Error in Seeburger acknowledgement mappings

Hello,
I am trying to configure 850 Orders Inbound scenario and i did the configuration as explained in blog.
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/15113. [original link is broken] [original link is broken] [original link is broken]
For testing I am creating file for 997 ack message.
My scenario is working correctly but it is giving following error in Seeburger std ack and 997 mappjng
Cannot create target element /LIST/S_ISA/S_GS/S_ST/S_AK9.
I checked the payload generated by Seeburger modules and found that the segment Funcitonal Group Trailer was missing which was why this mapping was failing. This segment is optional in Seeburger Std ack mapping while its mandatory in 997 message. It describes about Number of Transaction sets received.
any idea why this is not getting generated by standard Seeburger modules?
Thanks in advance.
regards
rajeev

Hello,
The problem was resolved when I compared the outputs of one of the outbound scenario files that we were generating and the one which was coming in.
You guessed right it was due to missing trailer segment in inbound message. However, the Seeburger modules should have given some logical warnings or errors :).
regards
rajeev

Similar Messages

Error in Seeburger Message Monitoring

Hi ,
I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file.
I m getting error in seeburger message monitoring with status as "Could not send ansynchrone MDN to partner - url not set!". can anybody tell me whats the reason behind it,where it went wrong.

Really didn't understand your scenario. That sentence makes no sense:
"I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file."
But what I understand from the error message you have provided...................
if you are using Seeburger AS2 adapter as Receiver Comm Channel..........then there is definitely some cofig error is settings for MDN acknowledgement.
Under Parameters Tab:
You must have set the following parameter
MDN Mode = "ASYNC"
And has not provided the following parameter just below it :
Receipt Delivery Address
This parameter should have value: the URL of your own AS2
server where the asynchronous MDNs are
to be delivered.
Hope this solves your problem.
Regards,
Suddha

BPM for error handling and acknowledgements

Hi,
Can any one tell me how to handle BPM for error handling and acknowledgements in one scenario.
Please send me the link if you have other wise give me the solution on the same.
Thanks,
Nagesh

Hi !
Just check out these links This might help you.
Usually Application Level Acknowledgement is considered during Sync communication. If you are using RFC, you can make use of Sync communication. So you can handle it without bpm, provided your both sender and receiver are sync interfaces.
To know about Ack-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
you can not dirrectly access the content of the ACK, however the BPM shows different behaviours based on the ACK status. E.g. if the ACK contains a success message the BPM will continue in its normal process, if the ACK contains a permanent error, it will either stop or go through an exception branch (provided such a branch has been defined). Have a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm It doesnt"t state the above mentioned behaviour in detail but says that you need to define an exception branch.
The trickiest part is always to find out, when you will get a transient vs. as permanent error ack. If you are using ACKs with Proxies refer also to this link http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm and this http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
The following link has entire configuration of Receiver XI Adapter (including acknowledgements)
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
 eror handling in BPM.

1. CCMS monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
2. BPM Monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
3. Monitoring XML Messages http://help.sap.com/saphelp_nw04/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/frameset.htm
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Also see the below BPM related links
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Thanks !!!
Regards
Abhishek Agrahari
Questions are welcome here!!
Also mark helpful answers by rewarding points

AS2 adapter-- Module tab configuration to call seeburger std mappings..!

Hi Experts,
Seeburger has been installed and i want to use AS2 adapter to make use the seeburger standard mappings.
When i opened the module tab, its been found that for
Sender AS2 adapter:
Module Name                                     Module Key
localejbs/Seeburger/solution/as2             solutionid
localejbs/CallSapAdapter                         exit
Module configuration
_Modulekey      ParameterName               ParameterValue_
Solutionid           Mappingname               SEE_ORDERS_UN_...
can i use the above steps??
Is solutionid is enough to call the seeburger mapping?
or
do i need to use the Bic module to call the seeburger std mapping like below?
Module Name                                    Module Key
localjbs/CallBicXIRaBean                         bic
Module configuration
Modulekey     ParameterName               Parameter Value
Bic               Mappingname              SEE_ORDERS_UN_...
Kindly let me know.
Regards
Krupa.

