Error in Reciver CC.

Hi ,
Iam doing File-file where i am apending Reciving file.
Example, if i have X101 file in Reciver and if i send X101and X102 file from sender,
X101 form reciver should be apended with X101 from sender and X101 should be created.
iam getting following error in reciver CC
Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 451 X102MT940.txt: Append/Restart not permitted, try again
Please help

HI
this is an ftp error
check this link
http://www.smartftp.com/support/kb/append-restart-not-permitted-try-again-f2579.html
regards
krishna

Similar Messages

Error when reciving mail with alias

Hy,
In my SAP system I am able to send and recive emails already. But in some cases the incoming mail is refused.
If the mail is sent with <> the mail reaches SAP, if not it doesn't get into SAP. If I send a mail via Outlook to one SAP adress it gets into SAP. If the mail sent by Outlook uses a alias it is refused by the host.
For example. (consider the # as a @ in the example. The forum don't allow to publish emails)
case 1)
mail to user#domain.com => results in connection dropped by remote host
rcpt to:user#trm.sap.pt
501 Syntax error
case 2)
mail to u201CAliasu201D <user#domain.com> => results in connection dropped by remote host
rcpt to:"user"<user#trm.sap.pt>
501 Syntax error
case 3)
mail to <user#domain.com> => OK
rcpt to:<user#domain.com>
250 Ok
I need to receive mails using the alias. Is there a way ?
TIA

Wrong forum try this forum:
http://discussions.apple.com/forum.jspa?forumID=753

Error: 0x800f0826 recived when installing SP1 of windows server 2008 R2

Tried to install the Windows server 2008 R2 SP1 but failed with the error code 0x800f0826.
The update install fine and when reboots it says "Installation was not successful" Error 0x800f0826.
I already follow steps as mentioned in this http://support.microsoft.com/kb/2505743 , but still no success.
plz. advice
SALMAN

Below are the CheckSUR.persist logs.
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-01 23:21
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 868
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-04 11:26
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 557
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-04 11:53
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 271
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-04 12:47
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-06-04 12:51
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 132
No errors detected
SALMAN

Red Error at reciver agreement

Hi Techies ,
Iam trying out a scenario for RFC to JDBC.
While Iam testing my configuratiuon in integration directory ( configuration).
Among 4 steps 3 steps are ok,
Iam having an error at Receiver Agreement, as mentioned below
No receiver agreement found for sender -DEVCLNT234 to receiver -bs_rfc_2_jdbc_reciver,urn:sap-com:document:sap:rfc:functions.ZTEST_PI_ZHRT002
Thanks in advance,
Regards,
Kiran

Hi Kiran,
This is a very common error. Pls check if you have created the receiver agreement for the correct sender and receiver.
While creating the Rx agreement, enter the correct sender system as DEVCLNT234 (as per your post) and check if you have selected the correct Receiver system (comm component) and correct receiver interface for the agreement. Also check if the sender comm channel is present and activated properly. This should resolve the issue.
If the error still persists let me know.
Regards,
Souvik

PM Order settlemet error with recive account

Hi
When im going to settle the PM Order to AUC ( Asset under construction ) it gives following error pls advice how to solve this issue.
Your quick response highly appreciated!!
Regards
Kesh

hi madhu..
whenever you raise any issue pl give details otherwise it is very difficult to identify the problem.. I think in your case in PM order there is problem in settlement rule because during settlement of order one cost object is required where cost to be settled, ie a receiver cost object. pl check.
kkumar

Error while pinging Web service in SUP.

