Error in Reordering Colums of a table

I have extended one VO and added its column to a existing table layot of OAF Page in iProcurement. As such its OK. But when i try to reorder the columns, and try to bring my new column in the second position it gives the following error.
Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND. Tokens: VONAME = xxdevReqDetailsVO; APPLICATION_MODULE = oracle.apps.icx.por.reqmgmt.server.ReqMgmtAM
But if the column is placed at 4th or subsequent position of the table then it works fine.

FND_VIEWOBJECT_NOT_FOUND indicates that the VO you have referred to is not available at JAVA_TOP.
If you are extending the VO, are you taking care to substitute it too? In that case if you add a new column through personalization you still need to mention the name of the existing VO and not the newly created VO (even though the new column may not reside in the existing VO)
Hope that helps
Thanks
Sumit

Similar Messages

Error while selecting date from external table

Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2        SE_CUST_ID NUMBER(38),
3        SE_TRAN_AMT_LCY FLOAT(126),
4        SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6    TYPE ORACLE_LOADER
7    DEFAULT DIRECTORY ext_tables
8    ACCESS PARAMETERS (
9      RECORDS DELIMITED BY NEWLINE
10      FIELDS TERMINATED BY ','
11      MISSING FIELD VALUES ARE NULL
12      (
13        country_code      CHAR(5),
14        country_name      CHAR(50),
15        country_language CHAR(50)
16      )
17    )
18    LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19

It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell --

PRCC Error - Currency HUF is not in table TCURR

Hi,
while running PRCC to update credit card charges i am receiving an error "Currency HUF is not in table TCURR". But if i check TCURR its updated. Is there any config in Travel which need to be done for this.
Regards,
Hario

hi,
Please check the "exchange rate type" M, E, etc, if that´s the same using in TM in configuration
BR
Monica Ordaz

Error in code generation for deleting table BUT000_TD

Hi,
Did anyone encounter this error while working on EEWB ?
I created the project extension via EEWB and completed the wizard setting with the package (dev. class) value as $temp as I wanted to test it locally.
One of the errors, that I got is:
Error in code generation for deleting table BUT000_TD
    Message no. DA464
Diagnosis
    This error message indicates that internal inconsistencies exist.
Procedure
    Please consult SAP.

Hi,
As I mentioned in my previous post kindly check the consistency of the structure BUT000_TD.
Regards,
Sudheer.

Error while deploy mapping ora-06550 table or view does not exist

Hi everyone,
i have a target source 'U_BCK' that cointains some Oracle table.
I have also created a target schema 'BCK_OWNER' where i create some dimensions and cubes with mappings.
My mappings connect some table from U_BCK with dimension or cube from BCK_OWNER.
My repository owner is called 'rep_owner' and i used this user to create every metadata.
Now i'm trying to deploy, and i don't have any problem until deploying mappings. When i try to deploy mappings i get some errors like ora-06550,ora-00942 table or view does not exist and statement ignored.
Please help me and sorry for my english...
Thanks,
Alex.

The mapping, that drives the data from one table to another is deployed to the database as a PL/SQL package. When deploying your mapping fails, it most often means that the resulting PL/SQL package doesn't compile in the database.
Using Oracle SQL Developer (or Toad, SQL Navigator or any other tool) connect to the schema on the database where you have deployed the mapping. Open the pl/sql package and compile it. That should show you the place where the compilation fails, and give you an idea as to what table it can not find. Otherwise, in SQLPLUS, you can simply give the following command:
ALTER PACKAGE THE_PACKAGE_NAME_GOES_HERE compile body;
show errors;
As the database user who owns the source tables, make sure to issue a GRANT command for each of the source tables, granting SELECT access to the database user who owns the mapping:
grant select on TABLENAME to TARGETSCHEMA.
hope this helps
Borkur

ORA-00600: internal error code while inserting data in table

hi gems..
i am getting the below error while inserting data in a table...
*ORA-00600: internal error code, arguments: [kqd-objerror$ ] , , [0], [98], [BIN$sm1O+fYhF1jgRAAhKNYyZA==$0], [], [], [], [], [], [], []*
i can select the table absolutely but cant insert datas(but this is the schema owner and so datas should get inserted)
i have checked the alert.log...the entries in last few lines are like this:
<msg time='2011-11-25T03:08:55.763+05:30' org_id='oracle' comp_id='clients'
type='UNKNOWN' level='16' host_id='ICS167DOR'
host_addr='10.184.134.139'>
<txt>Directory does not exist for read/write [oracle/ora11g/app/ora11g/product/11.2.0/dbhome_1/log] [oracle/ora11g/app/ora11g/product/11.2.0/dbhome_1/log/diag/clients]
</txt>
</msg>
please help...thanks in advance
Edited by: user12780416 on Nov 25, 2011 3:29 AM

