directory java, it gave the error 'cannot read: HelloWorldApp.java',
    I have set the path command correctly and typed the following command:
    C:>Java>javac HelloWorldApp.java on the command prompt.
    It is giving same error for other files also, can anyone tell me what is the problem?
    Thanks,
    Sunil

    The error comes from the javac compiler when it can not find the file that you specified. In your case, it is saying that it can not find a file named HelloWorldApp.java in the c:\java directory.
    It is common for this error to be caused by the editor you used to create the file, if the editor is like Notepad. Notepad will append .txt to the file name. If you use the dir command from c:\java you should see HelloWorldApp.java, not HelloWorldApp.java.txt. If that is the problem, a quick work around is to put double quotes around the file name when you save it to keep Notepad from adding .txt.
    http://java.sun.com/docs/books/tutorial/getStarted/cupojava/win32.html

  • Error while reading configuration (-6722)

    AirPort Utility shows my Airport Extreme. But when I select Manual Setup on the Extreme, there is a several minute delay followed by:
    An error occurred while reading the configuration
    Please make sure .... .... ... (-6722)
    I have been able to configure it before. I'm directly connected by cable. Internet and wireless through the device is working fine. It is at version 7.2.1. I have tried power cycling the device. IPv6 is off. I don't want to do a total reset of the device if I don't have to. Do I need to?
    This morning I performed Security Update 2007-009 (10.5.1) dated 12/21/2007. I can't tell if this is related since I hadn't accessed the configuration recently.
    Erik

    I also get this same message. After resetting the base station through both a soft and then a hard reset, I always now get the "An error occurred reading the configuration".
    I am using Airport Utility 5.3.1 and have a Base Station (Extreme N Fast Eth). I originally was trying to upgrade to the 7.3.1 update (because of security precaution reasons) and this was failing each time. So I tried a soft-reset.... and then the hard reset....
    and now it is back to the factory default (It is showing 7.2.1 ) and I cannot even get into it to reconfigure it! I am connected to the internet via the ethernet cable as the wifi no longer works
    Message was edited by: Gandi

  • Unable to Log-in *SAP System Message : Error while reading a Dynpro*

    Hi,
    We are facing issues while logging-in through SAP logon 710.
    The system throws an error dialog box with the below message:
    SAP System Message : Error while reading a Dynpro
    At the OS level Java process  server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

    Hi Please find the contents of std_server.out below.
    stdout/stderr redirect
    node name   : server0
    pid         : 4124
    system name : KEC
    system nr.  : 01
    started at  : Mon Jul 27 15:44:57 2009
    [Thr 5656] MtxInit: -2 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
    Loading: LogManager ... 250 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 47 ms.
    Loading: ThreadManager ... 16 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 93 ms.
    Loading: LockingManager ... 32 ms.
    Loading: ConfigurationManager ... 1032 ms.
    Loading: LicensingManager ... 0 ms.
    Loading: CacheManager ... 93 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service runtimeinfo started. (16 ms).
      Service cross started. (31 ms).
      Service file started. (31 ms).
      Service memory started. (31 ms).
      Service timeout started. (16 ms).
      Service trex.service started. (32 ms).
      Service userstore started. (0 ms).
      Service jmx_notification started. (15 ms).
      Service p4 started. (62 ms).
      Service classpath_resolver started. (16 ms).
      Service deploy started. (3722 ms).
      Service MigrationService started. (31 ms).
      Service bimmrdeployer started. (0 ms).
      Service log_configurator started. (5177 ms).
      Service locking started. (0 ms).
      Service http started. (126 ms).
      Service naming started. (157 ms).
      Service failover started. (16 ms).
      Service appclient started. (31 ms).
      Service javamail started. (47 ms).
      Service ts started. (47 ms).
      Service jmsconnector started. (47 ms).
      Service licensing started. (15 ms).
      Service connector started. (93 ms).
      Service iiop started. (94 ms).
      Service configuration started. (16 ms).
      Service webservices started. (265 ms).
      Service dbpool started. (1204 ms).
      Service UT started. (0 ms).
    Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
    Jul 27, 2009 3:45:09 PM  ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
      service com.sap.security.core.ume.service ================= ERROR =================
    Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

  • Error Message reads: unable to load

    Error Message Reads
    Resource Not Found
    Unable to Load
    Sync UI Core
    Localized.dll
    This is on a Windows operating system
    I was trying to burn some Itune content to CD's
    Now I have this error message
    Is anyone familiar with this message?
    Thank you

    Even though the following user tip is about iTunes install issues and launch issues, I think it's also worth a try with your error message too:
    Troubleshooting issues with iTunes for Windows updates

  • Error: Definition mx.core:RSLData could not be found.

