Error in result query

Hi all,
I have a problem with total row for one key figure in the query
Example:
    customer QTY OGNEW OGOLD %OG
     1000        300      50          10        4
     2000        500      70          20        2,5
tot                800     120         30        10
The problem is in the total row of column %OG.
The %OG is calculated as %OG=OGNEW-OGOLD/OGOLD, but the value in total row is wrong, why?
In the property of %OG I have setting not definition in the 'calculate result as' because must be calculate with the formula.
Can You help me please?
Thanks in advance
Gianmarco

The formula is already built as
%OG=OGNEW%OGOLD
and in property of key figure I've setting nothing defined,
Unfortunately I don't obtain right result.
Any suggest please?
Gianmarco

Similar Messages

Error in Result Query - Using %

Hi All,
I have this problem:
I'm using %A (Percentage Share) to calculate the percentage between two values. For example:
99 %A 51 = -48,48% (This result is OK)
But,
-1005 %A -1018 = -1,29% (This result is NOK, the correct is 1,29).
The same problem occurs when I'm use % (Percentage Variance).
The results are calculated correctly but the signal is inverted.
Can you help me?
Regards,
Alex
Brazil

Let your definition be as it is.Check my logic below.
Column A
Here you are getting result as follows now:(considering two examples)
case1: 10
Case 2: -1.29
Now in the new formula you can do this
Column A * -1 . Let this be column B.
Hide this column. and Columns A too.
Now in a new formula:Column C
If Column A is less than ColumnB then Column B else Column A. This will give yo all the results as you expected.
You can extend my logic to manage negative values further.....

No result returned or XML returned contains error in test query

Hello,
I have a problem with Visual Composer 7.0. When I try to execute a test query it shows the following error:
'No result returned or XML returned in the result contains error'. What could it be?
Thanks,
Belen

Either your query doesn't return results or you don't have the MSXML Parser installed on your client.

ADM Error processing results from query: Error: Index 0 out of range

11.1.2.1
When running quite a large book, we are getting the following error:
ADM Error processing results from query: Error: Index 0 out of range
The individual reports in the books are running fine.
PS. The report books that are giving this error run fine on 9.3.1
Could this be a time-out issue and how do we resolve it?

what is background datasource Essbase or HFM
do you have lot of data in pov please try below
>Do you have pov prompt
>increase jvm heap size for report server in reporting server
>Fr log files has some more detail

I am getting: Error in my omniportlet result query

hi
i need your help
i want to count number of records entered in each day, but CREATED_DATE is datetime, so i used the convert to extract the date but i am gettig error in testing query Error in executing Query : [ORA-00936: missing expression ]
this is the sql code:
SELECT
CONVERT(VARCHAR(10),CREATED_DATE,120) AS date FROM FEEDBACK
group by CONVERT(VARCHAR(10),CREATED_DATE,120)
thank u

I'm not too sure what syntax you're using, and Oracle doesnt have a "datetime" datatype. Is that SQLServer datatype and syntax?
Anyway, does this help?
Greg
SQL> select col1 from dt1;
COL1
20-JAN-01
20-JAN-01
20-JAN-01
21-JAN-01
22-JAN-01
22-JAN-01
6 rows selected.
SQL> select count(*) cnt, to_char(col1,'dd-mon-yy') as the_day from dt1 group by
to_char(col1,'dd-mon-yy') order by the_day asc;
       CNT THE_DAY
         3 20-jan-01
         1 21-jan-01
         2 22-jan-01
SQL>

Mapping proc output to vars gets error extracting result into a variable of type (DBTYPE_UI2)