hi...
finally i got the solution...i know that this problem may occur due to some other reasons also for different users...but the problem which caused the developers facing the error in this case is below:
they faced the error while importing the dumps in the server. at the same time the application developers told that they can select the tables but cannot insert any datas.
after listenning to this, i assumed that this may be a space problem with the system tablespace as it is responsible for storing the data dictionary.
i asked for the free spaces for the system tablespace and got the reason. It has only 0.2% left.
i told them to issue the resize command for the system01.dbf datafile(allocated 2GB more) and the problem got resolved.
Hope this helps..thanks

Error while deriving the currency from table

i am getting the below error while simulating the payroll for india.
Error while deriving the currency from table T001P & Error during Initialization of payroll.
i am SAP HCM Trainee.. practicing at home.

Pls check the currency in table T500C.
You can use TCode OE00 for table maintenance T500C.
Also check whether currency is there in table V_CURC and T510.
Hope this will help.
Regards
Ghouse

Error while filling the set up table for 2LIS_11_VAITM

Dear Experts,
i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
The error was "Company code for sales org 9000 does not exist (document 1326)".
when i checked the document in the Header table VBAK,company code was blank for the document .
Company code was there in the selections for the setup table.
The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
Could you please help me out to over come the problem.
Regards,
Sunil...

in the selection screen for filling the setup table, there is a parameter No. tolerated faulty documents
you'll have to enter at least '1' here in your case
it might be that there are other erronuous records, in that case it will crash again, and you'll have to increase the value for this parameter
(under "normal" circumstances, all documents in the source should be correct... but apparently it's possible to circumvent this)

Error while loading to active data table in DSO

Hi,
please help me in resolving the issue with active data table . when i am activating the new data table the job gets cancelled with message as 'Error when assigning SID: Action VAL_SID_CONVERT table OCALMONTH'.
Thanks and Regards,
Prasad.

Hi,
In the displaying error message tab of ODS activation, you will get error message and invalid value for the 0CALMONTH will be displayed. Search the NEW TABLE of ODS with the same value, identify the error records.
If you have PSA in the flow, delete (w/o making the status RED), correct data in PSA and reconstruct the data.
If you don't have PSA, you have to delete by making red, reload through PSA correcting the erroneous data in PSA.
Regards
Chandu

Error while deriving the currency from table T001P.

Hi Friends,
I am trying to run payroll for NZ using schema NZ00 but i am getting an error stating "Error while deriving the currency from table T001P. Error during initialization of Payroll"
I have checked V_T001P, V_T001 and have deleted the personnel area and subarea and again created it but still i am unable to solve this problem.
Could you please help me as to where this error can be corrected.
Thanks,
Manj

About the incidence, the problem might be related to the links between
personnel area, company code and currency set up (table T001P, T500P and
T001).
Please check the following points:
1- Have you assigned the Personnel area to the Company code under SPRO -
IMG -> Enterprise Structure -> Assignment -> Human Resource Management
-> Assignment of Personnel Area to Company Code.
2- SPRO -> Personnel Management -> Personnel Admin -> Basic Settings ->
Determine Currencies (Public Sector Currency Need to be maintained along
with the other node).
3- SPRO- Personnel Management -> Personnel Admin -> Payroll Data ->
Basic Pay -> Define Hourly Rates for several decimal places. (Please
maintain all the nodes).
4- Maintaining the table t500c through transaction code OE00.
Regards
Ramana

Syntax error when creating a user-defined table type in SQL Server 2012

Why am I getting a syntax error when creating a user-defined table type in SQL Server 2014?
CREATE TYPE ReportsTableType AS TABLE
( reportId INT
, questionId INT
, questionOrder INT );
Results:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'AS'.

Hope these posts could help,
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/37a45a9a-ed8c-4655-be93-f6e6d5ef44be/getting-incorrect-syntax-while-creating-a-table-type-in-sql-server-2008-r2?forum=transactsql
Regards, Dineshkumar,
Please Mark as Answer if my post answers your question and
Vote as Helpful if it helps you

Error While Viewing Data from MARA Table

Hi All,
After Importing SAP Tables, ex MARA and viewing Data Getting "Error Calling RFC function to get table data: <DATA_BUFFER_EXCEEDED "r . After decreasing or applying filters on fields , still not able to get data.
Able to extract data from T001 table.
Need to pull data in volumes right, so how to tackle this problem.
Thanks,
Ravindra