    When i try to run this command :
    "mxmlc -static-link-runtime-shared-libraries=true -debug=true -load-config=C:\TestFlex4\flex-config1.xml -output=C:\TestFlex4\web\test1.swf c:\TestFlex4\web\test1.mxml"
    The follwing error stach trace shown:
    C:\TestFlex4\web>mxmlc -static-link-runtime-shared-libraries=true -debug=true -load-config=C:\TestFlex4\flex-config1.xml -output=C:\TestFlex4\web\test1.swf c:\infoTrakFlex4\web\test1.mxml
    Loading configuration file C:\TestFlex4\flex-config1.xml
    _test1_mx_managers_SystemManager.as(135): c
    ol: 35 Error: Access of possibly undefined property RSL_ADD_PRELOADED through a
    reference with static type Class.
            addEventListener(RSLEvent.RSL_ADD_PRELOADED, addPreloadedRSLHandler, fal
    se, 50);
                                      ^
    _test1_mx_managers_SystemManager.as(159): c
    ol: 35 Error: Access of possibly undefined property RSL_ADD_PRELOADED through a
    reference with static type Class.
            addEventListener(RSLEvent.RSL_ADD_PRELOADED, addPreloadedRSLHandler, fal
    se, 50);
                                      ^
    _test1_mx_managers_SystemManager.as(171): c
    ol: 13 Error: Access of undefined property allowDomainsInNewRSLs.
            if (allowDomainsInNewRSLs && _allowDomainParameters)
                ^
    _test1_mx_managers_SystemManager.as(180): c
    ol: 13 Error: Access of undefined property allowInsecureDomainsInNewRSLs.
            if (allowInsecureDomainsInNewRSLs && _allowInsecureDomainParameters)
                ^
    _test1_mx_managers_SystemManager.as(16): co
    l: 15 Error: Definition mx.core:RSLData could not be found.
    import mx.core.RSLData;
                  ^
    i have an existing code, whch i  want to try to run, but this error fail my compilation. i am new in flex, please tell me some solution.

    I resolve my error, there is conflict between flex 4.6 and 4.0. the code is based on 4.0, but i try to run this code on 4.6. so when i compile the code fron 4.0 the code compile successfully.

  • PDF from postscript (ps2pdf) displays "Insufficient data for an image" error in Reader

    Hello,
    I'm not fully confident this is the best place for this, but I'll start here. Note that this is NOT the same as the issue that was recently fixed in Reader 11 (found at http://helpx.adobe.com/acrobat/kb/insufficient-data-image.html)
    I am using the command "ps2pdf" (using Ghostscript) to convert postscript files to PDF. To get better quality, I use the ps2pdf options "-dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode", which force lossless encoding for color images. However, there are images on certain pages that yield the error "Insufficient data for an image" when opened in Adobe Reader XI (current version), and the image on that page is not viewable (or rather, it can be viewed, but only until you get the whole image on the screen; then the image disappears). If the PDF is printed, the image will not print. The error also occurs in Acrobat 9.4.0, and possibly other versions. However, Reader 8 displays the files with no issues. Also, Foxit reader displays the PDF files fine.
    The postscript files are screenshots generated by the user dragging a box to define the area of the screen to be printed to file. This issue only occurs for some size boxes that the user draws; others come out fine and are read by Reader just fine.
    This only happens when using FlateEncode; using lossy JPEG compression (e.g. the default ps2pdf output) does not yield files that produce the error.
    Here are some example files to demonstrate the issue (hey, maybe the issue is not even reproducible for other people! That would be helpful to know if true, so even if you can't help solve the problem, if you could verify whether this issue occurs when you open one of these files in Reader or Acrobat, it would awesome).
    bad pdf where error occurs: http://www.mediafire.com/file/zbk36yfy7vrhvhw/gmbad.pdf
    good pdf (very similar, but slightly different box drawn): http://www.mediafire.com/file/649fuxul0td5bsx/gmgood.pdf
    Merged good and bad: http://www.mediafire.com/file/54nwwebh3da7p9w/good_and_bad.pdf
    If anyone has any ideas on this issue, I would greatly appreciate it. Or if you think this isn't the right place for this, and perhaps know of a better place for my question, I'd appreciate that too. Thanks!
    Additional possibly relevant information:
    ps2pdf is being run using Ghostscript 8.15 on Unix Solaris 10. I also ran the same postscript files through ps2pdf (again using Ghostscript 8.15) on a Windows 7 machine, and the resulting PDFs did not exhibit the same errors when opened in Reader or Acrobat.
    Adobe Reader 8 and 11, and Foxit were run on Windows 7. Acrobat 9.4.0 was run through a Citrix server, and I'm not sure what version of Windows it runs on.
    I tried lots of different options in ps2pdf, and also tried running the postscript through ghostscript directly (using the "gs" command). Nothing was able to eliminate the error without resorting to using lossy JPEG compression.
    I am now using lossy (but fairly high quality) JPEG compression in the workflow, accepting the loss in quality and (paradoxically) doubled filesize of the JPEG-compressed PDF files, so I'm really just pursuing this to figure out what the heck is going on, not because it is mission critical.
    Postscript files used to create the above pdfs:
    bad: http://www.mediafire.com/file/v656dp45h2jeyj6/gmbad.ps
    good: http://www.mediafire.com/file/47sn60dgbzbxrs6/gmgood.ps
    The .ps files are very similar to each other, differing only in the image content and the image location/translation.
    The postscript files give multiple warnings/errors when opened in gsview (this happens with all .ps files created by Pinnacle, not just the ones giving me issues).
    The program that is used to create the postscript files is Philips (Adac) Pinnacle^3, a treatment planning system for radiation oncology.

