Error in Running LAS2-Change Sequence Schedule
Hi all
I encountered Following Error when Running LAS2-Change Sequence Schedule in Repetitive :
Exception 4 when determining start and end times
Message no. S)009
Diagnosis
Errors occurred when scheduling the planned order.
Procedure
Check the master data - especially the takt time definitions in Line
Design. Otherwise, contact your system administrator
I checked all production version sand scheduling and capacity tab and line Design takt times as well but couldn't find the source of Error.Would you please help me.
Regards
Babab Bolourchi
Something is happened after your recon which is erroring out and causing a roll back. You need to understand what all tasks are running after the recon by watching the full log, and not just the error at the end.
-Kevin
Similar Messages
-
ERROR while running attribute change run.
hi sap xperts,
I got an error while running the attribute change run in a process chain.
At first i got an error "The action is locked by a change run"
SO I DID THE FOLLOWING STEPS.
1.RUN ATTRIB CHANGE RUN MANUALLY IT RUN SUCCESSFULLY,but the process chain is still red.
Q1.Is there any way to link the manually run attrib chnage to process chain so that the process chain becomes Green?
2.SM12 - realease the locks and right click the pc and repeat.It didn't work
Q1.While removing the locks what should we remove,bcoz i removed all the locks?
3.I again removed the lock and repeat the process but still i didn't work.Now its chowing "SQL ERROR OCCURED WHILE ACCESSING"
So the Process chain got stuck,Can any body help me to run the attrib chnage run.
If possible can anybody send the Process chain monitoring documents to my email id:
<email ID removed>
please.thanks in advance,i know how to say thanks in sdn.At any point in time only one attribute change run can run in the system. The other ACR's will fail due to locks. In your case, to set the process chain to green, try the following steps.
Open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
The above steps will help you continue with the rest of the process chain (thus avoiding manual runs) but the failed step might still remain red. Hope this helps. -
Error 16389 running a Task Sequence to install software
We've run into multiple WinXPProSP3 computers generating error code 16389 when trying to run a TS. After searching on Google, we found this,
http://blogs.technet.com/b/smsandmom/archive/2007/10/29/sccm-2007-task-sequence-fails-drive-letter-not-displayed.aspx
, which led to another article to modify a RegKey, HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318} , to add a key of UpperFilters, with a value of PartMgr. The key WAS missing on the machines with
the error, and, adding that key and value DOES fix the problem. This key and value seem to be default for the OS.
However, searching Google for that RegKey has a LOT of suggestions to delete that key and value, due to issues with USB Thumbdrives and iPods not being seen when plugged in--so, it seems that there may be a conflict.
Does anyone know of a fix for Error 16389 without having to add that key, if it's going to cause other problems?
Thanks.Hi,
Will you please past the detailed errors in the smsts.log?
From your description your are using TS to install software right?
If so you should first make sure this software package meats the following requirement when it was deployed through TS:
this program can be installed under local system account.
this program can be installed without any user interaction (such as: press next button).
this program will not force computer reboot, it allows sccm ts to manage the reboot.
If your OSD TS return 16389 exit code, you can try to change the volume license keys. Because once i have seem this error and it was solved by changing the volume license key.
Hope this will help.
Thanks -
Hi,
I am running Financial Report batch file via command line i am getting below error.
D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>ant -q -f "D:
\Oracle\MIDDLE~1\EPMSYS~1\products\FINANC~2\bin\BatchAdmin.xml" batch.schedule
ANT_HOME is set incorrectly or ant could not be located. Please set ANT_HOME.
D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>
Already i have ANT_HOME =D:\Oracle\Middleware\modules\org.apache.ant_1.7.1 and added to ANT_HOME to the PATH variable. I restarted the system but still i am getting same error.
Please help me on this.
Thanks,
NareshHi Celvin,
Thanks for the reply.
