Error in report getting "Invalid set of rows requested......."

Hi all,
I have search report in which, 5 multiselects are there and two select list are there.
some times when we choose the options and press 'GO' button
this kind of error is comming
"Invalid set of rows requested, the source data of the report has been modified."
But after going to another page and comming back it is working properly.
What might be the reason for it?? how to avoid it???
Please any suggestions are appreciated.
Thanks in advance
kavitha

Hi
Please anyone could give me suggestion to solve the problem...
First time, when i run the application. the first page is the search page and the report will by-default display.
i am displaying 25 records per page. and when i click the pagination next arrow mark, it is saying "No records found"
but when i click the GO button once again it is comming.
This happens only once that too, only for the 2nd page... when i press next arrow for the next pages (3rd page) it is working fine.
when i run the application in the beginning.(ie when i start to run the application for the first time)
thanks in advance
kavitha

Similar Messages

[ID 365563 daemon.error] can't get stderr port: Cannot assign requested add

Hello friends, i m getting the messages bellow in error logs, please suggest me what i have to do
" [ID 365563 daemon.error] can't get stderr port: Cannot assign requested add"

Hi Tom,
     Thanks, but at this point, I've rebooted, checked and double-checked more times than I'd care to count...:(
     Since I can see the NMEA strings when the GPS module is hooked-up to the USB port, I guess I'll assume there's some reason why the
     AMA0 UART has not been released, or that the GPS receives some different signals through the TTY that it's not seeing through the AMA0.
      As I mentioned, when I use 'cat /dev/ttyAMA0', it just hangs, like it's getting no data. I'll keep looking...
     Thanks for your help,
          Dave

Getting an error -unable to get stable set..i cant identify why??

MERGE INTO aaa_interim ai
USING (SELECT *
FROM aaa_staging
WHERE record_type = 3 or (record_type=2 and terminate_cause_id=1)) asi
ON (ai.vendor_record_id = asi.vendor_record_id) ---remove the field for session_id
WHEN MATCHED THEN
UPDATE
SET duration_seconds = asi.duration_seconds,
download_bytes = asi.download_bytes,
upload_bytes = asi.upload_bytes
WHEN NOT MATCHED THEN
INSERT (vendor_record_id ,
process_time_utc,
processed_flag,
vendor_record_creation_time,
vendor_session_id,
-- nas_ip_address,
nas_identifier,
nas_port,
user_id,
user_realm,
mac_address,
start_time_utc,
end_time_utc,-----will put null if its an interim record
duration_seconds,
utc_offset_seconds,
download_bytes,
upload_bytes,
terminate_cause_id, ---session_cont,
locationcategory,
locationid,
bsid,
-- msid,
-- MIN,
carrier_id,
pcf_id,
aaa_ip_orig,
aaa_ip_dest,
ispeak)
VALUES (asi.vendor_record_id,
asi.process_time_utc,
asi.processed_flag,
asi.vendor_record_creation_time,
asi.vendor_session_id,
--asi.nas_ip_address,
asi.nas_identifier,
asi.nas_port,
asi.user_id,
asi.user_realm,
asi.mac_address,
asi.start_time_utc,
asi.end_time_utc,
asi.duration_seconds, -------for a stop record and session_cont=1
asi.utc_offset_seconds,
asi.download_bytes,
asi.upload_bytes,
asi.terminate_cause_id,
asi.locationcategory,
asi.locationid,
asi.bsid,
-- asi.msid,
-- asi.MIN,
asi.carrier_id,
asi.pcf_id,
asi.aaa_ip_orig,
asi.aaa_ip_dest,
asi.ispeak);

i chechked it
the driving query is proper...
i am just supposed to replace where there is a matchin vendor record_id
..the problem is that it is not merging into the table where ever there is a matching vendor record_id
it is is inserting..strange????
when one record got inserted with a given vendor_reocrd_id
is is again inserting another record instead of merging.....
still wondering how?????