HI,
For module configuration for As2 refer the below help.
Sender configuration:
AS2 identifier is the party identified which will be provided by the WAN network provider.
Under the party identifiere tab
Agency will be seeburger
Scheme=AS2ID
Name = WAN network no of the partner who is sending the file
Few changes in the module parameter tab.
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_E2X_EDIFACT_ORDERS_UN_D93A
Receiver AS2 adapter configuration:
When the adapter is used in a receiver channel, it obtains a message from the Integration Engine and sends it to a business partner. In this case, the following steps are required:
1. Define the channel as a Receiver channel on the Parameters tab
2. The last step ensures the module sequence is complete:
Make sure the module ModuleProcessorExitBean does exist in the module sequence:
Module Name=localejbs/ModuleProcessorExitBean
Type=L
Module Key=Exit
with the following module parameter:
Module Key=Exit
Parameter Name=JNDIName
Parameter Value=deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
Refer the below thread which has the same discussion.
Re: Pls.. Help Needed.. Seeburger Mapping Names..!!
Thanks and Regrds,
Chirag

Error in the Acknowledgment

Hi,
Can anyone help me?
I have a scenario of ABAP Proxy - PI - Web Service. This is an asynchronous interface and the message is being sent from sender to receiver system. The problem is, I'm receiving an error in the acknowledgment with status AckRequestNotSupported.
I want to turn this thing off or make it work for my interface. Could anyone suggest something?
Thank you so much.

Turn off acknowledgements by running report IDX_NOALE.
Read more about acknowledgements [here|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe] or [here|http://wiki.sdn.sap.com/wiki/display/ABAP/HandlingIdocAcknowledgements]

Error in Seeburger BIC Mapping

Hi all,
I am working on Seeburger BIC Mapping Designer.
As i am starting off with it, i have planned to do a very simple scenario File to file.
Source would be an XML and target also would be an xml.
Compilation is fine, but while converting I am gettuing an error
"[Error:ID=2023;LEVEL=1] InhouseDocReader readNextSegment(): offset[4(read Segment : KA\)]: caught ReadingException: Length limit exceeded - no SEG. delim. found!!!
DESCRIPTION: InhouseDocReader causes an ReadingException while trying to read the next segment of current file, abort
<<ErrorStreamEnd>>
Conversion error "
Please let me know what should be done.
Even I have enabled SetIngnoreCRLF option in the source options.
Cheers,
Karthick

Hi Karthick,
Where do you get this error?
In BICMD ?
Have you created the E2X and/or X2E mapping programs in BICMD tool?
Test it locally in the tool intself before deploying the mappings to XI server.
Follow these steps to create a 1;1 mapping for XML to EDI and EDI to XML conversion program:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b66651-eeea-2b10-e5a6-8459ec30d948;jsessionid=(J2EE3414900)ID2060961950DB01298938248398894809End
Regards,
Ravi

Error with Seeburger Splitter module

Hi all,
I had configured Seeburger Splitter and using seeburger splitter module in file adapter with classifier,convertor and splitter in same sequence.But,while testing i m getting null
error for sender file adapter in communication channel monitoring.It isn't able to process the file placed in directory.
When audit log of same is seen,it shows
ERROR : getXmlContentFromMessage()
ERROR : process()
ERROR : Attempt to process file failed with null
Any inputs why is it so.
Regards,
Anoop

Hello Ravi,
We have seen this issue on a few occasions. It might be related to the ConverterJNI class.
In the defaulttrace file you can check for error such as
Caused by: com.sap.i18n.cp.ConverterRuntimeException........
Got exceptions: null
at com.sap.i18n.cp.ConverterJNI.<clinit>(ConverterJNI.java:46).....
If this is the case, Then the problems is within the Startup Framework. I would advise you to update the Startup Framework as described in note #710914.
Thanks,
David

Error in Seeburger Adapter

Hi Experts,
We are sending a message to a Partner, and i can see the message processed succesfully in the SXMB_MONI and also in the Runtime Workbench, but when i see in the seeburger adapter monitoring for the MDN's i noticed that the message was in Error MIC not verified # MIC values not verified sha1-null. At first i thought the error was related to certificate, but when the message was retried after some time it was sucessfully processed and we got positive MDN's also. Could you please let me know when exactly the Error comes? and what can be done to solve this issue.
Many Thanks.
Edited by: Ravi Kumar Nakerikanti on Aug 13, 2008 4:51 AM

Hi,
You have used the AS2 Message type MDN (Message Disposition Notification).
An MDN may optionally be signed, in which case the recipient can authenticate the sender of the MDN and check its integrity. A valid, signed MDN together with a valid MIC reported by the MDN can be used by the sender of the payload message
But here this validation is failed ...and have raised the error like
"MIC not verified # MIC algorithms not verified [LOC: com.seeburger.as2.component.MDNHandler.parseMDN]"
refer
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_AS2_Spoke_Unit_for_Trading_Partner_Integration.pdf
Thanks
Swarup

Error in Seeburger SFTP receiver in append mode.

