Idoc to File: Problem with the Idoc

Hi All,
I am triggring the Idoc from WE19, I am using an Business Service in the configurations but the tiggred Idoc is going into a business system every time I am sending the Idoc. In SXMB_MONI its showing an error no reciver can be determined for that Business System.
I am not able to understand whats going on behind and I have also tried using the business system with the same logical system I have created on R/3 but still the same error presists.
Any clues please let me know
Thanks and Regards,
Srikanth

Hi Ashish,
This is the error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
Srikanth

Similar Messages

Idoc to file problem with DynamicConfiguration

HI SAP Guru's
I have a iDoc to File scenario and the output file requirement is bit tricky.
output file should be xx_Region_iDoc Number_YYYYMMDDHHMMSS
I been through couple of blogs but non of them mentioned about the iDoc all of them showed the about the FileName in FileAdapter.
I believe it is only possibly via Dynamic configuration.
I need to extract E1EDKA1/LAND1, DOCNUM from Source IDoc Structure and then concat it with Date and generate the output file name.
I cannot even get the iDoc Number i.e. DOCNUM via Dynamic Configuration.
I was trying this method but it didn't work.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/IDoc","DOCNUM");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Can somebody please let me know how to achieve this and how?

Hi Rodrigo,
I have done the UDF with 3 inputs and mapped it with header of Target side and now would like to know about the setting in File Adapter.
1. Could tell me what do I need to write in "File Name Scheme" , I am using *.xml , is it right?
2. I also check the Use Adapter Specific Message Attributes,
Fail if Adapter-Specific Message Attributes Missing
FileName
Could you please tell me is there anything else I need to do because I have been through couple of blogs and all of them mentioned about File but not about the IDoc.
DynamicConfigurationKey key = DynamicConfigurationKey.create(u201Chttp://sap.com/xi/XI/System/Fileu201D,u201CFileNameu201D);
Except you who mentioned this
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/IDoc",fileName);
I am bit confused about the FileName because there is no FileName in IDoc;
I found these information in IDoc Dynamic Configuration
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="SNDPOR">SAPDGE</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="SNDPRN">DGE008</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="SNDPRT">LS</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="RCVPOR">A000000012</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="RCVPRN">CITIPHMX</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="RCVPRT">B</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="MESTYP">PAYEXT</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="IDOCTYP">PEXR2002</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="CIMTYP">ZPEXR2002</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/Message/30" name="CALLER_CODEPAGE">4102</SAP:Record>
</SAP:DynamicConfiguration>
Please comment.

IDOC to JDBC, problem with the multiple line items structure and mapping

Hi,
I have a scenario where the ORDERS data need to update the SQL table. for the idoc which consists one line item its ok but for multiple line item its just updating one line item. In the destination side we have only one table for purchase order which consists of lineitem as a field.(no different tables for Header data and Line item data)
Can anyone suggest me how to create a structure for target side and how to map them.
Regards,
CJ

Hi Rajan,
The table structure is
[PO_DATE]
      ,[VENDOR_NO]      ,[PAYMENT_TERM]      ,[MATERIAL_CODE]      ,ORDERED_QTY]      ,RECEIVED_QTY]
      ,[UOM]       ,[RATE]       ,[CURRENCY]       ,[PO_EXCRATE]       ,[TAX_CODE]       ,[BASE_VALUE]       ,[TAX_VALUE]
      ,[TOTAL_VALUE]       ,[ADVANCE_PAYAMT]       ,[TOTAL_QTY]        ,[SNO]       ,[POLINEITEM]
Datatype structure:
PO_XI_MT_ORDERS05 1-1
STATEMENT   1-UNBOUN
TABLENAME 1-1
    ACTION   optional
    TABLE    1-1
    ACCESS 1-1
       PO_NO   0-1
       PO_DATE 0-1
Correct me if im wrong.
Regards,
CJ
Edited by: kuncjy on May 5, 2011 11:32 AM

Tif file problem with the wrong file showing up

In W7 64-bit PPro CS 5.01 I have a problem that shows up sometimes on SD NTSC projects.
It happens when I have a number of Tif files that are used with Luma-key as graphic overlays on video clips, They are all made in Photoshop with 0-0-0 black backgrounds. They sometimes show up on the timeline as the wrong tif file. I've checked them and even reloaded them (from another computer) and it continues to happen. If I have ten files, the first few work fine, but suddenly all the rest I try to add all show up in the video as the previous tif file that was overlayed on the video clips. I've tired rebooting and to no avail.
Has anyone else had a problem like this?