D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>BatchName
D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>ScheduleBatch
D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin\BatchName.xml ht
tp://localhost:19000
D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>ant -q -f "D:
\Oracle\MIDDLE~1\EPMSYS~1\products\FINANC~2\bin\BatchAdmin.xml" batch.schedule
Unable to locate tools.jar. Expected to find it in C:\Program Files\Java\jre7\li
b\tools.jar
[echo] Batch accepted for scheduling: D:\Oracle\MIDDLE~1\EPMSYS~1\products\
FINANC~2\bin\Sch-1.xml
Now i am getting below information when i ran the scheduled batch.
Why i am getting
Unable to locate tools.jar. Expected to find it in C:\Program Files\Java\jre7\li
b\tools.jar
error.How to rectify this problem. How to make to point it to JDK path ? where i need to update ?
I have already set JAVA_HOME setting to JDK path and updated in the "PATH" variable.
Thanks,
Naresh Mopala. -
Security Violation Error while running schedule task from OIM.
Hi All,
I am getting this error while running a custom java schedule task from OIM:
*Thor.API.Exceptions.tcAPIException [EJB:010160] Security Violation: User '<anonymous>' has insufficient permission to access EJB:*
type=<ejb>,application=Xellerate,module=xlDataObjectBeans.jar,ejb=tcReconciliationoperations,method=createDeleteReconciliationEvent
at Thor.API.Operations.tcReconciliationOperationsClient.createDeleteReconciliationEvent(UnKnown Source).
I got this error as soon as my code start creating Delete Reconciliation Event.
Note: I have already protected the JNDI Namespace.
Please provide some pointers.
Regards,
SunnyHi Rajiv,
Check this:
package com.centrica.iam.scheduletask;
import java.io.BufferedReader;
import java.io.File;
import java.io.FileFilter;
import java.io.FileNotFoundException;
import java.io.FileReader;
import java.text.SimpleDateFormat;
import java.util.ArrayList;
import java.util.Calendar;
import java.util.Date;
import java.util.HashMap;
import java.util.Hashtable;
import java.util.Iterator;
import java.util.Set;
import oracle.iam.connectors.common.ConnectorLogger;
import com.thortech.xl.dataaccess.tcDataSet;
import com.thortech.xl.dataaccess.tcDataSetException;
import com.thortech.xl.dataobj.PreparedStatementUtil;
import com.thortech.xl.orb.dataaccess.tcDataAccessException;
import com.thortech.xl.scheduler.tasks.SchedulerBaseTask;
import Thor.API.tcResultSet;
import Thor.API.Exceptions.tcAPIException;
import Thor.API.Exceptions.tcInvalidValueException;
import Thor.API.Operations.tcLookupOperationsIntf;
import Thor.API.Operations.tcReconciliationOperationsIntf;
import Thor.API.Operations.tcSchedulerOperationsIntf;
public class CustomFlatFile extends SchedulerBaseTask {
private static tcSchedulerOperationsIntf schedulerIntf;
private static tcLookupOperationsIntf lookupIntf;
private static tcReconciliationOperationsIntf reconIntf;
String sObjectName;
String LookupName;
String LookupName2;
String FileDirectory;
String FileName;
String File;
String delimeter;
String isDeleteTrue;
HashMap<String, String> attrMap = new HashMap();
HashMap<String, String> delMap = new HashMap();
HashMap<String, String> finalMap = new HashMap();
ArrayList list = new ArrayList();
public boolean isReconStopped;
public CustomFlatFile()
isReconStopped = false;
public void init()
LookupName = getAttribute("Attribute Lookup Name");
FileDirectory = getAttribute("Directory Path");
FileName = getAttribute("File Name");
delimeter = getAttribute("Delimeter");
sObjectName = getAttribute("Resource Object Name");
isDeleteTrue = getAttribute("Is Delete Allowed");
public void execute(){
try {
System.out.println("Start Exceute");
//Initiate lookupIntf
lookupIntf = (tcLookupOperationsIntf)getUtility("Thor.API.Operations.tcLookupOperationsIntf");