Hi, we run std 2012. I have a proc (sets nocount on) whose params r shown in the first block . My execute ssis sql task mapping is shown in the block following that (same order as shown, the param sizes are all -1). The variable
characteristics and initial values are shown in the 3rd block. The execute sql task command is
exec usp_fileArrivalStatus ?,?,?,?,?,? output,? output,? output
when I run the proc in ssms followed by a select on the output fields, I get stat 0, instance id -1 and file name empty string (aka tick tick aka '')
The error is:
[Execute SQL Task] Error: Executing the query "exec usp_fileArrivalStatus ?,?,?,?,?,? output,? ou..." failed with the following error:
"An error occurred while extracting the result into a variable of type (DBTYPE_UI2)".
Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Does anybody know what is wrong?
CREATE PROCEDURE [dbo].[usp_fileArrivalStatus] @NewFilePattern varchar(500),
@PkgName varchar (257),
@appid int,
@MsgHistCreateDate date,
@messageFriendlyName varchar(500),
@arrivalStatus int output,
@instanceId bigint output,
@fileName varchar(500) output
VariableName Direction DataType ParamName
User::TranFilePattern Input VARCHAR 0
System::PackageName Input VARCHAR 1
User::AppID Input SHORT 2
User::todaysDate Input DATE 3
User::TranFileArriveStatus OUTPUT SHORT 5
User::TranFileInstanceId OUTPUT LARGE_INTEGER 6
User::TranFileName OUTPUT VARCHAR 7
User::TranFileFriendlyName Input VARCHAR 4
User::TranFilePattern,string,tranfile05-Nov-2014
User::fileDate,string,05-Nov-2014
System::PackageName,
User::AppID,int32,12
User::todaysDate,DateTime, set by select getdate()
User::TranFileArriveStatus,int32,0
User::TranFileInstanceId,Int64,0
User::TranFileName,string
User::TranFileFriendlyName,string,Tran File

I may have gotten past this. The ui showed the first execution of that proc as the aborting component but when I looked at my error code (-1073548784), and component name in the
message sent with notification email, I noticed the second component name. It too executes that proc and still had ushort for appid in sql task mapping and long for instance id. I changed these characteristics to match what I posted and got green
on the seq container that runs both.
I think I go thru this kind of adventure every time I try to map proc output to ssis vars.