    Hi, thanks for getting back to me so quickly.  Our application uses scanned images up to 10 years old, and there are thousands of images so we cannot rescan these unfortunately.   
    I work in a large organisation with it's own desktop team so unfortunately I can't upgrade the version of Reader on our user's machines to see if this resolves either.  The desktop team will also not upgrade the version as the problem appears to have only started in 9.5.2. 
    Does anyone know how I can confirm if the problem was first seen in 9.5.2 or if there were instances in 9.5.1 also?
    Thanks again

  • Confusing error building existing code on Solaris 10 Intel (AMD64)

    I have Solaris 10 on AMD64, using the bundled GCC
    gcc version 3.4.3 (csl-sol210-3_4-branch+sol_rpath)
    I'm attempting to build part of our large C++ application and am getting a strange link error:
    ld: fatal: relocation error: file: ./obj_g/amd64-solaris10-gcc40/mksdic.o section: .rel.debug_info symbol: : relocation against a discarded symbol,
            symbol is part of discarded section: .gnu.linkonce.t._ZNK18CompressedADFSARep21get_transition_vectorEv
    collect2: ld returned 1 exit statusThe mangled symbol (containing ADFSARep) refers to a member function in the code.
    Googling for this error only returns hits on people attempting to bootstrap GCC itself, and comes down to an incompatibility between Solaris ld and GNU ld. From what I've read elsewhere the recommendation is to use GNU as but Sun ld, so I'm completely confused.
    Simple C++ programs work fine, of course. The executable in question uses several .o files as well as a number of static libraries. However, I can get a similar error if I construct a command-line that just links two of the object files without including any of the static libraries.
    I also tried with GCC 4.0.x, same result.
    Any and all help and suggestions are appreciated.
    Tom Emerson

    Try to ask your question in Solaris 10 x86 forum, since the question seems to be amd64 specific.
    Also, could you provide (if possible) those two c++ files source which object files fail to link along with the command line.
    As a side note, would you consider an option to migrate your project to SunStudio?