reconIntf=(tcReconciliationOperationsIntf)getUtility("Thor.API.Operations.tcReconciliationOperationsIntf");
catch (tcAPIException tcapiexception){
tcapiexception.printStackTrace();
//logger.error(classname, s, tcapiexception.toString());
//logger.setStackTrace(tcapiexception, classname, s, tcapiexception.getMessage());
catch (Exception excep){
excep.printStackTrace();
//logger.error(classname, s, excep.toString());
//logger.setStackTrace(excep, classname, s, excep.getMessage());
attrMap = readLookup(LookupName);
System.out.println(attrMap.toString());
readFile();
if (isDeleteTrue.equalsIgnoreCase("true"))
performDelete();
System.out.println("Finish Execute");
public void performDelete()
System.out.println("Start Perform delete");
int k = list.size();
System.out.println("list size " + list.size());
try
Thread.sleep(15000);
/* Hashtable ahashtable[] = new Hashtable[k];
Hashtable hashtable = new Hashtable();
for (int i=0;i<k;i++)
hashtable.put("User Id", list.get(i));
ahashtable[i] = hashtable;
System.out.println(list.get(i));
Set set = reconIntf.provideDeletionDetectionData(sObjectName, ahashtable);
System.out.println("Set--" + set.toString());
tcResultSet tcresultset = reconIntf.getMissingAccounts(sObjectName, set);
System.out.println("tcresultset - " + tcresultset.getRowCount());
if (!(tcresultset.isEmpty()))
long l[] = reconIntf.deleteDetectedAccounts(tcresultset);
for (int i1=0;i1<l.length;i1++)
System.out.println("delete recon key " + l[i1]);
//Get the existing list of Managed users
tcDataSet tcdataset = new tcDataSet();
tcDataSet tcdataset1 = new tcDataSet();
String query = "select orf.orf_fieldname,prf.prf_columnname, sdk.sdk_name from orf, sdk, pkg, tos, prf, obj " +
"where pkg.obj_key = obj.obj_key and pkg.pkg_key = tos.pkg_key and tos.sdk_key is not null " +
"and tos.sdk_key=sdk.sdk_key and tos.tos_key=prf.tos_key and prf.prf_iskey='1' and prf.orf_key=orf.orf_key " +
"and orf.orf_parent_orf_key is null and obj.obj_name='" + sObjectName + "'";
tcdataset.setQuery(getDataBase(), query);
tcdataset.executeQuery();
String FFName = tcdataset.getString("prf_columnname");
String FName = tcdataset.getString("sdk_name");
String ROFName = tcdataset.getString("orf_fieldname");
System.out.println("form- " + FName + " Field- " + FFName);
query = "select " + FFName + " from " + FName + " udtable, oiu a, ost b " +
"where udtable.orc_key=a.orc_key and a.ost_key=b.ost_key and b.ost_status!='Revoked'";
System.out.println(query);
tcdataset1.setQuery(getDataBase(), query);
tcdataset1.executeQuery();
int i = tcdataset1.getRowCount();
ArrayList list1 = new ArrayList();
String s1 = null;
System.out.println("N. of rows--" + i);
for (int j=0;j<i;j++)
tcdataset1.goToRow(j);
s1 = tcdataset1.getString(0);
System.out.println("s1---" + s1);
if (!(list.contains(s1)))
list1.add(s1);
System.out.println("under if--" + s1);
//Getting the existing list of unmanaged users
query = "select distinct (b.rcd_value) from rce a, rcd b, orf c, obj d where a.rce_key=b.rce_key and " +
"b.orf_key=c.orf_key and c.orf_fieldname='" + ROFName + "' and a.rce_status!='Event Linked' " +
"and a.obj_key = d.obj_key and d.obj_name='" + sObjectName + "'";
tcdataset1.setQuery(getDataBase(), query);
tcdataset1.executeQuery();
i = tcdataset1.getRowCount();
System.out.println("No. Of Unmanaged Users " + i);
for (int j=0;j<i;j++)
tcdataset1.goToRow(j);
s1 = tcdataset1.getString(0);
System.out.println("s1---" + s1);
if (!(list.contains(s1)))
list1.add(s1);
System.out.println("under if--" + s1);
int k1 = list1.size();
System.out.println("list1 size--" + k1);
for (int j1=0;j1<k1;j1++)
delMap.clear();
delMap.put(ROFName, (String)list1.get(j1));
System.out.println(delMap.toString());
long l = reconIntf.createDeleteReconciliationEvent(sObjectName, delMap);
System.out.println("delete recon key--- " + l);
catch (Exception exception)