Error in result of storeproc

I have a problem with cfstoredproc and Informix database,
when I invoke a stored procedure by cfstoredproc, it returns me
several columns with the same name (EXPRESSION) and repeat the
value of first column.
I am running CFMX 8.0.1 Enterprise, with Informix 9.40 and
built-in driver, wich works great, but when i try to use CFMX 8.0.1
with JDBC 3.50 for IBM Informix cfstoredproc error occurs. I need
this version of JDBC because I will upgrade to informix 11.50 and
CFMX 8.0.1.
This is the stored procedure...
CREATE PROCEDURE admgcn.stpbacklog (unidad1 char(1))
returning char(10), char(12), char(12), char(30), char(7), char(1),
char(40), char(30), char(8), int, varchar(255,0), varchar(255,0),
varchar(255,0), char(1), char(40), char(12), char(8);
define r_fecemision char(10);
define r_numaviso like r3avisos.numaviso;
define r_numorden like r3avisos.numorden;
define r_ubicacion like r3avisos.ubicacion;
define r_inop like r3otinopcd.noinop;
define r_prior like r3avisos.prior;
define r_descaviso like r3avisos.descaviso;
define r_resp like r3avisosop.responsable;
define r_numsem like r3avisosop.numsem;
define r_porc like r3activ.porcentaje;
define r_coment like r3avisosop.comentop;
define r_solpeds like r3avisosop.solpeds;
define r_comentab like r3avisosop.comentab;
define r_repercusion like r3avisos.repercusion;
define r_status like r3avisos.status;
define r_pn like r3avisos.numaviso;
define r_ptotrbres like r3avisos.ptotrbres;
define valor int;
let valor = 1;
if (weekday(today) = 1) then let valor = 3;
end if;
begin
set isolation to dirty read;
foreach
SELECT
a.fecemision, a.numaviso, a.numorden, a.ubicacion, ao.inop,
a.prior prioridad, a.descaviso descripcion, ao.responsable,
ao.numsem, 0 porcentaje, nvl(trim(ao.comentop),'') comentop,
nvl(trim(ao.solpeds),'') solpeds,
nvl(trim(ao.comentab[1,234]), '') comentab, a.repercusion,
a.status,trim((select a.numaviso from r3avisos avs where unaviso =
unidad1 and status[1,4] <> 'MECE' and edodisp = '2' and
prior is not null and a.numaviso = avs.numaviso)) PN, ptotrbres
INTO
r_fecemision, r_numaviso, r_numorden, r_ubicacion, r_inop,
r_prior, r_descaviso, r_resp, r_numsem, r_porc, r_coment,
r_solpeds, r_comentab, r_repercusion, r_status, r_pn, r_ptotrbres
FROM
r3avisos a, outer r3avisosop ao
WHERE
a.status[1,4] <> ('MECE') and
a.prior in ('1', '2', '3', '4', '5') and
(a.repercusion <> 'A' or a.repercusion is null) and
a.claseaviso = 'AN' and
ao.numaviso = a.numaviso and
a.unaviso = unidad1 and
a.numorden is null {and
(DATE(TO_DATE(creado,'%d/%m/%Y')) >= today - valor and
DATE(TO_DATE(creado,'%d/%m/%Y')) <= today)}
UNION
SELECT
a.fecemision, a.numaviso, a.numorden, a.ubicacion, '',
r3o.prioridad, r3o.descripcion, ao.responsable, r3o.pep numsem,
r3a.porcentaje porcentaje, nvl(trim(ao.comentop),'') comentop,
nvl(trim(ao.solpeds),'') solpeds,
nvl(trim(ao.comentab[1,234]), '') comentab, a.repercusion,
r3o.statussist,trim((select a.numaviso from r3avisos avs where
unaviso = unidad1 and status[1,4] <> 'MECE' and edodisp = '2'
and prior is not null and a.numaviso = avs.numaviso)) PN,
r3o.ptotrbres
FROM
r3avisos a, outer r3avisosop ao, r3orden r3o, r3activ r3a
WHERE
r3o.statusus[1,4] <> 'CANC' and r3o.statussist[1,4] in
('LIBD','LIBE', 'ABIE') and
r3o.prioridad in ('1', '2', '3', '4', '5') and
(a.repercusion <> 'A' or a.repercusion is null) and
r3o.claseorden = 'LV01' and
r3o.claseact = 'N00' and
a.unaviso = unidad1 and
ao.numaviso = a.numaviso and
a.numorden = r3o.numorden and
r3a.numorden = a.numorden and
r3a.porcentaje < 100 and
r3a.numope is not null
UNION
SELECT