Hi,
I am trying to do content conversion in Seeburger SFTP adapter at the receiver side and was successfully able to create the first CSV record.
I am using append mode in receiver adapter.
But when sent another record from sender; I got below error.
Always, first record gets processed successfully then second and subsequent records always fails.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: >> Description: putFile: Target filename <out.txt>; Flags set: appending=<true>; ; Reason: Failed to convert Ace to the native form.>> Details: putFile: Target filename <out.txt>; Flags set: appending=<true>; ; Reason: Failed to convert Ace to the native form.>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMPONENT_ERROR>>Retryable: true>>Fatal: true, >> Description: putFile: Target filename <out.txt>; Flags set: appending=<true>; ; Reason: Failed to convert Ace to the native form.>> Details: putFile: Target filename <out.txt>; Flags set: appending=<true>; ; Reason: Failed to convert Ace to the native form.>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMPONENT_ERROR>>Retryable: true>>Fatal: true
Regards,
Anirudh.

An update.
Error message "Unable to convert ACE to native format" means it is not able to convert A SCII C ompatible E ncoding to the native encoding which is used in file system.
I am unable to make head or tail of it... I am doing content conversion in adapter module tab and have specified Transform.ContentType = text/plain;charset=utf-8
The file which gets generated is of ANSI encoding and doesn't appear to be a problem as it works when the file gets generated for the first time.
Also, it works OK when I use unique file name in receiver adatper where 1 file for each record is generated.
The problem is only in append mode.
When checked in Seeburger RWB, there was inconsistency in file details for messages.
For the successful message, file details were:
File details
Host LTFBG-ANIRUD-PI.com
Path /out
File name OUT.CSV
Remote file name OUT.CSV
Detailed status description PUT command for file <OUT.CSV> has been performed successfully.
whereas, for failed messages it was:
File details
Host LTFBG-ANIRUD-PI.com
Path /out
File name null
Remote file name null
Detailed status description Error on send, will be retried
Could that be product error?
Has anyone faced this problem before?
regards,
Anirudh.
Edited by: Anirudh Vyas on Apr 10, 2009 8:31 PM
Edited by: Anirudh Vyas on Apr 10, 2009 8:45 PM

Error in Seeburger SFTP : Cannot create pending keystore PENDING/SSH_hosts

Hi All,
           I am developing a scenario where my sender is file and receiver is SFTP. It is pass through interface and to achive SFTP i used seeburger SFTP adapter. I generated the public from the certificate and shared the key with SFTP admin.
           Now whe i test the scenario i facing the following error in the SFTP channel @ RWB. The error is
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: putFile: Could not connect to remote host; Reason: SFTP client was not able to connect: com.seeburger.sftp.exception.HostVerificationException: Cannot create pending keystore PENDING/SSH_hosts/>> Details: putFile: Could not connect to remote host; Reason: SFTP client was not able to connect: com.seeburger.sftp.exception.HostVerificationException: Cannot create pending keystore PENDING/SSH_hosts/>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: false>>Fatal: false, >> Description: putFile: Could not connect to remote host; Reason: SFTP client was not able to connect: com.seeburger.sftp.exception.HostVerificationException: Cannot create pending keystore PENDING/SSH_hosts/>> Details: putFile: Could not connect to remote host; Reason: SFTP client was not able to connect: com.seeburger.sftp.exception.HostVerificationException: Cannot create pending keystore PENDING/SSH_hosts/>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: false>>Fatal: false
Has anyone faced the similar problem and resolved it , please help me on the same.
Thanks,
Siva.

Hi Srikanth,
                    I resolved the above error by creating aview in my keystore(nwa) . Now i am facing a new error.
                   The error looks something like this:
                 Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: putFile: Could not connect to remote host; Reason: Unable to establish a connection to SSH server, the authentication has failed. Details: Server returned AUTHENTICATION_FAILED. Check user and key/password-settings.>> Details: putFile: Could not connect to remote host; Reason: Unable to establish a connection to SSH server, the authentication has failed. Details: Server returned AUTHENTICATION_FAILED. Check user and key/password-settings.>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: false>>Fatal: false, >> Description: putFile: Could not connect to remote host; Reason: Unable to establish a connection to SSH server, the authentication has failed. Details: Server returned AUTHENTICATION_FAILED. Check user and key/password-settings.>> Details: putFile: Could not connect to remote host; Reason: Unable to establish a connection to SSH server, the authentication has failed. Details: Server returned AUTHENTICATION_FAILED. Check user and key/password-settings.>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: false>>Fatal: false.
I am using a private key authentication and I gave my SAP PI userid as User and private key as the key present in NWA.
Can you please help me in resolving this error.
Thanks,
Sivarama Krishna

Capturing errors when you run mappings.