MSSQL Server 2012. Error accessing reporting website. Not Found The requested URL /ReportServer1 was not found on this server. Unable to uninstall MSSQL 2008

Hi all. I have recently installed MSSQL Server 2008, and was not able to access the URL when I clicked on it. It gave me a 404.
When I installed 2012, I tried the same thing and it also throws me a 404 error. How should I go about solving this? What are the log files that you may need to help me solve this?
At the same time, I have also tried to uninstall my 2008, but am always stuck at not being able to remove Client Connectivity Tools and some other components. Please let me know what log files you need and I will be happy to provide them. Thanks!
The following is the log for the uninstallation.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068052368
Exit facility code: 1212
Exit error code: 1648
Exit message: Failed: see details below
Start time: 2014-04-11 09:40:30
End time: 2014-04-11 09:41:37
Requested action: Uninstall
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: ADC-PC
Machine processor count: 8
OS version: Windows 7
OS service pack: Service Pack 1
OS region: Singapore
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Sql Server 2008 R2 Management Tools - Basic
Enterprise Edition 10.50.1617.0 No
Sql Server 2008 R2 Management Tools - Complete
Enterprise Edition 10.50.1617.0 No
Sql Server 2008 R2 Client Tools Connectivity
Enterprise Edition 10.50.1617.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation edition: EVAL
User Input Settings:
ACTION: Uninstall
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\ConfigurationFile.ini
ENU: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: CONN,SSMS,ADV_SSMS,CE_TOOLS,BROWSER,WRITER
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTANCEID: <empty>
INSTANCENAME: <empty>
PASSPHRASE: *****
QUIET: False
QUIETSIMPLE: False
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\ConfigurationFile.ini
Detailed results:
Feature: SQL Writer
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Browser
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: SQL Compact Edition Tools
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\SystemConfigurationCheck_Report.htm

Strange, but finally the procedure below did solve my problem.
# Go to Control Panel > Add or Remove Programs and look for '''Anti Phishing Domain Advisor'''.
# If you click on ''Click here for support information'' you'll see it is a Panda program.
# Uninstall '''Anti Phishing Domain Advisor''' program...
# This did solve my problem
See also [https://support.mozilla.com/en-US/questions/811399#answer-205531 Can't open mail. Get this message: 404 Not Found nginx/0.6.32]

Rsh[3088]: [ID 365563 daemon.error] can't get stderr port in /var/adm/mes..

Hi,
We are using Solaris 9 in our SF6900 cluster. On one of the node we are getting below continuous flow of messages. Please let me know what does these messages means and how to clear them.
root@l7n2> tail -f /var/adm/messages
Aug 8 09:09:34 l7n2 rsh[3071]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3075]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3077]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3078]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3082]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3084]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3085]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3086]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3087]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3088]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
^C
Thanks.

Hi Tom,
     Thanks, but at this point, I've rebooted, checked and double-checked more times than I'd care to count...:(
     Since I can see the NMEA strings when the GPS module is hooked-up to the USB port, I guess I'll assume there's some reason why the
     AMA0 UART has not been released, or that the GPS receives some different signals through the TTY that it's not seeing through the AMA0.
      As I mentioned, when I use 'cat /dev/ttyAMA0', it just hangs, like it's getting no data. I'll keep looking...
     Thanks for your help,
          Dave

Invalid path /AFDashboardPageView was requested

After upgrade my Business Object 3.1 SP0 to SP3 with Fix Pack 3.4 appear in the home of InfoView this error: HTTP Status 400 - Invalid path /AFDashboardPageView was requested.
I can not upgrade more (i´m in the top level), how can solve it?
Thanks in advance,
Regards,

Can you you please try the following?
1) Stop the tomcat
2) Go to <BOBJ installation path>\TOmcat55\webapps and remove the following directories:
- InfoViewApp
- InfoViewAppActions
3) Start the tomcat
Try again now to start the InfoView.
I asumme that you are using WIndows. The path for Unix is similar ( <bobj installation paht>\tomcat\webapps)
Do you have any integraiton Kit installed?
Regards,
Stratos