a.fecemision, a.numaviso, a.numorden, a.ubicacion, '',
r3o.prioridad, r3o.descripcion, ao.responsable, r3o.pep numsem,0
porcentaje, nvl(trim(ao.comentop),'') comentop,
nvl(trim(ao.solpeds),'') solpeds,
nvl(trim(ao.comentab[1,234]), '') comentab, a.repercusion,
r3o.statussist,trim((select a.numaviso from r3avisos avs where
unaviso = unidad1 and status[1,4] <> 'MECE' and edodisp = '2'
and prior is not null and a.numaviso = avs.numaviso)) PN,
r3o.ptotrbres
FROM
r3avisos a, outer r3avisosop ao, r3orden r3o
WHERE
r3o.statusus[1,4] <> 'CANC' and r3o.statussist[1,4] in
('LIBD','LIBE', 'ABIE') and
r3o.prioridad in ('1', '2', '3', '4', '5') and
(a.repercusion <> 'A' or a.repercusion is null) and
r3o.claseorden = 'LV01' and
r3o.claseact = 'N00' and
a.unaviso = unidad1 and
ao.numaviso = a.numaviso and
a.numorden = r3o.numorden and
r3o.numorden not in (select numorden from r3activ where
numorden is not null and numorden <> 'N/A')
ORDER BY
ptotrbres, prioridad, numaviso
return
r_fecemision, r_numaviso, r_numorden, r_ubicacion,
r_inop, r_prior, r_descaviso, r_resp, r_numsem, r_porc,
r_coment,
r_solpeds, r_comentab, r_repercusion, r_status, r_pn,
r_ptotrbres with resume;
end foreach;
end;
end procedure
as you can see I return several columns with different names
This is the way how I invoke the stored
<cfstoredproc datasource="prueba"
procedure="stpbacklog">
<cfprocparam cfsqltype="CF_SQL_CHAR" value="1">
<cfprocresult name="RS">
</cfstoredproc>
<cfdump var="#RS#"/>
This is the result
query
(EXPRESSION) (EXPRESSION) (EXPRESSION) (EXPRESSION)
(EXPRESSION) (EXPRESSION) (EXPRESSION) (EXPRESSION) (EXPRESSION)
(EXPRESSION) (EXPRESSION) (EXPRESSION) (EXPRESSION) (EXPRESSION)
(EXPRESSION) (EXPRESSION) (EXPRESSION)
1 06/01/2009 06/01/2009 06/01/2009 06/01/2009 06/01/2009
06/01/2009 06/01/2009 06/01/2009 06/01/2009 06/01/2009 06/01/2009
06/01/2009 06/01/2009 06/01/2009 06/01/2009 06/01/2009 06/01/2009
2 07/01/2009 07/01/2009 07/01/2009 07/01/2009 07/01/2009
07/01/2009 07/01/2009 07/01/2009 07/01/2009 07/01/2009 07/01/2009
07/01/2009 07/01/2009 07/01/2009 07/01/2009 07/01/2009 07/01/2009
3 06/01/2009 06/01/2009 06/01/2009 06/01/2009 06/01/2009
06/01/2009 06/01/2009 06/01/2009 06/01/2009 06/01/2009 06/01/2009
06/01/2009 06/01/2009 06/01/2009 06/01/2009 06/01/2009 06/01/2009
4 23/06/2008 23/06/2008 23/06/2008 23/06/2008 23/06/2008
23/06/2008 23/06/2008 23/06/2008 23/06/2008 23/06/2008 23/06/2008
23/06/2008 23/06/2008 23/06/2008 23/06/2008 23/06/2008 23/06/2008
5 23/06/2008 23/06/2008 23/06/2008 23/06/2008 23/06/2008
23/06/2008 23/06/2008 23/06/2008 23/06/2008 23/06/2008 23/06/2008
23/06/2008 23/06/2008 23/06/2008 23/06/2008 23/06/2008 23/06/2008
6 23/12/2008 23/12/2008 23/12/2008 23/12/2008 23/12/2008
23/12/2008 23/12/2008 23/12/2008 23/12/2008 23/12/2008 23/12/2008
23/12/2008 23/12/2008 23/12/2008 23/12/2008 23/12/2008 23/12/2008
7 28/12/2008 28/12/2008 28/12/2008 28/12/2008 28/12/2008
28/12/2008 28/12/2008 28/12/2008 28/12/2008 28/12/2008 28/12/2008
28/12/2008 28/12/2008 28/12/2008 28/12/2008 28/12/2008 28/12/2008
8 24/12/2008 24/12/2008 24/12/2008 24/12/2008 24/12/2008
24/12/2008 24/12/2008 24/12/2008 24/12/2008 24/12/2008 24/12/2008
24/12/2008 24/12/2008 24/12/2008 24/12/2008 24/12/2008 24/12/2008
9 20/12/2008 20/12/2008 20/12/2008 20/12/2008 20/12/2008
20/12/2008 20/12/2008 20/12/2008 20/12/2008 20/12/2008 20/12/2008
20/12/2008 20/12/2008 20/12/2008 20/12/2008 20/12/2008 20/12/2008
10 18/10/2008 18/10/2008 18/10/2008 18/10/2008 18/10/2008
18/10/2008 18/10/2008 18/10/2008
You see how repeat first column? This is the problem I have.
I hope you can support me.
In advance,
Thanks a lot.

