Error in scheduling a single mapping

Hi everyone,
I am new to owb and i am scheduling a single mapping and i successfully deploy it and run it. In the control center i see that the job has ran successfully but no records were inserted. Then i went into the OEM to see the job and it shows that the job failed with the following error:
ORA-20001: Begin. initialize complete. workspace set. starting operator. execute_in_background complete. set_job_argument_value complete. l_job_audit_execution_id= 16548. ORA-20001: Please check execution object is deployed correctly. ORA-01403: no data found ORA-06512: at "USER7.PMAP_TLOG_JOB", line 180 ORA-20001: Please check execution object is deployed correctly. ORA-01403: no data found
Can any one help me on this error?
Infact i have succesfully scheduled a process flow. This problem only occurs when i attach the scheduler to a single mapping.
Thanks & Regards
Subhasree

Hi Nawneet,
Any suggestions?
can anybody else also help me in this error???
Regards
Subhasree

Similar Messages

Error in scheduling a mapping with sqlloader ctl file

Hi everyone,
I have been trying to schedule a single mapping which generates sqlloader ctl file. but i get the error
ORA-20001: Begin. initialize complete. workspace set. l_job_audit_execution_id= 20545. ORA-20001: Please check execution object is deployed correctly. ORA-01403: no data found ORA-06512: at "USER7.PMAP_TLOG_JOB", line 180 ORA-20001: Please check execution object is deployed correctly. ORA-01403: no data found
but when i attach this mapping with a process flow it works fine. There is no error.
so my question is in OWB is it a must that we should attach the mapping which generates sqlloader ctl file to a process flow and then schedule it or can we schedule a single mapping which generates sqlloader ctl file and what should be the process to schedule a single mapping which generates sqlloader ctl file?
can anyone please help?
Thanks & Regards
Subhasree

Hi Nawneet,
Any suggestions?
can anybody else also help me in this error???
Regards
Subhasree

Error while Scheduling Java Jobs - IDM

Hi
I am getting the below error when I try to schedule a Java Job for every hour or every minute. However the same job runs perfectly fine when I put in On Demand and run it manually. I even tried with the Dummy Job and it spits the same error. Below is the error that I found in the error log.
Error setting schedule time: Too many nested levels
Any help is appreciated.
Thanks
Sasi Reddy

Hi,
I think you have session count problem, you can change your http sessions count and if you have a db system db session count. In additional check your java code do you close the sessions in java?
Best regards.

Error while Scheduling Full DB back up?