Hi Ravindra ,
You can check the OSS note - 1186277 for the resolution of this issue .
Note- 1186277 is a SAP knowledge article .
You can access it from here - [Note - 1186277|https://css.wdf.sap.corp/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3131383632373726]
Regards,
Lokesh

JPA - TroubleShooting - Error in Datatypes used in Creating Tables

h1. JPA - TroubleShooting - Error in Datatypes used in Creating Tables
h2. Error Description
The error appears when JPA is trying to automatically
generate tables from Entities. It uses types it shouldn't because they aren't
supported by the Database Engine. If you examine the createDDL.jdbc file you
are going to find not supported data types. You could run the statements that
are listed there directly to your Database Engine and find out that they don`t
run generating syntax errors like the error posted below.
h3. Query example (statement)
CREATE TABLE SEQUENCE (SEQ_NAME VARCHAR(50), SEQ_COUNT NUMBER(19))h3. PostgreSQL Error whent trying to execute the statment
CREATE TABLE SEQUENCE (SEQ_NAME VARCHAR(50),
SEQ_COUNT NUMBER(19))": org.postgresql.util.PSQLException: ERROR: syntax
error near "("
h3. MSSQL 2000 Error when trying to execute the statement:
[CREATE - 0 row(s), 0.578 secs] [Error Code: 2715, SQL State: HY000] [Microsoft][SQLServer 2000 Driver for
JDBC][SQLServer]Column or parameter #1: Cannot find data type NUMBER
h3. FireBird Error when trying to execute the statment
Dynamic SQL Error
SQL error code = -104
Token unknown - line 1, char 62
Statement: CREATE TABLE SEQUENCE (SEQ_NAME VARCHAR(50),
SEQ_COUNT NUMBER(19))
h2. TroubleShooting
Looks like it wants "NUMERIC", not "NUMBER".
[http://www.postgresql.org/docs/8.1/interactive/datatype.html#DATATYPE-NUMERIC]
I had this problem using Firebird. I found out it had to do
with the database jdbc driver. I tried using a different database engine, like
Microsoft SQL Server 2000 with the corresponding driver and it worked as it
should. I suspect the JDBC driver has to supply in some way the datatypes it
supports to JPA TopLink Library.
Edited by: juanemc2 on Apr 1, 2008 7:39 AM

In Hibernate you can supply the "dialect" to use for SQL generation. I assume TopLink to have a similar functionality.
This is not a generic JPA issue, but rather something with the specific implementation you're using.
Or rather it is a generic SQL issue, caused by different database engines using slightly (or not so slightly) different SQL syntax which causes problems when generating SQL automatically.

Error during Unicode Conversion at DDNTF table

Hello
We are doing a Unicode Conversion for our CRT systems. This system now
is a SAP CRM 7.0 SR1 ABAP.
We have performed preparatory steps (SPUMG, checks, updating R3load,
R3ldctl, R3szchk, dboralib, ...),
but when we start Import process we get an error in SAPSDIC package.
The error looks like:
*************************+
(RTF) ########## WARNING ###########
Without ORDER BY PRIMARY KEY the exported data may be unusable
for some databases
(EXP) INFO: table DDNTF will be exported with sorting
(RSCP) ERROR: 'DDNTF' in UMGCCTL: Guess has illegal value.
(RSCP) WARN: DDNTF: Missing in UMGSTAT,
ERROR in nametab conversion
conversion of nametab table 'DDNTF ':
rscpMCStartTab: rc = 128
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/CRT/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/CRT/SYS/exe/run/R3load: END OF LOG: 20091229193651
Any idea??
Thanks in advance
Regards

Yes I executed this Report using Menu Tool Bar.
The first execution gave me some errors regarding some tables existing at database level but not in DDIC. We ignored this errrors because those tables are not important.
But the last try, we decided solve this inconsistencies deleteting those tables at database level, repeting report RADUCNT (in this case no errors appeared) and repeting the export with the same error..
Now, we have seen in Tabscript STATUS of SPUMG there are some errors regarding DDNTF inconsistency found at table control. Reason 4. But this reason means that faillback codepage missing at table control for this table. But as far I know, I can't fill failbak field for this kind of table...
So know I'm reseting SPUMG, and reestarting again..
But I don't understand what is the problem
In a few minutes I will you inform about results
Meanwhile is anybody have any suggestion or idea... please let me know
Thanks!

In MIGO I have error."No Item Catagory exists Table T184L HID NORM V)

Hi
Stuck in MIGO , Po created with and while processing MIGO I am getting the following error."No Item Catagory exists Table T184L HID NORM V)
I am using Retail , maintained Item catagory group but still I am facing with this error ..

Resolved the issue with 0184

Error in Reordering Colums of a table

Similar Messages

Maybe you are looking for