exception.printStackTrace();
public void readFile(){
String s = "readFile()";
//logger.setMethodStartLog(classname, s);
HashMap map = new HashMap();
try {
File = getFile();
BufferedReader reader = new BufferedReader(new FileReader(new
File(File)));
String line = "";
int k = attrMap.size();
String value[] = new String[k];
String Header[]= new String[k];
if (delimeter.equalsIgnoreCase("|"))
delimeter = "\\" + delimeter;
line = reader.readLine();
Header = line.split(delimeter);
while((line = reader.readLine()) != null)
value = line.split(delimeter);
k = value.length;
for (int i = 0;i<k;i++){
finalMap.put(attrMap.get(Header), value[i]);
System.out.println(finalMap.toString());
System.out.println("Start Ignoring Event");
if (!(reconIntf.ignoreEvent(sObjectName, finalMap)))
System.out.println("Not Ignored");
long l1 = reconIntf.createReconciliationEvent(sObjectName, finalMap, true);
System.out.println("Recon Key--" + l1);
else
System.out.println("ignore event ---" + finalMap.toString());
list.add(finalMap.get("User Id"));
System.out.println(list.size() + "add--" +finalMap.get("User Id") );
finalMap.clear();
catch (Exception exception)
exception.printStackTrace();
public boolean stop(){
String s = "stop()";
//logger.setMethodStartLog(classname, s);
//logger.info(classname, s, "Stopping Reconciliation........");
isReconStopped = true;
//logger.setMethodFinishLog(classname, s);
return true;
FileFilter fileFilter = new FileFilter()
public boolean accept(File file)
String sFilePath = file.getName();
if( sFilePath.startsWith(FileName) )
return true;
else
return false;
public String getFile() throws FileNotFoundException, Exception{
String s = "getFile()";
//logger.setMethodStartLog(classname, s);
String s1;
File dir = new File(FileDirectory);
File[] files = dir.listFiles(fileFilter);
if (files.length ==0)
throw new FileNotFoundException();
if (files.length>1)
throw new Exception("Multiple Matches found for this file name");
s1 = files[0].toString();
//logger.setMethodFinishLog(classname, s);
return s1;
public HashMap readLookup(String s1){
String s = "readLookup()";
//logger.setMethodStartLog(classname, s);
HashMap map = new HashMap();
try {
tcResultSet tc1= lookupIntf.getLookupValues(s1);
int i = tc1.getRowCount();
for (int j = 0;j<i;j++){
tc1.goToRow(j);
map.put(tc1.getStringValue("Lookup Definition.Lookup Code Information.Code Key"), tc1.getStringValue("Lookup Definition.Lookup Code Information.Decode"));
catch (tcAPIException tcapiexception){
tcapiexception.printStackTrace();
//logger.error(classname, s, tcapiexception.toString());
//logger.setStackTrace(tcapiexception, classname, s, tcapiexception.getMessage());
catch (Exception excep){
excep.printStackTrace();
//logger.error(classname, s, excep.toString());
//logger.setStackTrace(excep, classname, s, excep.getMessage());
return map; -
OIM 11g error while running the scheduler
Hi All,
we have created on few custom schedulers to carry out trustetd recon and doing the create , modify and delete operations on OIM entities. all were running fine earlier. Now we started facing the below error while running any scheduler. Please find the OIM diagonostic logs below.
scheduler status is not changing to running and scheduler logs and events r also not getting generated. please find the logs below.
2012-09-04T11:03:38.355+05:30] [oim_server1] [NOTIFICATION] [IAM-0080006] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] Orchestration process moved to failed stage, and the corresponding error is - {0}[[
oracle.iam.platform.kernel.EventFailedException: Operation - UNSCHEDULE that is submitted as part of the orchestration is not supported.
Completed orchestration with action result - oracle.iam.platform.kernel.EventFailedException: Operation - UNSCHEDULE that is submitted as part of the orchestration is not supported.