  • Oracle.mds.persistence.MDSIOException: MDS-00521: error while reading docum

    Team,
    I am new to Oracle IDM. While I am doing some exercises I am getting the below error message,while I start the OIM server. I am able to run the weblogic server without any issues,
    Please check the below stack of error message.
    oracle.mds.exception.MDSRuntimeException: MDS-00521: error while reading document /last_update from metadata repository
    MDS-00521: error while reading document /last_update from metadata repository
    ORA-00942: table or view does not exist
    ORA-06512: at "DEVMAR_MDS.MDS_INTERNAL_SHREDDED", line 37
    ORA-06512: at "DEVMAR_MDS.MDS_INTERNAL_SHREDDED", line 633
    ORA-06512: at line 1
         at oracle.mds.internal.mopart.MOPartContentImpl.getInputSource(MOPartContentImpl.java:233)
         at oracle.mds.internal.model.BaseDocBuilder.executeInternal(BaseDocBuilder.java:358)
         at oracle.mds.internal.model.BaseDocBuilder.execute(BaseDocBuilder.java:180)
         at oracle.mds.internal.model.ContentModelPipeline.processPipeline(ContentModelPipeline.java:265)
         at oracle.mds.core.MOContent.fetchContent(MOContent.java:512)
         at oracle.mds.core.CachedMOContent.fetchContent(CachedMOContent.java:253)
         at oracle.mds.core.MOContent.getDocumentFromPipeline(MOContent.java:752)
         at oracle.mds.core.MOContent.getDocument(MOContent.java:669)
         at oracle.mds.core.MetadataObject.getContentWithRetry(MetadataObject.java:2388)
         at oracle.mds.core.MetadataObject.getDocument(MetadataObject.java:423)
         at oracle.mds.core.MetadataObject.getDocument(MetadataObject.java:370)
         at oracle.wsm.repository.mds.Session.getRepositoryInfo(Session.java:1880)
         at oracle.wsm.repository.mds.Session.isSeeded(Session.java:1980)
         at oracle.wsm.policymanager.bean.UpgradeManagerBean.seedWSMPolicyRepository(UpgradeManagerBean.java:508)
         at oracle.wsm.policymanager.web.PolicyManagerValidator.init(PolicyManagerValidator.java:111)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
         at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
         at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
         at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Thanks in advance...
    Regards
    Arun

    This seems issue with MDS schema. You can try two things:
    - Restart everything again (database and admin server as well)
    - If above doesn't solve you problem. then there must problem while creating schema using RCU. Run RCU utility again, drop and recreate schema and reconfigure OIM.
    This is what I suspect. Other experts can jump in with better solution.
    regards,
    GP

  • ORA-19587: error occurred reading 16384 bytes at block number 1

    Hi,
    I am getting the following error after I run rman hot backup.
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of delete command on ORA_DISK_1 channel at 09/11/2007 02:01:03
    ORA-19587: error occurred reading 16384 bytes at block number 1
    ORA-27091: unable to queue I/O
    ORA-27069: attempt to do I/O beyond the range of the file
    Additional information: 1
    Additional information: 1
    Can anyone please advise. thanks

    Pardon me for not providing all the information.
    OS - Solaris 9 64bit
    RMAN Script:
    #!/bin/ksh
    # Script Name: rman_proddb_hot_bkp.sh
    # Version: 1.0 01-JUN-07
    # This script takes online backup of the database
    # Uncomment for tracing
    set -xv
    # ~~~~~ set the variables ~~~~~ #
    ORACLE_HOME=/u01/app/oraprd/product/10.2.0/db_1
    ORACLE_BASE=/u01/app/oraprd
    ORACLE_SID=proddb
    DATE_TODAY=`date +%d-%m-%y`
    # ~~~~~ set the enviroment ~~~~~ #
    HOME=/export/home/oraprd
    LOGNAME=oraprd
    export PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/ccs/bin:/usr/openwin/bin:/usr/local/bin:/usr/dt/bin
    export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/OPatch:$PATH
    export LD_LIBRARY_PATH=$ORACLE_HOME/lib
    SHELL=/usr/bin/ksh
    export HOME LOGNAME
    export ORACLE_HOME ORACLE_BASE ORACLE_SID
    export DATE_TODAY
    LOG_DIR=/var/local/logs
    export LOG_DIR
    # ~~~~~ Check if output file exists ~~~~~ #
    cd ${LOG_DIR}
    touch ${LOG_DIR}/rman_${ORACLE_SID}.${DATE_TODAY}_hot_bkp.log
    chmod 755 ${LOG_DIR}/rman_${ORACLE_SID}.${DATE_TODAY}_hot_bkp.log
    LOG_FILE=${LOG_DIR}/rman_${ORACLE_SID}.${DATE_TODAY}_hot_bkp.log
    export LOG_FILE
    # ~~~~~ start RMAN hot backup ~~~~~ #
    rman target / nocatalog log=${LOG_FILE} <<EOF
    run {
    sql "alter system archive log current";
    host 'sleep 30';
    crosscheck backup;
    crosscheck archivelog all;
    backup database plus archivelog tag "manual_hot_bkp_on_${DATE_TODAY}";
    delete noprompt expired backup;
    delete noprompt obsolete;
    exit;
    EOF
    OS Disk space: df -h
    Filesystem size used avail capacity Mounted on
    /dev/md/dsk/d60 16G 4.0G 12G 26% /u02
    /dev/md/dsk/d50 35G 25G 9.3G 73% /u01
    /dev/md/dsk/d70 1.9G 1.3G 585M 70% /u03
    /dev/md/dsk/d80 1.9G 1.3G 598M 69% /u04
    /dev/md/dsk/d90 325G 77G 245G 24% /u05
    /dev/md/dsk/d40 935M 210M 669M 24% /export/home
    FRA is 32G and is 20G at this stage. I get an error when I try to delete obsolete;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of delete command on ORA_DISK_1 channel at 09/12/2007 06:56:21
    ORA-19587: error occurred reading 16384 bytes at block number 1
    ORA-27091: unable to queue I/O
    ORA-27069: attempt to do I/O beyond the range of the file
    Additional information: 1
    Additional information: 1