MERGE error : unable to get a stable set of rows in the source tables

Hi,
For an update, the following MERGE statement throws the error-unable to get a stable set of rows in the source tables:
MERGE INTO table2t INT
USING (SELECT DISTINCT NULL bdl_inst_id,.......
FROM table1 ftp
WHERE ftp.gld_business_date = g_business_date
AND ftp.underlying_instrument_id IS NOT NULL) ui
ON ( ( INT.inst_id = ui.inst_id
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.ric = ui.ric
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.isin = ui.isin
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.sedol = ui.sedol
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.cusip = ui.cusip
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
WHEN MATCHED THEN
UPDATE
SET INT.inst_id = ui.inst_id, INT.ric = ui.ric
WHEN NOT MATCHED THEN
INSERT (inst_key, ......)
VALUES (inst_key, ......);
To determine the existence of a record, first check if any match is found on the first key, if not then search for the second key and so on.
Now two records with differenct first key, i.e. inst_id, can have the same ric(second key). On a rerun, with the target table already populated, the code fails. The reason is it finds duplicate entries for the second key.
Any suggestions on how to make this work?
Thanks in advance.
Annie

Annie
You've spotted the problem (that two records have the same RIC). MERGE doesn't allow that; each record in the data being updated is only allowed to be updated once.
Is there a PK column (or columns) that we can rely on?
What you can try is to outer join FTP to INT. Something like:
MERGE INTO INT int1
USING (
    select columns_you_need
    from (
        select ftp.columns -- whatever they are
               , int2.columns
               , row_number() over (partition by int2.pk_columns order by int2.somecolumns) as rn
        from   ftp
        left join int int2
        on (the condition you used in your query)
    where rn=1
) s
WHEN MATCHED THEN UPDATE ...
WHEN NOT MATCHED THEN INSERT ...So if you can restrict the driving query so that only the first one of the possible updates actually gets presented to the MERGE operation, you might be in with a chance :-)
And of course this error is nothing to do with any triggers.
HTH
Regards Nigel

An error occurred during local report processing.The definition of the report '' is invalid.The definition of this report is not valid or supported by this version of Reporting Services. he report definition may have been created with a later version of R

Hi,
I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
  m_fields = NewArrayList()
  Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
      m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
  Next i
  'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
  stream = File.OpenWrite("D:\MyTestReport2.rdlc")
  Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
  ' Causes child elements to be indented
  writer.Formatting = Formatting.Indented
  ' Report element
  writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
  writer.WriteStartElement("Report")
  writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
  writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
  writer.WriteStartElement("ReportSections")
  writer.WriteStartElement("ReportSection")
  writer.WriteElementString("Width", "11in")
  writer.WriteStartElement("Body")
  writer.WriteElementString("Height", "5in")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Tablix")
  writer.WriteAttributeString("Name", Nothing, "Tablix1")
  writer.WriteElementString("Top", ".5in")
  writer.WriteElementString("Left", ".5in")
  writer.WriteElementString("Height", ".5in")
  writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
  writer.WriteStartElement("TablixBody")
  ' Tablix Columns
  writer.WriteStartElement("TablixColumns")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixColumn")
      writer.WriteElementString("Width", "1.5in")
      writer.WriteEndElement() ' TableColumnNext fieldName
  writer.WriteEndElement() ' TablixColumns' Header Row
  writer.WriteStartElement("TablixRows")
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
      ' writer.WriteAttributeString("CanGrow",  True)' writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      writer.WriteElementString("Value", fieldName)
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows          Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows")         Since Rows tag in header is not closed not need to open fresh tag
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      '  writer.WriteAttributeString("CanGrow", True)'  writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      'writer.WriteElementString("Value", fieldName)
      writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow
  writer.WriteEndElement() ' TablixRows'End of Details Rows
  writer.WriteEndElement() ' TablixBody
  writer.WriteStartElement("TablixRowHierarchy")
  writer.WriteStartElement("TablixMembers")
  writer.WriteStartElement("TablixMember")
  ' Group
  writer.WriteElementString("KeepWithGroup", "After")
  writer.WriteEndElement() ' TablixMember' Detail Group
  writer.WriteStartElement("TablixMember")
  writer.WriteStartElement("Group")
  writer.WriteAttributeString("Name", Nothing, "Details")
  writer.WriteEndElement() ' Group
  writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixRowHierarchy
  writer.WriteStartElement("TablixColumnHierarchy")
  writer.WriteStartElement("TablixMembers")
  'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
      writer.WriteStartElement("TablixMember")
      writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixColumnHierarchy
  writer.WriteElementString("DataSetName", "tbdataset")
  writer.WriteEndElement() ' Tablix
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' Body
  writer.WriteStartElement("Page")
  ' Page Header Element
  writer.WriteStartElement("PageHeader")
  writer.WriteElementString("Height", "1.40cm")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Textbox")
  writer.WriteAttributeString("Name", Nothing, "Textbox1")
  writer.WriteStartElement("Paragraphs")
  writer.WriteStartElement("Paragraph")
  writer.WriteStartElement("TextRuns")
  writer.WriteStartElement("TextRun")
  writer.WriteElementString("Value", Nothing, "ABC CHS.")
  writer.WriteEndElement() ' TextRun
  writer.WriteEndElement() ' TextRuns
  writer.WriteEndElement() ' Paragraph
  writer.WriteEndElement() ' Paragraphs
  writer.WriteEndElement() ' TextBox
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' PageHeader
  writer.WriteEndElement() ' Page
  writer.WriteEndElement() ' ReportSection
  writer.WriteEndElement() ' ReportSections' DataSources
  writer.WriteStartElement("DataSources")
  writer.WriteStartElement("DataSource")
  writer.WriteAttributeString("Name", Nothing, "tbdata")
  writer.WriteStartElement("DataSourceReference")
  writer.WriteEndElement() ' DataSourceReference
  writer.WriteEndElement() ' DataSource
  writer.WriteEndElement() ' DataSources'DataSet
  writer.WriteStartElement("DataSets")
  writer.WriteStartElement("DataSet")
  writer.WriteAttributeString("Name", Nothing, "tbdataset")
  writer.WriteStartElement("Query")
  writer.WriteElementString("DataSourceName", Nothing, "tbdata")
  'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
  writer.WriteElementString("CommandText", Nothing, "TableDirect")
  writer.WriteEndElement() ' Query'Fields
  writer.WriteStartElement("Fields")
  ForEach fieldName In m_fields
      writer.WriteStartElement("Field")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      writer.WriteElementString("DataField", fieldName)
      writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
      writer.WriteEndElement() ' FieldNext
  writer.WriteEndElement() ' Fields' rd datasetinfo
  writer.WriteEndElement() ' DataSet
  writer.WriteEndElement() ' DataSets
  writer.WriteEndElement() ' Report' Flush the writer and close the stream
  writer.Flush()
  stream.Close()
  'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
  Dim ms AsNewMemoryStream(myByteArray)
  'Supply Stream to ReportViewer
  ReportViewer1.LocalReport.LoadReportDefinition(ms)
  ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
An error occurred during local report processing.
The definition of the report '' is invalid.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
Details: Data at the root level is invalid. Line 1, position 1.
Can anybody guide me?