Hi all,
Your help is appreciated. Thanks in advance.
My questions are.
1. How do you run mappings using sqlplus and run these mappings as a Batch in windows.
2. How do i capture errors without stopping the batch process. If there are any errors it should write to the error table and go on.
3. I am not using any process flow So i need to now how to call all the mappings one by one and writing the errors to the error table.
4. Does warehouse builder has a built in error table to use. If so how do you use it and what is the table name.
5. If i have to schedule these mappings how do i do it.
6. what is the difference between oem_exec_template.sql and sql_exec_template.sql
I am using owb 10.2 version. Anyone out Please help me out. I really appreciate your help. If you have any sample code too that will help.
Thanks
Danny
Edited by: vdanakon on Sep 19, 2008 10:55 AM

Check these two scripts: sqlplus_exec_background_template.sql and sqlplus_exec_template.sql
They are in OWB_HOME\owb\rtp\sql
About DML Error Logging check http://www.rittmanmead.com/2008/01/31/owb11g-dml-error-logging-and-data-rules/

Converter Error in Seeburger Mapping Designer

Hi,
I try to convert an ANSIX12 document from EDI to XML with the Seeburger Mapping Designer, but I have an error:
Converter Error or Warning:
[Error:ID=2023;LEVEL=1] InhouseDocReader readNextSegment(): offset[1211(read Segment :
)]: caught ReadingException: Length limit exceeded - no SEG. delim. found!!!
DESCRIPTION: InhouseDocReader causes an ReadingException while trying to read the next segment of current file, abort.
If I check the "setIgnoreCRLF" in the "Source Options", the mapping works, but when I deploy the mapping to XI, I have the same error, on the deploy, the map not recognize the "setIgnoreCRLF" within XI.
How can I deploy this check to XI or how I do to mapping ignore the CRLF without the "Source Options"??
Greetings,
Hervey

Hi,
I am also facing same problem.
How did you corrected your file.
Do I need to redeploy my mapping on PI
Regards,
Akshay.

Error sending receipt acknowledgement for 3B2

Hi,
Does anyone know what the following error message mean? Or where to look to resolve this?
Thanks!
Sirisak
Machine Info: (ftilnxtstweb2.forsythe.com)
Description: Unable to create the protocol specific B2B message
StackTrace:
Error -: AIP-51503: General Create Message Error: Error -: AIP-51565: An unexpected error occurred while initializing the XML parser: oracle.xml.parser.schema.XSDException: invalid derivation from base type "rnetReal"
     at oracle.tip.adapter.b2b.exchange.rnif11.RNExchangePlugin.createMessage(RNExchangePlugin.java:1495)
     at oracle.tip.adapter.b2b.msgproc.Acknowledgment.constructAckMsg(Acknowledgment.java:682)
     at oracle.tip.adapter.b2b.msgproc.Acknowledgment.outgoingAckPostCollab(Acknowledgment.java:364)
     at oracle.tip.adapter.b2b.msgproc.Acknowledgment.asyncOutgoingAck(Acknowledgment.java:345)
     at oracle.tip.adapter.b2b.msgproc.Request.handleAck(Request.java:537)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:2163)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2404)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2303)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2258)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:500)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:348)
     at java.lang.Thread.run(Thread.java:534)
Caused by: Error -: AIP-51565: An unexpected error occurred while initializing the XML parser: oracle.xml.parser.schema.XSDException: invalid derivation from base type "rnetReal"
     at oracle.tip.adapter.b2b.exchange.rnif11.RNExchangePlugin.createMessage(RNExchangePlugin.java:1204)
     ... 11 more
Caused by: oracle.xml.parser.schema.XSDException: invalid derivation from base type "rnetReal"
     at oracle.xml.parser.schema.XSDBuilder.buildSchema(XSDBuilder.java:751)
     at oracle.xml.parser.schema.XSDBuilder.build(XSDBuilder.java:457)
     at oracle.xml.parser.schema.XSDBuilder.build(XSDBuilder.java:361)
     at oracle.tip.adapter.b2b.exchange.rnif11.RNExchangePlugin.createMessage(RNExchangePlugin.java:1186)
     ... 11 more

Hi
Please follow Metalinknote 753432.1: Invalid Derivation From Base Type "extension" Error in JDeveloper [ID 753432.1]

Seeburger Adapter - Mappings

Hi,
I'm Using Seeburger AS2 Adapter for B2B Scenario. What type of mapping we can use...Means Message mapping, JAVA Mapping , XSLT Mapping and ABAP Mapping...
and Why?
Thanks and Regards,
SReddy

Hi,
Also see the below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards
Chilla

Error in seeburger interface

I have developed IDOC to AS2 secenerio but while testing i am getting following error
MIC not verified # authentication-failed
I am new in XI please help

check following
Check your channel configuration.
It can also be a problem because of signing certificate , try to check
Edited by: Vikrant Kaushik on Aug 20, 2010 10:59 AM

Error in Seeburger acknowledgement mappings

Similar Messages

Maybe you are looking for