[2012-09-04T11:03:38.430+05:30] [oim_server1] [NOTIFICATION] [IAM-1010010] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] ********** Entering the Authorization Segment with parameters:: LoggedInUserId = 1, target resourceID = null, Feature = SCHEDULER, Action = JOB_MODIFY **********
[2012-09-04T11:03:38.430+05:30] [oim_server1] [NOTIFICATION] [IAM-1010029] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] OES Results found in cache with Key F: SCHEDULERS: 1P: JOB_MODIFYOESDefinition
[2012-09-04T11:03:38.431+05:30] [oim_server1] [NOTIFICATION] [IAM-1010021] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] Validating the Internal Obligations: [InternalObligation: name: noop, values: [true], convertToObligation: false, InternalObligation: name: noop, values: [true], convertToObligation: false]
[2012-09-04T11:03:38.431+05:30] [oim_server1] [NOTIFICATION] [IAM-1010022] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] ---------- The list of Internal Obligation is satisfied, returning TRUE ----------
[2012-09-04T11:03:38.431+05:30] [oim_server1] [NOTIFICATION] [IAM-1010026] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] ********** Exiting the Authorization Segment with result Decision :PERMIT[[
Obligations from policy: **********
[2012-09-04T11:03:38.598+05:30] [oim_server1] [NOTIFICATION] [IAM-0080013] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] Kernel executing default validation with process id, event id, entity and operation 709,251.0.JobDetails.UPDATE
[2012-09-04T11:03:38.875+05:30] [oim_server1] [NOTIFICATION] [IAM-0080014] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] Kernel executing default action handler with process id, event id, entity and operation 709,251.2,295,568.JobDetails.UPDATE.entityId=null
[2012-09-04T11:03:38.875+05:30] [oim_server1] [NOTIFICATION] [IAM-0080001] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] An error occurred while executing the kernel event handler.[[
oracle.iam.platform.kernel.EventFailedException: Operation - UPDATE that is submitted as part of the orchestration is not supported.
at oracle.iam.platform.kernel.impl.EntityDefaultActionHandler.execute(EntityDefaultActionHandler.java:53)
thanks.I got one similar issue before. In my case was with event handler. It was a sintax issue.
Example:
I wrote this: <action-handler Class="...
instead of this: <action-handler class="...
So, in your case III suggest you to check if have any plugin invalid syntax and re-import your schedule task plugin.
<oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<plugins pluginpoint=.....
<plugin pluginclass= .....
</plugin>
Let me know if you have any doubt.
I hope this helps,
Thiago Leoncio. -
Error while running scheduled task
Im getting this error when I am running a scheduled task for adding all users to a group if they are managers:
Error while running task: Thor.API.Exceptions.tcAPIException: [EJB:010160]Security Violation: User: '<anonymous>' has insufficient permission to access EJB: type=<ejb>, application=Xellerate, module=xlDataObjectBeans.jar, ejb=tcGroupOperations, method=addMemberUser, methodInterface=Remote, signature={long,long}.
any idea?no luck.
im getting following errors:
updatamanagergroup.java:3: package Thor.API.Operations does not exist
import Thor.API.Operations.*;
^
updatamanagergroup.java:4: package Thor.API does not exist
import Thor.API.tcResultSet;
^
updatamanagergroup.java:5: package Thor.API does not exist
import Thor.API.tcUtilityFactory;
^
updatamanagergroup.java:6: package com.thortech.xl.crypto does not exist
import com.thortech.xl.crypto.tcCryptoUtil;
^
updatamanagergroup.java:7: package com.thortech.xl.scheduler.tasks does not exist
import com.thortech.xl.scheduler.tasks.SchedulerBaseTask;
^
updatamanagergroup.java:8: package com.thortech.xl.util.config does not exist
import com.thortech.xl.util.config.ConfigurationClient;
^
updatamanagergroup.java:13: cannot find symbol
symbol: class SchedulerBaseTask
public class updatamanagergroup extends SchedulerBaseTask
^
and so on....