Tom,
thanks for your support. My problem is when CFSTOREDPROC
returns the result, because it returns me several columns with the
same name (EXPRESSION). In CFMX 8 with Informix Driver, it returned
COMPUTED_COLUMN_1, COMPUTED_COLUMN_2 and so, but now, with CFMX
8.0.1 and JDBC driver for Informix 11.50 returns (EXPRESSION) and
repeat the value of first row first column. I tryed with Centauro
(ColdFusion 9) using Informix Driver and all works great. What I am
doing is transform my StoredProcedures to CFQUERY and CFC, but of
course, it is a lot of work, :D

MS SQL - Syntax error for valid query

I have a problem with the second query in this code (gives me
a syntax error in my HAVING line)
<cfquery name="getDupes" datasource="#application.ODBC1#"
dbtype="ODBC" username="#application.userNameODBC1#"
password="#application.userPassODBC1#">
SELECT *
FROM view_FormCount
WHERE formCount >= 2
ORDER BY formNum
</cfquery>
<cfset variables.lstForms = "">
<cfoutput query="getDupes">
<cfset variables.lstForms=
listAppend(variables.lstForms,"'#getDupes.formNum#'")>
</cfoutput>
<cfset variables.whereClause = "(formNum =
#ReplaceNoCase(variables.lstForms,',',' OR formNum =
','ALL')#)">
<cfquery name="getDetails"
datasource="#application.ODBC1#" dbtype="ODBC"
username="#application.userNameODBC1#"
password="#application.userPassODBC1#">
SELECT tblForms.formNum, tblForms.formName,
tblForms.formCustNum, tblCompanies.companyAbbr
FROM tblForms INNER JOIN tblCompanies ON tblForms.formCustNum
= tblCompanies.companyNum
GROUP BY tblForms.formNum, tblForms.formName,
tblForms.formCustNum, tblCompanies.companyAbbr
HAVING #variables.whereClause#
ORDER BY tblForms.formNum, tblForms.formCustNum
</cfquery>
Now, the really odd thing is if I just take the query text
out of the CFQUERY tags and use CFOUTPUT instead (to see in my
browser what query is getting executed) I get a query that I can
paste into Enterprise Mgr and runs fine.
I can even paste the resulting text into my code in a CFQUERY
and CF will run it fine.
In other words, the dynamic version query gives me an error,
but if I just output the SQL statement, copy-and-paste that into
the CFQUERY that's erroring out (replacing what's there) to run as
a static query, it works fine (sample of static query below).
The error I get when I try to do it dynamically is "Error
Executing Database Query. [Macromedia][SQLServer JDBC
Driver][SQLServer]Line 4: Incorrect syntax near '10169318'. The
error occurred on line 21." which is where the HAVING clause
starts.
SELECT tblForms.formNum, tblForms.formName,
tblForms.formCustNum, tblCompanies.companyAbbr FROM tblForms INNER
JOIN tblCompanies ON tblForms.formCustNum = tblCompanies.companyNum
GROUP BY tblForms.formNum, tblForms.formName, tblForms.formCustNum,
tblCompanies.companyAbbr HAVING (formNum = '10169318' OR formNum =
'1016CONCERTA' OR formNum = '1016NSAIDS' OR formNum =
'1016STRATTERA' OR formNum = '1016WELLBUTRIN' OR formNum =
'18504211' OR formNum = '185093807' OR formNum = '73208565' OR
formNum = '732120027' OR formNum = '7322154' OR formNum = '7323402'
OR formNum = '7323522' OR formNum = '73238900' OR formNum =
'7324211' OR formNum = '7324211S' OR formNum = '7324265' OR formNum
= '73242891' OR formNum = '732434341' OR formNum = '732434342' OR
formNum = '73243435' OR formNum = '73243436' OR formNum =
'73243439' OR formNum = '73243440' OR formNum = '73243441' OR
formNum = '73243442' OR formNum = '73243443' OR formNum = '7324359'
OR formNum = '7324360' OR formNum = '7324370' OR formNum =
'7324560' OR formNum = '7324959' OR formNum = '7326411ptreg' OR
formNum = '7326599' OR formNum = '7326600' OR formNum = '7326620'
OR formNum = '7326707' OR formNum = '7326931' OR formNum =
'7328410' OR formNum = '732851031TOP' OR formNum = '7328512' OR
formNum = '7328548' OR formNum = '7328548P2' OR formNum =
'7328548P3' OR formNum = '7328548P4' OR formNum = '73289400' OR
formNum = '73290D' OR formNum = '7329154' OR formNum =
'73291544JHS' OR formNum = '73291545JHS' OR formNum =
'73291546JHSMH' OR formNum = '73291547JHSMH' OR formNum = '7329174'
OR formNum = '7329308' OR formNum = '7329402' OR formNum =
'7329424' OR formNum = '7329455' OR formNum = '7329520' OR formNum
= '7329539' OR formNum = '73297701JH' OR formNum = '73298273' OR
formNum = '73298400' OR formNum = '73298403' OR formNum =
'73298404' OR formNum = '7329883' OR formNum = '73298860' OR
formNum = '7329887' OR formNum = '73298974' OR formNum = '7329899'
OR formNum = '7329899S' OR formNum = '73299190' OR formNum =
'7329987' OR formNum = '7329999PTO' OR formNum = '732AV5160' OR
formNum = '732CMHFRAZ' OR formNum = '732HIPAA' OR formNum =
'732HIPAAFLYERS' OR formNum = '734HEART' OR formNum = '7444711' OR
formNum = '7449230' OR formNum = '744HR4991' OR formNum =
'7538014MI' OR formNum = '77511044' OR formNum = '77511045' OR
formNum = '775stampnochange' OR formNum = '80851001BLUE' OR formNum
= '80MR4200' OR formNum = '80MR4273' OR formNum = '80MR4274' OR
formNum = '80MR4300' OR formNum = '80MR9934' OR formNum =
'80MR9935' OR formNum = '80SHC100' OR formNum = '80SHC4301' OR
formNum = '80SHC9830' OR formNum = '80SHC9832') ORDER BY
tblForms.formNum, tblForms.formCustNum