Thanks All,
If 5.03 is just like 5.01 in behaviour with just some bug fixes I think I will.
But just a note: I tried 5.5 and I didn't like how it handled the red/green line render-issue. It was always all yellow and seemed slower than 5.01. So I backed it out and have been mostly happy since. It fits my workflow. The Mecury render business seems like a waste of the 800 bucks for the video graphics card I used too. I'm glad it wasn't just me noticing some little bugs in 5.01
One other thing 5.03 might fix too. Sometimes if I take a long break, and come back to work, the program seems to go to sleep. When I click on a few things some of the panels go all white. Would that be a bug too? At first I thouhgt it was the external HD I use fro each new project. Maybe not?

Problems with multiple idocs in one file ( Inbound file )

HI,
Thanks in Advance for your suggestions.. Highly appreciated.
We have problems with multiple IDocs in one file.
We are using XIB ( Amtrix ) as Middleware to receive the files.
Curretenly When the file contains one IDoc then there is no problem. IDoc is created and everything is ok.
If file contains two IDocs ( for example two messages ORDERS and DELVERY ) then it is creating two IDocs but both IDocs contains ORDERS plus DELIVERY segements information. That is the problem. Some how SAP unable to differentiate the IDocs in the file.. But it knows that how many idocs are there in the file..because it is creating exact number of idocs.
We are using TRFC port ... Do I need to change it to File port..
When we have more than one idoc do we need set any parameter in the file ...

Thanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that

Idoc to file problem.......... IDOC lost

i have a idoc to file problem,
the idoc is sent from R/3 to XI,
the problem is IDOC is sent from R/3,
it didnt reach to XI.....
i have checked.......we05 in R/3, it gives a status 3,
then i checked SM58 in R/3, it shows nothing,
when i check in idx5 in XI, theres no trace of that idoc....and no trace of the scenario run in SXMB_MONI
pls help, where can i trace the idoc.....
pls help

Hi sudeer,
Did You Check It In WE19.(Test Tool For Idoc Processing)
If Not Do The Following Steps:
Step1:
>> Give Your Existing Idoc Number.
Step 2:
>> Basic Type is Your Message type.
 Ex: MATMAS05 or CREMAS05.
Step 3:
>> In Your Existing MATMAS05 or CREMAS05 Structure say EDIDC,
>> You Should Fill Your Mapped Entries In Data Structure of EDIDC.
>> So that Those Fields Gets Framed as Segments.
Step 4:
>> After Doing It goto Menu Bar and Click Idoc And Goto Edit Control Record.
Step 5:
>> Now You Give Your Sender And Receiver Port Number Along With Your
 Logical System And Message Type again its Your MATMAS05 or
 CREMAS05 .
Step 6:
>> After Doing It Click Standard Outbound Processing.
Step 7:
>> It Will Say what Happened To your Idoc.
Step 8:
>> It Is For Sure That if This Processing Fails It Wont Go To XI..
Regards,
Dhayanandh .S
Dont forget To Provide Points If Found Helpful...
Message was edited by:
 DHAYANANDH SIVASANKARAN

IDoc-to-File scenario with external Partner ... PCK necessary?

Hi all,
I have a question concerning to a IDoc-to-File Scenario with an external Partner. Here is a short Description of the Scenario:
The SAP ERP System creates an IDoc which should be send to the SAP Integration Server. The Integration Server respectively the IDoc-Adapter transform the IDoc in IDoc-XML. The Integration Server executes a Mapping and so on. In the final step the Integration Server should send the XML-File to a FTP Server in New York (external Partner) with the File/FTP-Adapter.
Have I to install the Partner Connectivity Kit at a Server in New York or is it working without the PCK? Which are my possibilities?
Thanks for your help
with kind regards
Christopher