23 errors
Edited by: user11136275 on Dec 24, 2009 12:22 AM -
Error when trying to change scheduling agreement
Hi gurus,
I have created a scheduling agreement via me31l and all is ok.
I'm finding an issue when trying to change the agreement via me32l.
If i add a new item and save, all seems ok, but the new item is note created and the below error is raises (sm13):
Function Module: RV_KONDITION_SICHERN_V13A
Status: Update was terminated
Report: LV13AU02
Row: 209
Error details: Class: VK - Number: 211
VK 211: UPDATE error Table KONM. Return code 4
The curious thing is that if we add an item with the same material, the error is not raised and the scheduling agreement is properly updated.
Could you suggest me how to solve this issue?
Thanks in advance,
ValentinoHi RAVI,
the issue was solved with the maintenance of material inforecord. There was only one price condition mainteined with the flag "scales"... We have removed the flag from the interested material, then it has been possible to change and create scheduling agreements.
Thanks & Regards,
Valentino -
I have Lightroom 3 and have installed it on my Retina iMac running Yosemite. It will not show me any of the modules..error when attempting to change modules.. and keeps asking for my serial number every time. Is it compatible?
DavidThis is a duplicate thread - see here
-
Error to change the scheduling agreement
after creating the scheduling agreement, i tried to modify the scheduling agreement that does not have a Delivery Schedule using ME32L. and I got an Error message FGV004 - "SYST:date 00.00.0000 is not expected". however, if i updated the delivery schedule, i didn't get the error message when I modified the scheduling agreement. any suggestion?
Hi AP,
the question is the smiliar, but I'm looking for notes in MM area, not FM area.
Elaine -
Delivery Date needs to be changed on Schedule lines
Hi All-
I am using BAPI_SALESORDER_CHANGE, to update the delivery date on the schedule lines...If I have 2 lines of schedule, needs to be updated the second one ETENR '0002'...
Bapi returns message that successfully processed, when I go back and look at Sales order, I don't se any changes on schedule line..
I am pssing into BAPI, sales doc and schedule line with the delivery date and the flag 'U'..and also I am using BAPI commit...
But, let me know if I am missing something and also let me know is it possible to change schedule delivery date or not?
Thanks,
SonyHi
Please follow this process.
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data.
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI. -
Error in running a function to convert coordinates in degrees to decimal for EXCEL VBA
For your information, I have 3 cross-posts regarding this question - and all I can said there is still no firm solution regarding this error.
1) http://stackoverflow.com/questions/27634586/error-in-running-a-function-to-convert-coordinates-in-degrees-to-decimal-for-exc/27637367#27637367
2) http://www.mrexcel.com/forum/excel-questions/826099-error-running-function-convert-coordinates-degrees-decimal-excel-visual-basic-applications.html#post4030377
3) http://www.excelguru.ca/forums/showthread.php?3909-Error-in-running-a-function-to-convert-coordinates-in-degrees-to-decimal-for-EXCEL-VB&p=16507#post16507
and the story of the error is as below:
Currently I am working on VBA excel to create a widget to verify coordinates whether it lies under the radius of ANOTHER predefined and pre-specified sets of coordinates.
In the module, I want to convert the coordinates from degrees to decimal before doing the calculation - as the formula of the calculation only allow the decimal form of coordinates.
However, each and every time I want to run the macros this error (Run-time error '5', invalid procedure call or argument) will appear. Then, the debug button will bring me to below line of coding:
degrees = Val(Left(Degree_Deg, InStr(1, Degree_Deg, "°") - 1))
For your information, the full function is as below:
Function Convert_Decimal(Degree_Deg As String) As Double
'source: http://support.microsoft.com/kb/213449
Dim degrees As Double
Dim minutes As Double
Dim seconds As Double
Degree_Deg = Replace(Degree_Deg, "~", "°")
degrees = Val(Left(Degree_Deg, InStr(1, Degree_Deg, "°") - 1))
minutes = Val(Mid(Degree_Deg, InStr(1, Degree_Deg, "°") + 2, _
InStr(1, Degree_Deg, "'") - InStr(1, Degree_Deg, "°") - 2)) / 60
seconds = Val(Mid(Degree_Deg, InStr(1, Degree_Deg, "'") + _
2, Len(Degree_Deg) - InStr(1, Degree_Deg, "'") - 2)) / 3600
Convert_Decimal = degrees + minutes + seconds
End Function
Thank you.