  • [solved] Unexpected EOF error while reading

    Hi
    I created a bootable jumpstart DVD for x86, and erverything works up to the extract of the flash archive.
    During the extract, I receive this error:
    Extracted 2046.00 MB ( 92% of 2208.35 MB archive)
    Extracted 2047.00 MB ( 92% of 2208.35 MB archive)
    ERROR: Unexpected EOF error while reading (/cdrom/latest_archive)
    ERROR: Could not extract Flash archive
    ERROR: Flash installation failed
    Solaris installation program exited.
    The size of the archive on the DVD is ok.
    Any Idea?

    I solved it like this:
    - added the "-I" option to flar when the archive get created.
    - added the "-x /usr" option to flar to skip the /usr filesystem.
    - created and compressed a fs dump of /usr which I placed on the dvd.
    - added the ufsrestore of /usr to my jumpstart finish script.
    With this I got files smaller than 2gb on my isofs.
    --- Joris Vuffray

  • Error loading /jsp/core/server/ServerMonitoringPerformanceForm.jsp

    Hi all,
              i am using WL9.2 MP2 on RHEL, both 64 bit
              I have configured 1 admin server and a few managed servers.When i tried to see the performance of each server ( Home > Summary of Servers > server1 > Monitoring tab > Performance tab) i got the above error. The error exists regardless whether application is deployed.
              Is this an internal weblogic error?
              the error shown on the terminal console when i click on the link is below
              <BEA-423405> <An exception [javax.xml.transform.TransformerE                    xception: com.sun.org.apache.xml.internal.utils.WrappedRuntimeException: The entity name must immediately                     follow the '&' in the entity reference.] was thrown while rendering the content at [jsp/core/server/Serve                    rMonitoringPerformanceForm.jsp].
              javax.servlet.ServletException: javax.xml.transform.TransformerException: com.sun.org.apache.xml.internal. utils.WrappedRuntimeException: The entity name must immediately follow the '&' in the entity reference.
              at weblogic.servlet.jsp.PageContextImpl.handlePageException(PageContextImpl.java:409)
              at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jspService(__servermonitoring performanceform.java:144)
              at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
              at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:2 27)
              at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
              Truncated. see log file for complete stacktrace
              >
              <Aug 8, 2007 9:23:39 AM SGT> <Error> <netuix> <BEA-423137> <There was an error loading the requested URI / jsp/core/server/ServerMonitoringPerformanceForm.jsp.>
              Error on webpage
              Error opening /jsp/core/server/ServerMonitoringPerformanceForm.jsp.
              The source of this error is javax.servlet.ServletException: javax.xml.transform.TransformerException: com.sun.org.apache.xml.internal.utils.WrappedRuntimeException: The entity name must immediately follow the '&' in the entity reference. at weblogic.servlet.jsp.PageContextImpl.handlePageException(PageContextImpl.java:409) at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jspService(__servermonitoringperformanceform.java:144) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454) at org.apache.beehive.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:118) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:536) at com.bea.netuix.servlets.controls.content.NetuiContent.beginRender(NetuiContent.java:361) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:486) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:530) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:249) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:339) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:330) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:304) at com.bea.netuix.nf.UIControl.render(UIControl.java:597) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:434) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:147) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._default.__gridlayout._jspService(__gridlayout.java:267) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:124) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:81) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:62) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:482) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:530) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:249) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:339) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:330) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:304) at com.bea.netuix.nf.UIControl.render(UIControl.java:597) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:434) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:147) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._default.__gridlayout._jspService(__gridlayout.java:267) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:124) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:81) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:62) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:482) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:530) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:249) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:339) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:330) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:304) at com.bea.netuix.nf.UIControl.render(UIControl.java:597) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:434) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:147) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._default.__flowlayout._jspService(__flowlayout.java:263) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:124) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:81) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:62) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:482) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:530) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:249) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:339) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:330) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:304) at com.bea.netuix.nf.UIControl.render(UIControl.java:597) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:434) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:147) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._default.__gridlayout._jspService(__gridlayout.java:267) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:124) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:81) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:62) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:482) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:530) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:249) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:339) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:186) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:140) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:370) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:229) at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:195) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:180) at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:237) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:124) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3229) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2002) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1908) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1362) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