Hi all,
I am trying to consume a Web Service through SUP.
I have taken a sample Web service [http://www.webservicex.net/ConvertTemperature.asmx?WSDL] .
But when I trying to establish a connection from sybase Wrokspace and ping the web service It is giving me an error.
I have checked if the web service URL and it is working fine.
The error I recived while pinging is as follows
com.sybase.sup.tooling.xml.XmlException: java.net.ConnectException: Connection timed out: connect
     at com.sybase.sup.tooling.wsdl.WsdlParser.parseURL(WsdlParser.java:573)
     at com.sybase.sup.tooling.wsdl.WsdlParser.parse(WsdlParser.java:68)
     at com.sybase.uep.tooling.eis.WsEISOperationBuilder.<init>(WsEISOperationBuilder.java:91)
     at com.sybase.uep.tooling.eis.WsEISOperationBuilder.<init>(WsEISOperationBuilder.java:66)
     at com.sybase.uep.datasources.ws.views.WSConnection.initialize(WSConnection.java:154)
     at com.sybase.uep.datasources.ws.views.WSConnection.<init>(WSConnection.java:38)
     at com.sybase.uep.datasources.ws.views.WSConnectionFactory.createConnection(WSConnectionFactory.java:28)
     at org.eclipse.datatools.connectivity.internal.ConnectionFactoryProvider.createConnection(Unknown Source)
     at org.eclipse.datatools.connectivity.internal.ConnectionProfile.createConnection(Unknown Source)
     at org.eclipse.datatools.connectivity.ui.PingJob.createTestConnection(Unknown Source)
     at org.eclipse.datatools.connectivity.ui.PingJob.run(Unknown Source)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Caused by: java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:525)
     at java.net.Socket.connect(Socket.java:475)
     at sun.net.NetworkClient.doConnect(NetworkClient.java:163)
     at sun.net.www.http.HttpClient.openServer(HttpClient.java:394)
     at sun.net.www.http.HttpClient.openServer(HttpClient.java:529)
     at sun.net.www.http.HttpClient.<init>(HttpClient.java:233)
     at sun.net.www.http.HttpClient.New(HttpClient.java:306)
     at sun.net.www.http.HttpClient.New(HttpClient.java:323)
     at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:860)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:801)
     at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:726)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1049)
     at com.sybase.sup.tooling.wsdl.WsdlParser.parseURL(WsdlParser.java:562)
     ... 11 more
Please let me know what the problem might be.
Thanks,
Krutheeka.

Hi,
while you setup the webservice you can test the service and get the preview of the resultset. Did that work fine? If that works fine - check if you can simply copy and paste the webservice URL into a browser on the running PC. If you do not get a result in the browser, it is the landscape - if you get a result in your browser but not in the app it is the app.
Well, could you try that step first?
Regards,
oliver

Error while calling sql loader from shell script.

In the table DBMS_SCHEDULER_JOB_RUN_DETAILS im getting the error as ""SQL*Loader-128: unable to begin a session ORA-01017: invalid username/password; logon denied""....do we need previliges for creating session of the db user????.....or wht other settings we require to do.....if the username and password used is right.

user1122577 wrote:
SQL*Loader-128: unable to begin a session ORA-01017: invalid username/password; logon deniedI don't know, but somehow the error you recived looks like ORA-01017 : )
[oracle@dell ~]$ sqlplus ring/ring
SQL*Plus: Release 10.2.0.4.0 - Production on Thu Jul 22 11:50:58 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, Data Mining and Real Application Testing options
[oracle@dell ~]$
[oracle@dell ~]$
[oracle@dell ~]$ sqlldr ring/ring
control = i don't have it
SQL*Loader: Release 10.2.0.4.0 - Production on Thu Jul 22 11:51:08 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL*Loader-500: Unable to open file (i don't have it.ctl)
SQL*Loader-553: file not found
SQL*Loader-509: System error: No such file or directory
[oracle@dell ~]$
[oracle@dell ~]$
[oracle@dell ~]$ sqlldr ring/wrongpassword
control = i don't have it again
SQL*Loader: Release 10.2.0.4.0 - Production on Thu Jul 22 11:51:38 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL*Loader-128: unable to begin a session
ORA-01017: invalid username/password; logon denied
[oracle@dell ~]$

Ora-472 error

I have a database created in oracle 8i personal edition
when i started my database it gets mounted and opened successfully but after opening the following error is recived in my alert log
'instance terminated due to error -472'
for what reason this error occurs the same error occurs in
the following background trace files
ckpt,dbwr,lgwr
can anyone help out of this.......

Bye! Please drop in again sometime!
This is a duplicate thread. See instance terminated due to error-472 for more details and resolution (perhaps, none at this time of posting).
Cheers, APC