Hi gurus,
I got error while schedule full DB back up. I am follow all the steps.but i got this error.
1. go to DB13
2. select Day
3.select full DB backup
4.select time
5.select sid, msdb,inttape,verify backup
5.add.
our DB is MS-SQL server Data Base
client :222   user: admin
error: User not connected
2008-04-10 14:28:06.89 Server      Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
     Apr 14 2006 01:12:25
     Copyright (c) 1988-2005 Microsoft Corporation
     Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2008-04-10 14:28:06.89 Server      (c) 2005 Microsoft Corporation.
2008-04-10 14:28:06.89 Server      All rights reserved.
2008-04-10 14:28:06.89 Server      Server process ID is 308.
2008-04-10 14:28:06.89 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2008-04-10 14:28:06.89 Server      This instance of SQL Server last reported using a process ID of 308 at 4/10/2008 2:24:10 PM (local) 4/10/2008 8:54:10 AM (UTC). This is an informational message only; no user action is required.
2008-04-10 14:28:06.89 Server      Registry startup parameters:
2008-04-10 14:28:06.89 Server            -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2008-04-10 14:28:06.89 Server            -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2008-04-10 14:28:06.89 Server            -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2008-04-10 14:28:06.90 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2008-04-10 14:28:06.90 Server      Detected 8 CPUs. This is an informational message; no user action is required.
2008-04-10 14:28:07.06 Server      Set AWE Enabled to 1 in the configuration parameters to allow use of more memory.
2008-04-10 14:28:07.20 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2008-04-10 14:28:07.21 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server      Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server      Database mirroring has been enabled on this instance of SQL Server.
2008-04-10 14:28:18.89 spid4s      Starting up database 'master'.
2008-04-10 14:28:18.96 spid4s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2008-04-10 14:28:19.00 spid4s      SQL Trace ID 1 was started by login "sa".
2008-04-10 14:28:19.01 spid4s      Starting up database 'mssqlsystemresource'.
2008-04-10 14:28:19.04 spid4s      The resource database build version is 9.00.2047. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid4s      Server name is 'ERPPRD'. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid9s      Starting up database 'model'.
2008-04-10 14:28:19.29 spid9s      Clearing tempdb database.
2008-04-10 14:28:19.37 spid9s      Starting up database 'tempdb'.
2008-04-10 14:28:19.39 spid9s      Analysis of database 'tempdb' (2) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:19.40 spid12s     The Service Broker protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s     The Database Mirroring protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s     Service Broker manager has started.
2008-04-10 14:28:19.42 Server      A self-generated certificate was successfully loaded for encryption.
2008-04-10 14:28:19.43 Server      Server is listening on [ 'any' <ipv4> 1433].
2008-04-10 14:28:19.43 Server      Server local connection provider is ready to accept connection on [
.\pipe\SQLLocal\MSSQLSERVER ].
2008-04-10 14:28:19.43 Server      Server named pipe provider is ready to accept connection on [
.\pipe\sql\query ].
2008-04-10 14:28:19.43 Server      Server is listening on [ 127.0.0.1 <ipv4> 1434].
2008-04-10 14:28:19.43 Server      Dedicated admin connection support was established for listening locally on port 1434.
2008-04-10 14:28:19.43 Server      The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2008-04-10 14:28:19.43 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
2008-04-10 14:28:19.48 spid21s     Starting up database 'msdb'.
2008-04-10 14:28:19.48 spid23s     Starting up database 'SRM'.
2008-04-10 14:28:19.48 spid22s     Starting up database 'PRD'.
2008-04-10 14:28:20.29 spid23s     Analysis of database 'SRM' (6) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.40 spid22s     Analysis of database 'PRD' (5) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s      Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s      Recovery is complete. This is an informational message only. No user action is required.
2008-04-10 14:28:26.37 spid51      Using 'xpsqlbot.dll' version '2005.90.2047' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.53 spid51      Using 'xpstar90.dll' version '2005.90.2047' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.57 spid51      Using 'xplog70.dll' version '2005.90.2047' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
2008-04-11 00:00:56.75 spid17s     This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
2008-04-11 16:44:23.89 spid112     DBCC CHECKDB (PRD) started at Apr 11 2008 4:44PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 16:52:47.53 spid107     DBCC CHECKDB (PRD) started at Apr 11 2008 4:52PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 17:00:01.48 spid115     DBCC TRACEON 3605, server process ID (SPID) 115. This is an informational message only; no user action is required.
2008-04-11 17:00:10.45 spid115     Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:10.45 spid115     BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:10.67 Backup      Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:10.65 Backup      Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:10.65 Backup      BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:11.18 Backup      Tape 'Media created 3/29/2007 at 2:43 PM' was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.54 spid101     DBCC TRACEON 3605, server process ID (SPID) 101. This is an informational message only; no user action is required.
2008-04-11 17:00:15.60 spid101     Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:15.60 spid101     BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:15.60 Backup      Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.60 Backup      Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:15.60 Backup      BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:15.60 Backup      Unnamed tape was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:02:57.57 spid114     DBCC CHECKDB (PRD) started at Apr 11 2008 5:02PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 18:30:37.75 spid112     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 46 minutes 14 seconds.
2008-04-11 18:54:52.10 spid114     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 51 minutes 55 seconds.
2008-04-11 18:55:25.00 spid107     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 2 hours 2 minutes 38 seconds.
2008-04-12 00:00:30.75 spid17s     This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
This is error
anybody help me.
Regards,
balaram
Edited by: balaram reddy on Apr 14, 2008 8:44 PM

If your ECC6 is on SP12 and above, use t-code : DBACOCKPIT or DB13OLD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0dc0752-2502-2a10-2a93-94823467ca79