Your kind assistance and attention in this matter are highly appreciated.
Regards,
Nina.You didn't give an example of your input string but try the following
Sub test()
Dim s As String
s = "180° 30' 30.5""""" ' double quote for seconds
Debug.Print Deg2Dec(s) ' 180.508472222222
End Sub
Function Deg2Dec(sAngle As String) As Double
Dim mid1 As Long
Dim mid2 As Long
Dim degrees As Long
Dim minutes As Long
Dim seconds As Double ' or Long if only integer seconds
sAngle = Replace(sAngle, " ", "")
mid1 = InStr(sAngle, "°")
mid2 = InStr(sAngle, "'")
degrees = CLng(Left$(sAngle, mid1 - 1))
minutes = CLng(Mid$(sAngle, mid1 + 1, mid2 - mid1 - 1))
seconds = Val(Mid$(sAngle, mid2 + 1, 10)) ' change 10 to 2 if only integer seconds
Deg2Dec = degrees + minutes / 60 + seconds / 3600
End Function
As written the function assumes values for each of deg/min/sec are included with unit indicators as given. Adapt for your needs.
In passing, for any work with trig functions you will probably need to convert the degrees to radians. -
Error while running the Report
Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
<b><b>Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .</b></b>
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
NaitikNaitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill -
Error while adding a job to scheduler
Hello,
I have a batch job that is running fine in both DEV and QA environment. In DEV, I am able to schedule and run it daily. I created a similar schedule in QA environment using BODS Mgmt Console/Administrator. However, upon Activating the schedule, I am getting the following error message. Would someone know why would this error be thrown and steps to troubleshoot this error?
Thanks.
[Repository:AECON_DW_REPOSITORY Schedule:Daily_Run_QA Error:Error while adding a job to scheduler]
When contacting the server above exception was encountered, so it will be assumed the schedule is not active anymore.Hi Rizwan Tahir ,
Delete the job server associated with the current batch job and recreate it.
Then try creating a new schedule using the new job server.
And take care that job server is created in QA environment.
Hope this should work.
Regards, -
Error when running crystal report
i saw the error in log file 'Only TrueType fonts are supported. This is not a TrueType font' and 'Error while running Crystal report'
Help me to fix this problem.Thanks inadvanced.
I used some software developed in vb6.It changed some system font when running :D.
i want to run both that soft and sap.Hi,
Please refer to the link, [Re: CR XI R2, Crystal Report Viewer Opentype Font not supported|Re: CR XI R2, Crystal Report Viewer Opentype Font not supported].
What is the version of your crystal report, we will try to apply some service packs.
Regards,
Clint
Maybe you are looking for
-
Cycle Count Scheduling in 11.5.9
Running a cycle count by period. Cycle count was established to start on 27-Aug-07. Created the Perform full cycle count (Report Set) which runs every month...however in September the auto schedule in the cycle count form has the next date as 24-Sep-
-
I have a Bluetooth receiver transmitter by Brookstone attached to the home stereo that we use to connect via bluetooth and play music from Pandora etc. From our iPhones or iPad. It has worked flawlessly until I updated the software on my iPad and iP
-
Basic auth in proxy server breaks managed server form auth
Hi, I have a proxy server configured in front of 2 managed servers. The managed servers have secure pages and are using form auth and the proxy server is working properly. In other words, I point my browser at the proxy and I end up being services by
-
Change color scheme of Terminal in XFCE4 ? *SOLVED*
The default install of XFCE4 has a terminal with black text on white background. I find it a bit too bright, and its not as easy on the eyes as white text on black bg. When I used to use KDE, the terminal came with 'themes', one of them being 'linux
-
Bluetooth problem .. help
hi, i have a bold 9000 and my problem is that when i'd like to send something such as a picture, song..etc. my blackberry wont get the connection from the laptop, BUT when i send something from my blackberry to the laptop it accepts it right away..wh