Hello,
If the FTP server has connectivity to XI and if the
port is open XI can directly do the FTP using File
Adapter.
Thanks,
Himadri
Hi,
thanks for your quick answer.
What means "connectivity to XI"? Our SAP-Environment is in Germany and the FTP-Server is in New York. Is it enough to open the port in the firewall?
Thanks for your answer
Christopher Kühn

IDOC to FILE scenario With Screen shots

CAN YOU PLEASE SEND US THE DETAILS OF IDOC to FILE scenario With Screen shots and do the needful for me

Hi Surya,
I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Also have a look at these forum threads...
IDOC TO FILE SCENARIO
idoc to file scenario
I hope this helps.
Regards,
Abhy Thomas

Problem with Delivery IDOC staus 51

Hi all,
I have problem with Delivery IDOC.
An IDOC is sent from the logistics provider with reference to a manually created delivery, which creates another IDOC & another partial delivery.
The second IDOC created then confirms the partial delivery created by the first IDOC.
When IDOC try to confirm this delivery, it goes to status 51 with error " Delivery does not exist".
In some case IDOC was correctly processed & confirmed the delivery.
In some cases it went wrong.
Any ideas regarding this?

Hi Suneel,
It seems there is timing issue between the first IDoc and second IDoc.
When the first IDoc has not yet commit to DB then the second IDoc tries to process with reference to the first IDoc.
Is there any that can distinguish between 1st and 2nd IDocs?
In other word, can you post the second IDoc within minutes delay?
Just my two cents.
Regards,
Ferry Lianto

Problems with sending IDOC in tRFC.

Hi All,
I am sending IDOC to websphere from SAP.
Problem is very weird. All the IDOCs have status 03, but some of them never reach webshpere.
I checked SM58 and there are some tRFC entries for the same.
Following is the error there:
Check SAP Connector log. Error in BO Handler.
I think problem is after the data has been sent to ALE layer.
Can anyone suggest what can be the issue? And how can this be resolved.
Regards
Anuj

Hi Anuj,
As it seems like from the error message there is some problem with the way BO handler is responding to request BOs .
The base class to initialize the connector has been set properly though.
Check the log in SM21 on this and it might give you the detailed information.
Also check if you are passing the large objects, which might require some additional config.
Hope these pointers help in solving the issue.
Cheerio,
Disha

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should lo

I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should look and B is what happens after I have I opened several tabs. I can get it back to normal if I click on VIEW than click on customize. When the customize window appears FireFox returns to its normal state. I than click on the done box and go back to what I have been doing. I tried resetting FireFox back to default settings, but that did not correct the problem.
This began happening about a month ago. Is there a way I can fix this problem? Thanks for your help.I don't know how to attach my 2 attachments that shows the problem I am having.
[email address removed to protect your privacy and security]
<! [email protected] -->

I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598

Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
error, Location: 2'
When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
were illegible, but no other weirdness was observed.
I have microsoft 2008 installed on my Mac OS X version 10.6.8.
I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

Hi,
This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
Please use the "Fix it" tool in the following KB article to resolve the problem. See:
http://support.microsoft.com/kb/2528942
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Problem with the EFI system partition's file system.

I installed latest yosemite 10.10.2 update - did a verify disk on “WDC WD1001FALS-403AA0 Media” (internal HD on my iMac 21.5-inch, Mid 2011) and got
Problems were found with the partition map which might prevent booting
Error: The partition map needs to be repaired because there’s a problem with the EFI system partition’s file system.
However a verify disk on the volume partition gets a clean bill of health!
I haven't done a 'repair disk' yet. Thought I'd check if anybody else has same message first.
Cheers

I had issues where my MacPro 8-core would not boot after the 10.7.4 upgrade, but my MacBook Air 13" 2011 upgrade worked just fine.
I had to restore my MacPro HD from my TimeMachine back up. Apparently, the Softraid raid drivers that I use on my MacPro are not compatible yet with 10.7.4. See here for more info:
http://macperformanceguide.com/blog/2012/20120511_1-MacOSX-SoftRAID.html
I contacted Softraid and they are already aware of the issues and are working with Apple for a fix.
Cheers.
Bud

Idoc to File: Problem with the Idoc

Similar Messages

Maybe you are looking for