Error while scheduling VerifyDB in DB13

Hi,
I am facing an error while scheduling VerifyDB through DB13 in my SAP ECC 6.0 system. This problem is occuring in the entire landscape(Dev, Quality & Prod) after i did an oracle upgrade from 10.1.0.4 to 10.2.0.2. The error is as below:
BR1301W Error message from likeywlib:
===...could not load SSF library libsapsecu.so .
BR1301W Error message from likeywlib: likey_init: Couldn't load SAPSECULIB ("libsapsecu.so") using function SsfSupInit (), rc = 10.
BR1302E Initialization of license key library likeywlib failed, return code 1
BR0602E No valid SAP license found - please contact SAP
I also checked the note 912969 which gives the below solution:
The error is corrected in BRSPACE 7.00 patch 10
But the BRSPACE is already on a higher patchset (18). Patch 10 is already applied.
Can somebody please guide me on this.
Thanks & Regards,
Smitha

Hi Andreas,
the error is exactly the same.
The database is Oracle 10.2.0.2 and the backup is performed with a mix of BRtools and Legato.
Any idea?
Thanks
Gianluca

Error while scheduling through web service

We have created Web service through WSDL of OBI Publisher. Also we created a web service proxy client to call the services offered by OBI Publisher. We actually want to "Automate the Scheduling of Reports" according to our requirement:
1. We used to schedule the reports manually by giving the parameters(used to populate data in reports) and other fields like select report name, report destination, format of reports ( .pdf, .docx,etc) through Oracle BI Publisher.
2. As there are thousands of permutations of report input parameters possible, so it is difficult to schedule them manually.
3.We also want to schedule report to a particular folder according to some parameter, for the ease of the user visibility.
Above requirements are not currently available with Oracle BI Publisher.
We are getting error while scheduling through ScheduleRequest class.
The client.java is as follows:
public class ScheduleServiceClient
@WebServiceRef
private static ScheduleService_Service scheduleService_Service;
public static void main(String [] args)
    scheduleService_Service = new ScheduleService_Service();
    ScheduleService scheduleService = scheduleService_Service.getScheduleService();
    // Add your code to call the desired methods.
    try {
                FTPDeliveryOption ftpdo =new FTPDeliveryOption();
                ftpdo.setFtpServerName("ServerName");
                ftpdo.setFtpUserName("Username");
                ftpdo.setFtpUserPassword("Password");
                ftpdo.setRemoteFile("/path/TestFile");
                ftpdo.setSftpOption(true);
                List<FTPDeliveryOption> listobj=new ArrayList<FTPDeliveryOption>();
                listobj.add(ftpdo);
                ArrayOfFTPDeliveryOption ar =new ArrayOfFTPDeliveryOption();
                ar.setItem(listobj);
                DeliveryChannels dc = new DeliveryChannels();
                dc.setFtpOptions(ar);
                ScheduleRequest scheduleRequest = new ScheduleRequest();
                scheduleRequest.setDeliveryChannels(dc);
                scheduleRequest.setJobLocale("en-US");
                scheduleRequest.setUserJobName("Job_1_WebService");
                scheduleRequest.setDataModelUrl("Url");
                scheduleRequest.setStartDate("Mar 27, 2015 12:40:00 PM");
                scheduleRequest.setJobTZ("[GMT+05:30] Calcutta, Chennai, Mumbai, New Delhi");
                String userID = "BI_Publisher_Username";
                String password = "BI_Publisher_Password";
                scheduleService.scheduleReport(scheduleRequest,userID,password);
            } catch(Exception exception) {
                exception.printStackTrace();
Snapshot of error is attached.
Kindly suggest the way of getting out of this error.

Hi
Check this thread
WD Message Manager
Reward opints if usefull....

Error while activating any message mapping in IR: very strange

hi forum i m getting an error in IR while activating any messageMapping.
the error is too long to be posted....i m posting a few lines of that:
     Internal error while checking object Message Mapping MM_sdptestFileToFile | http://sdzpoc.com.test/sdptest (ZPOC_TEST, 1.0 of zpoctest); see details (CHECK_EXCEPTION)
     Internal error while checking object Message Mapping MM_sdptestFileToFile | http://sdzpoc.com.test/sdptest (ZPOC_TEST, 1.0 of zpoctest); see details (CHECK_EXCEPTION)
     /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))
     /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))

Sudeep,
Let we try this way. I'm sure you might have some existing mapping objects in IR.
Try to change that object(Description give some name) and activate again the object.
Reply your results whether you are getting the same error.
One sec before changing the object just test the mapping and change the object.
Best regards,
raj.