AWFrueh1808 wrote:
> OK, that's simple enough. But then I'm really confused
as to why the query in
> my original post/example didn't work.
>
> The only single quotes in my #whereClause# variable were
wrapped around each
> varchar value in the WHERE clause (well, HAVING) as in
HAVING formNum = '12345'
> OR formNum = '54321'
>
> I never used a single quote within the value itself. And
yet
> preservesinglequotes fixed it. So what was CF doing? Why
did the single
> quotes still show up in the error msg - and in the right
place?
>
As I said the default behavior is to escape the quotes in
your variables
as data. So the default output of your SQL statement, before
preserveSingleQuotes() would be like this.
HAVING formNum = ''12345'' OR formNum = ''54321''
As you can see that is not the desired results in your case.
In your
case you have the proper number of single quotes in your
string and you
do not want any added. You want to preserve them so to say.
Thus
adding preserveSingleQuotes() around your whereClase
variable, i.e.
preserveSingleQuotes(whereClause) says do not add any quotes,
keep them
all single.

Count() function throws error in EQL query for metric

Hi
I am trying to use count function in EQL query for Metric Bar to show the number of occurrences of a record.
When the record type doesn't exist i expect the function to return count as 0. Instead the function throws a runtime exception and the whole Metric Bar portlet fails, with error No Results Available. Even though other components in the metric bar have valid results.
2013-02-21 13:03:51,216 WARN [MetricsBarQueryProcessor] The EQL query does not return any results.
2013-02-21 13:03:51,216 ERROR [MetricsBarQueryProcessor] The EQL query does not return any results.
2013-02-21 13:03:51,216 WARN [MetricsBarResultsProcessor] No statement results to process.
The EQL query i am using is
RETURN NUMBER_OCCURS AS SELECT COUNT(EMP_ID) AS NUMBER_OCCURS where EMP_NAME IS NOT NULL group;
I tried using COALESCE but that doesn't help.
Can some one please suggest a workaround to this?

Srikanth,
Two statements are used here because the original question was pertaining to the null set (where there are employees in the nav state but no employees that fit the special analytics criteria in the navigation state). The question/answer has nothing to do with what is in the COUNT parentheses clause as Counting a null set will always give you NULL, not 0, no matter what you put in there.
What we're really doing, in the second part of the query, is writing a query over a set of data that is not the null set (i.e. the current navigation state). This allows the 0 value to come through in the case where the first analytics statement is evaluated over a null set of records. If there were truly no records in the navigation state, this too would return a null set and not zero.
Hope that makes sense, feel free to respond (either on here or offline) if it's unclear.
Regards,
Patrick Rafferty
http://branchbird.com