Hi Wendy Fu,
Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
options flashed.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services
or contain content that is not well-formed or not valid based on Reporting Services schemas
Details: Data at the root level is invalid
My web config has following references
<add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
<add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
May be I have to change these versions to 9 or 10.
First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
Once thanks for your reply.
Races

Getting Zero Sized Reply error in report from SQL query

Hi,
I have a Report from SQL Query in Portal 3.0.9. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
Lorena

Hi,
I have a Report from SQL Query in Portal 3.0.9. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
Lorena

Crystal Report error - The Handle is invalid;

I get the error 'The handle is Invalid' when I try to print a crystal report that is opened in the Report viewer.
I was wondering if anyone has encountered this is has a solution.
The report was created using Crystal Report 2008 for SAP B1.
Regards
Albert

Albert,
You may check those old threads first:
Embarrasing issue
Re: 5 : - The handle is invalid
Landscape test connection failure: The handle is invalid.
Thanks,
Gordon

"Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

I created a site column at the root of my site and I have publishing turned on. I selected the Hyperlink with formatting and constraints for publishing.
I went to my subsite and added the column. The request was to have "Open in new tab" for their hyperlinks. I was able to get the column to be added and yesterday we added items without a problem.
The problem arose when, today, a user told me that he could not edit the hyperlink. He has modify / delete permissions on this list.
He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
Link in New Window checkbox, the Display Text, and Tooltip:
"Message from Webpage There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem. I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
Summary from this link below: Comment out, below, in AssetPickers.js
//callbackThis.VerifyAnchorElement(HtmlElement, Config);
perform IISReset
This is referenced in the item below:
http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
TThThis is possibly the same information that I saw, possibly from the above link as reference.
http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
Thank you!
Matt

We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

ORA-30926: unable to get a stable set of rows in the source tables

hi,
I am loading data from source table to target table in a interface.
Using LKM incremental update .
In the merge rows step , getting the below error.
30926 : 99999 : java.sql.SQLException: ORA-30926: unable to get a stable set of rows in the source tables
please help as what should be done to resolve this.