BAPI Error: No schedule lines due for delivery up to the selected date

Hi,
I have created a program to create delivery orders with reference to sales orders using BAPI - BAPI_OUTB_DELIVERY_CREATE_SLS.
After execution I get the error: No schedule lines due for delivery up to the selected date
Please help.
Thanks in advance!!!
Regards,
Sriram

hi,
this is to inform you that,
please check the schedule line date in the sales order because the date is not matching here for the BAPI to upload.
here, for example the schedule line is 4 days after and you are running BAPI today. that will mismatch no.
the same thing is happening in uploading case also.
so please check the date.
because in teh sales order if teh schedule line date is today it will accept the uploading with out throwing any errors.
regards,
balajia

FILE not found error: j2ee/home/applib/applications-mapping.xml (No such fi

Hi EveryBody
i have my applications-mapping.xml file already in the applib directory, but when i try to conect to a remote ejb i had this error[b]
FILE not found error: j2ee/home/applib/applications-mapping.xml (No such file or directory)
can anyone help??

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

Error -Job scheduling

Hi
I am getting the following error while scheduling job using OEM:
SQL*Plus: Release 9.2.0.1.0 - Production on Wed Jun 8 12:22:36 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter user-name: ERROR:
ORA-28009: connection to sys should be as sysdba or sysoper
Enter user-name: Enter password: ERROR:
ORA-01005: null password given; logon denied
Enter user-name:
ora-28009: connection to sys should be as sysdba or sysoper
Can anybody help me in resolving this issue.
TIA
Aqueel.

Don't connect as SYS, it should not be used for such daily tasks. Use a non-SYSDBA user, if you use SYS it must be a connection as SYSDBA (9i and higher), this is not possible in all OEM areas, so this error message occurs.

Error message "Error when scheduling the query(JOB_CLOSE)".

Hi all,
While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
Could you please find what this error is?
Thanks,
Uday.

Hi Uday,
This problem can occur if you changed the query definition.
In this case the query definition would be inconsistent with the existing extract structure.
Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
to delete.
After this you could use the same table name for any further extract that you need to create.
One caution is that the extract table should not be deleted through any other transaction before you run the report.
Rgds,
Colum

Error when scheduling job (JOB_SUBMIT) when execute PC in WAD

Dear BIers,
I execute a Process Chain in commond button of WAD, however, I got the error message:
Job BI_PROCESS_DTP_LOAD could not be scheduled. Termination with returncode 8
Returncode '8' means ' Error when scheduling job (JOB_SUBMIT).
Any suggestions are appreciated.
B.R
Gerald

Dear Raju,
Have you checked SM21? Maybe you have a problem with your TemSe object. If this is the case a basis guy should know how to handle it.
Greetings,
Stefan

How can we see multiple devices on a single map using find my ipad?

We have 70 iPad/iPhone devices that we want to locate at any given time. How can we display them on a single map?

if they use the same appleID then you can do it at www.icloud.com

Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2. I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message. This only started happening yeste

Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2. I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message. This only started happening yesterday. Anyone else having this problem? Thanks.

I am having the same problem and took the following steps to mitigate it to no avail.
1. I deleted the Facebook app on the phone and turned off Facebook in the iPhone's system-wide settings.
2. I re-enabled Facebook in the iPhone's system-wide settings and reinstalled the Facebook app and logged in again. It worked. For about an hour.
3. I completely restored the phone to a previous backup (before the problems started) and reenabled Facebook .... reinstalled the app.... and now it works intermittenly. But it hasn't worked in about 12 hours now (just tried a few minutes ago).
Please advise.

Error while running code template mapping between two oracle tables

Hello All
Iam getting the following error while running code template mapping between two oracle tables. Using OWB 11gR2 and oracle 11gR2 DB.
java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
c: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
ORA-06512: at line 4
Job 51 error: java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
ORA-06512: at line 4
Quick help is highly appreciated.

Dera Dallan
its only a target user for the workspace where you are deploying the mapping from.
I have two repositories for two different projects. each repositary has its own workspace.
ex:-
Project 1
Work space bpms_rep_owner
Repositary owner bpms_rep_owner
Repositary user bpms_rep_user
Project 2
Work space dem_rep_owner
Repositary owner dem_rep_owner
Repositary user dem_rep_user
Reg
S.Gyazuddin

Error in scheduling a single mapping

Similar Messages

Maybe you are looking for