Database error: The MDX query

Hello,
I am working on BO 4.0. I have created a BEx query in BI 7.0(allow external access to this query is enabled) and executed in Analyzer it is working fine there. I now created universe by using this BEx query which has 3 dimensions and 2 measures.
Now I wanted to create a WEBI on top of that universe, when I tried to drag the dimensions it is showing the following error.
Database error: The MDX query SELECT { } ON COLUMNS , CROSSJOIN( CROSSJOIN( [ZCOUNTRY].[LEVEL01].MEMBERS, [ZCUSTGRP].[LEVEL01].MEMBERS ), [ZCITY].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_CAPTION ON ROWS FROM [ZDEMO_001/REP_20110829064115] failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (IES 10901) (WIS 10901)
I also tried with Live Office the result is the above error message. I am now clueless of how get out of this. Please help me.
Your response is always appreciated. Many Thanks.
Note: I dont have any filters here.
regards,
Naresh

Who are doing Scheduling operation??
Developer or Admin??
Dev: Check whether he/she has rights to Schedule (Ask your BO Admin).
I'm Back

? Mail [12721] Error 1 performing query: WHERE clause too complex...

Console keeps showing this about a zillion times in a row, a zillion times a day: "Mail [12721] Error 1 performing query: WHERE clause too complex no more than 100 terms allowed"
I can't find any search results anywhere online about this.
Lots of stalls and freezes in mail, finder/os x, and safari -- freqent failures to maintain a broadband connection (multiple times every day).
All apps are slow, cranky with interminable beach balls getting worse all the time.
anyone know what the heck is going on?

Try rebuilding the mailbox to see if that helps.
Also, how much disk space is available on your boot drive?

Web Analysis Error -- Error while executing query and retrieving data

Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveW

Hi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P

Error while running query in BI Answer

Hi All,
I am getting this error while executing a query in BI Answer.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 1114, message: ORA-01114: IO error writing block to file %s (block # %s) at OCI call OCIStmtExecute
Do anyone have any idea about this error. The query was running and i was able to see the output but suddenly it throws this error.
Awaiting for response.
Thanks
Ashok

Its an Oracle database error, possibly caused because your file system has filled up, or because the disk device is no longer available. Possibly caused by a Sort operation on your query causing the TEMP segment to auto extend and fill up the filesystem, but I'm guessing at the last bit.
You need to contact your DBA to investigate further.
Edited by: Matt T on Dec 16, 2008 10:38 AM

Error while executing query in OLAP server

Dear all,
we are using APD to extracted sales data for the last 3 months .this APD was executed perfectly till yesterday.
in today's run APD got failed with error message as below
"@5C\QError@ Fiscal year variant Z3 is not maintained for calendar year 9999
"@5C\QError@ Error while executing query in OLAP server; redesign query.
Please suggest corrective action .
I have tried executing manually with less selections on creation date by no success..
regards,
puru

Purushotham wrote:
Hi Jeeth,
>
> in query we have selection for " currency type " and created on " .we are not using fiscal year variant.
>
> in first strep of APD design only we have a problem and also recently there are no changes to this APD .
>
> It was executed perfectly on till 4th .
>
> Edited by: Purushotham on Feb 6, 2012 12:48 PM
Dear Purushotham, You can maintain the Fiscal year Variant in OB29. 2 possibilities, #1 : Data for the FYV/Year could be wrong. #2 : Updates for Fiscal Year might not have been done. You can maintaine FY varients up to FY 2XXX in your BW system. This should fix the error. The table T009 must be the same as we get when we do OB29 TCode in BW, so via SPRO do rebuild of table again.
Edited by: Arun Bala G on Feb 6, 2012 4:05 PM

Getting below error while opening query in bex 3.5x

Dear Guru's
I am getting below error while opening query in bex 3.5x
The following object were not found when accesing the server .
Press repair to correct the problem (included parts of query deleted) press cancel to undo the last action.
Regards
Karan

Hi,
1) When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
2) so create an authorization object for each of these attributes with * (full authorization)
Regards,
Marasa.

Error in result query

Similar Messages

Maybe you are looking for