Problem importing to Oracle XE 10.2.0.1.0

Hello people...
I have a Personal Oracle 9i ver. 9.2.0.1.0 in one machine and an Oracle XE ver. 10.2.0.1.0 in the other.
I am using the exp utility of Oracle 9i with command line exp userid=user/pass owner=user file=file1.dmp
and get the following output...
Connected to: Personal Oracle9i Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export done in EL8ISO8859P7 character set and AL16UTF16 NCHAR character set
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user USER
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user USER
About to export USER's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export USER's tables via Conventional Path ...
. . exporting table TABLE1 104789 rows exported
. . exporting table TABLE2 961 rows exported
. . exporting table TABLE3 0 rows exported
. . exporting table TABLE4 133 rows exported
. . exporting table TABLE5 7 rows exported
. . exporting table TABLE6 879 rows exported
. . exporting table TABLE7 3 rows exported
. . exporting table TABLE8 11 rows exported
. . exporting table PS_TXN 5 rows exported
. . exporting table TABLE9 1647 rows exported
. . exporting table TABLE10 0 rows exported
. . exporting table TABLE11 77 rows exported
. exporting synonyms
. exporting views
. exporting stored procedures
. exporting operators
. exporting referential integrity constraints
. exporting triggers
. exporting indextypes
. exporting bitmap, functional and extensible indexes
. exporting posttables actions
. exporting materialized views
. exporting snapshot logs
. exporting job queues
. exporting refresh groups and children
. exporting dimensions
. exporting post-schema procedural objects and actions
. exporting statistics
Export terminated successfully without warnings.
Everything seems ok so I go to Oracle XE, run after installation the catalog.sql script to enable import and i run imp using the following syntax:
imp user/pass full=y file=file1.dmp
and i get the following output:
Export file created by EXPORT:V09.02.00 via conventional path
import done in EL8ISO8859P7 character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
and when it starts to import it brings up a message for every VARCHAR2 field i have in a table
IMP-00019: Row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column USER.TABLE.FIELD (actual: 6, maximum: 4)
In Oracle 9i the field is VARCHAR2(4) but for some reason the IMP utility in Oracle XE reads it as VARCHAR2(6)... Anyway I can fix that?
PS. The user in Oracle XE has all the rights enabled...
Thanx for your time and effords,
Nikos
Edited by: Nikolas_S on 10 Αυγ 2009 5:34 πμ

Nikolas_S wrote:
Hello people...hi Nik,
Export file created by EXPORT:V09.02.00 via conventional path
import done in EL8ISO8859P7 character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)the errors you recived and the above info suggests that you are going through very common situation which usually manifests in this way when importing
data which originated from the database that have single byte characer set and is trying to be imported in the database that has multi-byte character set.
There are several general suggestions for resolving this, currently i can think of the one that is saying to resize a column to a higher value for the table which is causing import to fail.
There are several notes about this at metalink and some good to know informations at [tahiti.oracle.com|http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch11charsetmig.htm#i1005993]
Thanx for your time and effords,
Nikoscheers and good luck

Idoc partner type LI to File Scenario.

Hello Experts .
I have the following scenario.
IDOC partner type LI to xml (file).
So we are not atlking about logical system here and we may have to use parties.
But I am not sure as to how to go about this approach.
For now we have Idoc coming into XI but failing after that .(Outbinding) error in reciver agreement (not to be confused with a cache issue .).
But I understand it is because of the parties not defined properly.
So I have defined a party and assigned my ECC system to the same.File was basically a service.Do I need to define another party for it or several other identifier
Tried to follow How Tou2026
Sample IDoc-XI
Scenarios document but it is to confusing.
Kindly help

Thanks for your reply.
Well I have already tried this approach.
That is
Created a party :Sender_party.
Identifiers :
<sapid><client>   :*ALE#LI* :<venderno>   actually ALE#LI #LF "otherwise I end up with party service not found.
Receiver determination:
sender party
<BS/service> i.e. <sapid><client>     to mail_service (for testing to see if I recieve a payload)
<interface>
<urn>
Interafce determination
sender party
<BS/service> i.e. <sapid><client>     amd   <interface> interface mapping
<urn>
Reciever agreement.
mail_service : reciever mail adapter.
Error recieved.

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>-DMGCLNT400</SAP:P1>
<SAP:P2>Sender_Party-,urn:sap-com:document:sap:idoc:messages.Z_DELL_PO.ORDERS05.Z_DELL_POX</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver agreement found for sender -DMGCLNT400 to receiver Sender_Party-,urn:sap-com:document:sap:idoc:messages.Z_DELL_PO.ORDERS05.Z_DELL_POX</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Kindly note nothing is wrong with cache .
It is strange DMGCLNT400 is already assigned to the party . .

ITunes wont install PLEASE help me !

http://gyazo.com/523328c432ab8aad67b47242d88280fb this is the error i recive when trying to install itunes i have tried to disable my firewall on my internet security to install it but that doesnt work can anyone please help

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Seeburger XI adapter is not able to connect

Hi,
I have configured seeburger adapter (STPF) on XI 3.0 SP19 as per the seeburger installation document,
but when we are trying to send the data to a file server using SFTP, we are getting below error in
reciver communication channel, please help me
"Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: >> Description: putFile: Could not connect to remote host; Reason: com.maverick.ssh.SshException>> Details: putFile: Could not connect to remote host; Reason: com.maverick.ssh.SshException>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true, >> Description: putFile: Could not connect to remote host; Reason: com.maverick.ssh.SshException>> Details: putFile: Could not connect to remote host; Reason: com.maverick.ssh.SshException>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATIO "
Thanking you in advance.
Sonali

Hi,
Thanks for the reply,
from this http://<host>:<port_number>/sap/monitoring/ComponentInfo
I can make out the patch level as
SAP_XIAF 3.0 SP19 (1000.3.0.19.5.20070125110330)