Below is the query in the merge step...
when i run from SQL also, same error
SQL Error: ORA-30926: unable to get a stable set of rows in the source tables
30926. 00000 - "unable to get a stable set of rows in the source tables"
*Cause:    A stable set of rows could not be got because of large dml
activity or a non-deterministic where clause.
*Action:   Remove any non-deterministic where clauses and reissue the dml.
merge into     TFR.INVENTORIES T
using     TFR.I$_INVENTORIES S
on     (
          T.ORGANIZATION_ID=S.ORGANIZATION_ID
     and          T.ITEM_ID=S.ITEM_ID
when matched
then update set
     T.ITEM_TYPE     = S.ITEM_TYPE,
     T.SEGMENT1     = S.SEGMENT1,
     T.DESCRIPTION     = S.DESCRIPTION,
     T.LIST_PRICE_PER_UNIT     = S.LIST_PRICE_PER_UNIT,
     T.CREATED_BY     = S.CREATED_BY,
     T.DEFAULT_SO_SOURCE_TYPE     = S.DEFAULT_SO_SOURCE_TYPE,
     T.MATERIAL_BILLABLE_FLAG     = S.MATERIAL_BILLABLE_FLAG,
     T.LAST_UPDATED_BY     = S.LAST_UPDATED_BY
     ,T.ID     = TFR.INVENTORIES_SEQ.NEXTVAL,
     T.CREATION_DATE     = CURRENT_DATE,
     T.LAST_UPDATE_DATE     = CURRENT_DATE
when not matched
then insert
     T.ORGANIZATION_ID,
     T.ITEM_ID,
     T.ITEM_TYPE,
     T.SEGMENT1,
     T.DESCRIPTION,
     T.LIST_PRICE_PER_UNIT,
     T.CREATED_BY,
     T.DEFAULT_SO_SOURCE_TYPE,
     T.MATERIAL_BILLABLE_FLAG,
     T.LAST_UPDATED_BY
     ,T.ID,
     T.CREATION_DATE,
     T.LAST_UPDATE_DATE
values
     S.ORGANIZATION_ID,
     S.ITEM_ID,
     S.ITEM_TYPE,
     S.SEGMENT1,
     S.DESCRIPTION,
     S.LIST_PRICE_PER_UNIT,
     S.CREATED_BY,
     S.DEFAULT_SO_SOURCE_TYPE,
     S.MATERIAL_BILLABLE_FLAG,
     S.LAST_UPDATED_BY
     ,TFR.INVENTORIES_SEQ.NEXTVAL,
     CURRENT_DATE,
     CURRENT_DATE
     )

ORA-30926: unable to get a stable set of rows in the source table

When user are trying to open a form getting below error.
com.retek.platform.exception.RetekUnknownSystemException:ORA-30926: unable to get a stable set of rows in the source tables
Please advice
Edited by: user13382934 on Jul 9, 2011 1:32 PM