              Caused by
              javax.xml.transform.TransformerException: javax.xml.transform.TransformerException: com.sun.org.apache.xml.internal.utils.WrappedRuntimeException: The entity name must immediately follow the '&' in the entity reference. at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:654) at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:281) at com.bea.console.taglib.html.TemplateTag.doAfterBody(TemplateTag.java:102) at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jsp__tag15(__servermonitoringperformanceform.java:731) at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jsp__tag13(__servermonitoringperformanceform.java:661) at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jsp__tag12(__servermonitoringperformanceform.java:622) at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jsp__tag11(__servermonitoringperformanceform.java:581) at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jsp__tag1(__servermonitoringperformanceform.java:212) at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jspService(__servermonitoringperformanceform.java:137) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454) at org.apache.beehive.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:118) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:536) at com.bea.netuix.servlets.controls.content.NetuiContent.beginRender(NetuiContent.java:361) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:486) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:530) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:249) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:339) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:330) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:304) at com.bea.netuix.nf.UIControl.render(UIControl.java:597) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:434) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:147) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._default.__gridlayout._jspService(__gridlayout.java:267) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:124) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:81) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:62) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:482) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:530) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:249) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:339) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:330) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:304) at com.bea.netuix.nf.UIControl.render(UIControl.java:597) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:434) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:147) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._default.__gridlayout._jspService(__gridlayout.java:267) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:124) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:81) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:62) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:482) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:530) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:249) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:339) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:330) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:304) at com.bea.netuix.nf.UIControl.render(UIControl.java:597) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:434) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:147) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._default.__flowlayout._jspService(__flowlayout.java:263) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:124) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:81) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:62) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:482) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:530) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:249) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:339) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:330) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:304) at com.bea.netuix.nf.UIControl.render(UIControl.java:597) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:434) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:147) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._default.__gridlayout._jspService(__gridlayout.java:267) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:124) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:81) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:62) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:482) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:530) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:541) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:249) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:339) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:186) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:140) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:370) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:229) at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:195) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:180) at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:237) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:124) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3229) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2002) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1908) at weblogic.s

    i used sun's jdk instead of jrockit,problem resolved.

  • Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem net ti

    Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem next time it launches".  Except that it doesn't, I keep getting the same message and the program closes.  Does anyone know what I  can do to repair it?  Can't back up, can't do anything.

    There are dozens of threads in this forum that describe the fix

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

Maybe you are looking for

  • Winhttp 5.1 error on Windows 2008 R2

    Hi,  I have a VB Script that uses WinHttp.WinHttpRequest.5.1, it runs fine on Windows 7x64 and Windows 2003, but dies a horribly on Windows 2008R2.   I tried the STACKOVERFLOW suggestion of re-registering the dll, but that did not work.  After many f

  • TDS Report

    Hi We are using Extended With Holding Tax. But for India, there is no standard report in SAP, which gives the details of Vendor with name and details of TDS. The report J1INMIS is now not supported by SAP. We need to develop a report. which should be

  • Laser Jet 4000 TN

    Hello I have searched this forum for a few hours to find a solution. A lot of answers refer to HP Jet. I have no idea what that is. I connect using airport extreme and an ethernet cable. I did reset everything on my printer still no success. Anybody

  • Possible.. or impossible?

    is it possible to have Java edit/create a text document in a specific folder? and if the folder doesnt exist also create the folder? If you know how to do this please hook me up with some info :)

  • Can't open a PRE3 project in PRE8

    I can't seem to open a project I completed using PRE3, in PRE8. When I try to open it Loads Project up to 100% then says 'Sorry a serious error has occured that require APRE to shut down. We will attempt to save your current project.' There is no ind