Seeburger SFTP is not able connect to remote host

Hi,
I have configured seeburger adapter (STPF) on XI 3.0 SP19 as per the seeburger installation document,
but when we are trying to send the data to a file server using SFTP, we are getting below error in
reciver communication channel, please help me
"Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: >> Description: putFile: Could not connect to remote host; Reason: com.maverick.ssh.SshException>> Details: putFile: Could not connect to remote host; Reason: com.maverick.ssh.SshException>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true, >> Description: putFile: Could not connect to remote host; Reason: com.maverick.ssh.SshException>> Details: putFile: Could not connect to remote host; Reason: com.maverick.ssh.SshException>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATIO "
Thanking you in advance.
Sonali

Hi,
In similar condition , we also getting below errors:
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception:
com.sap.aii.af.ra.cci.XIDeliveryException: >> Description: putFile: Could not connect
to remote host; Reason: SFTP client was not able to connect: com.seeburger.sftp.exception.
ConfigurationException: Could not initialize SSH transport layer, reason : Connection timed out:
could be due to invalid address>> Details: putFile: Could not connect to remote host;
Reason: SFTP client was not able to connect: com.seeburger.sftp.exception.ConfigurationException:
Could not initialize SSH transport layer, reason : Connection timed out:could be due to invalid
address>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>
Retryable: false>>Fatal: false, >> Description: putFile: Could not connect to remote host;
Reason: SFTP client was not able to connect: com.seeburger.sftp.exception.ConfigurationException:
Could not initialize SSH transport layer, reason : Connection timed out:could be due to invalid
address>> Details: putFile: Could not connect to remote host; Reason: SFTP client was not able
to connect: com.seeburger.sftp.exception.ConfigurationException: Could not initialize SSH
transport layer, reason : Connection timed out:could be due to invalid address>>SendingStatus:
NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: false>>Fatal: false
Can you share , how you have resolved the errors?
You mentioned to change the owner to seeburger , please give details , where to do this.?
Thanks,
Anit

Idoc to File: Problem with the Idoc

Hi All,
I am triggring the Idoc from WE19, I am using an Business Service in the configurations but the tiggred Idoc is going into a business system every time I am sending the Idoc. In SXMB_MONI its showing an error no reciver can be determined for that Business System.
I am not able to understand whats going on behind and I have also tried using the business system with the same logical system I have created on R/3 but still the same error presists.
Any clues please let me know
Thanks and Regards,
Srikanth

Hi Ashish,
This is the error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
Srikanth

IDOC TO JDBC Erroe Handling

Hi,
All
we have to send ZIDOC To ORACLE system.
SAP->XI->JDBC(Asy)scenario.
Here how we can handle if it is
1. Network failure(System Errors)
2. Business Errors
There is no BPM
we decided:
IDOC data will insert into ORACLE sys uing value mapping (which is having values in IDOC and ORACLE)
my dought is if any failure in Value mappings than it will to intimate to SENDER and reciver using ALERT or MAIL.
Is this right approach ? if yes,
How can we send alert or mail? is there any documents is there?
thnx in advance
regards
kumar

Hi Kumar,
Errors like (e.g. mapping error, no reciver) are raised from the integration server.To do the same,in the runtime workbench you define the receiver of such an error in the alert configuration.
Please look at the information provided below in doing the same and see if it helps you.......
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also just check if this batch program (RSALERTPROC) is running or not.
The links below on Alert Management (ALM) will be of good help to you:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm">Forwarding Alerts to Alert Management (ALM)</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm">Alert Management</a>
<a href="/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step: Alerts - Step by step</a>
<a href="/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide: Alerts - Troubleshooting guide</a>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
Meanwhile look at these forum threads also:
Alerts not getting triggered from Adapter Framework
Alert Configs...
Also go through these...
1) http://help.sap.com
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Alert Configuration
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
2) Michal's blog: XI FAQ
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
XI: Alerts - Troubleshooting guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
To send an EMAIL, assign an EMAIL ID to the corresponding user in the transaction SU01 and then set up SCOT and you can send emails when the ALERT is triggered..
Once you have configure Alerts, you will get the Alerts into ALERT INBOX in RWB of the user. To also get the email, the following needs to be done,
1. In SU01 -- Assign the Email ID for the Recipient of the ALERT.
2. In , RWB>ALERT INBOX> PERSONALIZATION--> Time Independent Delivery and Email are selected.
3. Finally, SCOT needs to be set up to send Emails. Check this for the same. You can ask your BASIS team to do this step.
http://help.sap.com/saphelp_nw04/helpdata/en/23/1edf098ea211d2b47300609419ed29/frameset.htm
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
I hope this helps....
Regards,
Abhy

Error in Reciver CC.

Similar Messages

Maybe you are looking for