Please try this
create table UPDTE_DEFERRED_MAILING_RECORDS nologging as
SELECT distinct a.CUST_ID,
a.EMP_ID,
a.PURCHASE_DATE,
a.drank,
c.CONTACT_CD,
c.NEW_CUST_CD,
a.DM_ROW_ID
FROM (SELECT a.ROWID AS DM_ROW_ID,
a.CUST_ID,
a.EMP_ID,
a.PURCHASE_DATE,
dense_rank() over(PARTITION BY a.CUST_ID, a.EMP_ID ORDER
BY a.PURCHASE_DATE DESC, a.ROWID) DRANK
FROM deferred_mailing a) a,
customer c
WHERE a.CUST_ID = c.CUST_ID
AND a.EMP_ID = c.EMP_ID
AND (a.PURCHASE_DATE <= c.PURCHASE_DATE OR
c.PURCHASE_DATE IS NULL)
and a.drank=1;
The query you've posted is behaving according to the expectations. The inner select is returning one row and the outer is returning two as the
WHERE a.CUST_ID = c.CUST_ID
AND a.EMP_ID = c.EMP_ID
AND (a.PURCHASE_DATE <= c.PURCHASE_DATE OR
c.PURCHASE_DATE IS NULL)
conditions are seeing two rows in the table customer.
I've added the a.drank=1 clause to skip the duplicates from the inner table and distinct in the final result to remove duplicates from the overall query result.
For eg, if you have one more row in the deferred_mailing like this
SQL> select * from DEFERRED_MAILING;
CUST_ID EMP_ID PURCHASE_
444 10 11-JAN-11
444 10 11-JAN-11
then the query without "a.drank=1" will return 4 rows like this by the outer query.
CUST_ID EMP_ID PURCHASE_ DM_ROW_ID DRANK C N
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
It'll return the below even if we use distinct on the same query(i.e. without a.drank=1)
CUST_ID EMP_ID PURCHASE_ DM_ROW_ID DRANK C N
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
which contains duplicates again.
So, we need a combination of distinct and dense here.
btw, Please mark the thread as 'answered', if you feel you got your question answered. This will save the time of others who search for open questions to answer.
Regards,
CSM

Ora-30926 : unable to get a stable set of rows in source table

Dear All
When I try to load my cube I get the error "ora-30926 : unable to get a stable set of rows in source table".
Any idea? Googling for this error did not return any solutions.
My env:
source: Oracle 10g (10.2.x)
Target: Oracle 11g (11.1.0.7)
I am using warehouse builder 11.1.0.7 on Linux
thank you

Carsten / neashton
Thanks for your help. Duplicate rows were the issue.
I finally debugged the problem to my time dimension.
The OWB wizard generated time dimension contains only date, but no time.
Unfortunately, for me to uniquely identify my data, I need to include time also (detailed in how do I include 'Time' in a time dimension? .
Since Carsten was the first one to answer this, I am awarding the points to him.
thanks a lot both of you
Edited by: T2 on Jun 2, 2009 4:01 AM

Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).

Hi,
I have a file where fields are wrapped with ".
=========== file sample
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
==========
I am having a .net method to remove the wrap characters and write out a file without wrap characters.
======================
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
======================
the .net code is here.
========================================
public static string RemoveCharacter(string sFileName, char cRemoveChar)
object objLock = new object();
//VirtualStream objInputStream = null;
//VirtualStream objOutStream = null;
FileStream objInputFile = null, objOutFile = null;
lock(objLock)
try
objInputFile = new FileStream(sFileName, FileMode.Open);
//objInputStream = new VirtualStream(objInputFile);
objOutFile = new FileStream(sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString(), FileMode.Create);
//objOutStream = new VirtualStream(objOutFile);
int nByteRead;
while ((nByteRead = objInputFile.ReadByte()) != -1)
if (nByteRead != (int)cRemoveChar)
objOutFile.WriteByte((byte)nByteRead);
finally
objInputFile.Close();
objOutFile.Close();
return sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString();
==================================
however when I run the bulk load utility I get the error
=======================================
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).
==========================================
the bulk insert statement is as follows
=========================================
BULK INSERT Temp
FROM '<file name>' WITH
FIELDTERMINATOR = ','
, KEEPNULLS
==========================================
Does anybody know what is happening and what needs to be done ?
PLEASE HELP
Thanks in advance
Vikram

To load that file with BULK INSERT, use this format file:
9.0
4
1 SQLCHAR 0 0 "\"" 0 "" ""
2 SQLCHAR 0 0 "\",\"" 1 col1 Latin1_General_CI_AS
3 SQLCHAR 0 0 "\",\"" 2 col2 Latin1_General_CI_AS
4 SQLCHAR 0 0 "\"\r\n" 3 col3 Latin1_General_CI_AS
Note that the format file defines four fields while the fileonly seems to have three. The format file defines an empty field before the first quote.
Or, since you already have a .NET program, use a stored procedure with table-valued parameter instead. I have an example of how to do this here:
http://www.sommarskog.se/arrays-in-sql-2008.html
Erland Sommarskog, SQL Server MVP, [email protected]

Error in report getting "Invalid set of rows requested......."

Similar Messages

Maybe you are looking for